Rename almost all occurences of LinuxBIOS to coreboot.

Due to the automatic nature of this update, I am self-acking. It worked in
abuild.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

6 files changed, 31 insertions, 31 deletions

diff --git a/src/mainboard/msi/ms6178/Options.lb b/src/mainboard/msi/ms6178/Options.lb
index 72930615f6..85a659ba0a 100644
--- a/src/mainboard/msi/ms6178/Options.lb
+++ b/src/mainboard/msi/ms6178/Options.lb
@@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT
 uses MAINBOARD
 uses MAINBOARD_VENDOR
 uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses ARCH
 uses FALLBACK_SIZE
 uses STACK_SIZE
diff --git a/src/mainboard/msi/ms7260/Options.lb b/src/mainboard/msi/ms7260/Options.lb
index be426f3231..05473c97cf 100644
--- a/src/mainboard/msi/ms7260/Options.lb
+++ b/src/mainboard/msi/ms7260/Options.lb
@@ -59,7 +59,7 @@ uses MAINBOARD_VENDOR
 uses MAINBOARD
 uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
 uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses _RAMBASE
 uses TTYS0_BAUD
 uses TTYS0_BASE
@@ -121,7 +121,7 @@ default APIC_ID_OFFSET = 0x10
 default LIFT_BSP_APIC_ID = 1
 default CONFIG_CHIP_NAME = 1
 
-# Move the default LinuxBIOS CMOS range off of AMD RTC registers.
+# Move the default coreboot CMOS range off of AMD RTC registers.
 default LB_CKS_RANGE_START = 49
 default LB_CKS_RANGE_END = 122
 default LB_CKS_LOC = 123
diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb
index 445224a40e..856237fd55 100644
--- a/src/mainboard/msi/ms9185/Config.lb
+++ b/src/mainboard/msi/ms9185/Config.lb
@@ -24,7 +24,7 @@
 
 ##
 ## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
 ##
 if USE_FALLBACK_IMAGE
        default ROM_SECTION_SIZE   = FALLBACK_SIZE
@@ -36,18 +36,18 @@ end
 
 ##
 ## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
 ##
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
 
 ##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
 ##
 default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
 
 ##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
 ## execution speed.
 ##
 ## XIP_ROM_SIZE must be a power of 2.
@@ -98,7 +98,7 @@ if USE_DCACHE_RAM
        end
 end
 ##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
 ##
 
 if USE_FALLBACK_IMAGE
@@ -118,7 +118,7 @@ if USE_DCACHE_RAM
 end
 
 ##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
 ##
 if USE_FALLBACK_IMAGE
        mainboardinit cpu/x86/16bit/reset16.inc
@@ -142,7 +142,7 @@ if USE_DCACHE_RAM
 end
 
 ###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb
index 3229be329d..d42fb1515c 100644
--- a/src/mainboard/msi/ms9185/Options.lb
+++ b/src/mainboard/msi/ms9185/Options.lb
@@ -61,7 +61,7 @@ uses MAINBOARD_VENDOR
 uses MAINBOARD
 uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
 uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses _RAMBASE
 uses TTYS0_BAUD
 uses TTYS0_BASE
@@ -131,7 +131,7 @@ default CONFIG_LB_MEM_TOPK=2048
 default HAVE_FALLBACK_BOOT=1
 
 ##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
 ##
 default HAVE_HARD_RESET=1
 
@@ -158,7 +158,7 @@ default HAVE_MP_TABLE=1
 default HAVE_OPTION_TABLE=1
 
 ##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Move the default coreboot cmos range off of AMD RTC registers
 ##
 default LB_CKS_RANGE_START=49
 default LB_CKS_RANGE_END=122
@@ -238,10 +238,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
 
 ###
-### LinuxBIOS layout values
+### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
 default ROM_IMAGE_SIZE = 65536
 
 ##
@@ -260,7 +260,7 @@ default HEAP_SIZE=0x8000
 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
 
 ##
-## LinuxBIOS C code runs at this location in RAM
+## Coreboot C code runs at this location in RAM
 ##
 default _RAMBASE=0x00100000
 
@@ -309,7 +309,7 @@ default TTYS0_BASE=0x3f8
 default TTYS0_LCS=0x3
 
 ##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
 ##
 ## EMERG      1   system is unusable
 ## ALERT      2   action must be taken immediately
diff --git a/src/mainboard/msi/ms9282/Config.lb b/src/mainboard/msi/ms9282/Config.lb
index 05ef85795a..7c3a4e7ae9 100644
--- a/src/mainboard/msi/ms9282/Config.lb
+++ b/src/mainboard/msi/ms9282/Config.lb
@@ -24,7 +24,7 @@
 
 ##
 ## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
 ##
 if USE_FALLBACK_IMAGE
        default ROM_SECTION_SIZE   = FALLBACK_SIZE
@@ -36,19 +36,19 @@ end
 
 ##
 ## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
 ##
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
 default CONFIG_ROM_PAYLOAD     = 1
 
 ##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
 ##
 default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
 
 ##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
 ## execution speed.
 ##
 ## XIP_ROM_SIZE must be a power of 2.
@@ -122,7 +122,7 @@ end
 end
 
 ##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
 ##
 if USE_FALLBACK_IMAGE
         mainboardinit cpu/x86/16bit/entry16.inc
@@ -142,7 +142,7 @@ if USE_DCACHE_RAM
 end
 
 ##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
 ##
 if USE_FALLBACK_IMAGE
        mainboardinit cpu/x86/16bit/reset16.inc
@@ -180,7 +180,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc
 end
 
 ###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb
index 9e4b94d704..bef1e01f8c 100644
--- a/src/mainboard/msi/ms9282/Options.lb
+++ b/src/mainboard/msi/ms9282/Options.lb
@@ -57,7 +57,7 @@ uses MAINBOARD_PART_NUMBER
 uses MAINBOARD_VENDOR
 uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
 uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses _RAMBASE
 uses CONFIG_GDB_STUB
 uses CROSS_COMPILE
@@ -125,7 +125,7 @@ default FALLBACK_SIZE=0x40000
 default HAVE_FALLBACK_BOOT=1
 
 ##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
 ##
 default HAVE_HARD_RESET=1
 
@@ -147,7 +147,7 @@ default HAVE_MP_TABLE=1
 default HAVE_OPTION_TABLE=1
 
 ##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Move the default coreboot cmos range off of AMD RTC registers
 ##
 default LB_CKS_RANGE_START=49
 default LB_CKS_RANGE_END=122
@@ -218,10 +218,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462
 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x9282
 
 ###
-### LinuxBIOS layout values
+### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
 default ROM_IMAGE_SIZE = 65536
 
 ##
@@ -240,7 +240,7 @@ default HEAP_SIZE=0x4000
 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
 
 ##
-## LinuxBIOS C code runs at this location in RAM
+## Coreboot C code runs at this location in RAM
 ##
 default _RAMBASE=0x00004000
 
@@ -289,7 +289,7 @@ default TTYS0_BASE=0x3f8
 default TTYS0_LCS=0x3
 
 ##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
 ##
 ## EMERG      1   system is unusable
 ## ALERT      2   action must be taken immediately