summaryrefslogtreecommitdiff
path: root/src/mainboard/msi
diff options
context:
space:
mode:
authorKyösti Mälkki <kyosti.malkki@gmail.com>2018-05-24 00:04:22 +0300
committerKyösti Mälkki <kyosti.malkki@gmail.com>2018-05-31 03:41:11 +0000
commit1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch)
treebf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard/msi
parentf054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff)
downloadcoreboot-1740230ace3aeede3a7ee5cadd1e17744cda07b3.tar.xz
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/msi')
-rw-r--r--src/mainboard/msi/ms7135/Kconfig55
-rw-r--r--src/mainboard/msi/ms7135/Kconfig.name2
-rw-r--r--src/mainboard/msi/ms7135/acpi_tables.c53
-rw-r--r--src/mainboard/msi/ms7135/board_info.txt8
-rw-r--r--src/mainboard/msi/ms7135/cmos.layout65
-rw-r--r--src/mainboard/msi/ms7135/devicetree.cb75
-rw-r--r--src/mainboard/msi/ms7135/dsdt.asl279
-rw-r--r--src/mainboard/msi/ms7135/get_bus_conf.c100
-rw-r--r--src/mainboard/msi/ms7135/irq_tables.c256
-rw-r--r--src/mainboard/msi/ms7135/mptable.c156
-rw-r--r--src/mainboard/msi/ms7135/romstage.c166
-rw-r--r--src/mainboard/msi/ms7260/Kconfig71
-rw-r--r--src/mainboard/msi/ms7260/Kconfig.name2
-rw-r--r--src/mainboard/msi/ms7260/board_info.txt7
-rw-r--r--src/mainboard/msi/ms7260/cmos.layout70
-rw-r--r--src/mainboard/msi/ms7260/devicetree.cb143
-rw-r--r--src/mainboard/msi/ms7260/get_bus_conf.c119
-rw-r--r--src/mainboard/msi/ms7260/hda_verb.c7
-rw-r--r--src/mainboard/msi/ms7260/irq_tables.c105
-rw-r--r--src/mainboard/msi/ms7260/mptable.c107
-rw-r--r--src/mainboard/msi/ms7260/resourcemap.c279
-rw-r--r--src/mainboard/msi/ms7260/romstage.c198
-rw-r--r--src/mainboard/msi/ms9185/Kconfig62
-rw-r--r--src/mainboard/msi/ms9185/Kconfig.name2
-rw-r--r--src/mainboard/msi/ms9185/board_info.txt4
-rw-r--r--src/mainboard/msi/ms9185/cmos.layout52
-rw-r--r--src/mainboard/msi/ms9185/devicetree.cb85
-rw-r--r--src/mainboard/msi/ms9185/get_bus_conf.c130
-rw-r--r--src/mainboard/msi/ms9185/irq_tables.c118
-rw-r--r--src/mainboard/msi/ms9185/mb_sysconf.h33
-rw-r--r--src/mainboard/msi/ms9185/mptable.c161
-rw-r--r--src/mainboard/msi/ms9185/resourcemap.c286
-rw-r--r--src/mainboard/msi/ms9185/romstage.c176
-rw-r--r--src/mainboard/msi/ms9282/Kconfig60
-rw-r--r--src/mainboard/msi/ms9282/Kconfig.name2
-rw-r--r--src/mainboard/msi/ms9282/board_info.txt4
-rw-r--r--src/mainboard/msi/ms9282/cmos.layout52
-rw-r--r--src/mainboard/msi/ms9282/devicetree.cb182
-rw-r--r--src/mainboard/msi/ms9282/get_bus_conf.c123
-rw-r--r--src/mainboard/msi/ms9282/irq_tables.c127
-rw-r--r--src/mainboard/msi/ms9282/mb_sysconf.h29
-rw-r--r--src/mainboard/msi/ms9282/mptable.c126
-rw-r--r--src/mainboard/msi/ms9282/resourcemap.c294
-rw-r--r--src/mainboard/msi/ms9282/romstage.c181
44 files changed, 0 insertions, 4612 deletions
diff --git a/src/mainboard/msi/ms7135/Kconfig b/src/mainboard/msi/ms7135/Kconfig
deleted file mode 100644
index 3affb6a2a1..0000000000
--- a/src/mainboard/msi/ms7135/Kconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-if BOARD_MSI_MS7135
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SOCKET_754
- select NORTHBRIDGE_AMD_AMDK8
- select SOUTHBRIDGE_NVIDIA_CK804
- select HT_CHAIN_DISTRIBUTE
- select SUPERIO_WINBOND_W83627THG
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select BOARD_ROMSIZE_KB_512
- select CK804_USE_NIC
- select CK804_USE_ACI
- select QRANK_DIMM_SUPPORT
- select HAVE_ACPI_TABLES
-
-config MAINBOARD_DIR
- string
- default msi/ms7135
-
-config APIC_ID_OFFSET
- hex
- default 0x0
-
-config MAINBOARD_PART_NUMBER
- string
- default "MS-7135"
-
-config MAX_CPUS
- int
- default 2
-
-config MAX_PHYSICAL_CPUS
- int
- default 1
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0x0
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x20
-
-config IRQ_SLOT_COUNT
- int
- default 13
-
-config CK804_PCI_E_X
- int
- default 0
-
-endif # BOARD_MSI_MS7135
diff --git a/src/mainboard/msi/ms7135/Kconfig.name b/src/mainboard/msi/ms7135/Kconfig.name
deleted file mode 100644
index d087e684f9..0000000000
--- a/src/mainboard/msi/ms7135/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_MSI_MS7135
- bool "MS-7135 (K8N Neo3)"
diff --git a/src/mainboard/msi/ms7135/acpi_tables.c b/src/mainboard/msi/ms7135/acpi_tables.c
deleted file mode 100644
index a637637a84..0000000000
--- a/src/mainboard/msi/ms7135/acpi_tables.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * ACPI support
- * written by Stefan Reinauer <stepan@openbios.org>
- * (C) 2005 Stefan Reinauer
- *
- *
- * Copyright 2005 AMD
- * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
- */
-
-#include <arch/acpi.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <assert.h>
-
-/* APIC */
-unsigned long acpi_fill_madt(unsigned long current)
-{
- struct device *dev;
- struct resource *res;
-
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write NVIDIA CK804 IOAPIC. */
- dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0));
- ASSERT(dev != NULL);
-
- res = find_resource(dev, PCI_BASE_ADDRESS_1);
- ASSERT(res != NULL);
-
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current,
- CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0);
-
- /* Initialize interrupt mapping if mptable.c didn't. */
-#if (!CONFIG_GENERATE_MP_TABLE)
-#error untested config
- pci_write_config32(dev, 0x7c, 0x0120d218);
- pci_write_config32(dev, 0x80, 0x12008a00);
- pci_write_config32(dev, 0x84, 0x0000007d);
-#endif
-
- /* IRQ9 */
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
-
- /* create all subtables for processors */
- /* acpi_create_madt_lapic_nmis returns current, not size. */
- current = acpi_create_madt_lapic_nmis(current,
- MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
-
- return current;
-}
diff --git a/src/mainboard/msi/ms7135/board_info.txt b/src/mainboard/msi/ms7135/board_info.txt
deleted file mode 100644
index caae90a766..0000000000
--- a/src/mainboard/msi/ms7135/board_info.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Board name: MS-7135 (K8N Neo3)
-Category: desktop
-Board URL: http://no.msi.com/product/mb/K8N-Neo3.html
-ROM package: PLCC
-ROM protocol: LPC
-ROM socketed: variable
-Flashrom support: y
-Release year: 2005
diff --git a/src/mainboard/msi/ms7135/cmos.layout b/src/mainboard/msi/ms7135/cmos.layout
deleted file mode 100644
index 531b2d62cc..0000000000
--- a/src/mainboard/msi/ms7135/cmos.layout
+++ /dev/null
@@ -1,65 +0,0 @@
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 8 h 0 century
-408 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-448 4 e 10 ram_voltage
-452 4 e 11 nf4_voltage
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-10 0 2.55
-10 1 2.50
-10 2 2.60
-10 3 2.65
-10 4 2.70
-
-11 0 1.50
-11 1 1.55
-11 2 1.60
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/msi/ms7135/devicetree.cb b/src/mainboard/msi/ms7135/devicetree.cb
deleted file mode 100644
index e3f0c8c98a..0000000000
--- a/src/mainboard/msi/ms7135/devicetree.cb
+++ /dev/null
@@ -1,75 +0,0 @@
-chip northbridge/amd/amdk8/root_complex # Root complex
- device cpu_cluster 0 on # (L)APIC cluster
- chip cpu/amd/socket_754 # CPU socket
- device lapic 0 on end # Local APIC of the CPU
- end
- end
-
- device domain 0 on # PCI domain
- subsystemid 0x1462 0x7135 inherit
- chip northbridge/amd/amdk8 # Northbridge / RAM controller
- device pci 18.0 on # Link 0 == LDT 0
- chip southbridge/nvidia/ck804 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627thg # Super I/O
- device pnp 4e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 4e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.5 on # PS/2 keyboard & mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 4e.7 off end # Game port, MIDI, GPIO 1 & 5
- device pnp 4e.8 off end # GPIO 2
- device pnp 4e.9 off end # GPIO 3, GPIO 4
- device pnp 4e.a off end # ACPI
- device pnp 4e.b on # Hardware monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end # SMbus
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # Onboard audio (ACI)
- device pci 4.1 off end # Onboard modem (MCI), N/A
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on end # PCI
- device pci a.0 on end # NIC
- device pci b.0 off end # PCI E 3 (N/A)
- device pci c.0 off end # PCI E 2 (N/A)
- device pci d.0 on end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- end
- end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/msi/ms7135/dsdt.asl b/src/mainboard/msi/ms7135/dsdt.asl
deleted file mode 100644
index e906270b68..0000000000
--- a/src/mainboard/msi/ms7135/dsdt.asl
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com>
- * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * ISA portions taken from QEMU acpi-dsdt.dsl.
- */
-
-DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1)
-{
- #include "northbridge/amd/amdk8/util.asl"
-
- /* For now only define 2 power states:
- * - S0 which is fully on
- * - S5 which is soft off
- * Any others would involve declaring the wake up methods.
- */
- Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
- Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 })
-
- Name (PICM, 0x00)
- Method (_PIC, 1, Serialized) {
- Store (Arg0, PICM)
- }
-
- /* Root of the bus hierarchy */
- Scope (\_SB)
- {
- /* Top PCI device (CK804) */
- Device (PCI0)
- {
- Name (_HID, EisaId ("PNP0A03"))
- Name (_ADR, 0x00)
- Name (_UID, 0x00)
- Name (_BBN, 0x00)
-
- External (BUSN)
- External (MMIO)
- External (PCIO)
- External (SBLK)
- External (TOM1)
- External (HCLK)
- External (SBDN)
- External (HCDN)
-
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate ()
- {
- IO (Decode16,
- 0x0CF8, // Address Range Minimum
- 0x0CF8, // Address Range Maximum
- 0x01, // Address Alignment
- 0x08, // Address Length
- )
- WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, // Address Space Granularity
- 0x0000, // Address Range Minimum
- 0x0CF7, // Address Range Maximum
- 0x0000, // Address Translation Offset
- 0x0CF8, // Address Length
- ,, , TypeStatic)
- })
- /* Methods bellow use SSDT to get actual MMIO regs
- The IO ports are from 0xd00, optionally an VGA,
- otherwise the info from MMIO is used.
- \_SB.GXXX(node, link)
- */
- Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
- Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
- Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
- Return (Local3)
- }
-
-#include "southbridge/nvidia/ck804/acpi/ck804.asl"
-
- /* PCI Routing Table */
- Name (_PRT, Package () {
- Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LLAS, 0x00 },
- Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LLAS, 0x00 },
- Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LUOH, 0x00 },
- Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LUEH, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LAUD, 0x00 },
- Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LMOD, 0x00 },
- Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LPA0, 0x00 },
- Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LSA0, 0x00 },
- Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LSA1, 0x00 },
-
- Package (0x04) { 0x000AFFFF, 0x00, \_SB.PCI0.LEMA, 0x00 },
-
- Package (0x04) { 0x000BFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x000BFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x000BFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x000BFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
-
- Package (0x04) { 0x000CFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x000CFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x000CFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x000CFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
-
- Package (0x04) { 0x000DFFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x000DFFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x000DFFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x000DFFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
-
- Package (0x04) { 0x000EFFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x000EFFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x000EFFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x000EFFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
- })
-
- Device (PCIC)
- {
- Name (_ADR, 0x00090000)
- Name (_UID, 0x00)
- Name (_PRT, Package () {
- /* AGR slot "AGP1" */
- Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
-
- /* PCI slot "PCI1" */
- Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0007FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0007FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
- /* Not sure INTD is right, but this is what the OEM BIOS does. */
- Package (0x04) { 0x0007FFFF, 0x03, \_SB.PCI0.LNKE, 0x00 },
-
- /* PCI slot "PCI2" */
- Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },
- Package (0x04) { 0x0008FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0008FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0008FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
-
- /* PCI slot "PCI3" */
- Package (0x04) { 0x0009FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },
- Package (0x04) { 0x0009FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
- Package (0x04) { 0x0009FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
- Package (0x04) { 0x0009FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
- })
- }
-
- /* 2:00 PCIe x1 */
- Device (PEX1)
- {
- Name (_ADR, 0x000d0000)
- Name (_UID, 0x00)
- }
-
- /* 3:00 PCIe x16 */
- Device (PEX0)
- {
- Name (_ADR, 0x000e0000)
- Name (_UID, 0x00)
- }
-
- Device (LPC) {
- Name (_HID, EisaId ("PNP0A05"))
- Name (_ADR, 0x00010000)
-
- OperationRegion (CF44, PCI_Config, 0x44, 0x04)
- Field (CF44, ByteAcc, NoLock, Preserve)
- {
- ETBA, 32,
- }
-
- /* PS/2 keyboard (seems to be important for WinXP install) */
- Device (KBD)
- {
- Name (_HID, EisaId ("PNP0303"))
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f)
- }
- Method (_CRS, 0, NotSerialized)
- {
- Name (TMP, ResourceTemplate () {
- IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
- IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
- IRQNoFlags () {1}
- })
- Return (TMP)
- }
- }
-
- /* PS/2 mouse */
- Device (MOU)
- {
- Name (_HID, EisaId ("PNP0F13"))
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f)
- }
- Method (_CRS, 0, NotSerialized)
- {
- Name (TMP, ResourceTemplate () {
- IRQNoFlags () {12}
- })
- Return (TMP)
- }
- }
-
- /* Parallel port */
- Device (LP0)
- {
- Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f)
- }
- Method (_CRS, 0, NotSerialized)
- {
- Name (TMP, ResourceTemplate () {
- FixedIO (0x0378, 0x10)
- IRQNoFlags () {7}
- })
- Return (TMP)
- }
- }
-
- /* Floppy controller */
- Device (FDC0)
- {
- Name (_HID, EisaId ("PNP0700"))
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f)
- }
- Method (_CRS, 0, NotSerialized)
- {
- Name (BUF0, ResourceTemplate () {
- FixedIO (0x03F0, 0x08)
- IRQNoFlags () {6}
- DMA (Compatibility, NotBusMaster, Transfer8) {2}
- })
- Return (BUF0)
- }
- }
-#if 0
- Device (HPET)
- {
- Name (_HID, EisaId ("PNP0103"))
- Name (CRS, ResourceTemplate ()
- {
- Memory32Fixed (ReadOnly,
- 0x00000000,
- 0x00001000,
- _Y02)
- })
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0F)
- }
- Method (_CRS, 0, NotSerialized)
- {
- CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._BAS, HPT)
- Store (ETBA, HPT)
- Return (CRS)
- }
-
- }
-#endif
- }
- }
- }
-}
diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c
deleted file mode 100644
index 19b520fda0..0000000000
--- a/src/mainboard/msi/ms7135/get_bus_conf.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
- * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
- * (Thanks to LSRA University of Mannheim for their support)
- * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-#include <stdlib.h>
-
-/* Global variables for MB layouts and these will be shared by irqtable,
- * mptable and acpi_tables.
- */
-/* busnum is default */
-unsigned char bus_ck804[6];
-unsigned apicid_ck804;
-
-unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0, //no HTIO for ms7135
-};
-unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020, //ms7135 has only one ht-chain
-};
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
- unsigned apicid_base;
-
- struct device *dev;
- unsigned sbdn;
- int i;
-
- if (get_bus_conf_done == 1)
- return; //do it only once
-
- get_bus_conf_done = 1;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
- sbdn = sysconf.sbdn;
-
- for (i = 0; i < 6; i++) {
- bus_ck804[i] = 0;
- }
-
- bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff;
-
- /* CK804 */
- int dn = -1;
- for (i = 1; i < 4; i++) {
- switch (i) {
- case 1: dn = 9; break;
- case 2: dn = 13; break;
- case 3: dn = 14; break;
- default: dn = -1; break;
- }
- dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0));
- if (dev) {
- bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- }
-
-/*I/O APICs: APIC ID Version State Address*/
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
- apicid_base = get_apicid_base(3);
- else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
- apicid_ck804 = apicid_base + 0;
-}
diff --git a/src/mainboard/msi/ms7135/irq_tables.c b/src/mainboard/msi/ms7135/irq_tables.c
deleted file mode 100644
index e40794ef3c..0000000000
--- a/src/mainboard/msi/ms7135/irq_tables.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
- * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
- * (Thanks to LSRA University of Mannheim for their support)
- * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */
-
-/* This is probably not right, feel free to fix this if you don't want
- * to use the mptable.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-extern unsigned char bus_ck804[6];
-
-/**
- * Add one line to IRQ table.
- */
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
- uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2,
- uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-/**
- * Create the IRQ routing table.
- * Values are derived from getpir generated code.
- */
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
-
- uint8_t sum = 0;
- int i;
- unsigned sbdn;
-
- /* get_bus_conf() will find out all bus num and apic that share with
- * mptable.c and mptable.c
- */
- get_bus_conf();
- sbdn = sysconf.sbdn;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = bus_ck804[0];
- pirq->rtr_devfn = ((sbdn + 9) << 3) | 0;
-
- pirq->exclusive_irqs = 0x828;
-
- pirq->rtr_vendor = 0x10de;
- pirq->rtr_device = 0x005c;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-
-//Slot1 PCIE 16x
- write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4,
- 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0);
- pirq_info++;
- slot_num++;
-
-//Slot2 PCIE 1x
- write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1,
- 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0);
- pirq_info++;
- slot_num++;
-
-//Slot3 PCIE 1x
- write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2,
- 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0);
- pirq_info++;
- slot_num++;
-
-//Slot4 PCIE 4x
- write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0,
- 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8,
- 7, 0);
- pirq_info++;
- slot_num++;
-
-//Slot5 - 7 PCI
- for (i = 0; i < 3; i++) {
- write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0,
- ((i + 0) % 4) + 1, 0xdeb8,
- ((i + 1) % 4) + 1, 0xdeb8,
- ((i + 2) % 4) + 1, 0xdeb8,
- ((i + 3) % 4) + 1, 0xdeb8, i, 0);
- pirq_info++;
- slot_num++;
- }
-
-//pci bridge
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1,
- 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0);
- pirq_info++;
- slot_num++;
-
-//smbus
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2,
- 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++;
- slot_num++;
-
-//usb
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1,
- 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0);
- pirq_info++;
- slot_num++;
-
-//audio
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1,
- 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++;
- slot_num++;
-//sata
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1,
- 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++;
- slot_num++;
-//sata
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1,
- 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++;
- slot_num++;
-//nic
- write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1,
- 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++;
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "done.\n");
-
-#if 0
- unsigned char irq[4];
- irq[0] = 0;
- irq[1] = 0;
- irq[2] = 0;
- irq[3] = 0;
-
- /* Bus, device, slots IRQs for {A,B,C,D}. */
-
- irq[0] = 10; /* SMBus *//* test me */
- pci_assign_irqs(bus_ck804[0], 1, irq);
-
- irq[0] = 10; /* USB */
- irq[1] = 10;
- pci_assign_irqs(bus_ck804[0], 2, irq);
-
- irq[0] = 10; /* AC97 */
- irq[1] = 0;
- pci_assign_irqs(bus_ck804[0], 4, irq);
-
- irq[0] = 11; /* SATA */
- pci_assign_irqs(bus_ck804[0], 7, irq);
-
- irq[0] = 5; /* SATA */
- pci_assign_irqs(bus_ck804[0], 8, irq);
-
- irq[0] = 10; /* Ethernet */
- pci_assign_irqs(bus_ck804[0], 10, irq);
-
- /* physical slots */
-
- irq[0] = 5; /* PCI E1 - x1 */
- pci_assign_irqs(bus_ck804[2], 0, irq);
-
- irq[0] = 11; /* PCI E2 - x16 */
- pci_assign_irqs(bus_ck804[3], 0, irq);
-
- /* AGP-on-PCI "AGR" ignored */
-
- irq[0] = 10; /* PCI1 */
- irq[1] = 11;
- irq[2] = 5;
- irq[3] = 0;
- pci_assign_irqs(bus_ck804[1], 7, irq);
-
- irq[0] = 11; /* PCI2 */
- irq[1] = 10;
- irq[2] = 5;
- irq[3] = 0;
- pci_assign_irqs(bus_ck804[1], 8, irq);
-
- irq[0] = 5; /* PCI3 */
- irq[1] = 10;
- irq[2] = 11;
- irq[3] = 0;
- pci_assign_irqs(bus_ck804[1], 9, irq);
-#endif
-
- return (unsigned long)pirq_info;
-}
diff --git a/src/mainboard/msi/ms7135/mptable.c b/src/mainboard/msi/ms7135/mptable.c
deleted file mode 100644
index 35dc02c482..0000000000
--- a/src/mainboard/msi/ms7135/mptable.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
- * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
- * (Thanks to LSRA University of Mannheim for their support)
- * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-extern unsigned char bus_ck804[6];
-extern unsigned apicid_ck804;
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int bus_isa;
- unsigned sbdn;
-
- get_bus_conf();
- sbdn = sysconf.sbdn;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
- mptable_write_buses(mc, NULL, &bus_isa);
-
-/* I/O APICs: APIC ID Version State Address*/
- {
- struct device *dev;
- struct resource *res;
- u32 dword;
-
- dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (res) {
- smp_write_ioapic(mc, apicid_ck804, 0x11,
- res2mmio(res, 0, 0));
- }
-
- /* Initialize interrupt mapping */
-
- /* copied from stock bios */
- /*0x01800500,0x1800d509,0x00520d08*/
-
- dword = 0x08d0d218;
- pci_write_config32(dev, 0x7c, dword);
-
- dword = 0x8d001509;
- pci_write_config32(dev, 0x80, dword);
-
- dword = 0x00010271;
- pci_write_config32(dev, 0x84, dword);
-
- }
- }
-
- /* Now, assemble the table. */
- mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0);
-
-#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \
- bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin))
-
-#if 0
- // Onboard ck804 smbus
- PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */
-
-#endif
- // Onboard ck804 USB
- PCI_INT(0, sbdn+2, 0, 23);
- PCI_INT(0, sbdn+2, 1, 23);
-
- // Onboard ck804 AC-97
- PCI_INT(0, sbdn+4, 0, 23);
-
- // Onboard ck804 SATA 0
- PCI_INT(0, sbdn+7, 0, 20);
-
- // Onboard ck804 SATA 1
- PCI_INT(0, sbdn+8, 0, 21);
-
- // Onboard ck804 NIC
- PCI_INT(0, sbdn+10, 0, 22);
-
-
- /* "AGR" slot */
- PCI_INT(1, 0, 0, 16);
- PCI_INT(1, 0, 1, 17);
-
- /* legacy PCI */
- PCI_INT(1, 7, 0, 17);
- PCI_INT(1, 7, 1, 18);
- PCI_INT(1, 7, 2, 19);
- PCI_INT(1, 7, 3, 16);
-
- PCI_INT(1, 8, 0, 18);
- PCI_INT(1, 8, 1, 19);
- PCI_INT(1, 8, 2, 16);
- PCI_INT(1, 8, 3, 17);
-
- PCI_INT(1, 9, 0, 19);
- PCI_INT(1, 9, 1, 16);
- PCI_INT(1, 9, 2, 17);
- PCI_INT(1, 9, 3, 18);
-
-
- /* PCI-E x1 port */
- PCI_INT(2, 0, 0, 19);
- /* XXX guesses */
- PCI_INT(2, 0, 1, 16);
- PCI_INT(2, 0, 2, 17);
- PCI_INT(2, 0, 3, 18);
-
- /* PCI-E x16 port */ /* XXX fix me ? */
- PCI_INT(3, 0, 0, 18);
- /* XXX guesses */
- PCI_INT(3, 0, 1, 19);
- PCI_INT(3, 0, 2, 16);
- PCI_INT(3, 0, 3, 17);
-
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, bus_ck804[0]);
-
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c
deleted file mode 100644
index 39afe47749..0000000000
--- a/src/mainboard/msi/ms7135/romstage.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
- * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
- * (Thanks to LSRA University of Mannheim for their support)
- * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <cpu/x86/lapic.h>
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627thg/w83627thg.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include <console/console.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include <southbridge/nvidia/ck804/early_smbus.h>
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include <spd.h>
-#include <northbridge/amd/amdk8/pre_f.h>
-
-#if IS_ENABLED(CONFIG_HAVE_OPTION_TABLE)
-#include "option_table.h"
-#endif
-
-#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1)
-
-void memreset(int controllers, const struct mem_controller *ctrl) { }
-void activate_spd_rom(const struct mem_controller *ctrl) { }
-
-int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "lib/generic_sdram.c"
-#include <southbridge/nvidia/ck804/early_setup_ss.h>
-#include "southbridge/nvidia/ck804/early_setup_car.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-static void ms7135_set_ram_voltage(void)
-{
- u8 b;
- b = read_option(ram_voltage, 0);
- if (b > 4) /* default if above 2.70v */
- b = 0;
- printk(BIOS_INFO, "setting RAM voltage %08x\n", b);
- ck804_smbus_write_byte(1, 0x2f, 0x00, b);
-}
-
-static void ms7135_set_nf4_voltage(void)
-{
- u8 b;
- b = read_option(nf4_voltage, 0);
- if (b > 2) /* default if above 1.60v */
- b = 0;
- b |= 0x10;
- printk(BIOS_INFO, "setting NF4 voltage %08x\n", b);
- ck804_smbus_write_byte(1, 0x2f, 0x02, b);
-}
-
-static void sio_setup(void)
-{
- u32 dword;
- u8 byte;
-
- /* Subject decoding */
- byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte);
-
- /* LPC Positive Decode 0 */
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0);
- /* Serial 0, Serial 1 */
- dword |= (1 << 0) | (1 << 1);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword);
-}
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const u16 spd_addr[] = {
- DIMM0, DIMM1, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- };
-
- int needs_reset;
- unsigned bsp_apicid = 0, nodes;
- struct mem_controller ctrl[8];
-
- if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
- sio_setup();
- }
-
- if (bist == 0)
- bsp_apicid = init_cpus(cpu_init_detectedx);
-
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- needs_reset = setup_coherent_ht_domain();
-
- wait_all_core0_started();
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- needs_reset |= ht_setup_chains_x();
- needs_reset |= ck804_early_setup_x();
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset();
- }
-
- allow_all_aps_stop(bsp_apicid);
-
- nodes = get_nodes();
- //It's the time to set ctrl now;
- fill_mem_ctrl(nodes, ctrl, spd_addr);
-
- enable_smbus();
-
- ms7135_set_nf4_voltage();
- ms7135_set_ram_voltage();
-
-#if IS_ENABLED(CONFIG_DEBUG_SMBUS)
- dump_spd_registers(&ctrl[0]);
- dump_smbus_registers();
-#endif
-
- sdram_initialize(nodes, ctrl);
-}
diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig
deleted file mode 100644
index dcc74717a0..0000000000
--- a/src/mainboard/msi/ms7260/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-if BOARD_MSI_MS7260
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SOCKET_AM2
- select DIMM_DDR2
- select NORTHBRIDGE_AMD_AMDK8
- select SOUTHBRIDGE_NVIDIA_MCP55
- select HT_CHAIN_DISTRIBUTE
- select MCP55_USE_NIC
- select MCP55_USE_AZA
- select SUPERIO_WINBOND_W83627EHG
- select PARALLEL_CPU_INIT
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select LIFT_BSP_APIC_ID
- select BOARD_ROMSIZE_KB_512
- select QRANK_DIMM_SUPPORT
- select K8_ALLOCATE_IO_RANGE
- select SET_FIDVID
-
-config MAINBOARD_DIR
- string
- default msi/ms7260
-
-config DCACHE_RAM_BASE
- hex
- default 0xc8000
-
-config DCACHE_RAM_SIZE
- hex
- default 0x08000
-
-config APIC_ID_OFFSET
- hex
- default 0x10
-
-config MEM_TRAIN_SEQ
- int
- default 2
-
-config MAINBOARD_PART_NUMBER
- string
- default "MS-7260"
-
-config MAX_CPUS
- int
- default 2
-
-config MAX_PHYSICAL_CPUS
- int
- default 1
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0x0
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x20
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-config MCP55_PCI_E_X_0
- int
- default 0
-
-endif # BOARD_MSI_MS7260
diff --git a/src/mainboard/msi/ms7260/Kconfig.name b/src/mainboard/msi/ms7260/Kconfig.name
deleted file mode 100644
index f5be5e9cf3..0000000000
--- a/src/mainboard/msi/ms7260/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_MSI_MS7260
- bool "MS-7260 (K9N Neo)"
diff --git a/src/mainboard/msi/ms7260/board_info.txt b/src/mainboard/msi/ms7260/board_info.txt
deleted file mode 100644
index 40ae7a4784..0000000000
--- a/src/mainboard/msi/ms7260/board_info.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Board name: MS-7260 (K9N Neo)
-Category: desktop
-Board URL: http://no.msi.com/product/mb/K9N-Neo--PCB-1-0-.html
-ROM package: PLCC
-ROM socketed: y
-Flashrom support: coreboot-only
-Release year: 2007
diff --git a/src/mainboard/msi/ms7260/cmos.layout b/src/mainboard/msi/ms7260/cmos.layout
deleted file mode 100644
index 78dc3e23a9..0000000000
--- a/src/mainboard/msi/ms7260/cmos.layout
+++ /dev/null
@@ -1,70 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-
-# TODO: Check and fix up the values as needed.
-
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 200Mhz
-8 1 166Mhz
-8 2 133Mhz
-8 3 100Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/msi/ms7260/devicetree.cb b/src/mainboard/msi/ms7260/devicetree.cb
deleted file mode 100644
index 717ad009cf..0000000000
--- a/src/mainboard/msi/ms7260/devicetree.cb
+++ /dev/null
@@ -1,143 +0,0 @@
-chip northbridge/amd/amdk8/root_complex # Root complex
- device cpu_cluster 0 on # (L)APIC cluster
- chip cpu/amd/socket_AM2 # CPU socket
- device lapic 0 on end # Local APIC of the CPU
- end
- end
- device domain 0 on # PCI domain
- subsystemid 0x1462 0x7260 inherit
- chip northbridge/amd/amdk8 # Northbridge / RAM controller
- device pci 18.0 on # Link 0 == LDT 0
- chip southbridge/nvidia/mcp55 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627ehg # Super I/O
- device pnp 4e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 4e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.3 on # Com2 / IrDA
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.5 on # PS/2 keyboard & mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard IRQ
- irq 0x72 = 12 # PS/2 mouse IRQ
- end
- device pnp 4e.106 off # Serial flash interface (SFI)
- # io 0x62 = 0x100
- end
- device pnp 4e.007 off # GPIO 1
- end
- device pnp 4e.107 off # Game port
- # io 0x60 = 0x220 # Datasheet: 0x201
- end
- device pnp 4e.207 off # MIDI
- # io 0x62 = 0x300 # Datasheet: 0x330
- # irq 0x70 = 9
- end
- device pnp 4e.307 off # GPIO 6
- end
- device pnp 4e.8 off # WDTO#, PLED
- end
- device pnp 4e.009 off # GPIO 2
- end
- device pnp 4e.109 off # GPIO 3
- end
- device pnp 4e.209 off # GPIO 4
- end
- device pnp 4e.309 off # GPIO 5
- end
- device pnp 4e.a off # ACPI
- end
- device pnp 4e.b on # Hardware monitor
- io 0x60 = 0xa10
- # TODO: IRQ?
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- end
- # TODO: Check if the stuff below is correct / needed.
- device pci 1.1 on # SM 1
- # PCI device SMBus address will
- # depend on addon PCI device, do
- # we need to scan_smbus_bus?
- # chip drivers/generic/generic # PCIXA slot 1
- # device i2c 50 on end
- # end
- # chip drivers/generic/generic # PCIXB slot 1
- # device i2c 51 on end
- # end
- # chip drivers/generic/generic # PCIXB slot 2
- # device i2c 52 on end
- # end
- # chip drivers/generic/generic # PCI slot 1
- # device i2c 53 on end
- # end
- # chip drivers/generic/generic # Master MCP55 PCI-E
- # device i2c 54 on end
- # end
- # chip drivers/generic/generic # Slave MCP55 PCI-E
- # device i2c 55 on end
- # end
- chip drivers/generic/generic # MAC EEPROM
- device i2c 51 on end
- end
- end
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 off end # SATA 2 (N/A on this board)
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA (HD Audio)
- device pci 8.0 on end # NIC
- device pci 9.0 off end # NIC (N/A on this board)
- device pci a.0 off end # PCI E 5 (N/A on this board?)
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- # TODO: Check the two lines below.
- # 1: SMBus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_smbus" = "3"
- register "mac_eeprom_addr" = "0x51"
- end
- end
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/msi/ms7260/get_bus_conf.c b/src/mainboard/msi/ms7260/get_bus_conf.c
deleted file mode 100644
index d768041e70..0000000000
--- a/src/mainboard/msi/ms7260/get_bus_conf.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-#include <cpu/amd/amdk8_sysconf.h>
-#include <stdlib.h>
-
-/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */
-// busnum is default.
-unsigned char bus_mcp55[8]; // 1
-unsigned apicid_mcp55;
-
-unsigned pci1234x[] = {
- /* Here you only need to set value in pci1234 for HT-IO that could
- * be installed or not. You may need to preset pci1234 for HTIO board,
- * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c.
- */
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
-};
-
-unsigned hcdnx[] = {
- /* HT Chain device num, actually it is unit id base of every ht
- * device in chain, assume every chain only have 4 ht device at most.
- */
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-};
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
- unsigned int apicid_base, sbdn;
- struct device *dev;
- int i;
-
- if (get_bus_conf_done == 1)
- return; /* Do it only once. */
-
- get_bus_conf_done = 1;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */
- sbdn = sysconf.sbdn;
-
- for (i = 0; i < 8; i++)
- bus_mcp55[i] = 0;
-
- bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff;
-
- /* MCP55 */
- dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0));
- if (dev) {
- bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_mcp55[2]++;
- } else {
- printk
- (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",
- sbdn + 0x06);
-
- bus_mcp55[1] = 2;
- bus_mcp55[2] = 3;
- }
-
- for (i = 2; i < 8; i++) {
- dev = dev_find_slot(bus_mcp55[0],
- PCI_DEVFN(sbdn + 0x0a + i - 2, 0));
- if (dev) {
- bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- }
-
-/* I/O APICs: APIC ID Version State Address */
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
- apicid_base = get_apicid_base(1);
- else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
- apicid_mcp55 = apicid_base + 0;
-}
diff --git a/src/mainboard/msi/ms7260/hda_verb.c b/src/mainboard/msi/ms7260/hda_verb.c
deleted file mode 100644
index 072a306131..0000000000
--- a/src/mainboard/msi/ms7260/hda_verb.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[0] = {};
-
-const u32 pc_beep_verbs[0] = {};
-
-AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/msi/ms7260/irq_tables.c b/src/mainboard/msi/ms7260/irq_tables.c
deleted file mode 100644
index 359c1d4648..0000000000
--- a/src/mainboard/msi/ms7260/irq_tables.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
- uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2,
- uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-extern unsigned char bus_mcp55[8]; // 1
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned int slot_num, sbdn;
- uint8_t *v;
- uint8_t sum = 0;
- int i;
-
- /* Will find out all bus num and apic that share with mptable.c
- * and mptable.c and acpi_tables.c.
- */
- get_bus_conf();
- sbdn = sysconf.sbdn;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 and 0x100000. */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *)(addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_mcp55[0];
- pirq->rtr_devfn = ((sbdn + 6) << 3) | 0;
- pirq->exclusive_irqs = 0;
- pirq->rtr_vendor = 0x10de;
- pirq->rtr_device = 0x0370; /* TODO: Hm, getpir suggests 0x0364 !? */
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-
- /* PCI bridge (00:06.0) */
- write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1,
- 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++;
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum)
- pirq->checksum = sum;
-
- printk(BIOS_INFO, "done.\n");
-
- return (unsigned long)pirq_info;
-}
diff --git a/src/mainboard/msi/ms7260/mptable.c b/src/mainboard/msi/ms7260/mptable.c
deleted file mode 100644
index 6450d2da68..0000000000
--- a/src/mainboard/msi/ms7260/mptable.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-extern unsigned char bus_mcp55[8]; // 1
-extern unsigned apicid_mcp55;
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- unsigned int sbdn;
- int i, j, bus_isa;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- get_bus_conf();
- sbdn = sysconf.sbdn;
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
- /* I/O APICs: APIC ID Version State Address */
- {
- struct device *dev;
- struct resource *res;
- uint32_t dword;
-
- dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (res)
- smp_write_ioapic(mc, apicid_mcp55, 0x11,
- res2mmio(res, 0, 0));
-
- dword = 0x43c6c643;
- pci_write_config32(dev, 0x7c, dword);
-
- dword = 0x81001a00;
- pci_write_config32(dev, 0x80, dword);
-
- dword = 0xd0001202;
- pci_write_config32(dev, 0x84, dword);
- }
- }
-
- mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0);
-
- /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 1) << 2) | 1, apicid_mcp55, 0xa);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 0, apicid_mcp55, 0x16); // 22
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 1, apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 6) << 2) | 1, apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 0, apicid_mcp55, 0x14); // 20
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 1, apicid_mcp55, 0x17); // 23
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 2, apicid_mcp55, 0x15); // 21
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 8) << 2) | 0, apicid_mcp55, 0x16); // 22
-
- for (j = 7; j >= 2; j--) {
- if (!bus_mcp55[j])
- continue;
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2) | i, apicid_mcp55, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4);
- }
-
- for (j = 0; j < 2; j++) {
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[1], ((0x06 + j) << 2) | i, apicid_mcp55, 0x10 + (2 + i + j) % 4);
- }
-
- /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */
- mptable_lintsrc(mc, bus_isa);
-
- /* There is no extension information... */
-
- /* Compute the checksums. */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/msi/ms7260/resourcemap.c b/src/mainboard/msi/ms7260/resourcemap.c
deleted file mode 100644
index f17fadf1a0..0000000000
--- a/src/mainboard/msi/ms7260/resourcemap.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* TODO: This is copied from the GIGABYTE GA-M57SLI-S4 target. */
-
-static void setup_mb_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration region i
- */
-// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of CPU 0 --> Nvidia MCP55 */
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- };
-
- int max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c
deleted file mode 100644
index 1da8ba9355..0000000000
--- a/src/mainboard/msi/ms7260/romstage.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include <southbridge/nvidia/mcp55/mcp55.h>
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include <lib.h>
-#include <spd.h>
-#include <cpu/x86/lapic.h>
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627ehg/w83627ehg.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1)
-
-unsigned get_sbdn(unsigned bus);
-
-unsigned get_sbdn(unsigned bus)
-{
- pci_devfn_t dev;
-
- /* Find the device. */
- dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA,
- PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus);
-
- return (dev >> 15) & 0x1f;
-}
-
-void memreset(int controllers, const struct mem_controller *ctrl) {}
-void activate_spd_rom(const struct mem_controller *ctrl) {}
-
-int spd_read_byte(unsigned int device, unsigned int address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include <northbridge/amd/amdk8/f.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define MCP55_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
-
-#include <southbridge/nvidia/mcp55/early_setup_ss.h>
-#include "southbridge/nvidia/mcp55/early_setup_car.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-#include "cpu/amd/model_fxx/fidvid.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-static void sio_setup(void)
-{
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0);
- dword |= (1 << 0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4);
- dword |= (1 << 16);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword);
-}
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const uint16_t spd_addr[] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
- };
-
- struct sys_info *sysinfo = &sysinfo_car;
- int needs_reset = 0;
- unsigned bsp_apicid = 0;
-
- if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0. */
- /* Allow the HT devices to be found. */
- enumerate_ht_chain();
- sio_setup();
- }
-
- if (bist == 0)
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
-
- /* FIXME: This should be part of the Super I/O code/config. */
- pnp_enter_conf_state(SERIAL_DEV);
- /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */
- pnp_write_config(SERIAL_DEV, 0x24, 0);
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- pnp_exit_conf_state(SERIAL_DEV);
-
- setup_mb_resource_map();
- console_init();
- report_bist_failure(bist); /* Halt upon BIST failure. */
-
- printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
- printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
-
- /* In BSP so could hold all AP until sysinfo is in RAM. */
- set_sysinfo_in_ram(0);
-
- setup_coherent_ht_domain(); /* Routing table and start other core0. */
- wait_all_core0_started();
-
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
- /* It is said that we should start core1 after all core0 launched
- * becase optimize_link_coherent_ht is moved out from
- * setup_coherent_ht_domain, so here need to make sure last core0 is
- * started, esp for two way system (there may be APIC ID conflicts in
- * that case).
- */
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- /* Set up chains and store link pair for optimization later. */
- ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */
-
-#if IS_ENABLED(CONFIG_SET_FIDVID)
- {
- msr_t msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
- enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
- {
- msr_t msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
-#endif
-
- init_timer(); /* Need to use TMICT to synchronize FID/VID. */
-
- needs_reset |= optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
- needs_reset |= mcp55_early_setup_x();
-
- /* fidvid change will issue one LDTSTOP and the HT change will be effective too. */
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset();
- }
- allow_all_aps_stop(bsp_apicid);
-
- /* It's the time to set ctrl in sysinfo now. */
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
- enable_smbus();
-
- /* All AP stopped? */
-
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
-}
diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig
deleted file mode 100644
index 355fdcfa35..0000000000
--- a/src/mainboard/msi/ms9185/Kconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-if BOARD_MSI_MS9185
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SOCKET_F
- select DIMM_DDR2
- select DIMM_REGISTERED
- select NORTHBRIDGE_AMD_AMDK8
- select SOUTHBRIDGE_BROADCOM_BCM5780
- select SOUTHBRIDGE_BROADCOM_BCM5785
- select HT_CHAIN_DISTRIBUTE
- select SUPERIO_NSC_PC87417
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select LIFT_BSP_APIC_ID
- select BOARD_ROMSIZE_KB_512
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select QRANK_DIMM_SUPPORT
- select SET_FIDVID
-
-config MAINBOARD_DIR
- string
- default msi/ms9185
-
-config DCACHE_RAM_BASE
- hex
- default 0xcc000
-
-config DCACHE_RAM_SIZE
- hex
- default 0x04000
-
-config APIC_ID_OFFSET
- hex
- default 0x8
-
-config MAINBOARD_PART_NUMBER
- string
- default "MS-9185"
-
-config MAX_CPUS
- int
- default 4
-
-config MAX_PHYSICAL_CPUS
- int
- default 2
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x1
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0x6
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-endif # BOARD_MSI_MS9185
diff --git a/src/mainboard/msi/ms9185/Kconfig.name b/src/mainboard/msi/ms9185/Kconfig.name
deleted file mode 100644
index 00594c059d..0000000000
--- a/src/mainboard/msi/ms9185/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_MSI_MS9185
- bool "MS-9185 (K9SD Master-S2R)"
diff --git a/src/mainboard/msi/ms9185/board_info.txt b/src/mainboard/msi/ms9185/board_info.txt
deleted file mode 100644
index e5081f9922..0000000000
--- a/src/mainboard/msi/ms9185/board_info.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Board name: K9SD Master-S2R (MS-9185)
-Category: server
-Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_9185.aspx
-Release year: 2006
diff --git a/src/mainboard/msi/ms9185/cmos.layout b/src/mainboard/msi/ms9185/cmos.layout
deleted file mode 100644
index e42037e1a1..0000000000
--- a/src/mainboard/msi/ms9185/cmos.layout
+++ /dev/null
@@ -1,52 +0,0 @@
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb
deleted file mode 100644
index 3c9168d2ee..0000000000
--- a/src/mainboard/msi/ms9185/devicetree.cb
+++ /dev/null
@@ -1,85 +0,0 @@
-chip northbridge/amd/amdk8/root_complex
- device cpu_cluster 0 on
- chip cpu/amd/socket_F
- device lapic 0 on end
- end
- end
- device domain 0 on
- subsystemid 0x1022 0x2b80 inherit
- chip northbridge/amd/amdk8
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on # northbridge
- # devices on link 0
- chip southbridge/broadcom/bcm5780 # HT2000
- device pci 0.0 on end # PXB 1 0x0130
- device pci 1.0 on # PXB 2 0x0130
- device pci 4.0 on end # GB E 0x1668 vid = 0x14e4
- device pci 4.1 on end # GB E 0x1669 vid = 0x14e4
- end
- device pci 2.0 on end # PCI E 1 #0x0132
- device pci 3.0 on end # PCI E 2
- device pci 4.0 on end # PCI E 3
- device pci 5.0 on end # PCI E 4
- end
- chip southbridge/broadcom/bcm5785 # HT1000
- device pci 0.0 on # HT PXB 0x0036
- device pci d.0 on end # PPBX 0x0104
- device pci e.0 on end # SATA 0x024a
- device pci e.1 on end # SATA 0x024a bx_a001
- device pci e.2 on end # SATA 0x024a bx_a001
- device pci e.3 on end # SATA 0x024a bx_a001
- end
- device pci 1.0 on # Legacy pci main 0x0205
- end
- device pci 1.1 on end # IDE 0x0214
- device pci 1.2 on # LPC 0x0234
- chip superio/nsc/pc87417
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.f off end # XBUS
- device pnp 2e.10 on #RTC
- io 0x60 = 0x70
- io 0x62 = 0x72
- end
- end
- end
- device pci 1.3 on end # WDTimer 0x0238
- device pci 1.4 on end # XIOAPIC0 0x0235
- device pci 1.5 on end # XIOAPIC1
- device pci 1.6 on end # XIOAPIC2
- device pci 2.0 on end # USB 0x0223
- device pci 2.1 on end # USB
- device pci 2.2 on end # USB
- device pci 3.0 on end # it is in bcm5785_0 bus
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # amdk8
- end #domain
-end
diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c
deleted file mode 100644
index d02f30687a..0000000000
--- a/src/mainboard/msi/ms9185/get_bus_conf.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-#include <stdlib.h>
-#include "mb_sysconf.h"
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-struct mb_sysconf_t mb_sysconf;
-
-static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
-};
-
-static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-};
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
-
- unsigned apicid_base;
-
- struct device *dev;
- int i;
- struct mb_sysconf_t *m;
-
- if (get_bus_conf_done == 1)
- return; //do it only once
-
- get_bus_conf_done = 1;
-
- sysconf.mb = &mb_sysconf;
-
- m = sysconf.mb;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
- m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780
-
- m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff;
- m->bus_bcm5780[0] = m->bus_bcm5785_0;
-
- /* bcm5785 */
- dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0));
- if (dev) {
- m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0));
- if (dev) {
- m->bus_bcm5785_1_1 =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
- m->bus_bcm5785_0, sysconf.sbdn);
- }
-
- /* bcm5780 */
- for (i = 1; i < 7; i++) {
- dev =
- dev_find_slot(m->bus_bcm5780[0],
- PCI_DEVFN(m->sbdn2 + i - 1, 0));
- if (dev) {
- m->bus_bcm5780[i] =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
- m->bus_bcm5780[0], m->sbdn2 + i - 1);
- }
- }
-
-/*I/O APICs: APIC ID Version State Address*/
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
- apicid_base = get_apicid_base(3);
- else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
- for (i = 0; i < 3; i++)
- m->apicid_bcm5785[i] = apicid_base + i;
-}
diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c
deleted file mode 100644
index 65f82a2823..0000000000
--- a/src/mainboard/msi/ms9185/irq_tables.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-#include "mb_sysconf.h"
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
- uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2,
- uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
-
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
-
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
-
- uint8_t sum = 0;
- int i;
-
- struct mb_sysconf_t *m;
-
- get_bus_conf();
-
- m = sysconf.mb;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = m->bus_bcm5785_0;
- pirq->rtr_devfn = (sysconf.sbdn << 3) | 0;
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1166;
- pirq->rtr_device = 0x0036;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-//pci bridge
- write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn << 3) | 0,
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
- pirq_info++;
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "done.\n");
-
- return (unsigned long)pirq_info;
-
-}
diff --git a/src/mainboard/msi/ms9185/mb_sysconf.h b/src/mainboard/msi/ms9185/mb_sysconf.h
deleted file mode 100644
index 6944c2465c..0000000000
--- a/src/mainboard/msi/ms9185/mb_sysconf.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef MB_SYSCONF_H
-#define MB_SYSCONF_H
-
-struct mb_sysconf_t {
- unsigned char bus_bcm5780[7];
- unsigned char bus_bcm5785_0;
- unsigned char bus_bcm5785_1;
- unsigned char bus_bcm5785_1_1;
- unsigned apicid_bcm5785[3];
-
- unsigned sbdn2;
-};
-
-#endif
diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c
deleted file mode 100644
index ea7c905af0..0000000000
--- a/src/mainboard/msi/ms9185/mptable.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2001 Eric W.Biederman <ebiderman@lnxi.com>
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/io.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
-#include <cpu/amd/multicore.h>
-#endif
-#include <cpu/amd/amdk8_sysconf.h>
-#include "mb_sysconf.h"
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
-
- int i, bus_isa;
- struct mb_sysconf_t *m;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- get_bus_conf();
- m = sysconf.mb;
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
-/*I/O APICs: APIC ID Version State Address*/
- {
- struct device *dev = NULL;
- struct resource *res;
- for (i = 0; i < 3; i++) {
- dev = dev_find_device(0x1166, 0x0235, dev);
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11,
- res2mmio(res, 0, 0));
- }
- }
- }
-
- }
-
- mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0);
-
-//IDE
- outb(0x02, 0xc00); outb(0x0e, 0xc01);
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,
- m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE
-
-//SATA
- outb(0x07, 0xc00); outb(0x0f, 0xc01);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xf);
-
-//USB
- outb(0x01, 0xc00); outb(0x0a, 0xc01);
- for (i = 0; i < 3; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); //
-
-
-
- /* enable int */
- /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/
- {
- struct device *dev;
- dev = dev_find_device(0x1166, 0x0205, 0);
- if (dev) {
- uint32_t dword;
- dword = pci_read_config32(dev, 0x6c);
- dword |= (1 << 4); // enable interrupts
- pci_write_config32(dev, 0x6c, dword);
- }
- }
-
-//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0
- // AIC 8130 Galileo Technology...
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_1_1, (6 << 2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); //
-
-
-//pci slot (on bcm5785)
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_0, (5 << 2)|i, m->apicid_bcm5785[1], 8+i%4); //
-
-
-//onboard ati
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_0, (4 << 2)|0, m->apicid_bcm5785[1], 0x1);
-
-//PCI-X on bcm5780
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[1], (4 << 2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); //
-
-//onboard Broadcom
- for (i = 0; i < 2; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[2], (4 << 2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); //
-
-
-// First PCI-E x8
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[5], (0 << 2)|i, m->apicid_bcm5785[1], 0xe); //
-
-
-// Second PCI-E x8
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[3], (0 << 2)|i, m->apicid_bcm5785[1], 0xc); //
-
-// Third PCI-E x1
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[4], (0 << 2)|i, m->apicid_bcm5785[1], 0xd); //
-
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, bus_isa);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c
deleted file mode 100644
index 533f31a49a..0000000000
--- a/src/mainboard/msi/ms9185/resourcemap.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de>
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * ms9185 needs a different resource map
- *
- */
-
-static void setup_ms9185_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
- };
-
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c
deleted file mode 100644
index d8cff07ff3..0000000000
--- a/src/mainboard/msi/ms9185/romstage.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 Tyan
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/broadcom/bcm5785/early_smbus.c"
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include <reset.h>
-#include <cpu/x86/lapic.h>
-
-#include <superio/nsc/pc87417/pc87417.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
-#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
-
-unsigned get_sbdn(unsigned bus);
-
-void memreset(int controllers, const struct mem_controller *ctrl) { }
-
-void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_SWITCH1 0x70
-#define SMBUS_SWITCH2 0x72
- unsigned device = (ctrl->channel0[0]) >> 8;
- smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
- smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
-}
-
-int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "southbridge/broadcom/bcm5785/early_setup.c"
-#include <northbridge/amd/amdk8/f.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include <spd.h>
-#include "cpu/amd/model_fxx/init_cpus.c"
-#include "cpu/amd/model_fxx/fidvid.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-#define RC0 (0x10 << 8)
-#define RC1 (0x01 << 8)
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const uint16_t spd_addr[] = {
- //first node
- RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
- RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7,
- //second node
- RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
- RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
- };
-
- struct sys_info *sysinfo = &sysinfo_car;
-
- int needs_reset;
- unsigned bsp_apicid = 0;
-
- if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
- bcm5785_enable_lpc();
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
- }
-
- if (bist == 0)
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
-
- pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
-
- setup_ms9185_resource_map();
-
- printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
-
- setup_coherent_ht_domain();
-
- wait_all_core0_started();
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
- // It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
- * So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
- */
- start_other_cores();
-//bx_a010- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- /* it will set up chains and store link pair for optimization later */
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-
- bcm5785_early_setup();
-
-#if IS_ENABLED(CONFIG_SET_FIDVID)
- {
- msr_t msr;
- msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
- enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
- // show final fid and vid
- {
- msr_t msr;
- msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
-#endif
-
-#if 1
- needs_reset = optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
-
- // fidvid change will issue one LDTSTOP and the HT change will be effective too
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset();
- }
-#endif
- allow_all_aps_stop(bsp_apicid);
-
- //It's the time to set ctrl in sysinfo now;
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
- enable_smbus();
-
- //do we need apci timer, tsc...., only debug need it for better output
- /* all ap stopped? */
-// init_timer(); // Need to use TMICT to synchronize FID/VID
-
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
-}
diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig
deleted file mode 100644
index 9314492074..0000000000
--- a/src/mainboard/msi/ms9282/Kconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-if BOARD_MSI_MS9282
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SOCKET_F
- select DIMM_DDR2
- select DIMM_REGISTERED
- select NORTHBRIDGE_AMD_AMDK8
- select SOUTHBRIDGE_NVIDIA_MCP55
- select SUPERIO_WINBOND_W83627EHG
- select PARALLEL_CPU_INIT
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select BOARD_ROMSIZE_KB_512
- select QRANK_DIMM_SUPPORT
- select DRIVERS_I2C_ADM1027
- select DRIVERS_I2C_I2CMUX2
-
-config MAINBOARD_DIR
- string
- default msi/ms9282
-
-config DCACHE_RAM_BASE
- hex
- default 0xcc000
-
-config DCACHE_RAM_SIZE
- hex
- default 0x04000
-
-config APIC_ID_OFFSET
- hex
- default 0x10
-
-config MAINBOARD_PART_NUMBER
- string
- default "MS-9282"
-
-config MAX_CPUS
- int
- default 4
-
-config MAX_PHYSICAL_CPUS
- int
- default 2
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0x0
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x20
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-endif # BOARD_MSI_MS9282
diff --git a/src/mainboard/msi/ms9282/Kconfig.name b/src/mainboard/msi/ms9282/Kconfig.name
deleted file mode 100644
index 260c7de96e..0000000000
--- a/src/mainboard/msi/ms9282/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_MSI_MS9282
- bool "MS-9282 (K9SD Master)"
diff --git a/src/mainboard/msi/ms9282/board_info.txt b/src/mainboard/msi/ms9282/board_info.txt
deleted file mode 100644
index 01c035f93a..0000000000
--- a/src/mainboard/msi/ms9282/board_info.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Board name: K9SD Master (MS-9282)
-Category: server
-Board URL: http://cweb.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=632
-Release year: 2006
diff --git a/src/mainboard/msi/ms9282/cmos.layout b/src/mainboard/msi/ms9282/cmos.layout
deleted file mode 100644
index c4c90f697f..0000000000
--- a/src/mainboard/msi/ms9282/cmos.layout
+++ /dev/null
@@ -1,52 +0,0 @@
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 DDR400
-8 1 DDR333
-8 2 DDR266
-8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb
deleted file mode 100644
index 747347e504..0000000000
--- a/src/mainboard/msi/ms9282/devicetree.cb
+++ /dev/null
@@ -1,182 +0,0 @@
-chip northbridge/amd/amdk8/root_complex # Root complex
- device cpu_cluster 0 on # (L)APIC cluster
- chip cpu/amd/socket_F # CPU socket
- device lapic 0 on end # Local APIC of the CPU
- end
- end
- device domain 0 on # PCI domain
- subsystemid 0x1462 0x9282 inherit
- chip northbridge/amd/amdk8 # Northbridge / RAM controller
- device pci 18.0 on # Link 0 == LDT 0
- chip southbridge/nvidia/mcp55 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627ehg # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # PS/2 keyboard & mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.106 off # Serial flash interface (SFI)
- io 0x60 = 0x100
- end
- device pnp 2e.007 off # GPIO 1
- end
- device pnp 2e.107 off # Game port
- io 0x60 = 0x220
- end
- device pnp 2e.207 off # MIDI
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.307 off # GPIO 6
- end
- device pnp 2e.8 off end # WDTO#, PLED
- device pnp 2e.009 off # GPIO 2
- end
- device pnp 2e.109 off # GPIO 3
- end
- device pnp 2e.209 off # GPIO 4
- end
- device pnp 2e.309 off # GPIO 5
- end
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # Hardware monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux
- device i2c 70 on # 0 pca9554 1
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 57 on end
- end
- end
- device i2c 70 on # 0 pca9554 2
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 57 on end
- end
- end
- end
- end
- device pci 1.1 on # SM 1
- chip drivers/i2c/i2cmux2 # pca9554 SMBus mux
- device i2c 72 on # PCA9554 channel 1
- chip drivers/i2c/adm1027 # HWM ADT7476 1
- device i2c 2e on end
- end
- end
- device i2c 72 on # PCA9545 channel 2
- chip drivers/i2c/adm1027 # HWM ADT7463
- device i2c 2e on end
- end
- end
- device i2c 72 on end # PCA9545 channel 3
- device i2c 72 on # PCA9545 channel 4
- chip drivers/i2c/adm1027 # HWM ADT7476 2
- device i2c 2e on end
- end
- end
- end
- end
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on # P2P
- device pci 4.0 on end
- end
- device pci 7.0 on end # reserve
- device pci 8.0 on end # MAC0
- device pci 9.0 on end # MAC1
- device pci a.0 on
- device pci 0.0 on
- device pci 4.0 on end # PCI-E LAN1
- device pci 4.1 on end # PCI-E LAN2
- end
- end # 0x376
- device pci b.0 on end # PCI E 0x374
- device pci c.0 on end
- device pci d.0 on # SAS
- device pci 0.0 on end
- end # PCI E 1 0x378
- device pci e.0 on end # PCI E 0 0x375
- device pci f.0 on end # PCI E 0x377, PCI-E slot
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- end
- end
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c
deleted file mode 100644
index a072d6aa36..0000000000
--- a/src/mainboard/msi/ms9282/get_bus_conf.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-#include <stdlib.h>
-#include "mb_sysconf.h"
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-struct mb_sysconf_t mb_sysconf;
-
-unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
-};
-
-unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020,
- 0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-};
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
-
- unsigned apicid_base;
- struct mb_sysconf_t *m;
-
- struct device *dev;
- int i;
-
- if (get_bus_conf_done == 1)
- return; //do it only once
-
- get_bus_conf_done = 1;
-
- sysconf.mb = &mb_sysconf;
-
- m = sysconf.mb;
- memset(m, 0, sizeof(struct mb_sysconf_t));
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
-
- m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff;
-
- /* MCP55 */
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06, 0));
- if (dev) {
- m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI 1:%02x.0, using defaults\n",
- sysconf.sbdn + 0x06);
- }
-
- for (i = 2; i < 8; i++) {
- dev =
- dev_find_slot(m->bus_mcp55[0],
- PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0));
- if (dev) {
- m->bus_mcp55[i] =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
- m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2);
- }
- }
-
-/*I/O APICs: APIC ID Version State Address*/
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
- apicid_base = get_apicid_base(1);
- else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
- m->apicid_mcp55 = apicid_base + 0;
-
-}
diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c
deleted file mode 100644
index cbb621a906..0000000000
--- a/src/mainboard/msi/ms9282/irq_tables.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-#include "mb_sysconf.h"
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
- uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2,
- uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
- struct mb_sysconf_t *m;
- unsigned sbdn;
-
- uint8_t sum = 0;
- int i;
-
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
- sbdn = sysconf.sbdn;
- m = sysconf.mb;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = m->bus_mcp55[0];
- pirq->rtr_devfn = ((sbdn + 6) << 3) | 0;
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x10de;
- pirq->rtr_device = 0x0370;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-//pci bridge
- write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1,
- 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++;
- slot_num++;
-
- for (i = 1; i < sysconf.hc_possible_num; i++) {
- if (!(sysconf.pci1234[i] & 0x1))
- continue;
- unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
- unsigned devn = sysconf.hcdn[i] & 0xff;
-
- write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8,
- 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++;
- slot_num++;
- }
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "done.\n");
-
- return (unsigned long)pirq_info;
-
-}
diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h
deleted file mode 100644
index 3edba64696..0000000000
--- a/src/mainboard/msi/ms9282/mb_sysconf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef MB_SYSCONF_H
-
-#define MB_SYSCONF_H
-
-struct mb_sysconf_t {
- unsigned char bus_mcp55[8]; //1
- unsigned apicid_mcp55;
-};
-
-#endif
diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c
deleted file mode 100644
index d3a4287b96..0000000000
--- a/src/mainboard/msi/ms9282/mptable.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/amdk8_sysconf.h>
-#include "mb_sysconf.h"
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- struct mb_sysconf_t *m;
- unsigned sbdn;
-
- int i, j, bus_isa;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- get_bus_conf();
- sbdn = sysconf.sbdn;
- m = sysconf.mb;
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
-/*I/O APICs: APIC ID Version State Address*/
- {
- struct device *dev;
- struct resource *res;
- uint32_t dword;
-
- dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (res) {
- smp_write_ioapic(mc, m->apicid_mcp55, 0x11,
- res2mmio(res, 0, 0));
- }
-
- dword = 0x43c6c643;
- pci_write_config32(dev, 0x7c, dword);
-
- dword = 0x81001a00;
- pci_write_config32(dev, 0x80, dword);
-
- dword = 0xd00002d2;
- pci_write_config32(dev, 0x84, dword);
-
- }
-
-
- }
-
- mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0);
-
-//SMBUS
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
-
-//USB1.1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
-
-//USB2.0
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
-
-//SATA1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
-
-//SATA2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
-
-//SATA3
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
-
-//NIC1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
-//NIC2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
-
- for (j = 7; j >= 2; j--) {
- if (!m->bus_mcp55[j])
- continue;
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00 << 2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
- }
-
- for (j = 0; j < 1; j++)
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
-
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, bus_isa);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c
deleted file mode 100644
index 53b470a5e4..0000000000
--- a/src/mainboard/msi/ms9282/resourcemap.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de>
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * MSI ms9282 needs a different resource map
- *
- */
-
-static void setup_ms9282_resource_map(void)
-{
- static const unsigned int register_values[] = {
-#if 1
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-#endif
-#if 1
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-#endif
-#if 1
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-#endif
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration region i
- */
-#if 1
-// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003,
-// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-#endif
-
- };
-
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c
deleted file mode 100644
index 6bde880622..0000000000
--- a/src/mainboard/msi/ms9282/romstage.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include <southbridge/nvidia/mcp55/mcp55.h>
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include <cpu/x86/lapic.h>
-
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627ehg/w83627ehg.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-#include <spd.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include <device/pci_ids.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
-
-unsigned get_sbdn(unsigned bus);
-
-unsigned get_sbdn(unsigned bus)
-{
- pci_devfn_t dev;
-
- /* Find the device. */
- dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA,
- PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus);
-
- return (dev >> 15) & 0x1f;
-}
-
-void memreset(int controllers, const struct mem_controller *ctrl) { }
-
-void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_SWITCH1 0x70
-#define SMBUS_SWITCH2 0x72
- unsigned device=(ctrl->channel0[0])>>8;
- smbus_send_byte(SMBUS_SWITCH1, device);
- smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
-}
-
-int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include <northbridge/amd/amdk8/f.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include <southbridge/nvidia/mcp55/early_setup_ss.h>
-
-//set GPIO to input mode
-#define MCP55_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
-
-#include "southbridge/nvidia/mcp55/early_setup_car.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-/* FIXME
- * Dummy method to allow build
- * Determine if this board / CPU should support
- * FID/VID and implement proper support if so
- */
-#if IS_ENABLED(CONFIG_SET_FIDVID)
-void init_fidvid_ap(u32 bsp_apicid, u32 apicid) { }
-#endif
-
-static void sio_setup(void)
-{
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1 << 0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-}
-
-//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1.
-#define RC0 (2 << 8)
-#define RC1 (1 << 8)
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const uint16_t spd_addr[] = {
- // Node 0
- RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
- RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7,
- // node 1
- RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
- RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
- };
-
- unsigned bsp_apicid = 0;
- int needs_reset;
- struct sys_info *sysinfo = &sysinfo_car;
-
- if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
- sio_setup();
- }
-
- if (bist == 0) {
- //init_cpus(cpu_init_detectedx);
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
-
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_ms9282_resource_map();
-
- setup_coherent_ht_domain();
-
- wait_all_core0_started();
-
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
- //wait_all_other_cores_started(bsp_apicid);
-#endif
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-
- init_timer(); /* Need to use TMICT to synchronize FID/VID. */
-
- needs_reset = optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
- needs_reset |= mcp55_early_setup_x();
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset();
- }
-
- //It's the time to set ctrl now;
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
- enable_smbus();
-
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-}