mb/google/volteer/var/voxel: Update gpio settings and overridetree.cb

Based on schematic and gpio table of voxel, generate gpio settings
and overridetree.cb for voxel.

BUG=b:157879197,b:155062762
TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage
Verify that the image-voxel.bin is generated successfully.

Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I49c1923e63d87f11de362fd893905ac2f1137bba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>

1 files changed, 128 insertions, 0 deletions

diff --git a/src/mainboard/google/volteer/variants/voxel/overridetree.cb b/src/mainboard/google/volteer/variants/voxel/overridetree.cb
index 75422d80bb..9ee7e6a346 100644
--- a/src/mainboard/google/volteer/variants/voxel/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/voxel/overridetree.cb
@@ -1,4 +1,132 @@
 chip soc/intel/tigerlake
 	device domain 0 on
+		device pci 15.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on
+				end
+			end
+			chip drivers/i2c/max98373
+				register "vmon_slot_no" = "0"
+				register "imon_slot_no" = "1"
+				register "uid" = "0"
+				register "desc" = ""Right Speaker Amp""
+				register "name" = ""MAXR""
+				device i2c 31 on
+				end
+			end
+			chip drivers/i2c/max98373
+				register "vmon_slot_no" = "2"
+				register "imon_slot_no" = "3"
+				register "uid" = "1"
+				register "desc" = ""Left Speaker Amp""
+				register "name" = ""MAXL""
+				device i2c 32 on
+				end
+			end
+		end # I2C #0			0xA0E8
+		device pci 15.1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 14 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN90FC""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+		end # I2C1				0xA0E9
+		device pci 15.2 on
+			chip drivers/i2c/sx9310
+				register "desc" = ""SAR0 Proximity Sensor""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+				register "speed" = "I2C_SPEED_FAST"
+				register "uid" = "0"
+				register "reg_prox_ctrl0" = "0x10"
+				register "reg_prox_ctrl1" = "0x00"
+				register "reg_prox_ctrl2" = "0x84"
+				register "reg_prox_ctrl3" = "0x0e"
+				register "reg_prox_ctrl4" = "0x07"
+				register "reg_prox_ctrl5" = "0xc6"
+				register "reg_prox_ctrl6" = "0x20"
+				register "reg_prox_ctrl7" = "0x0d"
+				register "reg_prox_ctrl8" = "0x8d"
+				register "reg_prox_ctrl9" = "0x43"
+				register "reg_prox_ctrl10" = "0x1f"
+				register "reg_prox_ctrl11" = "0x00"
+				register "reg_prox_ctrl12" = "0x00"
+				register "reg_prox_ctrl13" = "0x00"
+				register "reg_prox_ctrl14" = "0x00"
+				register "reg_prox_ctrl15" = "0x00"
+				register "reg_prox_ctrl16" = "0x00"
+				register "reg_prox_ctrl17" = "0x00"
+				register "reg_prox_ctrl18" = "0x00"
+				register "reg_prox_ctrl19" = "0x00"
+				register "reg_sar_ctrl0" = "0x50"
+				register "reg_sar_ctrl1" = "0x8a"
+				register "reg_sar_ctrl2" = "0x3c"
+				device i2c 28 on end
+			end
+		end # I2C2				0xA0EA
+		device pci 19.1 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # I2C5				0xA0C6
+		device pci 1f.2 hidden
+			# The pmc_mux chip driver is a placeholder for the
+			# PMC.MUX device in the ACPI hierarchy.
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/con
+						register "usb2_port_number" = "9"
+						register "usb3_port_number" = "1"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 0 on end
+					end
+					chip drivers/intel/pmc_mux/con
+						register "usb2_port_number" = "4"
+						register "usb3_port_number" = "2"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 1 on end
+					end
+				end
+			end
+		end # PMC
 	end
 end