summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens/mc_apl1
diff options
context:
space:
mode:
authorMario Scheithauer <mario.scheithauer@siemens.com>2018-11-07 08:50:45 +0100
committerWerner Zeh <werner.zeh@siemens.com>2018-11-12 07:25:42 +0000
commitd985cdc7638967889e586447fb58a9c14bf72c63 (patch)
tree8f9fe99ceb2beb108b4f6c105ddbf2c4a235553e /src/mainboard/siemens/mc_apl1
parentbcbcecd38ff6273bb9e8bf45da8e5f1578a72728 (diff)
downloadcoreboot-d985cdc7638967889e586447fb58a9c14bf72c63.tar.xz
siemens/mc_apl3: Set bus master bit for on-board PCI device
There is an on-board PCI device where bus master has to be enabled in PCI configuration space. As there is no need for a complete PCI driver for this device just set the bus master bit in mainboard_final(). Change-Id: I1ef4a7774d4ca75c230063debbc63d03486fed6f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Diffstat (limited to 'src/mainboard/siemens/mc_apl1')
-rw-r--r--src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c10
1 files changed, 10 insertions, 0 deletions
diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
index bfcf38ef5f..f41fe732f3 100644
--- a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
@@ -15,6 +15,7 @@
#include <bootstate.h>
#include <console/console.h>
+#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <gpio.h>
@@ -31,6 +32,7 @@
void variant_mainboard_final(void)
{
struct device *dev = NULL;
+ uint16_t cmd = 0;
/* PIR6 register mapping for PCIe root ports
* INTA#->PIRQD#, INTB#->PIRQA#, INTC#->PIRQB#, INTD#-> PIRQC#
@@ -52,6 +54,14 @@ void variant_mainboard_final(void)
* offset 0x341C bit [3:0].
*/
pcr_or32(PID_LPC, PCR_LPC_PRC, (PCR_LPC_CCE_EN | PCR_LPC_PCE_EN));
+
+ /* Set Master Enable for on-board PCI device. */
+ dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403e, 0);
+ if (dev) {
+ cmd = pci_read_config16(dev, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER;
+ pci_write_config16(dev, PCI_COMMAND, cmd);
+ }
}
static void wait_for_legacy_dev(void *unused)