diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-24 00:04:22 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-31 03:41:11 +0000 |
commit | 1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch) | |
tree | bf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard/msi/ms9185 | |
parent | f054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff) | |
download | coreboot-1740230ace3aeede3a7ee5cadd1e17744cda07b3.tar.xz |
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/msi/ms9185')
-rw-r--r-- | src/mainboard/msi/ms9185/Kconfig | 62 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/Kconfig.name | 2 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/board_info.txt | 4 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/cmos.layout | 52 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/devicetree.cb | 85 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/get_bus_conf.c | 130 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/irq_tables.c | 118 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/mb_sysconf.h | 33 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/mptable.c | 161 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/resourcemap.c | 286 | ||||
-rw-r--r-- | src/mainboard/msi/ms9185/romstage.c | 176 |
11 files changed, 0 insertions, 1109 deletions
diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig deleted file mode 100644 index 355fdcfa35..0000000000 --- a/src/mainboard/msi/ms9185/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_MSI_MS9185 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM5780 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms9185 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config MAINBOARD_PART_NUMBER - string - default "MS-9185" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9185 diff --git a/src/mainboard/msi/ms9185/Kconfig.name b/src/mainboard/msi/ms9185/Kconfig.name deleted file mode 100644 index 00594c059d..0000000000 --- a/src/mainboard/msi/ms9185/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS9185 - bool "MS-9185 (K9SD Master-S2R)" diff --git a/src/mainboard/msi/ms9185/board_info.txt b/src/mainboard/msi/ms9185/board_info.txt deleted file mode 100644 index e5081f9922..0000000000 --- a/src/mainboard/msi/ms9185/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: K9SD Master-S2R (MS-9185) -Category: server -Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_9185.aspx -Release year: 2006 diff --git a/src/mainboard/msi/ms9185/cmos.layout b/src/mainboard/msi/ms9185/cmos.layout deleted file mode 100644 index e42037e1a1..0000000000 --- a/src/mainboard/msi/ms9185/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb deleted file mode 100644 index 3c9168d2ee..0000000000 --- a/src/mainboard/msi/ms9185/devicetree.cb +++ /dev/null @@ -1,85 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # northbridge - # devices on link 0 - chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 - device pci 1.0 on # PXB 2 0x0130 - device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 - device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 - end - device pci 2.0 on end # PCI E 1 #0x0132 - device pci 3.0 on end # PCI E 2 - device pci 4.0 on end # PCI E 3 - device pci 5.0 on end # PCI E 4 - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PPBX 0x0104 - device pci e.0 on end # SATA 0x024a - device pci e.1 on end # SATA 0x024a bx_a001 - device pci e.2 on end # SATA 0x024a bx_a001 - device pci e.3 on end # SATA 0x024a bx_a001 - end - device pci 1.0 on # Legacy pci main 0x0205 - end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end - end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # it is in bcm5785_0 bus - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # amdk8 - end #domain -end diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c deleted file mode 100644 index d02f30687a..0000000000 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0)); - if (dev) { - m->bus_bcm5785_1_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for (i = 1; i < 7; i++) { - dev = - dev_find_slot(m->bus_bcm5780[0], - PCI_DEVFN(m->sbdn2 + i - 1, 0)); - if (dev) { - m->bus_bcm5780[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5780[0], m->sbdn2 + i - 1); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - for (i = 0; i < 3; i++) - m->apicid_bcm5785[i] = apicid_base + i; -} diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c deleted file mode 100644 index 65f82a2823..0000000000 --- a/src/mainboard/msi/ms9185/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_bcm5785_0; - pirq->rtr_devfn = (sysconf.sbdn << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1166; - pirq->rtr_device = 0x0036; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/msi/ms9185/mb_sysconf.h b/src/mainboard/msi/ms9185/mb_sysconf.h deleted file mode 100644 index 6944c2465c..0000000000 --- a/src/mainboard/msi/ms9185/mb_sysconf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c deleted file mode 100644 index ea7c905af0..0000000000 --- a/src/mainboard/msi/ms9185/mptable.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biederman <ebiderman@lnxi.com> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - - int i, bus_isa; - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev = NULL; - struct resource *res; - for (i = 0; i < 3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, - res2mmio(res, 0, 0)); - } - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); - -//IDE - outb(0x02, 0xc00); outb(0x0e, 0xc01); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, - m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE - -//SATA - outb(0x07, 0xc00); outb(0x0f, 0xc01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xf); - -//USB - outb(0x01, 0xc00); outb(0x0a, 0xc01); - for (i = 0; i < 3; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); // - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - struct device *dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if (dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1 << 4); // enable interrupts - pci_write_config32(dev, 0x6c, dword); - } - } - -//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 - // AIC 8130 Galileo Technology... - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_1_1, (6 << 2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); // - - -//pci slot (on bcm5785) - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, (5 << 2)|i, m->apicid_bcm5785[1], 8+i%4); // - - -//onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, (4 << 2)|0, m->apicid_bcm5785[1], 0x1); - -//PCI-X on bcm5780 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[1], (4 << 2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); // - -//onboard Broadcom - for (i = 0; i < 2; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[2], (4 << 2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); // - - -// First PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[5], (0 << 2)|i, m->apicid_bcm5785[1], 0xe); // - - -// Second PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[3], (0 << 2)|i, m->apicid_bcm5785[1], 0xc); // - -// Third PCI-E x1 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[4], (0 << 2)|i, m->apicid_bcm5785[1], 0xd); // - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c deleted file mode 100644 index 533f31a49a..0000000000 --- a/src/mainboard/msi/ms9185/resourcemap.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ms9185 needs a different resource map - * - */ - -static void setup_ms9185_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c deleted file mode 100644 index d8cff07ff3..0000000000 --- a/src/mainboard/msi/ms9185/romstage.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <reset.h> -#include <cpu/x86/lapic.h> - -#include <superio/nsc/pc87417/pc87417.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) -#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/broadcom/bcm5785/early_setup.c" -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define RC0 (0x10 << 8) -#define RC1 (0x01 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - //second node - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - //enable RTC - pc87417_enable_dev(RTC_DEV); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_ms9185_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); -//bx_a010- wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - bcm5785_early_setup(); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - -#if 1 - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } -#endif - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synchronize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} |