diff options
author | Nick Vaccaro <nvaccaro@chromium.org> | 2017-12-02 10:26:31 -0800 |
---|---|---|
committer | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2018-01-11 01:07:35 +0000 |
commit | 8508f7d18286ca9207151951e28578d461cc799d (patch) | |
tree | ecf85b901e6478f3a8dc4f0d1042055128610b5b /src/mainboard/google | |
parent | ffe6dd1f43d6fb2eefd79b2346c4eec6e477d74c (diff) | |
download | coreboot-8508f7d18286ca9207151951e28578d461cc799d.tar.xz |
mainboard/google/zoombini: enable USB and assign acpi irq
-add USB2 and USB3 to devicetree
-add TPM_TIS_ACPI_INTERRUPT to Kconfig
-map gpe0_dw0, gpe0_dw1, and gpe0_dw2 blocks
BUG=b:64395641
BRANCH=chromeos-2016.05
TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a"
compiles successfully.
Change-Id: Ia7ed76591d9d8d94bbf5652313c478495ce005fa
Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Reviewed-on: https://review.coreboot.org/23191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/mainboard/google')
-rw-r--r-- | src/mainboard/google/zoombini/Kconfig | 4 | ||||
-rw-r--r-- | src/mainboard/google/zoombini/variants/baseboard/devicetree.cb | 41 |
2 files changed, 45 insertions, 0 deletions
diff --git a/src/mainboard/google/zoombini/Kconfig b/src/mainboard/google/zoombini/Kconfig index 2fe8fec04f..8e1cfbbcbe 100644 --- a/src/mainboard/google/zoombini/Kconfig +++ b/src/mainboard/google/zoombini/Kconfig @@ -86,4 +86,8 @@ config ZOOMBINI_USE_SPI_TPM select SPI_TPM select TPM2 +config TPM_TIS_ACPI_INTERRUPT + int + default 76 # GPE0_DW2_12 (GPP_C12) + endif # BOARD_GOOGLE_BASEBOARD_ZOOMBINI diff --git a/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb b/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb index 771bab2af1..1bf5dba562 100644 --- a/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb @@ -1,9 +1,50 @@ chip soc/intel/cannonlake + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "PMC_GPP_A" + register "gpe0_dw1" = "PMC_GPP_B" + register "gpe0_dw2" = "PMC_GPP_C" + device cpu_cluster 0 on device lapic 0 on end end + # FSP configuration + register "SaGv" = "3" + register "FspSkipMpInit" = "1" + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "1" + + # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM + # communication before memory is up. + register "gspi[0]" = "{ + .speed_mhz = 1, + .early_init = 1, + }" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" + register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC2)" + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" + register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC_SKIP)" + register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC_SKIP)" + register "usb2_ports[6]" = "USB2_PORT_TYPE_C(OC_SKIP)" + register "usb2_ports[7]" = "USB2_PORT_TYPE_C(OC_SKIP)" + register "usb2_ports[8]" = "USB2_PORT_TYPE_C(OC_SKIP)" + register "usb2_ports[9]" = "USB2_PORT_TYPE_C(OC_SKIP)" + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC0)" + device domain 0 on device pci 00.0 on end # Host Bridge device pci 02.0 on end # Integrated Graphics Device |