This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 78 insertions, 78 deletions

diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb
index d91f602534..530c43ea78 100644
--- a/src/mainboard/lippert/roadrunner-lx/Options.lb
+++ b/src/mainboard/lippert/roadrunner-lx/Options.lb
@@ -20,69 +20,69 @@
 
 ## Based on Options.lb from AMD's DB800 mainboard.
 
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses HAVE_OPTION_TABLE
-uses USE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
 uses CONFIG_IDE
 uses CONFIG_FS_PAYLOAD
 uses CONFIG_FS_EXT2
-uses AUTOBOOT_DELAY
-uses AUTOBOOT_CMDLINE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
+uses CONFIG_AUTOBOOT_DELAY
+uses CONFIG_AUTOBOOT_CMDLINE
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
 uses COREBOOT_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_ARCH
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESS
 uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_MP_TABLE
-uses CROSS_COMPILE
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_RAMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_HAVE_MP_TABLE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
-uses DEBUG
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
+uses CONFIG_DEBUG
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
 uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
 uses CONFIG_UDELAY_TSC
 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
 uses CONFIG_VIDEO_MB
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
 uses CONFIG_USE_PRINTK_IN_CAR
-uses PIRQ_ROUTE
+uses CONFIG_PIRQ_ROUTE
 
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE = 512 * 1024
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+default CONFIG_ROM_SIZE = 512 * 1024
 
 ###
 ### Build options
@@ -94,17 +94,17 @@ default CONFIG_PCI_ROM_RUN = 0
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT = 1
+default CONFIG_HAVE_FALLBACK_BOOT = 1
 
 ##
 ## no MP table
 ##
-default HAVE_MP_TABLE = 0
+default CONFIG_HAVE_MP_TABLE = 0
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET = 0
+default CONFIG_HAVE_HARD_RESET = 0
 
 ## Delay timer options
 ##
@@ -114,57 +114,57 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE = 1
-default IRQ_SLOT_COUNT = 7
-default PIRQ_ROUTE = 1
+default CONFIG_HAVE_PIRQ_TABLE = 1
+default CONFIG_IRQ_SLOT_COUNT = 7
+default CONFIG_PIRQ_ROUTE = 1
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE = 0
+default CONFIG_HAVE_OPTION_TABLE = 0
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 64 * 1024
-default FALLBACK_SIZE = 128 * 1024
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
+default CONFIG_FALLBACK_SIZE = 128 * 1024
 
 ##
 ## enable CACHE_AS_RAM specifics
 ##
-default USE_DCACHE_RAM = 1
-default DCACHE_RAM_BASE = 0xc8000
-default DCACHE_RAM_SIZE = 0x08000
+default CONFIG_USE_DCACHE_RAM = 1
+default CONFIG_DCACHE_RAM_BASE = 0xc8000
+default CONFIG_DCACHE_RAM_SIZE = 0x08000
 default CONFIG_USE_PRINTK_IN_CAR=1
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE = 8 * 1024
+default CONFIG_STACK_SIZE = 8 * 1024
 
 ##
 ## Use a small 16K heap
 ##
-default HEAP_SIZE = 16 * 1024
+default CONFIG_HEAP_SIZE = 16 * 1024
 
 ##
 ## Only use the option table in a normal image
 ##
-#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-default USE_OPTION_TABLE = 0
+#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = 0
 
-default _RAMBASE = 0x00004000
+default CONFIG_RAMBASE = 0x00004000
 
 default CONFIG_ROM_PAYLOAD = 1
 
 ##
 ## The default compiler
 ##
-default CROSS_COMPILE = ""
-default CC = "$(CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
+default CONFIG_CROSS_COMPILE = ""
+default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC = "gcc"
 
 ##
 ## The Serial Console
@@ -174,24 +174,24 @@ default HOSTCC = "gcc"
 default CONFIG_CONSOLE_SERIAL8250 = 1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD = 115200
-#default TTYS0_BAUD = 57600
-#default TTYS0_BAUD = 38400
-#default TTYS0_BAUD = 19200
-#default TTYS0_BAUD = 9600
-#default TTYS0_BAUD = 4800
-#default TTYS0_BAUD = 2400
-#default TTYS0_BAUD = 1200
+default CONFIG_TTYS0_BAUD = 115200
+#default CONFIG_TTYS0_BAUD = 57600
+#default CONFIG_TTYS0_BAUD = 38400
+#default CONFIG_TTYS0_BAUD = 19200
+#default CONFIG_TTYS0_BAUD = 9600
+#default CONFIG_TTYS0_BAUD = 4800
+#default CONFIG_TTYS0_BAUD = 2400
+#default CONFIG_TTYS0_BAUD = 1200
 
 # Select the serial console base port
-default TTYS0_BASE = 0x3f8
+default CONFIG_TTYS0_BASE = 0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS = 0x3
+default CONFIG_TTYS0_LCS = 0x3
 
 # Compile extra debugging code
-default DEBUG = 1
+default CONFIG_DEBUG = 1
 
 ##
 ### Select the coreboot loglevel
@@ -203,13 +203,13 @@ default DEBUG = 1
 ## WARNING    5   warning conditions
 ## NOTICE     6   normal but significant condition
 ## INFO       7   informational
-## DEBUG      8   debug-level messages
+## CONFIG_DEBUG      8   debug-level messages
 ## SPEW       9   Way too many details
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL = 8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL = 8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 
 #
 # CBFS