summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/wtm2
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2013-03-08 17:00:37 -0800
committerRonald G. Minnich <rminnich@gmail.com>2013-03-21 23:11:25 +0100
commit467f31de92ca2ed9df1530270e9aabdd69fe8f88 (patch)
tree61092ad464c81d2f69cc66fc27e2db1ccb2df710 /src/mainboard/intel/wtm2
parent7922b468b51eea58c7238f11b21820b8d3747d6b (diff)
downloadcoreboot-467f31de92ca2ed9df1530270e9aabdd69fe8f88.tar.xz
haswell/lynxpoint: Use new PCH/PM helper functions
This makes use of the new functions from pmutil.c that take care of the differences between -H and -LP chipsets. It also adds support for the LynxPoint-LP GPE0 register block and the SMI/SCI routing differences. The FADT is updated to report the new 256 byte GPE0 block on wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address block so that part is zeroed to prevent IASL and the kernel from complaining about a mismatch. This was tested on WTM2. Unfortunately I am still unable to get an SCI delivered from the EC but I suspect that is due to a magic command needed to put the EC in ACPI mode. Instead I verified that all of the power management and GPIO registers were set to expected values. I also tested transitions into S3 and S5 from both the kernel and by pressing the power button at the developer mode screen and they all function as expected. Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2816 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/mainboard/intel/wtm2')
-rw-r--r--src/mainboard/intel/wtm2/devicetree.cb9
-rw-r--r--src/mainboard/intel/wtm2/fadt.c14
2 files changed, 11 insertions, 12 deletions
diff --git a/src/mainboard/intel/wtm2/devicetree.cb b/src/mainboard/intel/wtm2/devicetree.cb
index db7c9988c7..80c86273d8 100644
--- a/src/mainboard/intel/wtm2/devicetree.cb
+++ b/src/mainboard/intel/wtm2/devicetree.cb
@@ -41,12 +41,11 @@ chip northbridge/intel/haswell
register "pirqg_routing" = "0x80"
register "pirqh_routing" = "0x80"
- # GPI routing
- # 0 No effect (default)
- # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- # 2 SCI (if corresponding GPIO_EN bit is also set)
register "alt_gp_smi_en" = "0x0000"
- register "gpe0_en" = "0x0000"
+ register "gpe0_en_1" = "0x00000400"
+ register "gpe0_en_2" = "0x00000000"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
register "ide_legacy_combined" = "0x0"
register "sata_ahci" = "0x1"
diff --git a/src/mainboard/intel/wtm2/fadt.c b/src/mainboard/intel/wtm2/fadt.c
index 510b765e96..7afbbfa698 100644
--- a/src/mainboard/intel/wtm2/fadt.c
+++ b/src/mainboard/intel/wtm2/fadt.c
@@ -21,12 +21,12 @@
#include <device/pci.h>
#include <arch/acpi.h>
#include <cpu/x86/smm.h>
+#include <southbridge/intel/lynxpoint/pch.h>
void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
{
acpi_header_t *header = &(fadt->header);
- u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)),
- 0x40) & 0xfffe;
+ u16 pmbase = get_pmbase();
memset((void *) fadt, 0, sizeof(acpi_fadt_t));
memcpy(header->signature, "FACP", 4);
@@ -55,14 +55,14 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->pm1b_cnt_blk = 0x0;
fadt->pm2_cnt_blk = pmbase + 0x50;
fadt->pm_tmr_blk = pmbase + 0x8;
- fadt->gpe0_blk = pmbase + 0x20;
+ fadt->gpe0_blk = pmbase + 0x80;
fadt->gpe1_blk = 0;
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
fadt->pm2_cnt_len = 1;
fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 16;
+ fadt->gpe0_blk_len = 32;
fadt->gpe1_blk_len = 0;
fadt->gpe1_base = 0;
fadt->cst_cnt = 0;
@@ -137,11 +137,11 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
fadt->x_pm_tmr_blk.addrh = 0x0;
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.space_id = 0;
+ fadt->x_gpe0_blk.bit_width = 0;
fadt->x_gpe0_blk.bit_offset = 0;
fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = pmbase + 0x20;
+ fadt->x_gpe0_blk.addrl = 0;
fadt->x_gpe0_blk.addrh = 0x0;
fadt->x_gpe1_blk.space_id = 1;