mb/intel/kblrvp: Enable overridetree support for variants

This patch add devicetree.cb in baseboard and overridetree.cb
for RVP3, RVP7 and RVP8 variants.

BUG= None
TEST= build with BUILD_TIMELESS=1, static.c remains same on before &
       after enabling overridetree.

Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Change-Id: Ib7d492e2a92aed10ad0426d57640d0ed56733847
Reviewed-on: https://review.coreboot.org/c/30623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

1 files changed, 0 insertions, 88 deletions

diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb
index efcf9be3b8..abd9886d17 100644
--- a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb
+++ b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb
@@ -9,63 +9,14 @@ chip soc/intel/skylake
 	# Enable deep Sx states
 	register "deep_s5_enable_ac" = "1"
 	register "deep_s5_enable_dc" = "1"
-	register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
-	# GPE configuration
-	# Note that GPE events called out in ASL code rely on this
-	# route. i.e. If this route changes then the affected GPE
-	# offset bits also need to be changed.
-	register "gpe0_dw0" = "GPP_B"
-	register "gpe0_dw1" = "GPP_D"
-	register "gpe0_dw2" = "GPP_E"
 
 	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
 	register "gen2_dec" = "0x000c0201"
 
-	# Enable "Intel Speed Shift Technology"
-	register "speed_shift_enable" = "1"
-
-	# Enable DPTF
-	register "dptf_enable" = "1"
-
 	# FSP Configuration
-	register "SmbusEnable" = "1"
-	register "ScsEmmcEnabled" = "1"
-	register "ScsEmmcHs400Enabled" = "1"
-	register "ScsSdCardEnabled" = "2"
-	register "InternalGfx" = "1"
-	register "SkipExtGfxScan" = "1"
-	register "Device4Enable" = "1"
 	register "HeciEnabled" = "0"
-	register "SaGv" = "3"
 	register "PmTimerDisabled" = "1"
 
-	register "pirqa_routing" = "PCH_IRQ11"
-	register "pirqb_routing" = "PCH_IRQ10"
-	register "pirqc_routing" = "PCH_IRQ11"
-	register "pirqd_routing" = "PCH_IRQ11"
-	register "pirqe_routing" = "PCH_IRQ11"
-	register "pirqf_routing" = "PCH_IRQ11"
-	register "pirqg_routing" = "PCH_IRQ11"
-	register "pirqh_routing" = "PCH_IRQ11"
-
-	# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
-	# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
-	register "PmConfigSlpS3MinAssert" = "0x02"
-
-	# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
-	register "PmConfigSlpS4MinAssert" = "0x04"
-
-	# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
-	register "PmConfigSlpSusMinAssert" = "0x03"
-
-	# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
-	register "PmConfigSlpAMinAssert" = "0x03"
-
-	# Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled
-	register "SerialIrqConfigSirqEnable" = "0x01"
-
 	# VR Settings Configuration for 4 Domains
 	#+----------------+-------+-------+-------+-------+
 	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
@@ -199,11 +150,7 @@ chip soc/intel/skylake
 		[PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
 	}"
 
-	# Send an extra VR mailbox command for the PS4 exit issue
-	register "SendVrMbxCmd" = "2"
 
-	# Enable/Disable VMX feature
-	register "VmxEnable" = "0"
 
 	# Use default SD card detect GPIO configuration
 	register "sdcard_cd_gpio_default" = "GPP_G5"
@@ -217,53 +164,18 @@ chip soc/intel/skylake
 		device lapic 0 on end
 	end
 	device domain 0 on
-		device pci 00.0 on  end # Host Bridge
-		device pci 02.0 on  end # Integrated Graphics Device
-		device pci 14.0 on  end # USB xHCI
-		device pci 14.1 off end # USB xDCI (OTG)
-		device pci 14.2 on  end # Thermal Subsystem
-		device pci 15.0 on  end # I2C #0
-		device pci 15.1 on  end # I2C #1
 		device pci 15.2 off end # I2C #2
 		device pci 15.3 off end # I2C #3
-		device pci 16.0 on  end # Management Engine Interface 1
-		device pci 16.1 off end # Management Engine Interface 2
-		device pci 16.2 off end # Management Engine IDE-R
-		device pci 16.3 off end # Management Engine KT Redirection
-		device pci 16.4 off end # Management Engine Interface 3
 		device pci 17.0 on  end # SATA
-		device pci 19.0 on  end # UART #2
 		device pci 19.1 off end # I2C #5
-		device pci 19.2 on  end #
-		device pci 1c.0 on  end # PCI Express Port 1
-		device pci 1c.1 off end # PCI Express Port 2
 		device pci 1c.2 on  end # PCI Express Port 3
 		device pci 1c.3 on  end # PCI Express Port 4
 		device pci 1c.4 on  end # PCI Express Port 5
 		device pci 1c.5 on  end # PCI Express Port 6
-		device pci 1c.6 off end # PCI Express Port 7
-		device pci 1c.7 off end # PCI Express Port 8
-		device pci 1d.0 on  end # PCI Express Port 9
-		device pci 1d.1 off end # PCI Express Port 10
-		device pci 1d.2 off end # PCI Express Port 11
-		device pci 1d.3 off end # PCI Express Port 12
-		device pci 1e.0 on  end # UART #0
-		device pci 1e.1 off end # UART #1
-		device pci 1e.2 off end # GSPI #0
-		device pci 1e.3 off end # GSPI #1
-		device pci 1e.4 on  end # eMMC
-		device pci 1e.5 off end # SDIO
-		device pci 1e.6 on  end # SDCard
 		device pci 1f.0 on
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end
 		end # LPC Interface
-		device pci 1f.1 on  end # P2SB
-		device pci 1f.2 on  end # Power Management Controller
-		device pci 1f.3 on  end # Intel HDA
-		device pci 1f.4 on  end # SMBus
-		device pci 1f.5 on  end # PCH SPI
-		device pci 1f.6 off end # GbE
 	end
 end