summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
authorNaveen Manohar <naveen.m@intel.com>2018-05-10 08:54:14 +0530
committerMartin Roth <martinroth@google.com>2018-06-01 16:25:13 +0000
commite098c8a59346df4c7a17ec7aec04bcf4e3bf1f61 (patch)
treee4f426e83b83b03d59afdb9f06be840fdd1c4ce7 /src/mainboard/google
parent39130a4f1ee66fcb6c9acf4c3cf7488e50a2271c (diff)
downloadcoreboot-e098c8a59346df4c7a17ec7aec04bcf4e3bf1f61.tar.xz
mb/google/octopus: Enable RT5682 headset codec for BIP board
Patch adds required changes for RT5682 codec enablement for the BIP board. And code clean-up nhlt blob selection method in config. BUG=b:77892150 TEST=build and boot on a BIP PO board. verify headset codec i2cdetects at address 1a. Change-Id: Iee91518c03a0e9e6ed52bc54a60fc607730a0b7d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/26211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/octopus/Kconfig4
-rw-r--r--src/mainboard/google/octopus/Kconfig.name3
-rw-r--r--src/mainboard/google/octopus/variants/baseboard/nhlt.c15
-rw-r--r--src/mainboard/google/octopus/variants/bip/devicetree.cb16
-rw-r--r--src/mainboard/google/octopus/variants/bip/gpio.c3
5 files changed, 34 insertions, 7 deletions
diff --git a/src/mainboard/google/octopus/Kconfig b/src/mainboard/google/octopus/Kconfig
index 79af95c238..b0957b8e42 100644
--- a/src/mainboard/google/octopus/Kconfig
+++ b/src/mainboard/google/octopus/Kconfig
@@ -85,9 +85,9 @@ config UART_FOR_CONSOLE
default 2
config INCLUDE_NHLT_BLOBS
- bool "Include blobs for audio."
+ bool "Include blobs for audio"
+ select NHLT_DMIC_2CH_16B
select NHLT_DMIC_4CH_16B
- select NHLT_DA7219
select NHLT_MAX98357
config DRIVER_TPM_SPI_BUS
diff --git a/src/mainboard/google/octopus/Kconfig.name b/src/mainboard/google/octopus/Kconfig.name
index 596da3bbce..c9eab1a1cc 100644
--- a/src/mainboard/google/octopus/Kconfig.name
+++ b/src/mainboard/google/octopus/Kconfig.name
@@ -8,11 +8,14 @@ config BOARD_GOOGLE_YORP
bool "-> Yorp"
select BOARD_GOOGLE_BASEBOARD_OCTOPUS
select BASEBOARD_OCTOPUS_LAPTOP
+ select NHLT_DA7219 if INCLUDE_NHLT_BLOBS
config BOARD_GOOGLE_BIP
bool "-> Bip"
select BOARD_GOOGLE_BASEBOARD_OCTOPUS
select BASEBOARD_OCTOPUS_LAPTOP
+ select NHLT_RT5682 if INCLUDE_NHLT_BLOBS
config BOARD_GOOGLE_PHASER
bool "-> Phaser"
select BOARD_GOOGLE_BASEBOARD_OCTOPUS
select BASEBOARD_OCTOPUS_LAPTOP
+ select NHLT_DA7219 if INCLUDE_NHLT_BLOBS
diff --git a/src/mainboard/google/octopus/variants/baseboard/nhlt.c b/src/mainboard/google/octopus/variants/baseboard/nhlt.c
index 94403a8c35..b71aadf9d0 100644
--- a/src/mainboard/google/octopus/variants/baseboard/nhlt.c
+++ b/src/mainboard/google/octopus/variants/baseboard/nhlt.c
@@ -29,12 +29,21 @@ void __weak variant_nhlt_init(struct nhlt *nhlt)
if (!nhlt_soc_add_dmic_array(nhlt, 4))
printk(BIOS_ERR, "Added 4CH DMIC arrays.\n");
- /* Dialog for Headset codec.
+ /*
* Headset codec is bi-directional but uses the same configuration
* settings for render and capture endpoints.
*/
- if (!nhlt_soc_add_da7219(nhlt, AUDIO_LINK_SSP2))
- printk(BIOS_ERR, "Added Dialog_7219 codec.\n");
+ if (IS_ENABLED(CONFIG_NHLT_DA7219)) {
+ /* Dialog for Headset codec */
+ if (!nhlt_soc_add_da7219(nhlt, AUDIO_LINK_SSP2))
+ printk(BIOS_ERR, "Added Dialog_7219 codec.\n");
+ }
+
+ if (IS_ENABLED(CONFIG_NHLT_RT5682)) {
+ /* Realtek for Headset codec */
+ if (!nhlt_soc_add_rt5682(nhlt, AUDIO_LINK_SSP2))
+ printk(BIOS_ERR, "Added ALC5682 codec.\n");
+ }
/* MAXIM Smart Amps for left and right speakers. */
if (!nhlt_soc_add_max98357(nhlt, AUDIO_LINK_SSP1))
diff --git a/src/mainboard/google/octopus/variants/bip/devicetree.cb b/src/mainboard/google/octopus/variants/bip/devicetree.cb
index 860ca7933a..fcfaa4a9a3 100644
--- a/src/mainboard/google/octopus/variants/bip/devicetree.cb
+++ b/src/mainboard/google/octopus/variants/bip/devicetree.cb
@@ -142,7 +142,21 @@ chip soc/intel/apollolake
device pci 16.2 on end # - I2C 2
device pci 16.3 on end # - I2C 3
device pci 17.0 on end # - I2C 4
- device pci 17.1 on end # - I2C 5
+ device pci 17.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""10EC5682""
+ register "name" = ""RT58""
+ register "desc" = ""Realtek RT5682""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
+ register "probed" = "1"
+ register "property_count" = "1"
+ # Set the jd_src to RT5668_JD1 for jack detection
+ register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+ register "property_list[0].name" = ""realtek,jd-src""
+ register "property_list[0].integer" = "1"
+ device i2c 1a on end
+ end
+ end # - I2C 5
device pci 17.2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
diff --git a/src/mainboard/google/octopus/variants/bip/gpio.c b/src/mainboard/google/octopus/variants/bip/gpio.c
index 17fc1050f3..e809ca2c61 100644
--- a/src/mainboard/google/octopus/variants/bip/gpio.c
+++ b/src/mainboard/google/octopus/variants/bip/gpio.c
@@ -193,7 +193,8 @@ static const struct pad_config gpio_table[] = {
PAD_CFG_GPI(GPIO_134, NONE, DEEP),/* GPIO_134 -- SD_CD_OD */
PAD_CFG_GPI_APIC_LOW(GPIO_135, NONE, DEEP),/* GPIO_135 -- TRACKPAD_INT1_1V8_ODL */
PAD_CFG_GPI_APIC_IOS(GPIO_136, NONE, DEEP, LEVEL, INVERT, TxDRxE, DISPUPD),/* GPIO_136 -- PMIC_PCH_INT_ODL */
- PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1, DISPUPD),/* GPIO_137 -- HP_INT_ODL */
+ PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, EDGE_BOTH, INVERT, HIZCRx1,
+ DISPUPD),/* GPIO_137 -- HP_INT_ODL */
PAD_CFG_GPI(GPIO_138, NONE, DEEP),/* GPIO_138 -- PEN_PDCT_ODL */
PAD_CFG_GPI_APIC_IOS(GPIO_139, NONE, DEEP, LEVEL, INVERT, HIZCRx1, DISPUPD),/* GPIO_138 -- PEN_INT_ODL */
PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RXDCRx0, DISPUPD),/* GPIO_140 -- PEN_RESET */