summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
diff options
context:
space:
mode:
authorMario Scheithauer <mario.scheithauer@siemens.com>2017-03-29 17:09:37 +0200
committerWerner Zeh <werner.zeh@siemens.com>2017-04-04 06:44:47 +0200
commit956a9f6a9cf0e51c9155738baa566b192897648f (patch)
treec8ba5ccb412bbdc9e0657e58824613bf68cf5b77 /src/mainboard/siemens
parent45ff9cbaa997ddf935cc028beaf66ba9fe0fea56 (diff)
downloadcoreboot-956a9f6a9cf0e51c9155738baa566b192897648f.tar.xz
siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge IC
This mainboard uses a LVDS connection for LCD panels. Apollo Lake SoC provides a display controller with three independent pipes (1x eDP and 2x DP/HDMI). PTN3460 is an embedded DisplayPort to LVDS bridge device that enables connectivity between an eDP source and LVDS display panel (http://www.nxp.com/documents/data_sheet/PTN3460.pdf). The bridge contains an On-chip Extended Display Identification Data (EDIT) emulation for EDIT data structures. This patch sets up PTN3460 to be used with the appropriate LCD panel. Change-Id: Ib8fa79bb608f1842f26c1af3d7bf4bb0513fa94d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/mainboard/siemens')
-rw-r--r--src/mainboard/siemens/mc_apl1/Makefile.inc1
-rw-r--r--src/mainboard/siemens/mc_apl1/mainboard.c19
-rw-r--r--src/mainboard/siemens/mc_apl1/ptn3460.c178
-rw-r--r--src/mainboard/siemens/mc_apl1/ptn3460.h91
4 files changed, 289 insertions, 0 deletions
diff --git a/src/mainboard/siemens/mc_apl1/Makefile.inc b/src/mainboard/siemens/mc_apl1/Makefile.inc
index 21df84c404..223a45f1e7 100644
--- a/src/mainboard/siemens/mc_apl1/Makefile.inc
+++ b/src/mainboard/siemens/mc_apl1/Makefile.inc
@@ -8,3 +8,4 @@ romstage-y += gpio.c
ramstage-y += mainboard.c
ramstage-y += gpio.c
+ramstage-y += ptn3460.c
diff --git a/src/mainboard/siemens/mc_apl1/mainboard.c b/src/mainboard/siemens/mc_apl1/mainboard.c
index 692a076ee6..a15daa913c 100644
--- a/src/mainboard/siemens/mc_apl1/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/mainboard.c
@@ -14,12 +14,15 @@
* GNU General Public License for more details.
*/
+#include <device/pci.h>
#include <device/device.h>
#include <console/console.h>
+#include <soc/pci_devs.h>
#include <string.h>
#include <hwilib.h>
#include <i210.h>
#include "brd_gpio.h"
+#include "ptn3460.h"
#define MAX_PATH_DEPTH 12
#define MAX_NUM_MAPPINGS 10
@@ -108,6 +111,22 @@ static void mainboard_init(void *chip_info)
gpio_configure_pads(pads, num);
}
+static void mainboard_final(void *chip_info)
+{
+ int status;
+
+ /**
+ * Set up the DP2LVDS converter.
+ * ptn3460_init() may only be executed after i2c bus init.
+ */
+ status = ptn3460_init("hwinfo.hex");
+ if (status)
+ printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
+ else
+ printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
+}
+
struct chip_operations mainboard_ops = {
.init = mainboard_init,
+ .final = mainboard_final,
};
diff --git a/src/mainboard/siemens/mc_apl1/ptn3460.c b/src/mainboard/siemens/mc_apl1/ptn3460.c
new file mode 100644
index 0000000000..d63c71cce8
--- /dev/null
+++ b/src/mainboard/siemens/mc_apl1/ptn3460.c
@@ -0,0 +1,178 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014-2017 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <lib.h>
+#include <hwilib.h>
+#include <device/i2c.h>
+#include <soc/i2c.h>
+#include "ptn3460.h"
+
+/**
+ * This function sets up the DP2LVDS-converter to be used with the appropriate
+ * lcd panel.
+ *
+ * @param *hwi_block Filename in CBFS of the block to use as HW-Info.
+ * @return 0 on success or HWI-Data/PTN error code.
+ */
+int ptn3460_init(const char *hwi_block)
+{
+ struct ptn_3460_config cfg;
+ int status;
+ uint8_t disp_con = 0, color_depth = 0;
+ uint8_t edid_data[PTN_EDID_LEN];
+ int i;
+
+ if (!hwi_block || hwilib_find_blocks(hwi_block) != CB_SUCCESS) {
+ printk(BIOS_ERR, "LCD: Info block \"%s\" not found!\n",
+ hwi_block);
+ return 1;
+ }
+ /* Get all needed information from hwinfo block. */
+ if (hwilib_get_field(Edid, edid_data, sizeof(edid_data)) !=
+ sizeof(edid_data)) {
+ printk(BIOS_ERR, "LCD: No EDID data available in %s\n",
+ hwi_block);
+ return 1;
+ }
+ if ((hwilib_get_field(PF_DisplCon, &disp_con, sizeof(disp_con)) !=
+ sizeof(disp_con))) {
+ printk(BIOS_ERR, "LCD: Missing panel features from %s\n",
+ hwi_block);
+ return 1;
+ }
+ if (hwilib_get_field(PF_Color_Depth, &color_depth, sizeof(color_depth))
+ != sizeof(color_depth)) {
+ printk(BIOS_ERR, "LCD: Missing panel features from %s\n",
+ hwi_block);
+ return 1;
+ }
+ /*
+ * Here, all the desired information for setting up DP2LVDS converter
+ * is present. Inside the converter, table 6 will be used for the
+ * timings.
+ */
+ status = ptn3460_write_edid(6, edid_data);
+ if (status)
+ return status;
+ /* Select this table to be emulated. */
+ ptn_select_edid(6);
+ /* Read PTN configuration data. */
+ status = i2c_read_bytes(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
+ PTN_CONFIG_OFF, (uint8_t *)&cfg,
+ sizeof(cfg));
+ if (status)
+ return (PTN_BUS_ERROR | status);
+ /* Set up configuration data according to the hwinfo block we get. */
+ cfg.dp_interface_ctrl = 0;
+ cfg.lvds_interface_ctrl1 = 0x00;
+ if (disp_con == PF_DISPLCON_LVDS_DUAL)
+ /* Turn on dual LVDS lane and clock. */
+ cfg.lvds_interface_ctrl1 |= 0x0b;
+ if (color_depth == PF_COLOR_DEPTH_6BIT)
+ /* Use 18 bits per pixel. */
+ cfg.lvds_interface_ctrl1 |= 0x20;
+
+ /* No clock spreading, 300 mV LVDS swing. */
+ cfg.lvds_interface_ctrl2 = 0x03;
+ /* No LVDS signal swap. */
+ cfg.lvds_interface_ctrl3 = 0x00;
+ /* Delay T2 (VDD to LVDS active) by 16 ms. */
+ cfg.t2_delay = 1;
+ /* 250 ms from LVDS to backlight active. */
+ cfg.t3_timing = 10;
+ /* 1 second re-power delay. */
+ cfg.t12_timing = 20;
+ /* 150 ms backlight off to LVDS inactive. */
+ cfg.t4_timing = 3;
+ /* Delay T5 (LVDS to VDD inactive) by 16 ms. */
+ cfg.t5_delay = 1;
+ /* Enable backlight control. */
+ cfg.backlight_ctrl = 0;
+
+ /* Write back configuration data to PTN3460. */
+ for (i = 0; i < sizeof(struct ptn_3460_config); i++) {
+ status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
+ PTN_CONFIG_OFF+i,
+ *(((uint8_t *)&cfg)+i));
+ if (status)
+ return (PTN_BUS_ERROR | status);
+ }
+
+ /* Read PTN configuration data. */
+ status = i2c_read_bytes(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
+ PTN_CONFIG_OFF, (uint8_t *)&cfg, sizeof(cfg));
+ if (status)
+ return (PTN_BUS_ERROR | status);
+
+ return PTN_NO_ERROR;
+}
+
+/**
+ * This function writes one Extended Display Identification Data (EDID)
+ * structure to PTN3460.
+ *
+ * @param edid_num Number of EDID that must be written (0..6).
+ * @param *data Pointer to a buffer where data to write is stored in.
+ * @return 0 on success or error code.
+ */
+int ptn3460_write_edid(uint8_t edid_num, const uint8_t data[PTN_EDID_LEN])
+{
+ int status;
+ int i;
+
+ if (edid_num > PTN_MAX_EDID_NUM)
+ return PTN_INVALID_EDID;
+
+ /* First enable access to the desired EDID table. */
+ status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
+ PTN_CONFIG_OFF + 5, edid_num);
+ if (status)
+ return (PTN_BUS_ERROR | status);
+
+ /* Now we can simply write EDID-data to ptn3460. */
+ for (i = 0; i < PTN_EDID_LEN; i++) {
+ status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
+ PTN_EDID_OFF + i, data[i]);
+ if (status)
+ return (PTN_BUS_ERROR | status);
+ }
+
+ return PTN_NO_ERROR;
+}
+
+/**
+ * This function selects one of 7 EDID-tables inside PTN3460 which should be
+ * emulated on DisplayPort and turn emulation ON.
+ *
+ * @param edid_num Number of EDID to emulate (0..6).
+ * @return 0 on success or error code.
+ */
+int ptn_select_edid(uint8_t edid_num)
+{
+ int status;
+ uint8_t val;
+
+ if (edid_num > PTN_MAX_EDID_NUM)
+ return PTN_INVALID_EDID;
+ /* Enable emulation of the desired EDID table. */
+ val = (edid_num << 1) | 1;
+ status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
+ PTN_CONFIG_OFF + 4, val);
+ if (status)
+ return (PTN_BUS_ERROR | status);
+ else
+ return PTN_NO_ERROR;
+}
diff --git a/src/mainboard/siemens/mc_apl1/ptn3460.h b/src/mainboard/siemens/mc_apl1/ptn3460.h
new file mode 100644
index 0000000000..db6310bcd2
--- /dev/null
+++ b/src/mainboard/siemens/mc_apl1/ptn3460.h
@@ -0,0 +1,91 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014-2017 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PTN3460_H_
+#define PTN3460_H_
+
+#include <stdint.h>
+
+#define PTN_SLAVE_ADR 0x20
+#define PTN_I2C_CONTROLLER 0
+
+#define PTN_EDID_OFF 0x00
+#define PTN_EDID_LEN 0x80
+#define PTN_CONFIG_OFF 0x80
+#define PTN_FLASH_CFG_OFF 0xE8
+#define PTN_FLASH_CFG_LEN 0x04
+#define PTN_MAX_EDID_NUM 6
+
+/* Define some error codes that can be used. */
+#define PTN_NO_ERROR 0x00000000
+#define PTN_BUS_ERROR 0x10000000
+#define PTN_INVALID_EDID 0x20000000
+
+struct ptn_3460_config {
+ /* DiplayPort interface control. */
+ uint8_t dp_interface_ctrl;
+ /* LVDS interface control register 1. */
+ uint8_t lvds_interface_ctrl1;
+ /* LVDS interface control register 2. */
+ uint8_t lvds_interface_ctrl2;
+ /* LVDS interface control register 3. */
+ uint8_t lvds_interface_ctrl3;
+ /* Select which EDID-block is emulated. */
+ uint8_t edid_rom_emulation;
+ /* Select which EDID block to map to 0..0x7F. */
+ uint8_t edid_rom_access_ctrl;
+ /* Smallest PWM frequency for back light. */
+ uint8_t pwm_min[3];
+ /* Biggest PWM frequency for back light. */
+ uint8_t pwm_max[3];
+ /* Fast link training control register. */
+ uint8_t fast_link_ctrl;
+ /* Pin configuration control register 1. */
+ uint8_t pin_cfg_ctrl1;
+ /* Pin configuration control register 2. */
+ uint8_t pin_cfg_ctrl2;
+ /* Default PWM bit count in DPCD register. */
+ uint8_t pwm_default;
+ /* Current PWM bit count in DPCD register. */
+ uint16_t pwm_value;
+ /* Default PWM frequency in DPCD register. */
+ uint8_t pwm_default_freq;
+ /* Panel T3 timing value. */
+ uint8_t t3_timing;
+ /* Panel T12 timing value. */
+ uint8_t t12_timing;
+ /* Back light control register. */
+ uint8_t backlight_ctrl;
+ /* Panel T2 delay. */
+ uint8_t t2_delay;
+ /* Panel T4 timing value. */
+ uint8_t t4_timing;
+ /* Panel T5 delay. */
+ uint8_t t5_delay;
+} __attribute__((packed));
+
+struct ptn_3460_flash {
+ /* Flash command (erase or erase and flash). */
+ uint8_t cmd;
+ /* Magic number needed by the flash algorithm. */
+ uint16_t magic;
+ /* Trigger for starting flash operation. */
+ uint8_t trigger;
+} __attribute__((packed));
+
+int ptn3460_init(const char *hwi_block);
+int ptn3460_write_edid(uint8_t edid_num, const uint8_t data[PTN_EDID_LEN]);
+int ptn_select_edid(uint8_t edid_num);
+#endif /* PTN3460_H_ */