Revert "mainboard/intel/galileo: Add vboot support"

This reverts commit a50ced2eba20a007fa5b486c251c252ad09868cf.

Change-Id: I4f7d3177015bfe280111843014c310e0d333cb17
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18814
Tested-by: build bot (Jenkins)

1 files changed, 0 insertions, 111 deletions

diff --git a/src/mainboard/intel/galileo/vboot.c b/src/mainboard/intel/galileo/vboot.c
deleted file mode 100644
index cc8831eaeb..0000000000
--- a/src/mainboard/intel/galileo/vboot.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <assert.h>
-#include <bootmode.h>
-#include <console/console.h>
-#include <delay.h>
-#include <device/i2c.h>
-#include <lib.h>
-#include <soc/i2c.h>
-#include <soc/reg_access.h>
-#include "reg_access.h"
-#include "gen1.h"
-#include "gen2.h"
-#include <spi_flash.h>
-#include <vboot/vboot_common.h>
-
-int clear_recovery_mode_switch(void)
-{
-	/* Nothing to do */
-	return 0;
-}
-
-int get_developer_mode_switch(void)
-{
-	return 0;
-}
-
-int get_recovery_mode_switch(void)
-{
-	return 0;
-}
-
-int get_sw_write_protect_state(void)
-{
-	/* Not write protected */
-	return 0;
-}
-
-int get_write_protect_state(void)
-{
-	/* Not write protected */
-	return 0;
-}
-
-void log_recovery_mode_switch(void)
-{
-}
-
-void verstage_mainboard_init(void)
-{
-	const struct reg_script *script;
-
-	/* Crypto Shield I2C Addresses:
-	 *
-	 * 0x29: AT97S3204T - TPM 1.2
-	 * 0x50: ATAES132 - AES-128
-	 * 0x60: ATECC108 - Elliptical Curve
-	 * 0x64: ATSHA204 - SHA-256
-	 * 0x68: DS3231M - RTC
-	 */
-
-	/* Determine the correct script for the board */
-	if (IS_ENABLED(CONFIG_GALILEO_GEN2))
-		script = gen2_i2c_init;
-	else
-		/* Determine which I2C address is in use */
-		script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
-			& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
-			? gen1_i2c_0x20_init : gen1_i2c_0x21_init;
-
-	/* Direct the I2C SDA and SCL signals to the Arduino connector */
-	reg_script_run(script);
-}
-
-void __attribute__((weak)) vboot_platform_prepare_reboot(void)
-{
-	const struct reg_script *script;
-
-	/* Crypto Shield I2C Addresses:
-	 *
-	 * 0x29: AT97S3204T - TPM 1.2
-	 * 0x50: ATAES132 - AES-128
-	 * 0x60: ATECC108 - Elliptical Curve
-	 * 0x64: ATSHA204 - SHA-256
-	 * 0x68: DS3231M - RTC
-	 */
-
-	/* Determine the correct script for the board */
-	if (IS_ENABLED(CONFIG_GALILEO_GEN2))
-		script = gen2_tpm_reset;
-	else
-		/* Determine which I2C address is in use */
-		script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
-			& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
-			? gen1_tpm_reset_0x20 : gen1_tpm_reset_0x21;
-
-	/* Reset the TPM */
-	reg_script_run(script);
-}