summaryrefslogtreecommitdiff
path: root/src/mainboard/roda/rv11
diff options
context:
space:
mode:
authorVagiz Trakhanov <rakkin@autistici.org>2017-09-28 14:21:54 +0000
committerMartin Roth <martinroth@google.com>2017-10-22 02:19:15 +0000
commit17c577153042b6559bf7a9dca6ae9f644b18d770 (patch)
treeee9c3c2381a73e6b9c7d36521a1af1c99aa2c6ac /src/mainboard/roda/rv11
parentc85890d0d8887462e72837c3ae6dd5b6842a81cb (diff)
downloadcoreboot-17c577153042b6559bf7a9dca6ae9f644b18d770.tar.xz
superio/ite/common: Add temperature offset
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
Diffstat (limited to 'src/mainboard/roda/rv11')
-rw-r--r--src/mainboard/roda/rv11/variants/rw11/devicetree.cb4
1 files changed, 2 insertions, 2 deletions
diff --git a/src/mainboard/roda/rv11/variants/rw11/devicetree.cb b/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
index 845bca8183..d5f744e98f 100644
--- a/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
+++ b/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
@@ -113,8 +113,8 @@ chip northbridge/intel/sandybridge
end
end
chip superio/ite/it8783ef
- register "TMPIN1" = "THERMAL_RESISTOR"
- register "TMPIN2" = "THERMAL_RESISTOR"
+ register "TMPIN1.mode" = "THERMAL_RESISTOR"
+ register "TMPIN2.mode" = "THERMAL_RESISTOR"
register "ec.vin_mask" = "VIN_ALL"
register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
register "FAN1.smart.tmpin" = " 1"