summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/emeraldlake2/acpi
diff options
context:
space:
mode:
authorGabe Black <gabeblack@google.com>2012-03-29 18:04:56 -0700
committerStefan Reinauer <stefan.reinauer@coreboot.org>2012-05-01 19:33:58 +0200
commitf40a2590acf4db45fa89098b9e406e45ffaffc0c (patch)
treed8aa31447dae2f26e53ddcbf4aecc031d6565537 /src/mainboard/intel/emeraldlake2/acpi
parente6063fee5c954d5acd80fd51e11aeac31e83d13d (diff)
downloadcoreboot-f40a2590acf4db45fa89098b9e406e45ffaffc0c.tar.xz
Set up ChromeOS dev mode, recovery, and write protect GPIOs on Emerald Lake 2.
The Emerald Lake 2 CRB wasn't designed with ChromeOS in mind, so there aren't any actual developer mode, recovery mode, or write protect switches, let alone GPIOs to read them from. Instead, I've commandeered signals connected to GPIOs which are for other things but which aren't used by hardware or, for instance, the EC to do something Coreboot doesn't control. The recovery mode switch is connected to GPIO 22 and is called BIOS_REC on the schematic. The name is at least very reminiscent of the right thing even if it's supposed to be used for something else. There's a jumper on the board labelled J8G1 which can force the line to ground, and if not, there's a switch on the front of the case which toggles its value. "RECOVER" is for recovery mode and "KEEP" is for normal mode. The developer mode switch is connected to GPIO 57 and is called SV_DET on the schematic. It's connected to a jumper labelled J8E2 on the board and, as far as I can tell, can't be controlled in any other way. When the jumper is in place and the pins are shorted, developer mode is selected. When the jumper is removed, normal mode is selected. The write protect is connected to GPIO 48 which is called BIOS_RESP on the schematic. It's connected to a jumper labelled J8E3 which, like j8E2, seems to be the only way to control the line it's on. When the jumper is in place, write protect is "disabled", and when it's in place it's "enabled" even though there's no functional difference. The input for the recovery mode switch was chosen because of the name it already had on the CRB, BIOS recovery, and because there's a switch to control it on the front of the case which makes it easy to get at. The jumpers for developer mode and recovery mode were chosen because there weren't very many options available, and of those these were next to each other which should make them easier to find and work with. It might be a good idea to wire toggle switches up to the pins of those jumpers so they'll be easy to identify, can be labelled, and would be easier to work with than little jumpers in the middle of the motherboard. Change-Id: Ib2c3dc05077dacfbede596dae143ed81a99dbebd Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/965 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/mainboard/intel/emeraldlake2/acpi')
-rw-r--r--src/mainboard/intel/emeraldlake2/acpi/chromeos.asl6
1 files changed, 3 insertions, 3 deletions
diff --git a/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl b/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl
index 65202cb6d4..81ead2e554 100644
--- a/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl
+++ b/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl
@@ -65,9 +65,9 @@ Device (CRHW)
Method(GPIO, 0, Serialized)
{
Name(OIPG, Package() {
- Package() { 0x001, 0, 42, "CougarPoint" }, // recovery button
- Package() { 0x002, 1, 17, "CougarPoint" }, // developer switch
- Package() { 0x003, 1, 68, "CougarPoint" }, // firmware write protect
+ Package() { 0x001, 0, 22, "CougarPoint" }, // recovery button
+ Package() { 0x002, 1, 57, "CougarPoint" }, // developer switch
+ Package() { 0x003, 0, 48, "CougarPoint" }, // firmware write protect
Package() { 0x100, 0, 9, "CougarPoint" }, // debug header gpio
Package() { 0x101, 0, 10, "CougarPoint" }, // debug header gpio 1
Package() { 0x102, 0, 12, "CougarPoint" }, // debug header gpio 2