mb/google/hatch: Enable H1 TPM support over SPI interface

Add code support to enable H1 TPM interfaced to SOC on GSPI0.
The TPM interrupt is mapped to GPP_C21.

BUG=b:120914069
TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot

Change-Id: Ib63a0b473f632d91745102ebd01993e8d65b9552
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/30210
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

3 files changed, 70 insertions, 10 deletions

diff --git a/src/mainboard/google/hatch/Kconfig b/src/mainboard/google/hatch/Kconfig
index 7acfd09ce1..1c0208ff68 100644
--- a/src/mainboard/google/hatch/Kconfig
+++ b/src/mainboard/google/hatch/Kconfig
@@ -10,14 +10,13 @@ config BOARD_GOOGLE_BASEBOARD_HATCH
 	select HAVE_ACPI_RESUME
 	select HAVE_ACPI_TABLES
 	select MAINBOARD_HAS_CHROMEOS
-	select MAINBOARD_HAS_I2C_TPM_CR50
+	select MAINBOARD_HAS_SPI_TPM_CR50
 	select MAINBOARD_HAS_TPM2
 	select SOC_INTEL_CANNONLAKE_MEMCFG_INIT
 	select SOC_INTEL_COMMON_ACPI_EC_PTS_WAK
 	select SOC_INTEL_COFFEELAKE
 	select SPD_READ_BY_WORD
 	select SYSTEM_TYPE_LAPTOP
-	select TPM2
 
 if BOARD_GOOGLE_BASEBOARD_HATCH
 
@@ -29,6 +28,10 @@ config CHROMEOS
 	select GBB_FLAG_FORCE_DEV_BOOT_LEGACY
 	select GBB_FLAG_FORCE_MANUAL_RECOVERY
 
+config DEVICETREE
+	string
+	default "variants/baseboard/devicetree.cb"
+
 config DIMM_MAX
 	int
 	default 2
@@ -37,6 +40,9 @@ config DIMM_SPD_SIZE
 	int
 	default 512
 
+config DRIVER_TPM_SPI_BUS
+	default 0x1
+
 config GBB_HWID
 	string
 	depends on CHROMEOS
@@ -62,17 +68,17 @@ config MAX_CPUS
 	int
 	default 8
 
-config VARIANT_DIR
+config OVERRIDE_DEVICETREE
 	string
-	default "hatch" if BOARD_GOOGLE_HATCH
+	default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" if !BOARD_GOOGLE_HATCH
 
-config DEVICETREE
-	string
-	default "variants/baseboard/devicetree.cb"
+config TPM_TIS_ACPI_INTERRUPT
+	int
+	default 53 # GPE0_DW1_21 (GPP_C21)
 
-config OVERRIDE_DEVICETREE
+config VARIANT_DIR
 	string
-	default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" if !BOARD_GOOGLE_HATCH
+	default "hatch" if BOARD_GOOGLE_HATCH
 
 config VBOOT
 	select HAS_RECOVERY_MRC_CACHE
diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
index 88df092155..4fe0c4cd70 100644
--- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
@@ -1,4 +1,31 @@
 chip soc/intel/cannonlake
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route. i.e. If this route changes then the affected GPE
+	# offset bits also need to be changed.
+	# DW1 is used by:
+	#   - GPP_C21 - H1_PCH_INT_ODL
+	register "gpe0_dw0" = "PMC_GPP_A"
+	register "gpe0_dw1" = "PMC_GPP_C"
+	register "gpe0_dw2" = "PMC_GPP_D"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+	}"
+
 	device domain 0 on
 		device pci 00.0 off end # Host Bridge
 		device pci 02.0 off end # Integrated Graphics Device
@@ -39,7 +66,14 @@ chip soc/intel/cannonlake
 		device pci 1d.4 off end # PCI Express Port 13 (x4)
 		device pci 1e.0 off end # UART #0
 		device pci 1e.1 off end # UART #1
-		device pci 1e.2 off end # GSPI #0
+		device pci 1e.2 on
+			chip drivers/spi/acpi
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "compat_string" = ""google,cr50""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C21_IRQ)"
+				device spi 0 on end
+			end
+		end # GSPI #0
 		device pci 1e.3 off end # GSPI #1
 		device pci 1f.0 off end # LPC/eSPI
 		device pci 1f.1 off end # P2SB
diff --git a/src/mainboard/google/hatch/variants/baseboard/gpio.c b/src/mainboard/google/hatch/variants/baseboard/gpio.c
index 6f6b9d2877..2517a58823 100644
--- a/src/mainboard/google/hatch/variants/baseboard/gpio.c
+++ b/src/mainboard/google/hatch/variants/baseboard/gpio.c
@@ -19,6 +19,16 @@
 #include <commonlib/helpers.h>
 
 static const struct pad_config gpio_table[] = {
+	/* H1_SLAVE_SPI_CS_L */
+	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
+	/* H1_SLAVE_SPI_CLK */
+	PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
+	/* H1_SLAVE_SPI_MISO_R */
+	PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
+	/* H1_SLAVE_SPI_MOSI_R */
+	PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
+	/* H1_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_C21, NONE, DEEP, LEVEL, INVERT),
 };
 
 const struct pad_config *__weak variant_gpio_table(size_t *num)
@@ -29,6 +39,16 @@ const struct pad_config *__weak variant_gpio_table(size_t *num)
 
 /* GPIOs needed prior to ramstage. */
 static const struct pad_config early_gpio_table[] = {
+	/* H1_SLAVE_SPI_CS_L */
+	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
+	/* H1_SLAVE_SPI_CLK */
+	PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
+	/* H1_SLAVE_SPI_MISO_R */
+	PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
+	/* H1_SLAVE_SPI_MOSI_R */
+	PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
+	/* H1_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_C21, NONE, DEEP, LEVEL, INVERT),
 };
 
 const struct pad_config *__weak variant_early_gpio_table(size_t *num)