src: Get rid of unneeded whitespace

Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

2 files changed, 186 insertions, 186 deletions

diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb
index 7eaf78c9c9..35079255ad 100644
--- a/src/mainboard/msi/ms7721/devicetree.cb
+++ b/src/mainboard/msi/ms7721/devicetree.cb
@@ -47,7 +47,7 @@ chip northbridge/amd/agesa/family15tn/root_complex
 				device pci 12.2 on  end # USB EHCI
 				device pci 13.0 on  end # USB OHCI
 				device pci 13.2 on  end # USB EHCI
-				device pci 14.0 on      # SMBUS
+				device pci 14.0 on	# SMBUS
 					chip drivers/generic/generic #dimm 0
 						device i2c 50 on end # 7-bit SPD address
 					end
@@ -57,7 +57,7 @@ chip northbridge/amd/agesa/family15tn/root_complex
 				end # SM
 				device pci 14.1 off end # IDE	0x439c
 				device pci 14.2 on  end # Azalia (Audio)
-				device pci 14.3 on      # LPC	0x439d
+				device pci 14.3 on	# LPC	0x439d
 					chip superio/fintek/f71869ad
 						register "multi_function_register_1" = "0x01"
 						register "multi_function_register_2" = "0x0f"
@@ -97,51 +97,51 @@ chip northbridge/amd/agesa/family15tn/root_complex
 							io 0x60 = 0x225	# Fintek datasheet says 0x295.
 							irq 0x70 = 0
 						end
-						device pnp 4e.05 on     # KBC
+						device pnp 4e.05 on	# KBC
 							io 0x60 = 0x060
 							irq 0x70 = 1 # Keyboard IRQ
 							irq 0x72 = 12 # Mouse IRQ
 						end
-                                                device pnp 4e.06 on     # GPIO
+						device pnp 4e.06 on	# GPIO
 							# ! GPIO config is disabled because the code in romstage.c
 							# ! has already taken care of it
-                                                        #io 0x60 = 0xa00
-                                                        #irq 0xe0 = 0x04	# GPIO1 output
-                                                        #irq 0xe1 = 0xff	# GPIO1 output data
-                                                        #irq 0xe3 = 0x04	# GPIO1 drive enable
-                                                        #irq 0xe4 = 0x00	# GPIO1 PME enable
-                                                        #irq 0xe5 = 0x00	# GPIO1 input detect select
-                                                        #irq 0xe6 = 0x40	# GPIO1 event status
-
-                                                        #irq 0xd0 = 0x00	# GPIO2 output
-                                                        #irq 0xd1 = 0xff	# GPIO2 output data
-                                                        #irq 0xd3 = 0x00	# GPIO2 drive enable
-
-                                                        #irq 0xc0 = 0x00	# GPIO3 output
-                                                        #irq 0xc1 = 0xff	# GPIO3 output data
-
-                                                        #irq 0xb0 = 0x04	# GPIO4 output
-                                                        #irq 0xb1 = 0x04	# GPIO4 output data
-                                                        #irq 0xb3 = 0x04	# GPIO4 drive enable
-                                                        #irq 0xb4 = 0x00	# GPIO4 PME enable
-                                                        #irq 0xb5 = 0x00	# GPIO4 input detect select
-                                                        #irq 0xb6 = 0x00	# GPIO4 event status
-
-                                                        #irq 0xa0 = 0x00	# GPIO5 output
-                                                        #irq 0xa1 = 0x1f	# GPIO5 output data
-                                                        #irq 0xa3 = 0x00	# GPIO5 drive enable
-                                                        #irq 0xa4 = 0x00	# GPIO5 PME enable
-                                                        #irq 0xa5 = 0xff	# GPIO5 input detect select
-                                                        #irq 0xa6 = 0xe0	# GPIO5 event status
-
-                                                        #irq 0x90 = 0x00	# GPIO6 output
-                                                        #irq 0x91 = 0xff	# GPIO6 output data
-                                                        #irq 0x93 = 0x00	# GPIO6 drive enable
-
-                                                        #irq 0x80 = 0x00	# GPIO7 output
-                                                        #irq 0x81 = 0xff	# GPIO7 output data
-                                                        #irq 0x83 = 0x00	# GPIO7 drive enable
-                                                end
+							#io 0x60 = 0xa00
+							#irq 0xe0 = 0x04	# GPIO1 output
+							#irq 0xe1 = 0xff	# GPIO1 output data
+							#irq 0xe3 = 0x04	# GPIO1 drive enable
+							#irq 0xe4 = 0x00	# GPIO1 PME enable
+							#irq 0xe5 = 0x00	# GPIO1 input detect select
+							#irq 0xe6 = 0x40	# GPIO1 event status
+
+							#irq 0xd0 = 0x00	# GPIO2 output
+							#irq 0xd1 = 0xff	# GPIO2 output data
+							#irq 0xd3 = 0x00	# GPIO2 drive enable
+
+							#irq 0xc0 = 0x00	# GPIO3 output
+							#irq 0xc1 = 0xff	# GPIO3 output data
+
+							#irq 0xb0 = 0x04	# GPIO4 output
+							#irq 0xb1 = 0x04	# GPIO4 output data
+							#irq 0xb3 = 0x04	# GPIO4 drive enable
+							#irq 0xb4 = 0x00	# GPIO4 PME enable
+							#irq 0xb5 = 0x00	# GPIO4 input detect select
+							#irq 0xb6 = 0x00	# GPIO4 event status
+
+							#irq 0xa0 = 0x00	# GPIO5 output
+							#irq 0xa1 = 0x1f	# GPIO5 output data
+							#irq 0xa3 = 0x00	# GPIO5 drive enable
+							#irq 0xa4 = 0x00	# GPIO5 PME enable
+							#irq 0xa5 = 0xff	# GPIO5 input detect select
+							#irq 0xa6 = 0xe0	# GPIO5 event status
+
+							#irq 0x90 = 0x00	# GPIO6 output
+							#irq 0x91 = 0xff	# GPIO6 output data
+							#irq 0x93 = 0x00	# GPIO6 drive enable
+
+							#irq 0x80 = 0x00	# GPIO7 output
+							#irq 0x81 = 0xff	# GPIO7 output data
+							#irq 0x83 = 0x00	# GPIO7 drive enable
+						end
 
 						device pnp 4e.07 on end	# WDT
 						device pnp 4e.08 off end	# CIR
diff --git a/src/mainboard/msi/ms9652_fam10/devicetree.cb b/src/mainboard/msi/ms9652_fam10/devicetree.cb
index 51d5bf3425..c6dae6d451 100644
--- a/src/mainboard/msi/ms9652_fam10/devicetree.cb
+++ b/src/mainboard/msi/ms9652_fam10/devicetree.cb
@@ -13,153 +13,153 @@
 ##
 ## This program is distributed in the hope that it will be useful,
 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
 ## GNU General Public License for more details.
 ##
 
 chip northbridge/amd/amdfam10/root_complex	# Root complex
-  device cpu_cluster 0 on			# (L)APIC cluster
-    chip cpu/amd/socket_F_1207			# CPU socket
-      device lapic 0 on end			# Local APIC of the CPU
-    end
-  end
-  device domain 0 on			# PCI domain
-    subsystemid 0x1462 0x9652 inherit
-    chip northbridge/amd/amdfam10		# Northbridge / RAM controller
-      device pci 18.0 on			# Link 0
-        chip southbridge/nvidia/mcp55		# Southbridge
-          device pci 0.0 on end			# HT
-          device pci 1.0 on			# LPC
-            chip superio/winbond/w83627ehg	# Super I/O
-              device pnp 2e.0 on		# Floppy
-                io 0x60 = 0x3f0
-                irq 0x70 = 6
-                drq 0x74 = 2
-              end
-              device pnp 2e.1 off		# Parallel port
-                io 0x60 = 0x378
-                irq 0x70 = 7
-              end
-              device pnp 2e.2 on		# Com1
-                io 0x60 = 0x3f8
-                irq 0x70 = 4
-              end
-              device pnp 2e.3 on		# Com2
-                io 0x60 = 0x2f8
-                irq 0x70 = 3
-              end
-              device pnp 2e.5 on		# PS/2 keyboard & mouse
-                io 0x60 = 0x60
-                io 0x62 = 0x64
-                irq 0x70 = 1
-                irq 0x72 = 12
-              end
-              device pnp 2e.106 off		# Serial flash interface (SFI)
-                io 0x60 = 0x100
-              end
-              device pnp 2e.007 off		# GPIO 1
-              end
-              device pnp 2e.107 on		# Game port
-                io 0x60 = 0x220
-              end
-              device pnp 2e.207 on		# MIDI
-                io 0x62 = 0x330
-                irq 0x70 = 0xa
-              end
-              device pnp 2e.307 off		# GPIO 6
-              end
-              device pnp 2e.8 off		# WDTO#, PLED
-              end
-              device pnp 2e.009 off		# GPIO 2
-              end
-              device pnp 2e.109 off		# GPIO 3
-              end
-              device pnp 2e.209 off		# GPIO 4
-              end
-              device pnp 2e.309 off		# GPIO 5
-              end
-              device pnp 2e.a off end		# ACPI
-              device pnp 2e.b on		# Hardware monitor
-                io 0x60 = 0x290
-                irq 0x70 = 5
-              end
-            end
-          end
-          device pci 1.1 on			# SM 0
-            chip drivers/generic/generic	# DIMM 0-0-0
-              device i2c 50 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-0-1
-              device i2c 51 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-1-0
-              device i2c 52 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-1-1
-              device i2c 53 on end
-            end
-            chip drivers/generic/generic	# DIMM 1-0-0
-              device i2c 54 on end
-            end
-            chip drivers/generic/generic	# DIMM 1-0-1
-              device i2c 55 on end
-            end
-            chip drivers/generic/generic	# DIMM 1-1-0
-              device i2c 56 on end
-            end
-            chip drivers/generic/generic	# DIMM 1-1-1
-              device i2c 57 on end
-            end
-          end
-          device pci 1.1 on			# SM 1
-            # PCI device SMBus address will
-            # depend on addon PCI device, do
-            # we need to scan_smbus_bus?
-            # chip drivers/generic/generic	# PCIXA slot 1
-            #   device i2c 50 on end
-            # end
-            # chip drivers/generic/generic	# PCIXB slot 1
-            #   device i2c 51 on end
-            # end
-            # chip drivers/generic/generic	# PCIXB slot 2
-            #   device i2c 52 on end
-            # end
-            # chip drivers/generic/generic	# PCI slot 1
-            #   device i2c 53 on end
-            # end
-            # chip drivers/generic/generic	# Master MCP55 PCI-E
-            #   device i2c 54 on end
-            # end
-            # chip drivers/generic/generic	# Slave MCP55 PCI-E
-            #   device i2c 55 on end
-            # end
-            # chip drivers/generic/generic	# MAC EEPROM
-            #   device i2c 51 on end
-            # end
-          end
-          device pci 2.0 on end			# USB 1.1
-          device pci 2.1 on end			# USB 2
-          device pci 4.0 on end			# IDE
-          device pci 5.0 on end			# SATA 0
-          device pci 5.1 on end			# SATA 1
-          device pci 5.2 on end			# SATA 2
-          device pci 6.1 on end			# AZA
-          device pci 8.0 on end			# NIC
-          device pci 9.0 on end			# NIC
-          register "ide0_enable" = "1"
-          register "sata0_enable" = "1"
-          register "sata1_enable" = "1"
-          # 1: SMBus under 2e.8, 2: SM0 3: SM1
-          register "mac_eeprom_smbus" = "3"
-          register "mac_eeprom_addr" = "0x51"
-        end
-      end
-      device pci 18.0 on end			# HT 1.0
-      device pci 18.0 on end			# HT 2.0
-      device pci 18.1 on end
-      device pci 18.2 on end
-      device pci 18.3 on end
-      device pci 18.4 on end
-    end
-  end
+	device cpu_cluster 0 on			# (L)APIC cluster
+		chip cpu/amd/socket_F_1207	# CPU socket
+			device lapic 0 on end	# Local APIC of the CPU
+		end
+	end
+	device domain 0 on	# PCI domain
+		subsystemid 0x1462 0x9652 inherit
+		chip northbridge/amd/amdfam10	# Northbridge / RAM controller
+			device pci 18.0 on	# Link 0
+				chip southbridge/nvidia/mcp55	# Southbridge
+					device pci 0.0 on end	# HT
+					device pci 1.0 on	# LPC
+						chip superio/winbond/w83627ehg	# Super I/O
+							device pnp 2e.0 on	# Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 off	# Parallel port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.2 on	# Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.3 on	# Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							device pnp 2e.5 on	# PS/2 keyboard & mouse
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 1
+								irq 0x72 = 12
+							end
+							device pnp 2e.106 off	# Serial flash interface (SFI)
+								io 0x60 = 0x100
+							end
+							device pnp 2e.007 off	# GPIO 1
+							end
+							device pnp 2e.107 on	# Game port
+								io 0x60 = 0x220
+							end
+							device pnp 2e.207 on	# MIDI
+								io 0x62 = 0x330
+								irq 0x70 = 0xa
+							end
+							device pnp 2e.307 off	# GPIO 6
+							end
+							device pnp 2e.8 off	# WDTO#, PLED
+							end
+							device pnp 2e.009 off	# GPIO 2
+							end
+							device pnp 2e.109 off	# GPIO 3
+							end
+							device pnp 2e.209 off	# GPIO 4
+							end
+							device pnp 2e.309 off	# GPIO 5
+							end
+							device pnp 2e.a off end	# ACPI
+							device pnp 2e.b on	# Hardware monitor
+								io 0x60 = 0x290
+								irq 0x70 = 5
+							end
+						end
+					end
+					device pci 1.1 on	# SM 0
+						chip drivers/generic/generic	# DIMM 0-0-0
+							device i2c 50 on end
+						end
+						chip drivers/generic/generic	# DIMM 0-0-1
+							device i2c 51 on end
+						end
+						chip drivers/generic/generic	# DIMM 0-1-0
+							device i2c 52 on end
+						end
+						chip drivers/generic/generic	# DIMM 0-1-1
+							device i2c 53 on end
+						end
+						chip drivers/generic/generic	# DIMM 1-0-0
+							device i2c 54 on end
+						end
+						chip drivers/generic/generic	# DIMM 1-0-1
+							device i2c 55 on end
+						end
+						chip drivers/generic/generic	# DIMM 1-1-0
+							device i2c 56 on end
+						end
+						chip drivers/generic/generic	# DIMM 1-1-1
+							device i2c 57 on end
+						end
+					end
+					device pci 1.1 on			# SM 1
+						# PCI device SMBus address will
+						# depend on addon PCI device, do
+						# we need to scan_smbus_bus?
+						# chip drivers/generic/generic	# PCIXA slot 1
+						#	 device i2c 50 on end
+						# end
+						# chip drivers/generic/generic	# PCIXB slot 1
+						#	 device i2c 51 on end
+						# end
+						# chip drivers/generic/generic	# PCIXB slot 2
+						#	 device i2c 52 on end
+						# end
+						# chip drivers/generic/generic	# PCI slot 1
+						#	 device i2c 53 on end
+						# end
+						# chip drivers/generic/generic	# Master MCP55 PCI-E
+						#	 device i2c 54 on end
+						# end
+						# chip drivers/generic/generic	# Slave MCP55 PCI-E
+						#	 device i2c 55 on end
+						# end
+						# chip drivers/generic/generic	# MAC EEPROM
+						#	 device i2c 51 on end
+						# end
+					end
+					device pci 2.0 on end	# USB 1.1
+					device pci 2.1 on end	# USB 2
+					device pci 4.0 on end	# IDE
+					device pci 5.0 on end	# SATA 0
+					device pci 5.1 on end	# SATA 1
+					device pci 5.2 on end	# SATA 2
+					device pci 6.1 on end	# AZA
+					device pci 8.0 on end	# NIC
+					device pci 9.0 on end	# NIC
+					register "ide0_enable" = "1"
+					register "sata0_enable" = "1"
+					register "sata1_enable" = "1"
+					# 1: SMBus under 2e.8, 2: SM0 3: SM1
+					register "mac_eeprom_smbus" = "3"
+					register "mac_eeprom_addr" = "0x51"
+				end
+			end
+			device pci 18.0 on end	# HT 1.0
+			device pci 18.0 on end	# HT 2.0
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+		end
+	end
 end