diff options
author | Matt DeVillier <matt.devillier@gmail.com> | 2017-07-27 11:43:53 -0400 |
---|---|---|
committer | Matt DeVillier <matt.devillier@gmail.com> | 2017-10-26 06:40:33 +0000 |
commit | a547e40992b46a297c0915d3d387514203e9c833 (patch) | |
tree | 3198accae9495303f600a0b7c68153c9e6929926 /src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb | |
parent | c6202e8c00ba32a7a0b8516992a3a2f72caa7df2 (diff) | |
download | coreboot-a547e40992b46a297c0915d3d387514203e9c833.tar.xz |
purism/librem_skl: add new variant Librem 15 v3
Add new board librem15v3 as a variant of the librem_skl baseboard.
Changes from the librem13v2:
- Change board name and version
- Change GPIO A18, A19, A20, D9, D10 and D11 from NC to GPIO
- Enable PCI device 1c.4
- Change USB port definitions in devicetree
TEST: build w/SeaBIOS, boot PureOS on Librem 15 v3 hardware
Change-Id: I7c762a34f5b961c908e4a29ec331da4b0dea9986
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/22048
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Diffstat (limited to 'src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb')
-rw-r--r-- | src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb b/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb new file mode 100644 index 0000000000..647f054f74 --- /dev/null +++ b/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb @@ -0,0 +1,213 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "1" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "0" + register "SataPortsEnable[2]" = "1" + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[2]" = "0" + register "SataSpeedLimit" = "2" + register "EnableAzalia" = "1" + register "DspEnable" = "0" + register "IoBufferOwnership" = "0" + register "EnableTraceHub" = "0" + register "XdciEnable" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "IshEnable" = "0" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "FspSkipMpInit" = "1" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "3" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "0" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------------+-------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + # Enable Root Ports 5 and 9 + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[8]" = "1" + # Enable CLKREQ# for RP9 + register "PcieRpClkReqSupport[8]" = "0" + # ClkReq for NVMe - Bruteforced (no other value works) + register "PcieRpClkReqNumber[8]" = "2" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[3]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[4]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[7]" = "USB2_PORT_FLEX(OC_SKIP)" # SD + + # OC0 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Lock Down + register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 on end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1f.0 on + chip ec/purism/librem + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end |