diff options
author | Gabe Black <gabeblack@google.com> | 2014-03-24 21:24:24 -0700 |
---|---|---|
committer | Marc Jones <marc.jones@se-eng.com> | 2014-11-14 07:27:34 +0100 |
commit | 4a12cfe759500e31200ec92677992038f10915ac (patch) | |
tree | 2711cfb6d49ca7cf31fb874b526be2e6fedc3d42 /src/mainboard/google/nyan_blaze/mainboard.c | |
parent | bd5925ab2dfb5bcdecba539b83827d7788bc6808 (diff) | |
download | coreboot-4a12cfe759500e31200ec92677992038f10915ac.tar.xz |
nyan: Move some pinmux and clock/reset configuration to ROM stage.
To enable EFS, we need to be able to talk to the TPM and the EC before the RAM
stage starts. That means we need to set up the pins for those busses, clock
those controllers and take them out of reset.
BUG=None
TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other
changes which implement EFS on nyan, saw EC and TPM communication work when in
vboot.
BRANCH=None
Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191390
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0
Reviewed-on: http://review.coreboot.org/7456
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Diffstat (limited to 'src/mainboard/google/nyan_blaze/mainboard.c')
-rw-r--r-- | src/mainboard/google/nyan_blaze/mainboard.c | 62 |
1 files changed, 3 insertions, 59 deletions
diff --git a/src/mainboard/google/nyan_blaze/mainboard.c b/src/mainboard/google/nyan_blaze/mainboard.c index 11c60ef9bc..dc105c6976 100644 --- a/src/mainboard/google/nyan_blaze/mainboard.c +++ b/src/mainboard/google/nyan_blaze/mainboard.c @@ -39,14 +39,6 @@ static void set_clock_sources(void) * can both run at 400 KHz, but the kernel sets the bus to 100 KHz. */ clock_configure_i2c_scl_freq(i2c1, PLLP, 100); - /* - * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't - * seem to work above around 40 KHz. It's set to run at 100 KHz in the - * kernel. - */ - clock_configure_i2c_scl_freq(i2c3, PLLP, 40); - - clock_configure_source(sbc1, PLLP, 5000); /* * MMC3 and MMC4: Set base clock frequency for SD Clock to Tegra MMC's @@ -78,47 +70,6 @@ static void set_clock_sources(void) static void setup_pinmux(void) { - // Write protect. - gpio_input_pullup(GPIO(R1)); - // Recovery mode. - gpio_input_pullup(GPIO(Q7)); - // Lid switch. - gpio_input_pullup(GPIO(R4)); - // Power switch. - gpio_input_pullup(GPIO(Q0)); - // Developer mode. - gpio_input_pullup(GPIO(Q6)); - // EC in RW. - gpio_input_pullup(GPIO(U4)); - - // SOC and TPM reset GPIO, active low. - gpio_output(GPIO(I5), 1); - - // SPI1 MOSI - pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 MISO - pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 SCLK - pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 CS0 - pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - - // switch unused pin to GPIO - gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); - // I2C1 clock. pinmux_set_config(PINMUX_GEN1_I2C_SCL_INDEX, PINMUX_GEN1_I2C_SCL_FUNC_I2C1 | PINMUX_INPUT_ENABLE); @@ -131,12 +82,6 @@ static void setup_pinmux(void) // I2C2 data. pinmux_set_config(PINMUX_GEN2_I2C_SDA_INDEX, PINMUX_GEN2_I2C_SDA_FUNC_I2C2 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) clock. - pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, - PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) data. - pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, - PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); // I2C4 (DDC) clock. pinmux_set_config(PINMUX_DDC_SCL_INDEX, PINMUX_DDC_SCL_FUNC_I2C4 | PINMUX_INPUT_ENABLE); @@ -268,10 +213,10 @@ static void mainboard_init(device_t dev) CLK_L_SPDIF | CLK_L_USBD | CLK_L_DISP1 | CLK_L_HOST1X | CLK_L_PWM, - CLK_H_EMC | CLK_H_I2C2 | CLK_H_SBC1 | - CLK_H_PMC | CLK_H_MEM | CLK_H_USB3, + CLK_H_EMC | CLK_H_I2C2 | CLK_H_PMC | + CLK_H_MEM | CLK_H_USB3, - CLK_U_I2C3 | CLK_U_CSITE | CLK_U_SDMMC3, + CLK_U_CSITE | CLK_U_SDMMC3, CLK_V_I2C4 | CLK_V_EXTPERIPH1 | CLK_V_APBIF | CLK_V_AUDIO | CLK_V_I2S3 | CLK_V_I2S4 | @@ -292,7 +237,6 @@ static void mainboard_init(device_t dev) i2c_init(0); i2c_init(1); - i2c_init(2); i2c_init(3); setup_kernel_info(); |