summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
authorFurquan Shaikh <furquan@google.com>2018-06-07 15:27:14 -0700
committerAaron Durbin <adurbin@chromium.org>2018-06-07 23:46:01 +0000
commit1313244ae7537718bfa4fdf1b1155ac9d0ade27c (patch)
tree9b9095c3a9cbc9f98337008f9fea116b3016e042 /src/mainboard/google
parent9cd99a1524cd8c7cd6100cfc9d68e85eea5ac265 (diff)
downloadcoreboot-1313244ae7537718bfa4fdf1b1155ac9d0ade27c.tar.xz
mb/google/octopus: Fix GPIO to GPE mappings in devicetree
Change b41ae2 (mb/google/octopus: Enable wake-over-wifi for octopus variants) changed the GPE mappings to accomodate for WiFi wake pin. However, this resulted in TPM interrupt pin being removed from the GPIO to GPE mapping. Since we do not support true interrupts in coreboot, GPE_STS registers are used to identify if an interrupt has triggered. Change in GPE mapping resulted in this information to be lost when talking to TPM thus resulting in "Timeout wait for tpm irq". This change fixes the above issue by assigning GPIO block for TPM interrupt back to DW1 and moving GPIO block for wake-over-wifi pin to DW3. DW3 was mapped to NW_31_0 which only has debug header pins and CNVI pins (none of them are used for reading GPE_STS or as wake sources). BUG=b:109824918 TEST=Verified that there are no "Timeout wait for tpm irq" messages when talking to TPM. Change-Id: I30768177a838a684948f7485d760c8b83c3190f7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/octopus/variants/baseboard/devicetree.cb15
-rw-r--r--src/mainboard/google/octopus/variants/bip/devicetree.cb14
2 files changed, 23 insertions, 6 deletions
diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
index 9bd51ca35c..d6f0829b47 100644
--- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
@@ -29,9 +29,18 @@ chip soc/intel/apollolake
# route, i.e., if this route changes then the affected GPE
# offset bits also need to be changed. This sets the PMC register
# GPE_CFG fields.
- register "gpe0_dw1" = "PMC_GPE_N_63_32"
+ # DW1 is used by:
+ # - GPIO_63 - H1_PCH_INT_ODL
+ # DW2 is used by:
+ # - GPIO_141 - EC_PCH_WAKE_ODL
+ # - GPIO_142 - TRACKPAD_INT2_1V8_ODL
+ # - GPIO_144 - PEN_EJECT_ODL
+ # DW3 is used by:
+ # - GPIO_117 - LTE_WAKE_ODL
+ # - GPIO_119 - WLAN_PCIE_WAKE_ODL
+ register "gpe0_dw1" = "PMC_GPE_NW_63_32"
register "gpe0_dw2" = "PMC_GPE_N_95_64"
- register "gpe0_dw3" = "PMC_GPE_NW_31_0"
+ register "gpe0_dw3" = "PMC_GPE_N_63_32"
# PL1 override 8000 mW: Due to error in the energy calculation for
# current VR solution. Experiments show that SoC TDP max (6W) can
@@ -122,7 +131,7 @@ chip soc/intel/apollolake
device pci 12.0 off end # - SATA
device pci 13.0 on
chip drivers/intel/wifi
- register "wake" = "GPE0_DW1_11"
+ register "wake" = "GPE0_DW3_11"
device pci 00.0 on end
end
end # - PCIe-A 0 Onboard M2 Slot(Wifi)
diff --git a/src/mainboard/google/octopus/variants/bip/devicetree.cb b/src/mainboard/google/octopus/variants/bip/devicetree.cb
index 339b5bfcb1..8f2992b023 100644
--- a/src/mainboard/google/octopus/variants/bip/devicetree.cb
+++ b/src/mainboard/google/octopus/variants/bip/devicetree.cb
@@ -29,9 +29,17 @@ chip soc/intel/apollolake
# route, i.e., if this route changes then the affected GPE
# offset bits also need to be changed. This sets the PMC register
# GPE_CFG fields.
- register "gpe0_dw1" = "PMC_GPE_N_63_32"
+ # DW1 is used by:
+ # - GPIO_63 - H1_PCH_INT_ODL
+ # DW2 is used by:
+ # - GPIO_141 - EC_PCH_WAKE_ODL
+ # - GPIO_142 - TRACKPAD_INT2_1V8_ODL
+ # DW3 is used by:
+ # - GPIO_117 - LTE_WAKE_ODL
+ # - GPIO_119 - WLAN_PCIE_WAKE_ODL
+ register "gpe0_dw1" = "PMC_GPE_NW_63_32"
register "gpe0_dw2" = "PMC_GPE_N_95_64"
- register "gpe0_dw3" = "PMC_GPE_NW_31_0"
+ register "gpe0_dw3" = "PMC_GPE_N_63_32"
# PL1 override 8000 mW: Due to error in the energy calculation for
# current VR solution. Experiments show that SoC TDP max (6W) can
@@ -122,7 +130,7 @@ chip soc/intel/apollolake
device pci 12.0 off end # - SATA
device pci 13.0 on
chip drivers/intel/wifi
- register "wake" = "GPE0_DW1_11"
+ register "wake" = "GPE0_DW3_11"
device pci 00.0 on end
end
end # - PCIe-A 0 Onboard M2 Slot(Wifi)