summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
authorGabe Black <gabeblack@google.com>2013-07-30 21:35:31 -0700
committerPatrick Georgi <patrick@georgi-clan.de>2013-12-21 19:56:56 +0100
commit9245440eaf6d77175a76b68162917997a3152d24 (patch)
treeef7a44c44690a5006dcf64f9736898a1be223055 /src/mainboard/google
parent74dbfc252ff07a9c9b7fcf4511e561991d5bd46d (diff)
downloadcoreboot-9245440eaf6d77175a76b68162917997a3152d24.tar.xz
Add a kirby board which is mostly a copy of pit
Change-Id: Ic78c65486816015f7574a13affc6e54acbbea73e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63875 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4411 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/Kconfig3
-rw-r--r--src/mainboard/google/kirby/Kconfig52
-rw-r--r--src/mainboard/google/kirby/Makefile.inc27
-rw-r--r--src/mainboard/google/kirby/chromeos.c105
-rw-r--r--src/mainboard/google/kirby/devicetree.cb35
-rw-r--r--src/mainboard/google/kirby/exynos5420.h34
-rw-r--r--src/mainboard/google/kirby/mainboard.c384
-rw-r--r--src/mainboard/google/kirby/memory.c110
-rw-r--r--src/mainboard/google/kirby/romstage.c280
-rw-r--r--src/mainboard/google/kirby/wakeup.c29
10 files changed, 1059 insertions, 0 deletions
diff --git a/src/mainboard/google/Kconfig b/src/mainboard/google/Kconfig
index c866c1fec1..8f5fbaa109 100644
--- a/src/mainboard/google/Kconfig
+++ b/src/mainboard/google/Kconfig
@@ -32,6 +32,8 @@ config BOARD_GOOGLE_BUTTERFLY
bool "Butterfly"
config BOARD_GOOGLE_FALCO
bool "Falco"
+config BOARD_GOOGLE_KIRBY
+ bool "Kirby"
config BOARD_GOOGLE_LINK
bool "Link"
config BOARD_GOOGLE_PARROT
@@ -52,6 +54,7 @@ endchoice
source "src/mainboard/google/bolt/Kconfig"
source "src/mainboard/google/butterfly/Kconfig"
source "src/mainboard/google/falco/Kconfig"
+source "src/mainboard/google/kirby/Kconfig"
source "src/mainboard/google/link/Kconfig"
source "src/mainboard/google/parrot/Kconfig"
source "src/mainboard/google/peppy/Kconfig"
diff --git a/src/mainboard/google/kirby/Kconfig b/src/mainboard/google/kirby/Kconfig
new file mode 100644
index 0000000000..0fa2a611c0
--- /dev/null
+++ b/src/mainboard/google/kirby/Kconfig
@@ -0,0 +1,52 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2013 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+if BOARD_GOOGLE_KIRBY
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ARCH_ARMV7
+ select CPU_SAMSUNG_EXYNOS5420
+ select HAVE_UART_MEMORY_MAPPED
+ select EC_GOOGLE_CHROMEEC
+ select EC_GOOGLE_CHROMEEC_SPI
+ select BOARD_ROMSIZE_KB_4096
+ select MAINBOARD_HAS_CHROMEOS
+ select MAINBOARD_HAS_NATIVE_VGA_INIT
+ select MAINBOARD_DO_NATIVE_VGA_INIT
+ select HAVE_INIT_TIMER
+ select DRIVER_PARADE_PS8625
+
+config MAINBOARD_DIR
+ string
+ default google/kirby
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "Kirby"
+
+config DRAM_SIZE_MB
+ int
+ default 4096
+
+config EC_GOOGLE_CHROMEEC_SPI_BUS
+ hex
+ default 2
+
+endif # BOARD_GOOGLE_PIT
diff --git a/src/mainboard/google/kirby/Makefile.inc b/src/mainboard/google/kirby/Makefile.inc
new file mode 100644
index 0000000000..1409e54da2
--- /dev/null
+++ b/src/mainboard/google/kirby/Makefile.inc
@@ -0,0 +1,27 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2013 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+bootblock-y += wakeup.c
+
+romstage-y += memory.c
+romstage-y += romstage.c
+romstage-y += wakeup.c
+
+ramstage-y += mainboard.c
+ramstage-y += chromeos.c
diff --git a/src/mainboard/google/kirby/chromeos.c b/src/mainboard/google/kirby/chromeos.c
new file mode 100644
index 0000000000..ae219bb421
--- /dev/null
+++ b/src/mainboard/google/kirby/chromeos.c
@@ -0,0 +1,105 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <boot/coreboot_tables.h>
+#include <console/console.h>
+#include <ec/google/chromeec/ec.h>
+#include <ec/google/chromeec/ec_commands.h>
+#include <string.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <cpu/samsung/exynos5420/cpu.h>
+#include <cpu/samsung/exynos5420/gpio.h>
+
+enum {
+ ACTIVE_LOW = 0,
+ ACTIVE_HIGH = 1
+};
+
+void fill_lb_gpios(struct lb_gpios *gpios)
+{
+ int count = 0;
+
+ /* Write Protect: active low */
+ gpios->gpios[count].port = EXYNOS5_GPX3;
+ gpios->gpios[count].polarity = ACTIVE_LOW;
+ gpios->gpios[count].value = gpio_get_value(GPIO_X30); // WP_GPIO
+ strncpy((char *)gpios->gpios[count].name, "write protect",
+ GPIO_MAX_NAME_LENGTH);
+ count++;
+
+ /* Recovery: active low */
+ gpios->gpios[count].port = -1;
+ gpios->gpios[count].polarity = ACTIVE_HIGH;
+ gpios->gpios[count].value = get_recovery_mode_switch();
+ strncpy((char *)gpios->gpios[count].name, "recovery",
+ GPIO_MAX_NAME_LENGTH);
+ count++;
+
+ /* Lid: active high */
+ gpios->gpios[count].port = EXYNOS5_GPX3;
+ gpios->gpios[count].polarity = ACTIVE_HIGH;
+ gpios->gpios[count].value = gpio_get_value(GPIO_X34); // LID_GPIO
+ strncpy((char *)gpios->gpios[count].name, "lid", GPIO_MAX_NAME_LENGTH);
+ count++;
+
+ /* Power: virtual GPIO active low */
+ gpios->gpios[count].port = EXYNOS5_GPX1;
+ gpios->gpios[count].polarity = ACTIVE_LOW;
+ gpios->gpios[count].value =
+ gpio_get_value(GPIO_X12); // POWER_GPIO
+ strncpy((char *)gpios->gpios[count].name, "power",
+ GPIO_MAX_NAME_LENGTH);
+ count++;
+
+ /* Developer: virtual GPIO active high */
+ gpios->gpios[count].port = -1;
+ gpios->gpios[count].polarity = ACTIVE_HIGH;
+ gpios->gpios[count].value = get_developer_mode_switch();
+ strncpy((char *)gpios->gpios[count].name, "developer",
+ GPIO_MAX_NAME_LENGTH);
+ count++;
+
+ gpios->size = sizeof(*gpios) + (count * sizeof(struct lb_gpio));
+ gpios->count = count;
+
+ printk(BIOS_ERR, "Added %d GPIOS size %d\n", count, gpios->size);
+}
+
+int get_developer_mode_switch(void)
+{
+ return 0;
+}
+
+int get_recovery_mode_switch(void)
+{
+ uint32_t ec_events;
+
+ /* The GPIO is active low. */
+ if (!gpio_get_value(GPIO_X07)) // RECMODE_GPIO
+ return 1;
+
+ ec_events = google_chromeec_get_events_b();
+ return !!(ec_events &
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY));
+}
+
+int get_recovery_mode_from_vbnv(void)
+{
+ return 0;
+}
diff --git a/src/mainboard/google/kirby/devicetree.cb b/src/mainboard/google/kirby/devicetree.cb
new file mode 100644
index 0000000000..2c9e668fe5
--- /dev/null
+++ b/src/mainboard/google/kirby/devicetree.cb
@@ -0,0 +1,35 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2013 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+chip cpu/samsung/exynos5420
+ device cpu_cluster 0 on end
+ register "xres" = "1366"
+ register "yres" = "768"
+ register "bpp" = "16"
+ # complex magic timing!
+ register "clkval_f" = "2"
+ register "upper_margin" = "14"
+ register "lower_margin" = "3"
+ register "vsync" = "5"
+ register "left_margin" = "80"
+ register "right_margin" = "48"
+ register "hsync" = "32"
+ register "usb_vbus_gpio" = "GPIO_X11"
+ register "usb_hsic_gpio" = "GPIO_E10"
+end
diff --git a/src/mainboard/google/kirby/exynos5420.h b/src/mainboard/google/kirby/exynos5420.h
new file mode 100644
index 0000000000..21b704ceaa
--- /dev/null
+++ b/src/mainboard/google/kirby/exynos5420.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* I2C */
+#define I2C_0_SPEED 100000
+#define I2C_4_SPEED 1000000 /* 1MHz */
+#define I2C_SLAVE 0
+
+/* Voltages */
+#define VDD_ARM_MV 1300 // 1.3V
+#define VDD_INT_UV 1012500 // 1.0125V
+#define VDD_MIF_MV 1000 // 1.0V
+#define VDD_G3D_MV 1200 // 1.2V
+#define VDD_LDO2_MV 1500 // 1.5V
+#define VDD_LDO3_MV 1800 // 1.8V
+#define VDD_LDO5_MV 1800 // 1.8V
+#define VDD_LDO10_MV 1800 // 1.8V
+
diff --git a/src/mainboard/google/kirby/mainboard.c b/src/mainboard/google/kirby/mainboard.c
new file mode 100644
index 0000000000..98e591a1d0
--- /dev/null
+++ b/src/mainboard/google/kirby/mainboard.c
@@ -0,0 +1,384 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/i2c.h>
+#include <cbmem.h>
+#include <delay.h>
+#include <edid.h>
+#include <vbe.h>
+#include <boot/coreboot_tables.h>
+#include <arch/cache.h>
+#include <arch/exception.h>
+#include <cpu/samsung/exynos5420/tmu.h>
+#include <cpu/samsung/exynos5420/clk.h>
+#include <cpu/samsung/exynos5420/cpu.h>
+#include <cpu/samsung/exynos5420/gpio.h>
+#include <cpu/samsung/exynos5420/power.h>
+#include <cpu/samsung/exynos5420/i2c.h>
+#include <cpu/samsung/exynos5420/dp-core.h>
+#include <drivers/parade/ps8625/ps8625.h>
+#include <ec/google/chromeec/ec.h>
+#include <stdlib.h>
+
+#include "exynos5420.h"
+
+/* convenient shorthand (in MB) */
+#define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20)
+#define DRAM_SIZE CONFIG_DRAM_SIZE_MB
+#define DRAM_END (DRAM_START + DRAM_SIZE) /* plus one... */
+
+static struct edid edid = {
+ .ha = 1366,
+ .va = 768,
+ .bpp = 16,
+ .x_resolution = 1366,
+ .y_resolution = 768,
+ .bytes_per_line = 2 * 1366
+};
+
+static const struct parade_write parade_writes[] = {
+ { 0x02, 0xa1, 0x01 }, /* HPD low */
+ /*
+ * SW setting
+ * [1:0] SW output 1.2V voltage is lower to 96%
+ */
+ { 0x04, 0x14, 0x01 },
+ /*
+ * RCO SS setting
+ * [5:4] = b01 0.5%, b10 1%, b11 1.5%
+ */
+ { 0x04, 0xe3, 0x20 },
+ { 0x04, 0xe2, 0x80 }, /* [7] RCO SS enable */
+ /*
+ * RPHY Setting
+ * [3:2] CDR tune wait cycle before
+ * measure for fine tune b00: 1us,
+ * 01: 0.5us, 10:2us, 11:4us.
+ */
+ { 0x04, 0x8a, 0x0c },
+ { 0x04, 0x89, 0x08 }, /* [3] RFD always on */
+ /*
+ * CTN lock in/out:
+ * 20000ppm/80000ppm. Lock out 2
+ * times.
+ */
+ { 0x04, 0x71, 0x2d },
+ /*
+ * 2.7G CDR settings
+ * NOF=40LSB for HBR CDR setting
+ */
+ { 0x04, 0x7d, 0x07 },
+ { 0x04, 0x7b, 0x00 }, /* [1:0] Fmin=+4bands */
+ { 0x04, 0x7a, 0xfd }, /* [7:5] DCO_FTRNG=+-40% */
+ /*
+ * 1.62G CDR settings
+ * [5:2]NOF=64LSB [1:0]DCO scale is 2/5
+ */
+ { 0x04, 0xc0, 0x12 },
+ { 0x04, 0xc1, 0x92 }, /* Gitune=-37% */
+ { 0x04, 0xc2, 0x1c }, /* Fbstep=100% */
+ { 0x04, 0x32, 0x80 }, /* [7] LOS signal disable */
+ /*
+ * RPIO Setting
+ * [7:4] LVDS driver bias current :
+ * 75% (250mV swing)
+ */
+ { 0x04, 0x00, 0xb0 },
+ /*
+ * [7:6] Right-bar GPIO output strength is 8mA
+ */
+ { 0x04, 0x15, 0x40 },
+ /* EQ Training State Machine Setting */
+ { 0x04, 0x54, 0x10 }, /* RCO calibration start */
+ /* [4:0] MAX_LANE_COUNT set to one lane */
+ { 0x01, 0x02, 0x81 },
+ /* [4:0] LANE_COUNT_SET set to one lane */
+ { 0x01, 0x21, 0x81 },
+ { 0x00, 0x52, 0x20 },
+ { 0x00, 0xf1, 0x03 }, /* HPD CP toggle enable */
+ { 0x00, 0x62, 0x41 },
+ /* Counter number, add 1ms counter delay */
+ { 0x00, 0xf6, 0x01 },
+ /*
+ * [6]PWM function control by
+ * DPCD0040f[7], default is PWM
+ * block always works.
+ */
+ { 0x00, 0x77, 0x06 },
+ /*
+ * 04h Adjust VTotal tolerance to
+ * fix the 30Hz no display issue
+ */
+ { 0x00, 0x4c, 0x04 },
+ /* DPCD00400='h00, Parade OUI = 'h001cf8 */
+ { 0x01, 0xc0, 0x00 },
+ { 0x01, 0xc1, 0x1c }, /* DPCD00401='h1c */
+ { 0x01, 0xc2, 0xf8 }, /* DPCD00402='hf8 */
+ /*
+ * DPCD403~408 = ASCII code
+ * D2SLV5='h4432534c5635
+ */
+ { 0x01, 0xc3, 0x44 },
+ { 0x01, 0xc4, 0x32 }, /* DPCD404 */
+ { 0x01, 0xc5, 0x53 }, /* DPCD405 */
+ { 0x01, 0xc6, 0x4c }, /* DPCD406 */
+ { 0x01, 0xc7, 0x56 }, /* DPCD407 */
+ { 0x01, 0xc8, 0x35 }, /* DPCD408 */
+ /*
+ * DPCD40A, Initial Code major revision
+ * '01'
+ */
+ { 0x01, 0xca, 0x01 },
+ /* DPCD40B, Initial Code minor revision '05' */
+ { 0x01, 0xcb, 0x05 },
+ /* DPCD720, Select external PWM */
+ { 0x01, 0xa5, 0x80 },
+ /*
+ * Set LVDS output as 6bit-VESA mapping,
+ * single LVDS channel
+ */
+ { 0x01, 0xcc, 0x13 },
+ /* Enable SSC set by register */
+ { 0x02, 0xb1, 0x20 },
+ /*
+ * Set SSC enabled and +/-1% central
+ * spreading
+ */
+ { 0x04, 0x10, 0x16 },
+ /* MPU Clock source: LC => RCO */
+ { 0x04, 0x59, 0x60 },
+ { 0x04, 0x54, 0x14 }, /* LC -> RCO */
+ { 0x02, 0xa1, 0x91 } /* HPD high */
+};
+
+/* TODO: transplanted DP stuff, clean up once we have something that works */
+static enum exynos5_gpio_pin dp_pd_l = GPIO_X35; /* active low */
+static enum exynos5_gpio_pin dp_rst_l = GPIO_Y77; /* active low */
+static enum exynos5_gpio_pin dp_hpd = GPIO_X26; /* active high */
+static enum exynos5_gpio_pin bl_pwm = GPIO_B20; /* active high */
+static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */
+
+static void parade_dp_bridge_setup(void)
+{
+ gpio_set_value(dp_pd_l, 1);
+ gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT);
+ gpio_set_pull(dp_pd_l, GPIO_PULL_NONE);
+
+ gpio_set_value(dp_rst_l, 0);
+ gpio_cfg_pin(dp_rst_l, GPIO_OUTPUT);
+ gpio_set_pull(dp_rst_l, GPIO_PULL_NONE);
+ udelay(10);
+ gpio_set_value(dp_rst_l, 1);
+
+ gpio_cfg_pin(dp_hpd, GPIO_INPUT);
+
+ /* De-assert PD (and possibly RST) to power up the bridge. */
+ gpio_set_value(dp_pd_l, 1);
+ gpio_set_value(dp_rst_l, 1);
+
+ /* Hang around for the bridge to come up. */
+ mdelay(40);
+
+ /* Configure the bridge chip. */
+ exynos_pinmux_i2c7();
+ i2c_init(7, 100000, 0x00);
+
+ parade_ps8625_bridge_setup(7, 0x48,
+ parade_writes,
+ ARRAY_SIZE(parade_writes));
+}
+
+/*
+ * This delay is T3 in the LCD timing spec (defined as >200ms). We set
+ * this down to 60ms since that's the approximate maximum amount of time
+ * it'll take a bridge to start outputting LVDS data. The delay of
+ * >200ms is just a conservative value to avoid turning on the backlight
+ * when there's random LCD data on the screen. Shaving 140ms off the
+ * boot is an acceptable trade-off.
+ */
+#define LCD_T3_DELAY_MS 60
+
+#define LCD_T5_DELAY_MS 10
+#define LCD_T6_DELAY_MS 10
+
+static void backlight_pwm(void)
+{
+ /*Configure backlight PWM as a simple output high (100% brightness) */
+ gpio_direction_output(bl_pwm, 1);
+ udelay(LCD_T6_DELAY_MS * 1000);
+}
+
+static void backlight_en(void)
+{
+ /* Configure GPIO for LCD_BL_EN */
+ gpio_direction_output(bl_en, 1);
+}
+
+//static struct video_info smdk5420_dp_config = {
+static struct video_info dp_video_info = {
+ /* FIXME: fix video_info struct to use const for name */
+ .name = (char *)"eDP-LVDS NXP PTN3460",
+
+ .h_sync_polarity = 0,
+ .v_sync_polarity = 0,
+ .interlaced = 0,
+
+ .color_space = COLOR_RGB,
+ .dynamic_range = VESA,
+ .ycbcr_coeff = COLOR_YCBCR601,
+ .color_depth = COLOR_8,
+
+ .link_rate = LINK_RATE_2_70GBPS,
+ .lane_count = LANE_COUNT2,
+};
+
+/* FIXME: move some place more appropriate */
+#define EXYNOS5420_DP1_BASE 0x145b0000
+#define MAX_DP_TRIES 5
+
+/*
+ * This function disables the USB3.0 PLL to save power
+ */
+static void disable_usb30_pll(void)
+{
+ enum exynos5_gpio_pin usb3_pll_l = GPIO_Y11;
+
+ gpio_direction_output(usb3_pll_l, 0);
+}
+
+static void gpio_init(void)
+{
+ /* Set up the I2C busses. */
+ exynos_pinmux_i2c2();
+ exynos_pinmux_i2c4();
+ exynos_pinmux_i2c7();
+ exynos_pinmux_i2c8();
+ exynos_pinmux_i2c9();
+ exynos_pinmux_i2c10();
+}
+
+enum {
+ FET_CTRL_WAIT = 3 << 2,
+ FET_CTRL_ADENFET = 1 << 1,
+ FET_CTRL_ENFET = 1 << 0
+};
+
+static void tps65090_thru_ec_fet_set(int index)
+{
+ uint8_t value = FET_CTRL_ADENFET | FET_CTRL_WAIT | FET_CTRL_ENFET;
+
+ if (google_chromeec_i2c_xfer(0x48, 0xe + index, 1, &value, 1, 0)) {
+ printk(BIOS_ERR,
+ "Error sending i2c pass through command to EC.\n");
+ return;
+ }
+}
+
+static void lcd_vdd(void)
+{
+ /* Enable FET6, lcd panel */
+ tps65090_thru_ec_fet_set(6);
+}
+
+static void backlight_vdd(void)
+{
+ /* Enable FET1, backlight */
+ tps65090_thru_ec_fet_set(1);
+}
+
+/* this happens after cpu_init where exynos resources are set */
+static void mainboard_init(device_t dev)
+{
+ struct s5p_dp_device dp_device = {
+ .base = (struct exynos5_dp *)EXYNOS5420_DP1_BASE,
+ .video_info = &dp_video_info,
+ };
+ void *fb_addr = (void *)(get_fb_base_kb() * KiB);
+
+ gpio_init();
+
+ tmu_init(&exynos5420_tmu_info);
+
+ /* Clock Gating all the unused IP's to save power */
+ clock_gate();
+
+ /* Disable USB3.0 PLL to save 250mW of power */
+ disable_usb30_pll();
+
+ set_vbe_mode_info_valid(&edid, (uintptr_t)fb_addr);
+
+ lcd_vdd();
+
+ parade_dp_bridge_setup();
+ dp_controller_init(&dp_device);
+
+ udelay(LCD_T3_DELAY_MS * 1000);
+
+ backlight_vdd();
+ backlight_pwm();
+ backlight_en();
+
+ // Uncomment to get excessive GPIO output:
+ // gpio_info();
+}
+
+static void mainboard_enable(device_t dev)
+{
+ dev->ops->init = &mainboard_init;
+
+#if !CONFIG_DYNAMIC_CBMEM
+ /* set up coreboot tables */
+ /* FIXME: this should happen somewhere else */
+ high_tables_size = CONFIG_COREBOOT_TABLES_SIZE;
+ high_tables_base = CONFIG_SYS_SDRAM_BASE +
+ ((unsigned)CONFIG_DRAM_SIZE_MB << 20ULL) -
+ CONFIG_COREBOOT_TABLES_SIZE;
+ cbmem_init(high_tables_base, high_tables_size);
+#endif
+
+ /* set up dcache and MMU */
+ /* FIXME: this should happen via resource allocator */
+ exynos5420_config_l2_cache();
+ mmu_init();
+ mmu_config_range(0, DRAM_START, DCACHE_OFF);
+ mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK);
+ mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF);
+ dcache_invalidate_all();
+ dcache_mmu_enable();
+
+ /* this is going to move, but we must have it now and we're
+ * not sure where */
+ exception_init();
+
+ const unsigned epll_hz = 192000000;
+ const unsigned sample_rate = 48000;
+ const unsigned lr_frame_size = 256;
+ clock_epll_set_rate(epll_hz);
+ clock_select_i2s_clk_source();
+ clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size);
+
+ power_enable_xclkout();
+}
+
+struct chip_operations mainboard_ops = {
+ .name = "Samsung/Google ARM Chromebook",
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/google/kirby/memory.c b/src/mainboard/google/kirby/memory.c
new file mode 100644
index 0000000000..74f3e6eb9c
--- /dev/null
+++ b/src/mainboard/google/kirby/memory.c
@@ -0,0 +1,110 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <console/console.h>
+
+#include <cpu/samsung/exynos5420/gpio.h>
+#include <cpu/samsung/exynos5420/dmc.h>
+#include <cpu/samsung/exynos5420/setup.h>
+#include <cpu/samsung/exynos5420/clk.h>
+
+const struct mem_timings mem_timings = {
+ .mem_manuf = MEM_MANUF_SAMSUNG,
+ .mem_type = DDR_MODE_DDR3,
+ .frequency_mhz = 800,
+ .direct_cmd_msr = {
+ 0x00020018, 0x00030000, 0x00010002, 0x00000d70
+ },
+ .timing_ref = 0x000000bb,
+ .timing_row = 0x6836650f,
+ .timing_data = 0x3630580b,
+ .timing_power = 0x41000a26,
+ .phy0_dqs = 0x08080808,
+ .phy1_dqs = 0x08080808,
+ .phy0_dq = 0x08080808,
+ .phy1_dq = 0x08080808,
+ .phy0_tFS = 0x8,
+ .phy1_tFS = 0x8,
+ .phy0_pulld_dqs = 0xf,
+ .phy1_pulld_dqs = 0xf,
+
+ .lpddr3_ctrl_phy_reset = 0x1,
+ .ctrl_start_point = 0x10,
+ .ctrl_inc = 0x10,
+ .ctrl_start = 0x1,
+ .ctrl_dll_on = 0x1,
+ .ctrl_ref = 0x8,
+
+ .ctrl_force = 0x1a,
+ .ctrl_rdlat = 0x0b,
+ .ctrl_bstlen = 0x08,
+
+ .fp_resync = 0x8,
+ .iv_size = 0x7,
+ .dfi_init_start = 1,
+ .aref_en = 1,
+
+ .rd_fetch = 0x3,
+
+ .zq_mode_dds = 0x6,
+ .zq_mode_term = 0x1,
+ .zq_mode_noterm = 1,
+
+ /*
+ * Dynamic Clock: Always Running
+ * Memory Burst length: 8
+ * Number of chips: 1
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 0 Cycle
+ */
+ .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+ DMC_MEMCONTROL_DPWRDN_DISABLE |
+ DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+ DMC_MEMCONTROL_TP_DISABLE |
+ DMC_MEMCONTROL_DSREF_DISABLE |
+ DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+ DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+ DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+ DMC_MEMCONTROL_NUM_CHIP_2 |
+ DMC_MEMCONTROL_BL_8 |
+ DMC_MEMCONTROL_PZQ_DISABLE |
+ DMC_MEMCONTROL_MRR_BYTE_7_0,
+ .memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT |
+ DMC_MEMCONFIGx_CHIP_COL_10 |
+ DMC_MEMCONFIGx_CHIP_ROW_15 |
+ DMC_MEMCONFIGx_CHIP_BANK_8,
+ .prechconfig_tp_cnt = 0xff,
+ .dpwrdn_cyc = 0xff,
+ .dsref_cyc = 0xffff,
+ .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+ DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+ DMC_CONCONTROL_RD_FETCH_DISABLE |
+ DMC_CONCONTROL_EMPTY_DISABLE |
+ DMC_CONCONTROL_AREF_EN_DISABLE |
+ DMC_CONCONTROL_IO_PD_CON_DISABLE,
+ .dmc_channels = 1,
+ .chips_per_channel = 2,
+ .chips_to_configure = 2,
+ .send_zq_init = 1,
+ .gate_leveling_enable = 1,
+};
diff --git a/src/mainboard/google/kirby/romstage.c b/src/mainboard/google/kirby/romstage.c
new file mode 100644
index 0000000000..255f292b8a
--- /dev/null
+++ b/src/mainboard/google/kirby/romstage.c
@@ -0,0 +1,280 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <stdlib.h>
+
+#include <armv7.h>
+#include <cbfs.h>
+#include <cbmem.h>
+
+#include <arch/cache.h>
+#include <cpu/samsung/exynos5420/i2c.h>
+#include <cpu/samsung/exynos5420/clk.h>
+#include <cpu/samsung/exynos5420/cpu.h>
+#include <cpu/samsung/exynos5420/dmc.h>
+#include <cpu/samsung/exynos5420/gpio.h>
+#include <cpu/samsung/exynos5420/setup.h>
+#include <cpu/samsung/exynos5420/periph.h>
+#include <cpu/samsung/exynos5420/power.h>
+#include <cpu/samsung/exynos5420/wakeup.h>
+#include <console/console.h>
+#include <arch/stages.h>
+
+#include <drivers/maxim/max77802/max77802.h>
+#include <device/i2c.h>
+
+#include "exynos5420.h"
+
+#define MMC0_GPIO_PIN (58)
+
+struct pmic_write
+{
+ int or_orig; // Whether to or in the original value.
+ uint8_t reg; // Register to write.
+ uint8_t val; // Value to write.
+};
+
+/*
+ * Use read-modify-write for MAX77802 control registers and clobber the
+ * output voltage setting (BUCK?DVS?) registers.
+ */
+struct pmic_write pmic_writes[] =
+{
+ { 1, MAX77802_REG_PMIC_32KHZ, MAX77802_32KHCP_EN },
+ { 0, MAX77802_REG_PMIC_BUCK1DVS1, MAX77802_BUCK1DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK1CTRL, MAX77802_BUCK_TYPE1_ON |
+ MAX77802_BUCK_TYPE1_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK2DVS1, MAX77802_BUCK2DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK2CTRL1, MAX77802_BUCK_TYPE2_ON |
+ MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK3DVS1, MAX77802_BUCK3DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK3CTRL1, MAX77802_BUCK_TYPE2_ON |
+ MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK4DVS1, MAX77802_BUCK4DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK4CTRL1, MAX77802_BUCK_TYPE2_ON |
+ MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
+ { 0, MAX77802_REG_PMIC_BUCK6DVS1, MAX77802_BUCK6DVS1_1V },
+ { 1, MAX77802_REG_PMIC_BUCK6CTRL, MAX77802_BUCK_TYPE1_ON |
+ MAX77802_BUCK_TYPE1_IGNORE_PWRREQ },
+ { 1, MAX77802_REG_PMIC_LDO35CTRL1, MAX77802_LDO35CTRL1_1_2V },
+};
+
+static void setup_power(int is_resume)
+{
+ int error = 0;
+ int i;
+
+ power_init();
+
+ if (is_resume) {
+ return;
+ }
+
+ /* Initialize I2C bus to configure PMIC. */
+ exynos_pinmux_i2c4();
+ i2c_init(4, I2C_4_SPEED, 0x00);
+
+ printk(BIOS_DEBUG, "%s: Setting up PMIC...\n", __func__);
+
+ for (i = 0; i < ARRAY_SIZE(pmic_writes); i++) {
+ uint8_t data = 0;
+ uint8_t reg = pmic_writes[i].reg;
+
+ if (pmic_writes[i].or_orig)
+ error |= i2c_read(4, MAX77802_I2C_ADDR,
+ reg, sizeof(reg),
+ &data, sizeof(data));
+ data |= pmic_writes[i].val;
+ error |= i2c_write(4, MAX77802_I2C_ADDR,
+ reg, sizeof(reg),
+ &data, sizeof(data));
+ }
+
+ if (error)
+ die("Failed to intialize PMIC.\n");
+}
+
+static void setup_storage(void)
+{
+ /* MMC0: Fixed, 8 bit mode, connected with GPIO. */
+ if (clock_set_dwmci(PERIPH_ID_SDMMC0))
+ printk(BIOS_CRIT, "%s: Failed to set MMC0 clock.\n", __func__);
+ exynos_pinmux_sdmmc0();
+
+ /* MMC2: Removable, 4 bit mode, no GPIO. */
+ clock_set_dwmci(PERIPH_ID_SDMMC2);
+ exynos_pinmux_sdmmc2();
+}
+
+static void setup_ec(void)
+{
+ /* SPI2 (EC) is slower and needs to work in half-duplex mode with
+ * single byte bus width. */
+ clock_set_rate(PERIPH_ID_SPI2, 5000000);
+ exynos_pinmux_spi2();
+}
+
+static void setup_gpio(void)
+{
+ gpio_direction_input(GPIO_X30); // WP_GPIO
+ gpio_set_pull(GPIO_X30, GPIO_PULL_NONE);
+
+ gpio_direction_input(GPIO_X07); // RECMODE_GPIO
+ gpio_set_pull(GPIO_X07, GPIO_PULL_NONE);
+
+ gpio_direction_input(GPIO_X34); // LID_GPIO
+ gpio_set_pull(GPIO_X34, GPIO_PULL_NONE);
+
+ gpio_direction_input(GPIO_X12); // POWER_GPIO
+ gpio_set_pull(GPIO_X12, GPIO_PULL_NONE);
+}
+
+static void setup_memory(struct mem_timings *mem, int is_resume)
+{
+ printk(BIOS_SPEW, "manufacturer: 0x%x type: 0x%x, div: 0x%x, mhz: %d\n",
+ mem->mem_manuf,
+ mem->mem_type,
+ mem->mpll_mdiv,
+ mem->frequency_mhz);
+
+ if (ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE, !is_resume)) {
+ die("Failed to initialize memory controller.\n");
+ }
+}
+
+#define PRIMITIVE_MEM_TEST 0
+#if PRIMITIVE_MEM_TEST
+static unsigned long primitive_mem_test(void)
+{
+ unsigned long *l = (void *)0x40000000;
+ int bad = 0;
+ unsigned long i;
+ for(i = 0; i < 256*1048576; i++){
+ if (! (i%1048576))
+ printk(BIOS_SPEW, "%lu ...", i);
+ l[i] = 0xffffffff - i;
+ }
+
+ for(i = 0; i < 256*1048576; i++){
+ if (! (i%1048576))
+ printk(BIOS_SPEW, "%lu ...", i);
+ if (l[i] != (0xffffffff - i)){
+ printk(BIOS_SPEW, "%p: want %08lx got %08lx\n", l, l[i], 0xffffffff - i);
+ bad++;
+ }
+ }
+
+ printk(BIOS_SPEW, "%d errors\n", bad);
+
+ return bad;
+}
+#else
+#define primitive_mem_test()
+#endif
+
+#define SIMPLE_SPI_TEST 0
+#if SIMPLE_SPI_TEST
+/* here is a simple SPI debug test, known to fid trouble */
+static void simple_spi_test(void)
+{
+ struct cbfs_media default_media, *media;
+ int i, amt = 4 * MiB, errors = 0;
+ //u32 *data = (void *)0x40000000;
+ u32 data[1024];
+ u32 in;
+
+ amt = sizeof(data);
+ media = &default_media;
+ if (init_default_cbfs_media(media) != 0) {
+ printk(BIOS_SPEW, "Failed to initialize default media.\n");
+ return;
+ }
+
+
+ media->open(media);
+ if (media->read(media, data, (size_t) 0, amt) < amt){
+ printk(BIOS_SPEW, "simple_spi_test fails\n");
+ return;
+ }
+
+
+ for(i = 0; i < amt; i += 4){
+ if (media->read(media, &in, (size_t) i, 4) < 1){
+ printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i);
+ return;
+ }
+ if (data[i/4] != in){
+ errors++;
+ printk(BIOS_SPEW, "BAD at %d(%p):\nRAM %08lx\nSPI %08lx\n",
+ i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in);
+ /* reread it to see which is wrong. */
+ if (media->read(media, &in, (size_t) i, 4) < 1){
+ printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i);
+ return;
+ }
+ printk(BIOS_SPEW, "RTRY at %d(%p):\nRAM %08lx\nSPI %08lx\n",
+ i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in);
+ }
+
+ }
+ printk(BIOS_SPEW, "%d errors\n", errors);
+}
+#else
+#define simple_spi_test()
+#endif
+
+void main(void)
+{
+
+ extern struct mem_timings mem_timings;
+ void *entry;
+ int is_resume = (get_wakeup_state() != IS_NOT_WAKEUP);
+
+ /* Clock must be initialized before console_init, otherwise you may need
+ * to re-initialize serial console drivers again. */
+ system_clock_init();
+
+ console_init();
+
+ setup_power(is_resume);
+ setup_memory(&mem_timings, is_resume);
+
+ primitive_mem_test();
+
+ if (is_resume) {
+ wakeup();
+ }
+
+ setup_storage();
+ setup_gpio();
+ setup_ec();
+
+ simple_spi_test();
+ /* Set SPI (primary CBFS media) clock to 50MHz. */
+ /* if this is uncommented SPI will not work correctly. */
+ clock_set_rate(PERIPH_ID_SPI1, 50000000);
+ simple_spi_test();
+
+ cbmem_initialize_empty();
+
+ entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram");
+ simple_spi_test();
+ stage_exit(entry);
+}
diff --git a/src/mainboard/google/kirby/wakeup.c b/src/mainboard/google/kirby/wakeup.c
new file mode 100644
index 0000000000..a82b63299c
--- /dev/null
+++ b/src/mainboard/google/kirby/wakeup.c
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <cpu/samsung/exynos5420/gpio.h>
+#include <cpu/samsung/exynos5420/wakeup.h>
+
+int wakeup_need_reset(void)
+{
+ /* The "wake up" event is not reliable (known as "bad wakeup") and needs
+ * reset if GPIO value is high. */
+ return gpio_get_value(GPIO_Y10);
+}
+