This patch implements support for the Intel 3100 Development Kit

mainboard, aka "Mt. Arvon".   

Signed-off-by: Ed Swierk <eswierk@arastra.com>                                                                                                                                               
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 190 insertions, 0 deletions

diff --git a/src/mainboard/intel/mtarvon/Config.lb b/src/mainboard/intel/mtarvon/Config.lb
new file mode 100644
index 0000000000..f91ab8e53d
--- /dev/null
+++ b/src/mainboard/intel/mtarvon/Config.lb
@@ -0,0 +1,190 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Arastra, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License version 2 as
+## published by the Free Software Foundation.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+##
+## Compute the location and size of where this firmware image
+## (coreboot plus bootloader) will live in the boot ROM chip
+##
+if USE_FALLBACK_IMAGE
+        default ROM_SECTION_SIZE = FALLBACK_SIZE
+        default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+        default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+        default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of the coreboot bootloader
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of coreboot will start in the boot ROM
+##
+default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up coreboot,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=131072
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+
+##
+## Romcc output
+##
+makerule ./failover.E
+        depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+        action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+
+makerule ./failover.inc
+        depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+        action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+
+makerule ./auto.E
+        depends "$(MAINBOARD)/auto.c ./romcc"
+        action "./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+        depends "$(MAINBOARD)/auto.c ./romcc"
+        action "./romcc -mcpu=p4 -fno-simplify-phi -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if USE_FALLBACK_IMAGE
+        mainboardinit cpu/x86/16bit/reset16.inc
+        ldscript /cpu/x86/16bit/reset16.lds
+else
+        mainboardinit cpu/x86/32bit/reset32.inc
+        ldscript /cpu/x86/32bit/reset32.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+        ldscript /arch/i386/lib/failover.lds
+        mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i3100
+        device pci_domain 0 on
+                device pci 00.0 on end # IMCH
+                device pci 00.1 on end # IMCH error status
+                device pci 01.0 on end # IMCH EDMA engine
+                device pci 02.0 on end # PCIe port A/A0
+                device pci 03.0 on end # PCIe port A1
+                chip southbridge/intel/i3100
+                        # PIRQ line -> legacy IRQ mappings
+                        register "pirq_a_d" = "0x0b070a05"
+                        register "pirq_e_h" = "0x0a808080"
+
+                        device pci 1c.0 on end # PCIe port B0
+                        device pci 1c.1 on end # PCIe port B1
+                        device pci 1c.2 on end # PCIe port B2
+                        device pci 1c.3 on end # PCIe port B3
+                        device pci 1d.0 on end # USB (UHCI) 1
+                        device pci 1d.1 on end # USB (UHCI) 2
+                        device pci 1d.7 on end # USB (EHCI)
+                        device pci 1e.0 on end # PCI bridge
+                        device pci 1e.2 on end # audio
+                        device pci 1e.3 on end # modem
+                        device pci 1f.0 on     # LPC bridge
+                                chip superio/intel/i3100
+                                        device pnp 4e.4 on # Com1
+                                                 io 0x60 = 0x3f8
+                                                irq 0x70 = 4
+                                        end
+                                        device pnp 4e.5 on # Com2
+                                                 io 0x60 = 0x2f8
+                                                irq 0x70 = 3
+                                        end
+                                end
+                        end
+                        device pci 1f.2 on end # SATA
+                        device pci 1f.3 on end # SMBus
+                end
+        end
+        device apic_cluster 0 on
+                chip cpu/intel/socket_mPGA479M
+                        device apic 0 on end
+                end
+        end
+end