pit: Add a "pit" mainboard which is mostly a copy of "snow".

This change adds a pit mainboard which is mostly a copy of snow, except that
mentions of the 5250 were replaced with the 5420, and mentions of snow were
replaced with pit.

Change-Id: I8eb0ce379eb2fa353bb88d5656a0c5e2290afbf0
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3646
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 273 insertions, 0 deletions

diff --git a/src/mainboard/google/pit/mainboard.c b/src/mainboard/google/pit/mainboard.c
new file mode 100644
index 0000000000..11b72c59e0
--- /dev/null
+++ b/src/mainboard/google/pit/mainboard.c
@@ -0,0 +1,273 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/i2c.h>
+#include <drivers/ti/tps65090/tps65090.h>
+#include <cbmem.h>
+#include <delay.h>
+#include <edid.h>
+#include <vbe.h>
+#include <boot/coreboot_tables.h>
+#include <arch/cache.h>
+#include <arch/exception.h>
+#include <cpu/samsung/exynos5420/tmu.h>
+#include <cpu/samsung/exynos5420/clk.h>
+#include <cpu/samsung/exynos5420/cpu.h>
+#include <cpu/samsung/exynos5420/gpio.h>
+#include <cpu/samsung/exynos5420/power.h>
+#include <cpu/samsung/exynos5420/i2c.h>
+#include <cpu/samsung/exynos5420/dp-core.h>
+
+#include "exynos5420.h"
+
+/* convenient shorthand (in MB) */
+#define DRAM_START	(CONFIG_SYS_SDRAM_BASE >> 20)
+#define DRAM_SIZE	CONFIG_DRAM_SIZE_MB
+#define DRAM_END	(DRAM_START + DRAM_SIZE)	/* plus one... */
+
+static struct edid edid = {
+	.ha = 1366,
+	.va = 768,
+	.bpp = 16,
+};
+
+/* TODO: transplanted DP stuff, clean up once we have something that works */
+static enum exynos5_gpio_pin dp_pd_l = GPIO_Y25;	/* active low */
+static enum exynos5_gpio_pin dp_rst_l = GPIO_X15;	/* active low */
+static enum exynos5_gpio_pin dp_hpd = GPIO_X07;		/* active high */
+
+static void exynos_dp_bridge_setup(void)
+{
+	exynos_pinmux_config(PERIPH_ID_DPHPD, 0);
+
+	gpio_set_value(dp_pd_l, 1);
+	gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT);
+	gpio_set_pull(dp_pd_l, GPIO_PULL_NONE);
+
+	gpio_set_value(dp_rst_l, 0);
+	gpio_cfg_pin(dp_rst_l, GPIO_OUTPUT);
+	gpio_set_pull(dp_rst_l, GPIO_PULL_NONE);
+	udelay(10);
+	gpio_set_value(dp_rst_l, 1);
+}
+
+static void exynos_dp_bridge_init(void)
+{
+	/* De-assert PD (and possibly RST) to power up the bridge */
+	gpio_set_value(dp_pd_l, 1);
+	gpio_set_value(dp_rst_l, 1);
+
+	/*
+	 * We need to wait for 90ms after bringing up the bridge since
+	 * there is a phantom "high" on the HPD chip during its
+	 * bootup.  The phantom high comes within 7ms of de-asserting
+	 * PD and persists for at least 15ms.  The real high comes
+	 * roughly 50ms after PD is de-asserted. The phantom high
+	 * makes it hard for us to know when the NXP chip is up.
+	 */
+	udelay(90000);
+}
+
+static int exynos_dp_hotplug(void)
+{
+	/* Check HPD.  If it's high, we're all good. */
+	return gpio_get_value(dp_hpd) ? 0 : 1;
+}
+
+static void exynos_dp_reset(void)
+{
+	gpio_set_value(dp_pd_l, 0);
+	gpio_set_value(dp_rst_l, 0);
+	/* paranoid delay period (300ms) */
+	udelay(300 * 1000);
+}
+
+/*
+ * This delay is T3 in the LCD timing spec (defined as >200ms). We set
+ * this down to 60ms since that's the approximate maximum amount of time
+ * it'll take a bridge to start outputting LVDS data. The delay of
+ * >200ms is just a conservative value to avoid turning on the backlight
+ * when there's random LCD data on the screen. Shaving 140ms off the
+ * boot is an acceptable trade-off.
+ */
+#define LCD_T3_DELAY_MS	60
+
+#define LCD_T5_DELAY_MS	10
+#define LCD_T6_DELAY_MS	10
+
+static void backlight_pwm(void)
+{
+	/*Configure backlight PWM as a simple output high (100% brightness) */
+	gpio_direction_output(GPIO_B20, 1);
+	udelay(LCD_T6_DELAY_MS * 1000);
+}
+
+static void backlight_en(void)
+{
+	/* Configure GPIO for LCD_BL_EN */
+	gpio_direction_output(GPIO_X30, 1);
+}
+
+#define TPS69050_BUS	4	/* Pit-specific */
+
+#define FET1_CTRL	0x0f
+#define FET6_CTRL	0x14
+
+static void lcd_vdd(void)
+{
+	/* Enable FET6, lcd panel */
+	tps65090_fet_enable(TPS69050_BUS, FET6_CTRL);
+}
+
+static void backlight_vdd(void)
+{
+	/* Enable FET1, backlight */
+	tps65090_fet_enable(TPS69050_BUS, FET1_CTRL);
+	udelay(LCD_T5_DELAY_MS * 1000);
+}
+
+//static struct video_info smdk5420_dp_config = {
+static struct video_info dp_video_info = {
+	/* FIXME: fix video_info struct to use const for name */
+	.name			= (char *)"eDP-LVDS NXP PTN3460",
+
+	.h_sync_polarity	= 0,
+	.v_sync_polarity	= 0,
+	.interlaced		= 0,
+
+	.color_space		= COLOR_RGB,
+	.dynamic_range		= VESA,
+	.ycbcr_coeff		= COLOR_YCBCR601,
+	.color_depth		= COLOR_8,
+
+	.link_rate		= LINK_RATE_2_70GBPS,
+	.lane_count		= LANE_COUNT2,
+};
+
+/* FIXME: move some place more appropriate */
+#define EXYNOS5420_DP1_BASE	0x145b0000
+#define MAX_DP_TRIES	5
+
+/*
+ * This function disables the USB3.0 PLL to save power
+ */
+static void disable_usb30_pll(void)
+{
+	enum exynos5_gpio_pin usb3_pll_l = GPIO_Y11;
+
+	gpio_direction_output(usb3_pll_l, 0);
+}
+
+/* this happens after cpu_init where exynos resources are set */
+static void mainboard_init(device_t dev)
+{
+	int dp_tries;
+	struct s5p_dp_device dp_device = {
+		.base = (struct exynos5_dp *)EXYNOS5420_DP1_BASE,
+		.video_info = &dp_video_info,
+	};
+	void *fb_addr;
+
+	i2c_init(TPS69050_BUS, I2C_0_SPEED, I2C_SLAVE);
+	i2c_init(7, I2C_0_SPEED, I2C_SLAVE);
+
+	tmu_init(&exynos5420_tmu_info);
+
+	/* Clock Gating all the unused IP's to save power */
+	clock_gate();
+
+	/* Disable USB3.0 PLL to save 250mW of power */
+	disable_usb30_pll();
+
+	fb_addr = cbmem_find(CBMEM_ID_CONSOLE);
+	set_vbe_mode_info_valid(&edid, (uintptr_t)(fb_addr) + 64*KiB);
+
+	lcd_vdd();
+	do {
+		udelay(50);
+	} while (!exynos_dp_hotplug());
+
+	exynos_dp_bridge_setup();
+	for (dp_tries = 1; dp_tries <= MAX_DP_TRIES; dp_tries++) {
+		exynos_dp_bridge_init();
+		if (exynos_dp_hotplug()) {
+			exynos_dp_reset();
+			continue;
+		}
+
+		if (dp_controller_init(&dp_device))
+			continue;
+
+		udelay(LCD_T3_DELAY_MS * 1000);
+
+		backlight_vdd();
+		backlight_pwm();
+		backlight_en();
+		/* if we're here, we're successful */
+		break;
+	}
+
+	if (dp_tries > MAX_DP_TRIES)
+		printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__);
+
+	gpio_info();
+}
+
+static void mainboard_enable(device_t dev)
+{
+	dev->ops->init = &mainboard_init;
+
+	/* set up coreboot tables */
+	/* FIXME: this should happen somewhere else */
+	high_tables_size = CONFIG_COREBOOT_TABLES_SIZE;
+	high_tables_base = CONFIG_SYS_SDRAM_BASE +
+				((unsigned)CONFIG_DRAM_SIZE_MB << 20ULL) -
+				CONFIG_COREBOOT_TABLES_SIZE;
+	cbmem_init(high_tables_base, high_tables_size);
+
+	/* set up dcache and MMU */
+	/* FIXME: this should happen via resource allocator */
+	exynos5420_config_l2_cache();
+	mmu_init();
+	mmu_config_range(0, DRAM_START, DCACHE_OFF);
+	mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK);
+	mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF);
+	dcache_invalidate_all();
+	dcache_mmu_enable();
+
+	/* this is going to move, but we must have it now and we're
+	 * not sure where */
+	exception_init();
+
+	const unsigned epll_hz = 192000000;
+	const unsigned sample_rate = 48000;
+	const unsigned lr_frame_size = 256;
+	clock_epll_set_rate(epll_hz);
+	clock_select_i2s_clk_source();
+	clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size);
+
+	power_enable_xclkout();
+}
+
+struct chip_operations mainboard_ops = {
+	.name	= "Samsung/Google ARM Chromebook",
+	.enable_dev = mainboard_enable,
+};