mb/intel/jasperlake_rvp: Add initial mainboard code

This is a initial mainboard code aimed to serve as base for
further mainboard check-ins.

This is a copy patch from icelake_rvp as on commit ID:
I64db2460115f5fb35ca197b83440f8ee47470761

Below are the changes done over the copy patch:

 1. Rename "Icelake" with "Jasperlake".
 2. Replace "icelake_rvp" with "jasperlake_rvp".
 3. Rename "icl" with "jsl".
 4. Remove unwanted SPD file, add empty SPD as
    placeholder.
 5. Replace "soc/intel/icelake" with "soc/intel/tigerlake"
    as tigerlake SOC hosts jasperlake code as well.
 6. Empty romstage_fsp_params.c, to fill it later with
    SOC specific config.
 7. Empty GPIO configuration, to be filled as per board.
 8. Change copyright year to 2019.
 9. Add two board support namely BOARD_INTEL_JASPERLAKE_RVP
    and BOARD_INTEL_JASPERLAKE_RVP_EXT_EC
 10. Replace icl_u and icl_y variant with jslrvp variant.
 11. Remove basebord gpio.c and rely on variant override.
 12. Remove HDA verb table and config support.

Changes to follow on top of this:
 1. Add correct memory parameters, add SPDs.
 2. Clean up devicetree as per jasperlake SOC.
 3. Add GPIO support.
 4. Update chromeos.fmd to make 10MB BIOS region.

TEST=Build jasperlake rvp board

Change-Id: I3314215807959b7348b71933fbba98e6487c0632
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>

1 files changed, 337 insertions, 0 deletions

diff --git a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb
new file mode 100644
index 0000000000..76ceb3046d
--- /dev/null
+++ b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb
@@ -0,0 +1,337 @@
+chip soc/intel/tigerlake
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route. i.e. If this route changes then the affected GPE
+	# offset bits also need to be changed.
+	register "gpe0_dw0" = "GPP_B"
+	register "gpe0_dw1" = "GPP_D"
+	register "gpe0_dw2" = "GPP_E"
+
+	# FSP configuration
+	register "SaGv" = "SaGv_Enabled"
+	register "SmbusEnable" = "1"
+	register "ScsEmmcHs400Enabled" = "1"
+	register "SdCardPowerEnableActiveHigh" = "1"
+
+	register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"	# USB3/2 Type A port1
+	register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 WWAN
+	register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 Bluetooth
+	register "usb2_ports[3]" = "USB2_PORT_MID(OC0)"	# Type-C Port1
+	register "usb2_ports[4]" = "USB2_PORT_MID(OC0)"	# Type-C Port2
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC3)"	# Type-C Port3
+	register "usb2_ports[6]" = "USB2_PORT_MID(OC3)"	# Type-C Port4
+	register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"	# USB3/2 Type A port2
+	register "usb2_ports[8]" = "USB2_PORT_MID(OC3)"	# USB2 Type A port1
+	register "usb2_ports[9]" = "USB2_PORT_MID(OC3)"	# USB2 Type A port2
+
+	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"	# USB3/2 Type A port1
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"	# USB3/2 Type A port2
+	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB3 WLAN
+	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# UNUSED
+	register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# UNUSED
+	register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# UNUSED
+
+	# Enable Pch iSCLK
+	register "pch_isclk" = "1"
+
+	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+	register "gen1_dec" = "0x00fc0801"
+	register "gen2_dec" = "0x000c0201"
+	# EC memory map range is 0x900-0x9ff
+	register "gen3_dec" = "0x00fc0901"
+
+	register "PchHdaDspEnable" = "1"
+	register "PchHdaAudioLinkHda" = "1"
+
+	register "PcieRpEnable[0]" = "1"
+	register "PcieRpEnable[1]" = "0"
+	register "PcieRpEnable[2]" = "0"
+	register "PcieRpEnable[3]" = "0"
+	register "PcieRpEnable[4]" = "1"
+	register "PcieRpEnable[5]" = "0"
+	register "PcieRpEnable[6]" = "0"
+	register "PcieRpEnable[7]" = "0"
+	register "PcieRpEnable[8]" = "1"
+	register "PcieRpEnable[9]" = "0"
+	register "PcieRpEnable[10]" = "0"
+	register "PcieRpEnable[11]" = "0"
+	register "PcieRpEnable[12]" = "0"
+	register "PcieRpEnable[13]" = "0"
+	register "PcieRpEnable[14]" = "0"
+	register "PcieRpEnable[15]" = "0"
+
+	register "PcieClkSrcUsage[0]" = "2"
+	register "PcieClkSrcUsage[1]" = "8"
+	register "PcieClkSrcUsage[2]" = "0xC"
+	register "PcieClkSrcUsage[3]" = "0x70"
+	register "PcieClkSrcUsage[4]" = "4"
+	register "PcieClkSrcUsage[5]" = "0xE"
+	register "PcieClkSrcUsage[6]" = "0x80"
+	register "PcieClkSrcUsage[7]" = "0x80"
+	register "PcieClkSrcUsage[8]" = "0x80"
+	register "PcieClkSrcUsage[9]" = "0x80"
+	register "PcieClkSrcUsage[10]" = "0x80"
+	register "PcieClkSrcUsage[11]" = "0x80"
+	register "PcieClkSrcUsage[12]" = "0x80"
+	register "PcieClkSrcUsage[13]" = "0x80"
+	register "PcieClkSrcUsage[14]" = "0x80"
+	register "PcieClkSrcUsage[15]" = "0x80"
+
+	register "PcieClkSrcClkReq[0]" = "0"
+	register "PcieClkSrcClkReq[1]" = "1"
+	register "PcieClkSrcClkReq[2]" = "2"
+	register "PcieClkSrcClkReq[3]" = "3"
+	register "PcieClkSrcClkReq[4]" = "4"
+	register "PcieClkSrcClkReq[5]" = "5"
+	register "PcieClkSrcClkReq[6]" = "6"
+	register "PcieClkSrcClkReq[7]" = "7"
+	register "PcieClkSrcClkReq[8]" = "8"
+	register "PcieClkSrcClkReq[9]" = "9"
+	register "PcieClkSrcClkReq[10]" = "10"
+	register "PcieClkSrcClkReq[11]" = "11"
+	register "PcieClkSrcClkReq[12]" = "12"
+	register "PcieClkSrcClkReq[13]" = "13"
+	register "PcieClkSrcClkReq[14]" = "14"
+	register "PcieClkSrcClkReq[15]" = "15"
+
+	register "SataEnable" = "1"
+	register "SataSalpSupport" = "1"
+	register "SataPortsEnable[0]" = "1"
+	register "SataPortsEnable[1]" = "1"
+	register "SataPortsEnable[2]" = "1"
+	register "SataPortsEnable[3]" = "1"
+	register "SataPortsEnable[4]" = "1"
+	register "SataPortsEnable[5]" = "1"
+	register "SataPortsEnable[6]" = "1"
+	register "SataPortsEnable[7]" = "1"
+
+	register "SataPortsDevSlp[0]" = "1"
+	register "SataPortsDevSlp[1]" = "1"
+	register "SataPortsDevSlp[2]" = "1"
+	register "SataPortsDevSlp[3]" = "1"
+	register "SataPortsDevSlp[4]" = "1"
+	register "SataPortsDevSlp[5]" = "1"
+	register "SataPortsDevSlp[6]" = "1"
+	register "SataPortsDevSlp[7]" = "1"
+
+	register "SerialIoI2cMode" = "{
+		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
+	}"
+
+	register "SerialIoGSpiMode" = "{
+		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+		[PchSerialIoIndexGSPI1] = PchSerialIoPci,
+		[PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+	}"
+
+	register "SerialIoGSpiCsMode" = "{
+		[PchSerialIoIndexGSPI0] = 1,
+		[PchSerialIoIndexGSPI1] = 1,
+		[PchSerialIoIndexGSPI2] = 1,
+	}"
+
+	register "SerialIoGSpiCsState" = "{
+		[PchSerialIoIndexGSPI0] = 0,
+		[PchSerialIoIndexGSPI1] = 0,
+		[PchSerialIoIndexGSPI2] = 0,
+	}"
+
+	register "SerialIoUartMode" = "{
+		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
+		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
+		[PchSerialIoIndexUART2] = PchSerialIoSkipInit,
+	}"
+
+	# Enable "Intel Speed Shift Technology"
+	register "speed_shift_enable" = "1"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# GPIO for SD card detect
+	register "sdcard_cd_gpio" = "GPP_G5"
+
+	# Enable S0ix
+	register "s0ix_enable" = "0"
+
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		.gspi[1] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+	}"
+
+	device domain 0 on
+		device pci 00.0 on  end # Host Bridge
+		device pci 02.0 on  end # Integrated Graphics Device
+		device pci 04.0 off  end # SA Thermal device
+		device pci 12.0 off  end # Thermal Subsystem
+		device pci 12.5 off end # UFS SCS
+		device pci 12.6 off end # GSPI #2
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				register "desc" = ""Root Hub""
+				register "type" = "UPC_TYPE_HUB"
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3/2 Type-A Left Lower""
+						register "type" = "UPC_TYPE_A"
+						device usb 2.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB C Connector 1""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						device usb 2.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB C Connector 2""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						device usb 2.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB C Connector 3""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB C Connector 4""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						device usb 2.6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3/2 Type-A Left Upper""
+						register "type" = "UPC_TYPE_A"
+						device usb 2.7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Right Lower""
+						register "type" = "UPC_TYPE_A"
+						device usb 2.8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Right Upper""
+						register "type" = "UPC_TYPE_A"
+						device usb 2.9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3/2 Type-A Left Lower""
+						register "type" = "UPC_TYPE_A"
+						device usb 3.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3/2 Type-A Left Upper""
+						register "type" = "UPC_TYPE_A"
+						device usb 3.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""WLAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Port Unused1""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Port Unused2""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Port Unused3""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.5 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 14.1 off end # USB xDCI (OTG)
+		device pci 14.2 off end # PMC SRAM
+		chip drivers/intel/wifi
+			register "wake" = "GPE0_PME_B0"
+			device pci 14.3 on  end # CNVi wifi
+		end
+		device pci 14.5 on  end # SDCard
+		device pci 15.0 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ALPS0000""
+				register "generic.desc" = ""Touchpad""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 2c on end
+			end
+		end # I2C 0
+		device pci 15.1 on end # I2C #1
+		device pci 15.2 on end # I2C #2
+		device pci 15.3 on end # I2C #3
+		device pci 16.0 on  end # Management Engine Interface 1
+		device pci 16.1 off end # Management Engine Interface 2
+		device pci 16.2 off end # Management Engine IDE-R
+		device pci 16.3 off end # Management Engine KT Redirection
+		device pci 16.4 off end # Management Engine Interface 3
+		device pci 16.5 off end # Management Engine Interface 4
+		device pci 17.0 on  end # SATA
+		device pci 19.0 on  end # I2C #4
+		device pci 19.1 off end # I2C #5
+		device pci 19.2 on  end # UART #2
+		device pci 1a.0 on  end # eMMC
+		device pci 1c.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_PCI_EXP"
+				device pci 00.0 on end
+			end
+		end # PCI Express Port 1 x4 SLOT1
+		device pci 1c.4 on  end # PCI Express Port 5 x1 SLOT2/LAN
+		device pci 1c.5 off end # PCI Express Port 6
+		device pci 1c.6 off end # PCI Express Port 7
+		device pci 1c.7 off end # PCI Express Port 8
+		device pci 1d.0 on  end # PCI Express Port 9
+		device pci 1d.1 off end # PCI Express Port 10
+		device pci 1d.2 off end # PCI Express Port 11
+		device pci 1d.3 off end # PCI Express Port 12
+		device pci 1d.4 off end # PCI Express Port 13
+		device pci 1d.5 off end # PCI Express Port 14
+		device pci 1d.6 off end # PCI Express Port 15
+		device pci 1d.7 off end # PCI Express Port 16
+		device pci 1e.0 on  end # UART #0
+		device pci 1e.1 off end # UART #1
+		device pci 1e.2 off end # GSPI #0
+		device pci 1e.3 on
+			chip drivers/spi/acpi
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "compat_string" = ""google,cr50""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+				device spi 0 on end
+			end
+		end # GSPI #1
+		device pci 1f.0 on end # eSPI Interface
+		device pci 1f.1 on  end # P2SB
+		device pci 1f.2 on  end # Power Management Controller
+		device pci 1f.3 on  end # Intel HDA
+		device pci 1f.4 on  end # SMBus
+		device pci 1f.5 on  end # PCH SPI
+		device pci 1f.6 off end # GbE
+	end
+end