mb/lowrisc/nexys4ddr: Actually fix the UART clock setup

Ron's code calculated the DLL and DLM registers of the 8250 UART, but
that's the job of the UART driver. uart_input_clock_divider isn't needed
anymore because the default value of 16 works.

As a bonus, the baud rate can now be selected in Kconfig, instead of
being hardcoded at 115200.

TEST=Booted the board at 9600 and 115200 baud.

Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17188
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 2 insertions, 11 deletions

diff --git a/src/mainboard/lowrisc/nexys4ddr/uart.c b/src/mainboard/lowrisc/nexys4ddr/uart.c
index e3c233f80b..d19ce520d8 100644
--- a/src/mainboard/lowrisc/nexys4ddr/uart.c
+++ b/src/mainboard/lowrisc/nexys4ddr/uart.c
@@ -24,17 +24,8 @@ uintptr_t uart_platform_base(int idx)
 	return (uintptr_t) 0x42000000;
 }
 
-/* these are currently not quite right but they are here for reference
- * and will be fixed when lowrisc gives us a standard clock
- * and set of values. */
-// divisor = clk_freq / (16 * Baud)
-unsigned int uart_input_clock_divider(void)
-{
-	return (25 * 1000 * 1000u / (16u * 115200u)) % 0x100;
-}
-
-// System clock 25 MHz, 115200 baud rate
+/* The clock which the UART is based on */
 unsigned int uart_platform_refclk(void)
 {
-	return (25 * 1000 * 1000u / (16u * 115200u)) >> 8;
+	return 25 * MHz;
 }