summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
diff options
context:
space:
mode:
authorNaresh G Solanki <naresh.solanki@intel.com>2016-11-06 13:37:34 +0530
committerMartin Roth <martinroth@google.com>2016-11-08 22:47:40 +0100
commit647d39f2c72c9f6565fd6f8b4d2ed1c316ea8cd2 (patch)
tree952b4d46adb4fc2278346dcb8f7e6bf129ffe353 /src/mainboard/intel
parentf338fa1f315086324797b1c864d6d33654f4eabc (diff)
downloadcoreboot-647d39f2c72c9f6565fd6f8b4d2ed1c316ea8cd2.tar.xz
intel/kblrvp: Update mainboard configuration
Update devicetree.cb as per RVP3 mainboard. * Enable & configure PCIE ports, * Enable & configure USB ports, * Enable SSIC for WWAN, * Disable unused I2C ports, * Disable deep S5, * Disable HDA, * Update VR config, Updated gpio.h to disable pull down for SoC power button. Change-Id: I235a1d44dabef16ded2aaad13aef36ca57f37c8e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17247 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/mainboard/intel')
-rw-r--r--src/mainboard/intel/kblrvp/devicetree.cb174
-rw-r--r--src/mainboard/intel/kblrvp/gpio.h4
2 files changed, 60 insertions, 118 deletions
diff --git a/src/mainboard/intel/kblrvp/devicetree.cb b/src/mainboard/intel/kblrvp/devicetree.cb
index 8dded98470..104a454963 100644
--- a/src/mainboard/intel/kblrvp/devicetree.cb
+++ b/src/mainboard/intel/kblrvp/devicetree.cb
@@ -1,14 +1,14 @@
chip soc/intel/skylake
# Enable deep Sx states
- register "deep_s5_enable" = "1"
+ register "deep_s5_enable" = "0"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
+ register "gpe0_dw0" = "GPP_C"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
@@ -23,9 +23,6 @@ chip soc/intel/skylake
register "dptf_enable" = "1"
# FSP Configuration
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
register "SmbusEnable" = "1"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
@@ -67,7 +64,7 @@ chip soc/intel/skylake
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
#+----------------+-------+-------+-------------+-------------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
- #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
+ #| Psi2Threshold | 5A | 5A | 5A | 5A | 5A |
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
@@ -79,7 +76,7 @@ chip soc/intel/skylake
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1, \
.psi1threshold = 0x50, \
- .psi2threshold = 0x10, \
+ .psi2threshold = 0x14, \
.psi3threshold = 0x4, \
.psi3enable = 1, \
.psi4enable = 1, \
@@ -142,29 +139,56 @@ chip soc/intel/skylake
register "FspSkipMpInit" = "1"
- # Enable Root port 1 and 5.
+ # Enable Root ports.
+ # PCIE Port 1 x4 -> SLOT1
register "PcieRpEnable[0]" = "1"
- register "PcieRpEnable[4]" = "1"
- # Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
+ register "PcieRpClkReqNumber[0]" = "2"
+
+ # PCIE Port 5 x1 -> SLOT2/LAN
+ register "PcieRpEnable[4]" = "1"
register "PcieRpClkReqSupport[4]" = "1"
- # RP 1 uses SRCCLKREQ1# while RP 5 uses SRCCLKREQ2#
- register "PcieRpClkReqNumber[0]" = "1"
- register "PcieRpClkReqNumber[4]" = "2"
+ register "PcieRpClkReqNumber[4]" = "3"
+
+ # PCIE Port 6 x1 -> SLOT3
+ register "PcieRpEnable[5]" = "1"
+ register "PcieRpClkReqSupport[5]" = "1"
+ register "PcieRpClkReqNumber[5]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C" # Type-C Port 1
- register "usb2_ports[1]" = "USB2_PORT_TYPE_C" # Type-C Port 2
- register "usb2_ports[2]" = "USB2_PORT_MID" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID" # Type-A Port (card)
- register "usb2_ports[6]" = "USB2_PORT_FLEX" # Camera
- register "usb2_ports[8]" = "USB2_PORT_LONG" # Type-A Port (board)
+ # PCIE Port 7 Disabled
+ # PCIE Port 8 Disabled
+ # PCIE Port 9 x1 -> WLAN
+ register "PcieRpEnable[8]" = "1"
+ register "PcieRpClkReqSupport[8]" = "1"
+ register "PcieRpClkReqNumber[8]" = "5"
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT" # Type-C Port 1
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT" # Type-C Port 2
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT" # Type-A Port (card)
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT" # Type-A Port (board)
+ # PCIE Port 10 x1 -> WiGig
+ register "PcieRpEnable[9]" = "1"
+ register "PcieRpClkReqSupport[9]" = "1"
+ register "PcieRpClkReqNumber[9]" = "4"
- register "i2c[4].voltage" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
+ # USB 2.0 Enable all ports
+ register "usb2_ports[0]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[1]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[2]" = "USB2_PORT_MAX" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MAX" # Type-A Port
+ register "usb2_ports[5]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[6]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[7]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[8]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[9]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[10]" = "USB2_PORT_MAX" # TYPE-A Port
+ register "usb2_ports[11]" = "USB2_PORT_MAX" # TYPE-A Port
+
+ # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT" # TYPE-A Port
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT" # TYPE-A Port
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT" # TYPE-A Port
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT" # TYPE-A Port
+ register "usb3_ports[4]" = "USB3_PORT_EMPTY" # Disabled
+ register "usb3_ports[5]" = "USB3_PORT_EMPTY" # Disabled
+
+ register "SsicPortEnable" = "1" # Enable SSIC for WWAN
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{ \
@@ -181,18 +205,12 @@ chip soc/intel/skylake
[PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
}"
- # PL2 override 25W
- register "tdp_pl2_override" = "25"
-
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
# Enable/Disable VMX feature
register "VmxEnable" = "0"
- # Use default SD card detect GPIO configuration
- register "sdcard_cd_gpio_default" = "GPP_A7"
-
device cpu_cluster 0 on
device lapic 0 on end
end
@@ -202,23 +220,8 @@ chip soc/intel/skylake
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 10 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
+ device pci 15.0 on end # I2C #0
+ device pci 15.1 on end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
@@ -229,61 +232,14 @@ chip soc/intel/skylake
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "1"
- register "jkdet_pull_up" = "1"
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x08"
- register "sar_threshold[1]" = "0x12"
- register "sar_threshold[2]" = "0x26"
- register "sar_threshold[3]" = "0x73"
- register "sar_hysteresis" = "0"
- register "sar_voltage" = "6"
- register "sar_compare_time" = "1" # 1us
- register "sar_sampling_time" = "1" # 4us
- register "short_key_debounce" = "3" # 30ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "0"
- device i2c 1a on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Left Speaker Amp""
- register "uid" = "0"
- register "device_present_gpio" = "GPP_E3"
- device i2c 34 on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Right Speaker Amp""
- register "uid" = "1"
- register "device_present_gpio" = "GPP_E3"
- device i2c 35 on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 on end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
+ device pci 19.2 on end
+ device pci 1c.0 on end # PCI Express Port 1 x4 SLOT1
+ device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN
+ device pci 1c.5 on end # PCI Express Port 6 x1 SLOT3
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
+ device pci 1d.0 on end # PCI Express Port 9 x1 WLAN
+ device pci 1d.1 on end # PCI Express Port 10 x1 WIGIG
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
@@ -291,24 +247,10 @@ chip soc/intel/skylake
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 on end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
+ device pci 1f.0 on end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on
- chip drivers/generic/max98357a
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
- register "device_present_gpio" = "GPP_E3"
- register "device_present_gpio_invert" = "1"
- device generic 0 on end
- end
- end # Intel HDA
+ device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
diff --git a/src/mainboard/intel/kblrvp/gpio.h b/src/mainboard/intel/kblrvp/gpio.h
index f8ee994b8f..5e251d846c 100644
--- a/src/mainboard/intel/kblrvp/gpio.h
+++ b/src/mainboard/intel/kblrvp/gpio.h
@@ -185,7 +185,7 @@ static const struct pad_config gpio_table[] = {
/* PCH_BATLOW */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
/* AC_PRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1),
/* PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1),
-/* PCH_PWRBTN */ PAD_CFG_NF(GPD3, 20K_PD, DEEP, NF1),
+/* PCH_PWRBTN */ PAD_CFG_NF(GPD3, NONE, DEEP, NF1),
/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
@@ -204,4 +204,4 @@ static const struct pad_config early_gpio_table[] = {
#endif
-#endif \ No newline at end of file
+#endif