summaryrefslogtreecommitdiff
path: root/src/mainboard/msi
diff options
context:
space:
mode:
authorElyes HAOUAS <ehaouas@noos.fr>2014-07-23 09:23:29 +0200
committerPatrick Georgi <patrick@georgi-clan.de>2014-07-24 12:42:52 +0200
commitd36905cdd586b782db6bf3d76e8622794b4a0bb9 (patch)
tree97e9b0f6bd58fe01b6d9f46b656d12ff77a58809 /src/mainboard/msi
parent23fa3c245a62a1af8604b3522fbebf23b2525bf9 (diff)
downloadcoreboot-d36905cdd586b782db6bf3d76e8622794b4a0bb9.tar.xz
mainboard/msi/ms9282: Remove trailing whitespace
Change-Id: I93808f7798a18ab0993401af556fbb65dbcee32a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6347 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src/mainboard/msi')
-rw-r--r--src/mainboard/msi/ms9282/devicetree.cb360
-rw-r--r--src/mainboard/msi/ms9282/get_bus_conf.c14
-rw-r--r--src/mainboard/msi/ms9282/irq_tables.c122
-rw-r--r--src/mainboard/msi/ms9282/mb_sysconf.h4
-rw-r--r--src/mainboard/msi/ms9282/mptable.c94
-rw-r--r--src/mainboard/msi/ms9282/resourcemap.c500
-rw-r--r--src/mainboard/msi/ms9282/romstage.c72
7 files changed, 583 insertions, 583 deletions
diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb
index 82103229be..747347e504 100644
--- a/src/mainboard/msi/ms9282/devicetree.cb
+++ b/src/mainboard/msi/ms9282/devicetree.cb
@@ -1,182 +1,182 @@
chip northbridge/amd/amdk8/root_complex # Root complex
- device cpu_cluster 0 on # (L)APIC cluster
- chip cpu/amd/socket_F # CPU socket
- device lapic 0 on end # Local APIC of the CPU
- end
- end
- device domain 0 on # PCI domain
- subsystemid 0x1462 0x9282 inherit
- chip northbridge/amd/amdk8 # Northbridge / RAM controller
- device pci 18.0 on # Link 0 == LDT 0
- chip southbridge/nvidia/mcp55 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627ehg # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # PS/2 keyboard & mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.106 off # Serial flash interface (SFI)
- io 0x60 = 0x100
- end
- device pnp 2e.007 off # GPIO 1
- end
- device pnp 2e.107 off # Game port
- io 0x60 = 0x220
- end
- device pnp 2e.207 off # MIDI
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.307 off # GPIO 6
- end
- device pnp 2e.8 off end # WDTO#, PLED
- device pnp 2e.009 off # GPIO 2
- end
- device pnp 2e.109 off # GPIO 3
- end
- device pnp 2e.209 off # GPIO 4
- end
- device pnp 2e.309 off # GPIO 5
- end
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # Hardware monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux
- device i2c 70 on # 0 pca9554 1
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 57 on end
- end
- end
- device i2c 70 on # 0 pca9554 2
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 57 on end
- end
- end
- end
- end
- device pci 1.1 on # SM 1
- chip drivers/i2c/i2cmux2 # pca9554 SMBus mux
- device i2c 72 on # PCA9554 channel 1
- chip drivers/i2c/adm1027 # HWM ADT7476 1
- device i2c 2e on end
- end
- end
- device i2c 72 on # PCA9545 channel 2
- chip drivers/i2c/adm1027 # HWM ADT7463
- device i2c 2e on end
- end
- end
- device i2c 72 on end # PCA9545 channel 3
- device i2c 72 on # PCA9545 channel 4
- chip drivers/i2c/adm1027 # HWM ADT7476 2
- device i2c 2e on end
- end
- end
- end
- end
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on # P2P
- device pci 4.0 on end
- end
- device pci 7.0 on end # reserve
- device pci 8.0 on end # MAC0
- device pci 9.0 on end # MAC1
- device pci a.0 on
- device pci 0.0 on
- device pci 4.0 on end # PCI-E LAN1
- device pci 4.1 on end # PCI-E LAN2
- end
- end # 0x376
- device pci b.0 on end # PCI E 0x374
- device pci c.0 on end
- device pci d.0 on # SAS
- device pci 0.0 on end
- end # PCI E 1 0x378
- device pci e.0 on end # PCI E 0 0x375
- device pci f.0 on end # PCI E 0x377, PCI-E slot
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- end
- end
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
+ device cpu_cluster 0 on # (L)APIC cluster
+ chip cpu/amd/socket_F # CPU socket
+ device lapic 0 on end # Local APIC of the CPU
+ end
+ end
+ device domain 0 on # PCI domain
+ subsystemid 0x1462 0x9282 inherit
+ chip northbridge/amd/amdk8 # Northbridge / RAM controller
+ device pci 18.0 on # Link 0 == LDT 0
+ chip southbridge/nvidia/mcp55 # Southbridge
+ device pci 0.0 on end # HT
+ device pci 1.0 on # LPC
+ chip superio/winbond/w83627ehg # Super I/O
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # PS/2 keyboard & mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.106 off # Serial flash interface (SFI)
+ io 0x60 = 0x100
+ end
+ device pnp 2e.007 off # GPIO 1
+ end
+ device pnp 2e.107 off # Game port
+ io 0x60 = 0x220
+ end
+ device pnp 2e.207 off # MIDI
+ io 0x62 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.307 off # GPIO 6
+ end
+ device pnp 2e.8 off end # WDTO#, PLED
+ device pnp 2e.009 off # GPIO 2
+ end
+ device pnp 2e.109 off # GPIO 3
+ end
+ device pnp 2e.209 off # GPIO 4
+ end
+ device pnp 2e.309 off # GPIO 5
+ end
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # Hardware monitor
+ io 0x60 = 0x290
+ irq 0x70 = 5
+ end
+ end
+ end
+ device pci 1.1 on # SM 0
+ chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux
+ device i2c 70 on # 0 pca9554 1
+ chip drivers/generic/generic # DIMM 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-1
+ device i2c 57 on end
+ end
+ end
+ device i2c 70 on # 0 pca9554 2
+ chip drivers/generic/generic # DIMM 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-1
+ device i2c 57 on end
+ end
+ end
+ end
+ end
+ device pci 1.1 on # SM 1
+ chip drivers/i2c/i2cmux2 # pca9554 SMBus mux
+ device i2c 72 on # PCA9554 channel 1
+ chip drivers/i2c/adm1027 # HWM ADT7476 1
+ device i2c 2e on end
+ end
+ end
+ device i2c 72 on # PCA9545 channel 2
+ chip drivers/i2c/adm1027 # HWM ADT7463
+ device i2c 2e on end
+ end
+ end
+ device i2c 72 on end # PCA9545 channel 3
+ device i2c 72 on # PCA9545 channel 4
+ chip drivers/i2c/adm1027 # HWM ADT7476 2
+ device i2c 2e on end
+ end
+ end
+ end
+ end
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # IDE
+ device pci 5.0 on end # SATA 0
+ device pci 5.1 on end # SATA 1
+ device pci 5.2 on end # SATA 2
+ device pci 6.0 on # P2P
+ device pci 4.0 on end
+ end
+ device pci 7.0 on end # reserve
+ device pci 8.0 on end # MAC0
+ device pci 9.0 on end # MAC1
+ device pci a.0 on
+ device pci 0.0 on
+ device pci 4.0 on end # PCI-E LAN1
+ device pci 4.1 on end # PCI-E LAN2
+ end
+ end # 0x376
+ device pci b.0 on end # PCI E 0x374
+ device pci c.0 on end
+ device pci d.0 on # SAS
+ device pci 0.0 on end
+ end # PCI E 1 0x378
+ device pci e.0 on end # PCI E 0 0x375
+ device pci f.0 on end # PCI E 0x377, PCI-E slot
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
+ end
+ end
+ device pci 18.0 on end # Link 1
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end
+ end
end
diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c
index 4ab124d5fc..195ddc4fce 100644
--- a/src/mainboard/msi/ms9282/get_bus_conf.c
+++ b/src/mainboard/msi/ms9282/get_bus_conf.c
@@ -101,21 +101,21 @@ void get_bus_conf(void)
m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
} else {
printk(BIOS_DEBUG,
- "ERROR - could not find PCI 1:%02x.0, using defaults\n",
- sysconf.sbdn + 0x06);
+ "ERROR - could not find PCI 1:%02x.0, using defaults\n",
+ sysconf.sbdn + 0x06);
}
for (i = 2; i < 8; i++) {
dev =
- dev_find_slot(m->bus_mcp55[0],
- PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0));
+ dev_find_slot(m->bus_mcp55[0],
+ PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0));
if (dev) {
m->bus_mcp55[i] =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
+ pci_read_config8(dev, PCI_SECONDARY_BUS);
} else {
printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
- m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2);
+ "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
+ m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2);
}
}
diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c
index c02e92c19d..b41ca95938 100644
--- a/src/mainboard/msi/ms9282/irq_tables.c
+++ b/src/mainboard/msi/ms9282/irq_tables.c
@@ -38,21 +38,21 @@
#include "mb_sysconf.h"
static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
+ uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
+ uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
@@ -60,73 +60,73 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t dev
unsigned long write_pirq_routing_table(unsigned long addr)
{
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
- struct mb_sysconf_t *m;
- unsigned sbdn;
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ unsigned slot_num;
+ uint8_t *v;
+ struct mb_sysconf_t *m;
+ unsigned sbdn;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
- sbdn = sysconf.sbdn;
- m = sysconf.mb;
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ sbdn = sysconf.sbdn;
+ m = sysconf.mb;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
- pirq = (void *)(addr);
- v = (uint8_t *)(addr);
+ pirq = (void *)(addr);
+ v = (uint8_t *)(addr);
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = m->bus_mcp55[0];
- pirq->rtr_devfn = ((sbdn+6)<<3)|0;
+ pirq->rtr_bus = m->bus_mcp55[0];
+ pirq->rtr_devfn = ((sbdn+6)<<3)|0;
- pirq->exclusive_irqs = 0;
+ pirq->exclusive_irqs = 0;
- pirq->rtr_vendor = 0x10de;
- pirq->rtr_device = 0x0370;
+ pirq->rtr_vendor = 0x10de;
+ pirq->rtr_device = 0x0370;
- pirq->miniport_data = 0;
+ pirq->miniport_data = 0;
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
- pirq_info = (void *) ( &pirq->checksum + 1);
- slot_num = 0;
+ pirq_info = (void *) ( &pirq->checksum + 1);
+ slot_num = 0;
//pci bridge
- write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
- for(i=1; i< sysconf.hc_possible_num; i++) {
- if(!(sysconf.pci1234[i] & 0x1) ) continue;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
+ for(i=1; i< sysconf.hc_possible_num; i++) {
+ if(!(sysconf.pci1234[i] & 0x1) ) continue;
+ unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
+ unsigned devn = sysconf.hcdn[i] & 0xff;
- write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
- }
+ write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+ }
- pirq->size = 32 + 16 * slot_num;
+ pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
- sum = pirq->checksum - sum;
+ sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
- printk(BIOS_INFO, "done.\n");
+ printk(BIOS_INFO, "done.\n");
- return (unsigned long) pirq_info;
+ return (unsigned long) pirq_info;
}
diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h
index a1ad772bb0..4b1516884b 100644
--- a/src/mainboard/msi/ms9282/mb_sysconf.h
+++ b/src/mainboard/msi/ms9282/mb_sysconf.h
@@ -26,8 +26,8 @@
#define MB_SYSCONF_H
struct mb_sysconf_t {
- unsigned char bus_mcp55[8]; //1
- unsigned apicid_mcp55;
+ unsigned char bus_mcp55[8]; //1
+ unsigned apicid_mcp55;
};
#endif
diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c
index c22ec180de..1764cf358b 100644
--- a/src/mainboard/msi/ms9282/mptable.c
+++ b/src/mainboard/msi/ms9282/mptable.c
@@ -32,17 +32,17 @@
static void *smp_write_config_table(void *v)
{
- struct mp_config_table *mc;
+ struct mp_config_table *mc;
struct mb_sysconf_t *m;
unsigned sbdn;
int i, j, bus_isa;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LOCAL_APIC_ADDR);
- smp_write_processors(mc);
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
@@ -50,81 +50,81 @@ static void *smp_write_config_table(void *v)
mptable_write_buses(mc, NULL, &bus_isa);
-/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
- struct resource *res;
- uint32_t dword;
+/*I/O APICs: APIC ID Version State Address*/
+ {
+ device_t dev;
+ struct resource *res;
+ uint32_t dword;
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (res) {
- smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
- }
+ dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
+ }
- dword = 0x43c6c643;
- pci_write_config32(dev, 0x7c, dword);
+ dword = 0x43c6c643;
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x81001a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x81001a00;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0xd00002d2;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0xd00002d2;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
- }
+ }
mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0);
//SMBUS
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
//USB1.1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
//USB2.0
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
//SATA1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
//SATA2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
//SATA3
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
//NIC1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
//NIC2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
- for(j=7; j>=2; j--) {
- if(!m->bus_mcp55[j]) continue;
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
- }
- }
+ for(j=7; j>=2; j--) {
+ if(!m->bus_mcp55[j]) continue;
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
+ }
+ }
- for(j=0; j<1; j++)
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
- }
+ for(j=0; j<1; j++)
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
+ }
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, bus_isa);
- /* There is no extension information... */
+ mptable_lintsrc(mc, bus_isa);
+ /* There is no extension information... */
- /* Compute the checksums */
- return mptable_finalize(mc);
+ /* Compute the checksums */
+ return mptable_finalize(mc);
}
unsigned long write_smp_table(unsigned long addr)
{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
}
diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c
index 7a6329c5af..76b7dc8734 100644
--- a/src/mainboard/msi/ms9282/resourcemap.c
+++ b/src/mainboard/msi/ms9282/resourcemap.c
@@ -31,268 +31,268 @@
static void setup_ms9282_resource_map(void)
{
- static const unsigned int register_values[] = {
+ static const unsigned int register_values[] = {
#if 1
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
#endif
#if 1
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
#endif
#if 1
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
#endif
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration region i
- */
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration region i
+ */
#if 1
-// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003,
-// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003,
+// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
#endif
- };
+ };
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
+ int max;
+ max = ARRAY_SIZE(register_values);
+ setup_resource_map(register_values, max);
}
diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c
index 9e4a227de9..9a6e21fc3a 100644
--- a/src/mainboard/msi/ms9282/romstage.c
+++ b/src/mainboard/msi/ms9282/romstage.c
@@ -53,14 +53,14 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_SWITCH1 0x70
#define SMBUS_SWITCH2 0x72
- unsigned device=(ctrl->channel0[0])>>8;
- smbus_send_byte(SMBUS_SWITCH1, device);
- smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
+ unsigned device=(ctrl->channel0[0])>>8;
+ smbus_send_byte(SMBUS_SWITCH1, device);
+ smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
- return smbus_read_byte(device, address);
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdk8/f.h"
@@ -74,10 +74,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
//set GPIO to input mode
#define MCP55_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
#include "southbridge/nvidia/mcp55/early_setup_car.c"
#include "cpu/amd/model_fxx/init_cpus.c"
@@ -87,16 +87,16 @@ static inline int spd_read_byte(unsigned device, unsigned address)
static void sio_setup(void)
{
- uint32_t dword;
- uint8_t byte;
+ uint32_t dword;
+ uint8_t byte;
- byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
+ byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
}
//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1.
@@ -115,20 +115,20 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
unsigned bsp_apicid = 0;
- int needs_reset;
+ int needs_reset;
struct sys_info *sysinfo = &sysinfo_car;
- if (!cpu_init_detectedx && boot_cpu()) {
+ if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
- }
+ }
- if (bist == 0) {
- //init_cpus(cpu_init_detectedx);
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
+ if (bist == 0) {
+ //init_cpus(cpu_init_detectedx);
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
@@ -143,28 +143,28 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
- //wait_all_other_cores_started(bsp_apicid);
+ // It is said that we should start core1 after all core0 launched
+ start_other_cores();
+ //wait_all_other_cores_started(bsp_apicid);
#endif
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
init_timer(); /* Need to use TMICT to synconize FID/VID. */
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
- if (needs_reset) {
- print_info("ht reset -\n");
- soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\n");
+ soft_reset();
+ }
- //It's the time to set ctrl now;
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ //It's the time to set ctrl now;
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
- enable_smbus();
+ enable_smbus();
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
- post_cache_as_ram();
+ post_cache_as_ram();
}