summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer
diff options
context:
space:
mode:
authorNick Vaccaro <nvaccaro@google.com>2020-06-18 18:30:31 -0700
committerPatrick Georgi <pgeorgi@google.com>2020-06-22 12:25:04 +0000
commitf3d399eb8bf6a987910f218babceb7d584b757e9 (patch)
tree57ee9728f4c84858e3894ba767a49cbf52f4b0e4 /src/mainboard/google/volteer
parent2cc060061e7da96eff9ec5b566a03d33398b3964 (diff)
downloadcoreboot-f3d399eb8bf6a987910f218babceb7d584b757e9.tar.xz
mb/google/volteer: move volteer devices to overridetree.cb
Move the following volteer-specific devices from baseboard's devicetree.cb into volteer's overridetree.cb file: - Goodix Touchscreen - ELAN Touchscreen - ELAN Touchpad - SAR0 Proximity Sensor Adjust the other variant's overridetree.cb files to correspond to the changes made to the baseboard's devicetree.cb in this change. BUG=b:159241303, b:154646959 TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot volteer to kernel and verify that the trackpad works. Change-Id: I30f8266ec87a7cde293c84d3e687d133207b8d59 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Diffstat (limited to 'src/mainboard/google/volteer')
-rw-r--r--src/mainboard/google/volteer/variants/baseboard/devicetree.cb78
-rw-r--r--src/mainboard/google/volteer/variants/halvor/overridetree.cb73
-rw-r--r--src/mainboard/google/volteer/variants/malefor/overridetree.cb43
-rw-r--r--src/mainboard/google/volteer/variants/terrador/overridetree.cb73
-rw-r--r--src/mainboard/google/volteer/variants/trondo/overridetree.cb73
-rw-r--r--src/mainboard/google/volteer/variants/volteer/overridetree.cb73
6 files changed, 338 insertions, 75 deletions
diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
index 9d044b95ea..705da1d0f4 100644
--- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
@@ -309,70 +309,9 @@ chip soc/intel/tigerlake
register "wake" = "GPE0_PME_B0"
device pci 14.3 on end # CNVi: WiFi 0xA0F0 - A0F3
end
- device pci 15.0 on end # I2C #0 0xA0E8
- device pci 15.1 on
- chip drivers/i2c/hid
- register "generic.hid" = ""GDIX0000""
- register "generic.desc" = ""Goodix Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- register "generic.probed" = "1"
- register "generic.reset_gpio" =
- "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
- register "generic.reset_delay_ms" = "120"
- register "generic.reset_off_delay_ms" = "3"
- register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
- register "generic.enable_delay_ms" = "12"
- register "generic.has_power_resource" = "1"
- register "hid_desc_reg_offset" = "0x01"
- device i2c 14 on end
- end
- chip drivers/i2c/hid
- register "generic.hid" = ""ELAN90FC""
- register "generic.desc" = ""ELAN Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- register "generic.probed" = "1"
- register "generic.reset_gpio" =
- "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
- register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
- register "generic.reset_delay_ms" = "20"
- register "generic.has_power_resource" = "1"
- register "generic.disable_gpio_export_in_crs" = "1"
- register "hid_desc_reg_offset" = "0x01"
- device i2c 10 on end
- end
- end # I2C1 0xA0E9
- device pci 15.2 on
- chip drivers/i2c/sx9310
- register "desc" = ""SAR0 Proximity Sensor""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
- register "speed" = "I2C_SPEED_FAST"
- register "uid" = "0"
- register "reg_prox_ctrl0" = "0x10"
- register "reg_prox_ctrl1" = "0x00"
- register "reg_prox_ctrl2" = "0x84"
- register "reg_prox_ctrl3" = "0x0e"
- register "reg_prox_ctrl4" = "0x07"
- register "reg_prox_ctrl5" = "0xc6"
- register "reg_prox_ctrl6" = "0x20"
- register "reg_prox_ctrl7" = "0x0d"
- register "reg_prox_ctrl8" = "0x8d"
- register "reg_prox_ctrl9" = "0x43"
- register "reg_prox_ctrl10" = "0x1f"
- register "reg_prox_ctrl11" = "0x00"
- register "reg_prox_ctrl12" = "0x00"
- register "reg_prox_ctrl13" = "0x00"
- register "reg_prox_ctrl14" = "0x00"
- register "reg_prox_ctrl15" = "0x00"
- register "reg_prox_ctrl16" = "0x00"
- register "reg_prox_ctrl17" = "0x00"
- register "reg_prox_ctrl18" = "0x00"
- register "reg_prox_ctrl19" = "0x00"
- register "reg_sar_ctrl0" = "0x50"
- register "reg_sar_ctrl1" = "0x8a"
- register "reg_sar_ctrl2" = "0x3c"
- device i2c 28 on end
- end
- end # I2C2 0xA0EA
+ device pci 15.0 on end # I2C #0 0xA0E8
+ device pci 15.1 on end # I2C1 0xA0E9
+ device pci 15.2 on end # I2C2 0xA0EA
device pci 15.3 on end # I2C3 0xA0EB
device pci 16.0 on end # HECI1 0xA0E0
@@ -385,16 +324,7 @@ chip soc/intel/tigerlake
device pci 17.0 on end # SATA 0xA0D3
device pci 19.0 on end # I2C4 0xA0C5
- device pci 19.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
- register "wake" = "GPE0_DW2_15"
- register "probed" = "1"
- device i2c 15 on end
- end
- end # I2C5 0xA0C6
+ device pci 19.1 on end # I2C5 0xA0C6
device pci 19.2 off end # UART2 0xA0C7
device pci 1c.0 on end # RP1 0xA0B8
diff --git a/src/mainboard/google/volteer/variants/halvor/overridetree.cb b/src/mainboard/google/volteer/variants/halvor/overridetree.cb
index 20a90cc6ba..e53132a008 100644
--- a/src/mainboard/google/volteer/variants/halvor/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/halvor/overridetree.cb
@@ -46,6 +46,79 @@ chip soc/intel/tigerlake
device i2c 32 on end
end
end # I2C #0 0xA0E8
+ device pci 15.1 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GDIX0000""
+ register "generic.desc" = ""Goodix Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.reset_delay_ms" = "120"
+ register "generic.reset_off_delay_ms" = "3"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.enable_delay_ms" = "12"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 14 on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN90FC""
+ register "generic.desc" = ""ELAN Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.reset_delay_ms" = "20"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 10 on end
+ end
+ end # I2C1 0xA0E9
+ device pci 15.2 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR0 Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "0"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C2 0xA0EA
+ device pci 19.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+ register "wake" = "GPE0_DW2_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C5 0xA0C6
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
diff --git a/src/mainboard/google/volteer/variants/malefor/overridetree.cb b/src/mainboard/google/volteer/variants/malefor/overridetree.cb
index 8d4c6ea029..84493f8074 100644
--- a/src/mainboard/google/volteer/variants/malefor/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/malefor/overridetree.cb
@@ -19,6 +19,47 @@ chip soc/intel/tigerlake
device i2c 5d on end
end
end # I2C1
+ device pci 15.2 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR0 Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "0"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C2 0xA0EA
+ device pci 19.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+ register "wake" = "GPE0_DW2_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C5 0xA0C6
end
-
end
diff --git a/src/mainboard/google/volteer/variants/terrador/overridetree.cb b/src/mainboard/google/volteer/variants/terrador/overridetree.cb
index 75422d80bb..4bff10d40d 100644
--- a/src/mainboard/google/volteer/variants/terrador/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/terrador/overridetree.cb
@@ -1,4 +1,77 @@
chip soc/intel/tigerlake
device domain 0 on
+ device pci 15.1 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GDIX0000""
+ register "generic.desc" = ""Goodix Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.reset_delay_ms" = "120"
+ register "generic.reset_off_delay_ms" = "3"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.enable_delay_ms" = "12"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 14 on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN90FC""
+ register "generic.desc" = ""ELAN Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.reset_delay_ms" = "20"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 10 on end
+ end
+ end # I2C1 0xA0E9
+ device pci 15.2 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR0 Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "0"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C2 0xA0EA
+ device pci 19.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+ register "wake" = "GPE0_DW2_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C5 0xA0C6
end
end
diff --git a/src/mainboard/google/volteer/variants/trondo/overridetree.cb b/src/mainboard/google/volteer/variants/trondo/overridetree.cb
index 75422d80bb..4bff10d40d 100644
--- a/src/mainboard/google/volteer/variants/trondo/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/trondo/overridetree.cb
@@ -1,4 +1,77 @@
chip soc/intel/tigerlake
device domain 0 on
+ device pci 15.1 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GDIX0000""
+ register "generic.desc" = ""Goodix Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.reset_delay_ms" = "120"
+ register "generic.reset_off_delay_ms" = "3"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.enable_delay_ms" = "12"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 14 on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN90FC""
+ register "generic.desc" = ""ELAN Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.reset_delay_ms" = "20"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 10 on end
+ end
+ end # I2C1 0xA0E9
+ device pci 15.2 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR0 Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "0"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C2 0xA0EA
+ device pci 19.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+ register "wake" = "GPE0_DW2_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C5 0xA0C6
end
end
diff --git a/src/mainboard/google/volteer/variants/volteer/overridetree.cb b/src/mainboard/google/volteer/variants/volteer/overridetree.cb
index 9e5ef4b81f..24b869ced9 100644
--- a/src/mainboard/google/volteer/variants/volteer/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/volteer/overridetree.cb
@@ -37,6 +37,79 @@ chip soc/intel/tigerlake
end
end
end
+ device pci 15.1 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GDIX0000""
+ register "generic.desc" = ""Goodix Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.reset_delay_ms" = "120"
+ register "generic.reset_off_delay_ms" = "3"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.enable_delay_ms" = "12"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 14 on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN90FC""
+ register "generic.desc" = ""ELAN Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "generic.reset_delay_ms" = "20"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 10 on end
+ end
+ end # I2C1 0xA0E9
+ device pci 15.2 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR0 Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "0"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C2 0xA0EA
+ device pci 19.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+ register "wake" = "GPE0_DW2_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C5 0xA0C6
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""