amd/geode_lx: Remove most boards

There is active work to convert remaining two boards,
PC Engines alix1c and alix2d, to EARLY_CBMEM_INIT.

Change-Id: I87e3963af7ef719e9fa2a8b0df34a896265905f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

6 files changed, 0 insertions, 476 deletions

diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig
deleted file mode 100644
index 74a3c102de..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-if BOARD_IEI_PCISA_LX_800_R10
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_AMD_GEODE_LX
-	select NORTHBRIDGE_AMD_LX
-	select SOUTHBRIDGE_AMD_CS5536
-	select SUPERIO_WINBOND_W83627HF
-	select HAVE_PIRQ_TABLE
-	select PIRQ_ROUTE
-	select BOARD_ROMSIZE_KB_256
-	select POWER_BUTTON_FORCE_ENABLE
-	select PLL_MANUAL_CONFIG
-	select CORE_GLIU_500_266
-
-config MAINBOARD_DIR
-	string
-	default iei/pcisa-lx-800-r10
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "PCISA-LX-800-R10"
-
-config IRQ_SLOT_COUNT
-	int
-	default 9
-
-config PLLMSRlo
-	hex
-	default 0x00DE6000
-
-endif # BOARD_IEI_PCISA_LX_800_R10
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig.name b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig.name
deleted file mode 100644
index 84d2f492d3..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_IEI_PCISA_LX_800_R10
-	bool "PCISA LX-800-R10"
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt b/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt
deleted file mode 100644
index b5a9773a84..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Category: half
-Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=PCISA-LX
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb
deleted file mode 100644
index 99851b8fd7..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb
+++ /dev/null
@@ -1,75 +0,0 @@
-chip northbridge/amd/lx
-	device domain 0 on
-		device pci 1.0 on end				# Northbridge
-		device pci 1.1 on end				# Graphics
-		chip southbridge/amd/cs5536
-			# IRQ 12 and 1 unmasked,  Keyboard and Mouse IRQs. OK
-			# SIRQ Mode = Active(Quiet) mode. Save power....
-			# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
-			register "lpc_serirq_enable" = "0x0000105a"
-			register "lpc_serirq_polarity" = "0x0000EFA5"
-			register "lpc_serirq_mode" = "1"
-			register "enable_gpio_int_route" = "0x0D0C0700"
-			register "enable_ide_nand_flash" = "0"	# 0:ide mode, 1:flash
-			register "enable_USBP4_device" = "1"	# 0: host, 1:device
-			register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
-			register "com1_enable" = "0"
-			register "com1_address" = "0x3F8"
-			register "com1_irq" = "4"
-			register "com2_enable" = "0"
-			register "com2_address" = "0x2F8"
-			register "com2_irq" = "3"
-			register "unwanted_vpci[0]" = "0"	# End of list has a zero
-			device pci 9.0 on end			# Slot1
-			device pci a.0 on end			# Slot2
-			device pci b.0 on end			# Slot3
-			device pci c.0 on end			# Slot4
-			device pci e.0 on end			# Ethernet 0
-			device pci 10.0 on end			# Ethernet 1
-			device pci 11.0 on end			# SATA
-			device pci f.0 on			# ISA Bridge
-				chip superio/winbond/w83627hf
-					device pnp 2e.0 off	# Floppy
-						io 0x60 = 0x3f0
-						irq 0x70 = 6
-						drq 0x74 = 2
-					end
-					device pnp 2e.1 off	# Parallel port
-						io 0x60 = 0x378
-						irq 0x70 = 7
-					end
-					device pnp 2e.2 on	# Com1
-						io 0x60 = 0x3f8
-						irq 0x70 = 4
-					end
-					device pnp 2e.3 on	# Com2
-						io 0x60 = 0x2f8
-						irq 0x70 = 3
-					end
-					device pnp 2e.5 on	# Keyboard
-						io 0x60 = 0x60
-						io 0x62 = 0x64
-						irq 0x70 = 1
-						irq 0x72 = 12
-					end
-					device pnp 2e.6 off end	# CIR
-					device pnp 2e.7 off end	# GAME_MIDI_GIPO1
-					device pnp 2e.8 off end	# GPIO2
-					device pnp 2e.9 off end	# GPIO3
-					device pnp 2e.a off end	# ACPI
-					device pnp 2e.b off end	# HW Monitor
-				end
-			end
-			device pci f.2 on end			# IDE Controller
-			device pci f.3 on end			# Audio
-			device pci f.4 on end			# OHCI
-			device pci f.5 on end			# EHCI
-		end
-	end
-	# APIC cluster is late CPU init.
-	device cpu_cluster 0 on
-		chip cpu/amd/geode_lx
-			device lapic 0 on end
-		end
-	end
-end
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c b/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c
deleted file mode 100644
index 69dd16d8a2..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <arch/pirq_routing.h>
-// #include <console/console.h>
-#include <arch/io.h>
-
-/* Platform IRQs */
-#define PIRQA 11
-#define PIRQB 10
-#define PIRQC 11
-#define PIRQD 5
-
-/* Link */
-#define LINK_PIRQA 1
-#define LINK_PIRQB 2
-#define LINK_PIRQC 3
-#define LINK_PIRQD 4
-#define LINK_NONE 0
-
-/* Map */
-#define IRQ_BITMAP_LINKA (1 << PIRQA)
-#define IRQ_BITMAP_LINKB (1 << PIRQB)
-#define IRQ_BITMAP_LINKC (1 << PIRQC)
-#define IRQ_BITMAP_LINKD (1 << PIRQD)
-#define IRQ_BITMAP_NOLINK 0x0
-
-#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD)
-
-static const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,		/* u32 signature */
-	PIRQ_VERSION,		/* u16 version   */
-	32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
-	0x00,			/* Where the interrupt router lies (bus) */
-	(0x0F << 3) | 0x0,	/* Where the interrupt router lies (dev) */
-	EXCLUSIVE_PCI_IRQS,	/* IRQs devoted exclusively to PCI usage */
-	0x1078,			/* Vendor */
-	0x0002,			/* Device */
-	0,			/* Miniport data */
-	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},	/* u8 rfu[11] */
-	0x62,			/* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
-
-	.slots = {
-		[0] = {
-			.slot = 0x0,	/* means also "on board" */
-			.bus = 0x00,
-			.devfn = (0x01 << 3)|0x0,	/* 0x01 is CS5536 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQA,
-					.bitmap = IRQ_BITMAP_LINKA
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				}
-			}
-		},
-
-		[1] = {
-			.slot = 0x0,	/* means also "on board" */
-			.bus = 0x00,
-			.devfn = (0x0f << 3)|0x0,	/* 0x0f is CS5536 (USB, AUDIO) */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_PIRQB, /* Audio */
-					.bitmap = IRQ_BITMAP_LINKB
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_PIRQD, /* USB */
-					.bitmap = IRQ_BITMAP_LINKD
-				}
-			}
-		},
-
-		[2] = {
-			.slot = 0x0,	/* means also "on board" */
-			.bus = 0x00,
-			.devfn = (0x0e << 3)|0x0,	/* 0x0e is eth0 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQD,
-					.bitmap = IRQ_BITMAP_LINKD
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				}
-			}
-		},
-
-		[3] = {
-			.slot = 0x0,	/* means also "on board" */
-			.bus = 0x00,
-			.devfn = (0x10 << 3)|0x0,	/* 0x10 is eth1 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQB,
-					.bitmap = IRQ_BITMAP_LINKB
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				}
-			}
-		},
-
-		[4] = {
-			.slot = 0x0,	/* means also "on board" */
-			.bus = 0x00,
-			.devfn = (0x11 << 3)|0x0,	/* 0x11 is SATA */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQA,
-					.bitmap = IRQ_BITMAP_LINKA
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_NONE,
-					.bitmap = IRQ_BITMAP_NOLINK
-				}
-			}
-		},
-
-/*
- * ################### backplane ###################
- */
-
-/*
- * PCI1
- */
-		[5] = {
-			.slot = 0x1,	/* This is real PCI slot. */
-			.bus = 0x00,
-			.devfn = (0x09 << 3)|0x0,	/* 0x09 is PCI1 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQA,
-					.bitmap = IRQ_BITMAP_LINKA
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_PIRQB,
-					.bitmap = IRQ_BITMAP_LINKB
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_PIRQC,
-					.bitmap = IRQ_BITMAP_LINKC
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_PIRQD,
-					.bitmap = IRQ_BITMAP_LINKD
-				}
-			}
-		},
-/*
- * PCI2
- */
-		[6] = {
-			.slot = 0x2,	/* This is real PCI slot. */
-			.bus = 0x00,
-			.devfn = (0x0a << 3)|0x0,	/* 0x0a is PCI2 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQD,
-					.bitmap = IRQ_BITMAP_LINKD
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_PIRQA,
-					.bitmap = IRQ_BITMAP_LINKA
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_PIRQB,
-					.bitmap = IRQ_BITMAP_LINKB
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_PIRQC,
-					.bitmap = IRQ_BITMAP_LINKC
-				}
-			}
-		},
-/*
- * PCI3
- */
-		[7] = {
-			.slot = 0x3,	/* This is real PCI slot. */
-			.bus = 0x00,
-			.devfn = (0x0b << 3)|0x0,	/* 0x0b is PCI3 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQC,
-					.bitmap = IRQ_BITMAP_LINKC
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_PIRQD,
-					.bitmap = IRQ_BITMAP_LINKD
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_PIRQA,
-					.bitmap = IRQ_BITMAP_LINKA
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_PIRQB,
-					.bitmap = IRQ_BITMAP_LINKB
-				}
-			}
-		},
-/*
- * PCI4
- */
-		[8] = {
-			.slot = 0x4,	/* This is real PCI slot. */
-			.bus = 0x00,
-			.devfn = (0x0c << 3)|0x0,	/* 0x0c is PCI4 */
-			.irq = {
-				[0] = {	/* <-- 0 means this is INTA# output from the device or slot */
-					.link = LINK_PIRQB,
-					.bitmap = IRQ_BITMAP_LINKB
-				},
-				[1] = {	/* <-- 1 means this is INTB# output from the device or slot */
-					.link = LINK_PIRQC,
-					.bitmap = IRQ_BITMAP_LINKC
-				},
-				[2] = {	/* <-- 2 means this is INTC# output from the device or slot */
-					.link = LINK_PIRQD,
-					.bitmap = IRQ_BITMAP_LINKD
-				},
-				[3] = {	/* <-- 3 means this is INTD# output from the device or slot */
-					.link = LINK_PIRQA,
-					.bitmap = IRQ_BITMAP_LINKA
-				}
-			}
-		},
-	}
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-	/* Put the PIR table in memory and checksum. */
-	return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
deleted file mode 100644
index 67b5266bac..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <stdlib.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <console/console.h>
-#include <cpu/x86/bist.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/car.h>
-#include <cpu/amd/lxdef.h>
-#include <southbridge/amd/cs5536/cs5536.h>
-#include <spd.h>
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627hf/w83627hf.h>
-#include <northbridge/amd/lx/raminit.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-int spd_read_byte(unsigned int device, unsigned int address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/lx/pll_reset.c"
-#include "cpu/amd/geode_lx/cpureginit.c"
-#include "cpu/amd/geode_lx/syspreinit.c"
-#include "cpu/amd/geode_lx/msrinit.c"
-
-void asmlinkage mainboard_romstage_entry(unsigned long bist)
-{
-
-	static const struct mem_controller memctrl[] = {
-		{.channel0 = {DIMM0, DIMM1}}
-	};
-
-	SystemPreInit();
-	msr_init();
-
-	cs5536_early_setup();
-
-	/* Note: must do this AFTER the early_setup! It is counting on some
-	 * early MSR setup for CS5536.
-	 */
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	pll_reset();
-
-	cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
-
-	sdram_initialize(1, memctrl);
-
-	/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
-}