mainboard: Update mainboards using the w83795 sensor device

Update mainboards using the w83795 sensor device with sane default
values.  Note that in some cases the defaults may vary from the
defaults provided by the old driver, for example the default fan
speeds and control modes have changed as I do not have any information
on the correct sensor to fan mappings for these boards.

Change-Id: Id2ad6222d7a0f29483b022fa097d7d098c6b4122
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12124
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>

1 files changed, 89 insertions, 0 deletions

diff --git a/src/mainboard/supermicro/h8scm/devicetree.cb b/src/mainboard/supermicro/h8scm/devicetree.cb
index b8fb82335b..a280e623ac 100644
--- a/src/mainboard/supermicro/h8scm/devicetree.cb
+++ b/src/mainboard/supermicro/h8scm/devicetree.cb
@@ -106,6 +106,95 @@ chip northbridge/amd/agesa/family15/root_complex
 							end
 						end #superio/winbond/w83627dhg
 						chip drivers/i2c/w83795
+							register "fanin_ctl1" = "0xff"			# Enable monitoring of FANIN1 - FANIN8
+							register "fanin_ctl2" = "0x00"			# Connect FANIN11 - FANIN14 to alternate functions
+							register "temp_ctl1" = "0x2a"			# Enable monitoring of DTS, VSEN12, and VSEN13
+							register "temp_ctl2" = "0x01"			# Enable monitoring of TD1/TR1
+							register "temp_dtse" = "0x03"			# Enable DTS1 and DTS2
+							register "volt_ctl1" = "0xff"			# Enable monitoring of VSEN1 - VSEN8
+							register "volt_ctl2" = "0xf7"			# Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
+							register "temp1_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp1)
+							register "temp2_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp2)
+							register "temp3_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp3)
+							register "temp4_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp4)
+							register "temp5_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp5)
+							register "temp6_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp6)
+							register "temp1_source_select" = "0x00"		# Use TD1/TR1 as data source for Temp1
+							register "temp2_source_select" = "0x00"		# Use TD2/TR2 as data source for Temp2
+							register "temp3_source_select" = "0x00"		# Use TD3/TR3 as data source for Temp3
+							register "temp4_source_select" = "0x00"		# Use TD4/TR4 as data source for Temp4
+							register "temp5_source_select" = "0x00"		# Use TR5 as data source for Temp5
+							register "temp6_source_select" = "0x00"		# Use TR6 as data source for Temp6
+							register "tr1_critical_temperature" = "85"	# Set TD1/TR1 critical temperature to 85°C
+							register "tr1_critical_hysteresis" = "80"	# Set TD1/TR1 critical hysteresis temperature to 80°C
+							register "tr1_warning_temperature" = "70"	# Set TD1/TR1 warning temperature to 70°C
+							register "tr1_warning_hysteresis" = "65"	# Set TD1/TR1 warning hysteresis temperature to 65°C
+							register "dts_critical_temperature" = "85"	# Set DTS (CPU) critical temperature to 85°C
+							register "dts_critical_hysteresis" = "80"	# Set DTS (CPU) critical hysteresis temperature to 80°C
+							register "dts_warning_temperature" = "70"	# Set DTS (CPU) warning temperature to 70°C
+							register "dts_warning_hysteresis" = "65"	# Set DTS (CPU) warning hysteresis temperature to 65°C
+							register "temp1_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
+							register "temp2_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
+							register "temp3_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
+							register "temp4_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
+							register "temp5_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
+							register "temp6_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
+							register "temp1_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
+							register "temp2_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
+							register "temp3_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
+							register "temp4_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
+							register "temp5_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
+							register "temp6_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
+							register "fan1_nonstop" = "7"			# Set Fan 1 minimum speed
+							register "fan2_nonstop" = "7"			# Set Fan 2 minimum speed
+							register "fan3_nonstop" = "7"			# Set Fan 3 minimum speed
+							register "fan4_nonstop" = "7"			# Set Fan 4 minimum speed
+							register "fan5_nonstop" = "7"			# Set Fan 5 minimum speed
+							register "fan6_nonstop" = "7"			# Set Fan 6 minimum speed
+							register "fan7_nonstop" = "7"			# Set Fan 7 minimum speed
+							register "fan8_nonstop" = "7"			# Set Fan 8 minimum speed
+							register "default_speed" = "100"		# All fans to full speed on power up
+							register "fan1_duty" = "100"			# Fan 1 to full speed
+							register "fan2_duty" = "100"			# Fan 2 to full speed
+							register "fan3_duty" = "100"			# Fan 3 to full speed
+							register "fan4_duty" = "100"			# Fan 4 to full speed
+							register "fan5_duty" = "100"			# Fan 5 to full speed
+							register "fan6_duty" = "100"			# Fan 6 to full speed
+							register "fan7_duty" = "100"			# Fan 7 to full speed
+							register "fan8_duty" = "100"			# Fan 8 to full speed
+							register "vcore1_high_limit_mv" = "1500"	# VCORE1 (Node 0) high limit to 1.5V
+							register "vcore1_low_limit_mv" = "900"		# VCORE1 (Node 0) low limit to 0.9V
+							register "vcore2_high_limit_mv" = "1500"	# VCORE2 (Node 1) high limit to 1.5V
+							register "vcore2_low_limit_mv" = "900"		# VCORE2 (Node 1) low limit to 0.9V
+							register "vsen3_high_limit_mv" = "1600"		# VSEN1 (Node 0 RAM voltage) high limit to 1.6V
+							register "vsen3_low_limit_mv" = "1100"		# VSEN1 (Node 0 RAM voltage) low limit to 1.1V
+							register "vsen4_high_limit_mv" = "1600"		# VSEN2 (Node 1 RAM voltage) high limit to 1.6V
+							register "vsen4_low_limit_mv" = "1100"		# VSEN2 (Node 1 RAM voltage) low limit to 1.1V
+							register "vsen5_high_limit_mv" = "1250"		# VSEN5 (Node 0 HT link voltage) high limit to 1.25V
+							register "vsen5_low_limit_mv" = "1150"		# VSEN5 (Node 0 HT link voltage) low limit to 1.15V
+							register "vsen6_high_limit_mv" = "1250"		# VSEN6 (Node 1 HT link voltage) high limit to 1.25V
+							register "vsen6_low_limit_mv" = "1150"		# VSEN6 (Node 1 HT link voltage) low limit to 1.15V
+							register "vsen7_high_limit_mv" = "1150"		# VSEN7 (Northbridge core voltage) high limit to 1.15V
+							register "vsen7_low_limit_mv" = "1050"		# VSEN7 (Northbridge core voltage) low limit to 1.05V
+							register "vsen8_high_limit_mv" = "1900"		# VSEN8 (+1.8V) high limit to 1.9V
+							register "vsen8_low_limit_mv" = "1700"		# VSEN8 (+1.8V) low limit to 1.7V
+							register "vsen9_high_limit_mv" = "1250"		# VSEN9 (+1.2V) high limit to 1.25V
+							register "vsen9_low_limit_mv" = "1150"		# VSEN9 (+1.2V) low limit to 1.15V
+							register "vsen10_high_limit_mv" = "1150"	# VSEN10 (+1.1V) high limit to 1.15V
+							register "vsen10_low_limit_mv" = "1050"		# VSEN10 (+1.1V) low limit to 1.05V
+							register "vsen11_high_limit_mv" = "1625"	# VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
+							register "vsen11_low_limit_mv" = "1500"		# VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
+							register "vsen12_high_limit_mv" = "1083"	# VSEN12 (+12V, scaling factor ~12) high limit to 13V
+							register "vsen12_low_limit_mv" = "917"		# VSEN12 (+12V, scaling factor ~12) low limit to 11V
+							register "vsen13_high_limit_mv" = "1625"	# VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
+							register "vsen13_low_limit_mv" = "1500"		# VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
+							register "vdd_high_limit_mv" = "3500"		# 3VDD high limit to 3.5V
+							register "vdd_low_limit_mv" = "3100"		# 3VDD low limit to 3.1V
+							register "vsb_high_limit_mv" = "3500"		# 3VSB high limit to 3.5V
+							register "vsb_low_limit_mv" = "3100"		# 3VSB low limit to 3.1V
+							register "vbat_high_limit_mv" = "3500"		# VBAT (+3V) high limit to 3.5V
+							register "vbat_low_limit_mv" = "2500"		# VBAT (+3V) low limit to 2.5V
+							register "smbus_aux" = "0"			# Device located on primary SMBUS
 							device pnp 5e on #hwm
 							end
 						end #drivers/i2c/w83795