Add support for the Roda RK886EX a.k.a Rocky III+ ruggedised notebook

http://www.roda-computer.com/en/products/notebooks/rocky-iii-rk886ex.html

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5031 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 115 insertions, 0 deletions

diff --git a/src/mainboard/roda/rk886ex/devicetree.cb b/src/mainboard/roda/rk886ex/devicetree.cb
new file mode 100644
index 0000000000..b578e19a55
--- /dev/null
+++ b/src/mainboard/roda/rk886ex/devicetree.cb
@@ -0,0 +1,115 @@
+##
+## This file is part of the coreboot project.
+## 
+## Copyright (C) 2007-2009 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+chip northbridge/intel/i945
+
+        device apic_cluster 0 on
+                chip cpu/intel/socket_mFCPGA478
+                        device apic 0 on end
+                end
+        end
+
+        device pci_domain 0 on 
+                device pci 00.0 on end # host bridge
+		# auto detection:
+		#device pci 01.0 off end # i945 PCIe root port
+		#device pci 02.0 on end # vga controller
+		#device pci 02.1 on end # display controller
+
+                chip southbridge/intel/i82801gx
+			register "pirqa_routing" = "0x0b"
+			register "pirqb_routing" = "0x0b"
+			register "pirqc_routing" = "0x0b"
+			register "pirqd_routing" = "0x0b"
+			register "pirqe_routing" = "0x80"
+			register "pirqf_routing" = "0x80"
+			register "pirqg_routing" = "0x0b"
+			register "pirqh_routing" = "0x0b"
+
+			# GPI routing
+			#  0 No effect (default)
+			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+			#  2 SCI (if corresponding GPIO_EN bit is also set)
+			register "gpi13_routing" = "2"
+			register "gpi8_routing"  = "1"
+			register "gpi7_routing"  = "2"
+			register "gpe0_en" = "0x20800007"
+
+                        register "ide_legacy_combined" = "0x1"
+                        register "ide_enable_primary" = "0x1"
+                        register "ide_enable_secondary" = "0x0"
+                        register "sata_ahci" = "0x0"
+
+                	device pci 1b.0 on end # High Definition Audio
+                	device pci 1c.0 on end # PCIe
+                	device pci 1c.1 on end # PCIe
+                	device pci 1c.2 on end # PCIe
+			#device pci 1c.3 off end # PCIe port 4
+			#device pci 1c.4 off end # PCIe port 5
+			#device pci 1c.5 off end # PCIe port 6
+                	device pci 1d.0 on end # USB UHCI
+                	device pci 1d.1 on end # USB UHCI
+                	device pci 1d.2 on end # USB UHCI
+                	device pci 1d.3 on end # USB UHCI
+                	device pci 1d.7 on end # USB2 EHCI
+                	device pci 1e.0 on
+				chip southbridge/ti/pci7420
+                        		register "smartcard_enabled" = "0x0"
+					device pci 3.0 on end
+					device pci 3.1 on end
+					device pci 3.2 on end
+					device pci 3.3 off end  # smartcard
+				end
+			end # PCI bridge
+			#device pci 1e.2 off end # AC'97 Audio 
+			#device pci 1e.3 off end # AC'97 Modem
+                        device pci 1f.0 on # LPC bridge
+                                chip superio/smsc/lpc47n227
+					device pnp 2e.1 off # Parallel port
+					end
+					device pnp 2e.2 on # COM1
+                                                 io 0x60 = 0x3f8
+                                                irq 0x70 = 4
+					end
+					device pnp 2e.3 on # COM2
+                                                 io 0x60 = 0x2f8
+                                                irq 0x70 = 3
+					end
+					device pnp 2e.5 off # Keyboard+Mouse
+					#	 io 0x60 = 0x60
+					#	 io 0x62 = 0x64
+					#	irq 0x70 = 1
+					#	irq 0x72 = 12
+					end
+                                end
+				chip superio/renesas/m3885x
+					device pnp ff.1 on # dummy address
+					end
+				end
+
+                        end
+			#device pci 1f.1 off end # IDE
+                        device pci 1f.2 on end  # SATA
+                        device pci 1f.3 on end  # SMBus
+			#device pci 1f.4 off end # Realtek ID Codec
+                end
+        end
+end