diff options
author | Nick Vaccaro <nvaccaro@google.com> | 2020-06-18 18:30:31 -0700 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2020-06-22 12:25:04 +0000 |
commit | f3d399eb8bf6a987910f218babceb7d584b757e9 (patch) | |
tree | 57ee9728f4c84858e3894ba767a49cbf52f4b0e4 /src/mainboard/google/volteer/variants/terrador | |
parent | 2cc060061e7da96eff9ec5b566a03d33398b3964 (diff) | |
download | coreboot-f3d399eb8bf6a987910f218babceb7d584b757e9.tar.xz |
mb/google/volteer: move volteer devices to overridetree.cb
Move the following volteer-specific devices from baseboard's
devicetree.cb into volteer's overridetree.cb file:
- Goodix Touchscreen
- ELAN Touchscreen
- ELAN Touchpad
- SAR0 Proximity Sensor
Adjust the other variant's overridetree.cb files to correspond to
the changes made to the baseboard's devicetree.cb in this change.
BUG=b:159241303, b:154646959
TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot
volteer to kernel and verify that the trackpad works.
Change-Id: I30f8266ec87a7cde293c84d3e687d133207b8d59
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Diffstat (limited to 'src/mainboard/google/volteer/variants/terrador')
-rw-r--r-- | src/mainboard/google/volteer/variants/terrador/overridetree.cb | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/src/mainboard/google/volteer/variants/terrador/overridetree.cb b/src/mainboard/google/volteer/variants/terrador/overridetree.cb index 75422d80bb..4bff10d40d 100644 --- a/src/mainboard/google/volteer/variants/terrador/overridetree.cb +++ b/src/mainboard/google/volteer/variants/terrador/overridetree.cb @@ -1,4 +1,77 @@ chip soc/intel/tigerlake device domain 0 on + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "3" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "generic.enable_delay_ms" = "12" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 14 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""ELAN90FC"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "generic.reset_delay_ms" = "20" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + end # I2C1 0xA0E9 + device pci 15.2 on + chip drivers/i2c/sx9310 + register "desc" = ""SAR0 Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "0" + register "reg_prox_ctrl0" = "0x10" + register "reg_prox_ctrl1" = "0x00" + register "reg_prox_ctrl2" = "0x84" + register "reg_prox_ctrl3" = "0x0e" + register "reg_prox_ctrl4" = "0x07" + register "reg_prox_ctrl5" = "0xc6" + register "reg_prox_ctrl6" = "0x20" + register "reg_prox_ctrl7" = "0x0d" + register "reg_prox_ctrl8" = "0x8d" + register "reg_prox_ctrl9" = "0x43" + register "reg_prox_ctrl10" = "0x1f" + register "reg_prox_ctrl11" = "0x00" + register "reg_prox_ctrl12" = "0x00" + register "reg_prox_ctrl13" = "0x00" + register "reg_prox_ctrl14" = "0x00" + register "reg_prox_ctrl15" = "0x00" + register "reg_prox_ctrl16" = "0x00" + register "reg_prox_ctrl17" = "0x00" + register "reg_prox_ctrl18" = "0x00" + register "reg_prox_ctrl19" = "0x00" + register "reg_sar_ctrl0" = "0x50" + register "reg_sar_ctrl1" = "0x8a" + register "reg_sar_ctrl2" = "0x3c" + device i2c 28 on end + end + end # I2C2 0xA0EA + device pci 19.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "probed" = "1" + device i2c 15 on end + end + end # I2C5 0xA0C6 end end |