diff options
| author | Furquan Shaikh <furquan@chromium.org> | 2017-05-23 11:56:09 -0700 |
|---|---|---|
| committer | Furquan Shaikh <furquan@google.com> | 2017-05-26 04:41:53 +0200 |
| commit | 73108ded48f6a58deb08e01c1ae8fd35baf39d95 (patch) | |
| tree | d062aacc48784eee5e1a8881367fcbe6ead70a39 /src/mainboard/google/poppy | |
| parent | 04edaefad7ed4f9dce9281a25480c1c6eb9e303d (diff) | |
| download | coreboot-73108ded48f6a58deb08e01c1ae8fd35baf39d95.tar.xz | |
mainboard/google/poppy: Add PowerResource for touchscreen device
1. Do not enable touchscreen device by default in gpio configuration.
2. Select use of PowerResource for touchscreen device in devicetree so
that the ACPI subsystem can take care of powering on/off the
device. When system enters suspend, touchscreen device is powered off
and on resume, it is powered back on.
BUG=b:62028489
TEST=Verified 100 cycles of suspend-resume. Touchscreen still works on
poppy.
Change-Id: Ia0bebc7259b10cc60a9fa5b53542dfdd9685663e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19829
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google/poppy')
3 files changed, 9 insertions, 1 deletions
diff --git a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb index 4e3ffaf68c..51dadda26a 100644 --- a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb @@ -210,6 +210,10 @@ chip soc/intel/skylake register "desc" = ""Atmel Touchscreen"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "probed" = "1" + register "has_power_resource" = "1" + register "disable_gpio_export_in_crs" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)" + register "enable_delay_ms" = "250" device i2c 4b on end end end # I2C #0 diff --git a/src/mainboard/google/poppy/variants/baseboard/gpio.c b/src/mainboard/google/poppy/variants/baseboard/gpio.c index 2be9d0f86f..a8651930c1 100644 --- a/src/mainboard/google/poppy/variants/baseboard/gpio.c +++ b/src/mainboard/google/poppy/variants/baseboard/gpio.c @@ -174,7 +174,7 @@ static const struct pad_config gpio_table[] = { /* C21 : UART2_TXD ==> PCHTX_SERVORX_UART */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* C22 : UART2_RTS# ==> EN_PP3300_DX_TOUCHSCREEN */ - PAD_CFG_GPO(GPP_C22, 1, DEEP), + PAD_CFG_GPO(GPP_C22, 0, DEEP), /* C23 : UART2_CTS# ==> PCH_WP */ PAD_CFG_GPI(GPP_C23, 20K_PU, DEEP), diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb index d7fe0e84ef..7efe413472 100644 --- a/src/mainboard/google/poppy/variants/soraka/devicetree.cb +++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb @@ -210,6 +210,10 @@ chip soc/intel/skylake register "desc" = ""Atmel Touchscreen"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "probed" = "1" + register "has_power_resource" = "1" + register "disable_gpio_export_in_crs" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)" + register "enable_delay_ms" = "250" device i2c 4b on end end end # I2C #0 |