eric patch

        1. x86_setup_mtrr take address bit.
        2. generic ht, pcix, pcie beidge...
        3. scan bus and reset_bus
        4. ht read ctrl to decide if the ht chain
           is ready
        5. Intel e7520 and e7525 support
        6. new ich5r support
        7. intel sb 6300 support.

yhlu patch
	1. split x86_setup_mtrrs to fixed and var
	2. if (resource->flags & IORESOURCE_FIXED ) return; in device.c pick_largest_resource
	3. in_conherent.c K8_SCAN_PCI_BUS


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 213 insertions, 0 deletions

diff --git a/src/mainboard/intel/jarrell/Config.lb b/src/mainboard/intel/jarrell/Config.lb
new file mode 100644
index 0000000000..adca342a78
--- /dev/null
+++ b/src/mainboard/intel/jarrell/Config.lb
@@ -0,0 +1,213 @@
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+	default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=131072
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+	depends "$(MAINBOARD)/failover.c ./romcc" 
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+	depends "$(MAINBOARD)/failover.c ./romcc"
+	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E 
+	depends	"$(MAINBOARD)/auto.c option_table.h ./romcc" 
+	action	"./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc 
+	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	action	"./romcc    -mcpu=p4 -fno-simplify-phi -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE 
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds 
+	mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+##
+## Include the secondary Configuration files 
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/E7520
+	device pci_domain 0 on 
+		device pci 00.0 on end
+		device pci 00.1 on end
+		device pci 01.0 on end
+		device pci 02.0 on 
+			chip southbridge/intel/pxhd # pxhd1
+				device pci 00.0 on end
+				device pci 00.1 on end
+				device pci 00.2 on
+					chip drivers/generic/generic
+						device pci 04.0 on end
+						device pci 04.1 on end
+					end
+				end
+				device pci 00.3 on end
+			end
+		end
+		device pci 06.0 on end
+		chip southbridge/intel/ich5r # ich5r
+			device pci 1d.0 on end
+			device pci 1d.1 on end
+			device pci 1d.2 on end
+			device pci 1d.3 off end
+			device pci 1d.7 on end
+			device pci 1e.0 on
+				chip drivers/ati/ragexl
+					device pci 0c.0 on end
+				end
+			end
+			device pci 1f.0 on 
+				chip superio/NSC/pc87427
+					device pnp 2e.0 off end
+					device pnp 2e.2 on
+#						 io 0x60 = 0x2f8
+#						irq 0x70 = 3
+						 io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 2e.3 on
+#						 io 0x60 = 0x3f8
+#						irq 0x70 = 4
+						 io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 2e.4 off end
+					device pnp 2e.5 off end
+					device pnp 2e.6 on
+						 io 0x60 = 0x60
+						 io 0x62 = 0x64
+						irq 0x70 = 1
+					end
+					device pnp 2e.7 off end
+					device pnp 2e.9 off end
+					device pnp 2e.a off end
+					device pnp 2e.f on end
+					device pnp 2e.10 off end
+					device pnp 2e.14 off end
+				end
+			end
+			device pci 1f.1 on end
+			device pci 1f.2 off end
+			device pci 1f.3 on end 
+			device pci 1f.5 off end
+			device pci 1f.6 off end
+			register "gpio[40]" = "ICH5R_GPIO_USE_AS_GPIO"
+			register "gpio[48]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_OUTPUT | ICH5R_GPIO_LVL_LOW"
+			register "gpio[41]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_INPUT"
+		end
+	end
+	device apic_cluster 0 on
+		chip cpu/intel/socket_mPGA604_800Mhz # cpu 0
+			device apic 0 on end
+		end
+		chip cpu/intel/socket_mPGA604_800Mhz # cpu 1
+			device apic 6 on end
+		end
+	end
+end