printk_foo -> printk(BIOS_FOO, ...)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

6 files changed, 37 insertions, 37 deletions

diff --git a/src/mainboard/technexion/tim5690/acpi_tables.c b/src/mainboard/technexion/tim5690/acpi_tables.c
index f450b7c4bf..b77a3bd507 100644
--- a/src/mainboard/technexion/tim5690/acpi_tables.c
+++ b/src/mainboard/technexion/tim5690/acpi_tables.c
@@ -49,9 +49,9 @@ static void dump_mem(u32 start, u32 end)
 	print_debug("dump_mem:");
 	for (i = start; i < end; i++) {
 		if ((i & 0xf) == 0) {
-			printk_debug("\n%08x:", i);
+			printk(BIOS_DEBUG, "\n%08x:", i);
 		}
-		printk_debug(" %02x", (u8)*((u8 *)i));
+		printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
 	}
 	print_debug("\n");
 }
@@ -147,7 +147,7 @@ unsigned long write_acpi_tables(unsigned long start)
 	start = (start + 0x0f) & -0x10;
 	current = start;
 
-	printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
 
 	/* We need at least an RSDP and an RSDT Table */
 	rsdp = (acpi_rsdp_t *) current;
@@ -165,13 +165,13 @@ unsigned long write_acpi_tables(unsigned long start)
 	 * We explicitly add these tables later on:
 	 */
 	/* If we want to use HPET Timers Linux wants an MADT */
-	printk_debug("ACPI:    * HPET\n");
+	printk(BIOS_DEBUG, "ACPI:    * HPET\n");
 	hpet = (acpi_hpet_t *) current;
 	current += sizeof(acpi_hpet_t);
 	acpi_create_hpet(hpet);
 	acpi_add_table(rsdp, hpet);
 
-	printk_debug("ACPI:    * MADT\n");
+	printk(BIOS_DEBUG, "ACPI:    * MADT\n");
 	madt = (acpi_madt_t *) current;
 	acpi_create_madt(madt);
 	current += madt->header.length;
@@ -179,14 +179,14 @@ unsigned long write_acpi_tables(unsigned long start)
 
 #if 0
 	/* SRAT */
-	printk_debug("ACPI:    * SRAT\n");
+	printk(BIOS_DEBUG, "ACPI:    * SRAT\n");
 	srat = (acpi_srat_t *) current;
 	acpi_create_srat(srat);
 	current += srat->header.length;
 	acpi_add_table(rsdp, srat);
 
 	/* SLIT */
-	printk_debug("ACPI:    * SLIT\n");
+	printk(BIOS_DEBUG, "ACPI:    * SLIT\n");
 	slit = (acpi_slit_t *) current;
 	acpi_create_slit(slit);
 	current += slit->header.length;
@@ -194,7 +194,7 @@ unsigned long write_acpi_tables(unsigned long start)
 #endif
 
 	/* SSDT */
-	printk_debug("ACPI:    * SSDT\n");
+	printk(BIOS_DEBUG, "ACPI:    * SSDT\n");
 	ssdt = (acpi_header_t *)current;
 
 	acpi_create_ssdt_generator(ssdt, "DYNADATA");
@@ -214,7 +214,7 @@ unsigned long write_acpi_tables(unsigned long start)
 		} else {
 			c = (uint8_t) ('A' + i - 1 - 6);
 		}
-		printk_debug("ACPI:    * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]);	/* pci0 and pci1 are in dsdt */
+		printk(BIOS_DEBUG, "ACPI:    * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]);	/* pci0 and pci1 are in dsdt */
 		current = (current + 0x07) & -0x08;
 		ssdtx = (acpi_header_t *) current;
 		switch (sysconf.hcid[i]) {
@@ -243,20 +243,20 @@ unsigned long write_acpi_tables(unsigned long start)
 #endif
 
 	/* FACS */
-	printk_debug("ACPI:    * FACS\n");
+	printk(BIOS_DEBUG, "ACPI:    * FACS\n");
 	facs = (acpi_facs_t *) current;
 	current += sizeof(acpi_facs_t);
 	acpi_create_facs(facs);
 
 	/* DSDT */
-	printk_debug("ACPI:    * DSDT\n");
+	printk(BIOS_DEBUG, "ACPI:    * DSDT\n");
 	dsdt = (acpi_header_t *) current;
 	memcpy((void *)dsdt, (void *)AmlCode,
 	       ((acpi_header_t *) AmlCode)->length);
 	current += dsdt->length;
-	printk_debug("ACPI:    * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n", dsdt, dsdt->length);
 	/* FADT */
-	printk_debug("ACPI:    * FADT\n");
+	printk(BIOS_DEBUG, "ACPI:    * FADT\n");
 	fadt = (acpi_fadt_t *) current;
 	current += sizeof(acpi_fadt_t);
 
@@ -264,28 +264,28 @@ unsigned long write_acpi_tables(unsigned long start)
 	acpi_add_table(rsdp, fadt);
 
 #if DUMP_ACPI_TABLES == 1
-	printk_debug("rsdp\n");
+	printk(BIOS_DEBUG, "rsdp\n");
 	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
 
-	printk_debug("rsdt\n");
+	printk(BIOS_DEBUG, "rsdt\n");
 	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
 
-	printk_debug("madt\n");
+	printk(BIOS_DEBUG, "madt\n");
 	dump_mem(madt, ((void *)madt) + madt->header.length);
 
-	printk_debug("srat\n");
+	printk(BIOS_DEBUG, "srat\n");
 	dump_mem(srat, ((void *)srat) + srat->header.length);
 
-	printk_debug("slit\n");
+	printk(BIOS_DEBUG, "slit\n");
 	dump_mem(slit, ((void *)slit) + slit->header.length);
 
-	printk_debug("ssdt\n");
+	printk(BIOS_DEBUG, "ssdt\n");
 	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
 
-	printk_debug("fadt\n");
+	printk(BIOS_DEBUG, "fadt\n");
 	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
 #endif
 
-	printk_info("ACPI: done.\n");
+	printk(BIOS_INFO, "ACPI: done.\n");
 	return current;
 }
diff --git a/src/mainboard/technexion/tim5690/fadt.c b/src/mainboard/technexion/tim5690/fadt.c
index e7bc017bbd..5d28790b4d 100644
--- a/src/mainboard/technexion/tim5690/fadt.c
+++ b/src/mainboard/technexion/tim5690/fadt.c
@@ -46,7 +46,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 	acpi_header_t *header = &(fadt->header);
 
 	pm_base &= 0xFFFF;
-	printk_debug("pm_base: 0x%04x\n", pm_base);
+	printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base);
 
 	/* Prepare the header */
 	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
diff --git a/src/mainboard/technexion/tim5690/irq_tables.c b/src/mainboard/technexion/tim5690/irq_tables.c
index 38479aac14..8457745724 100644
--- a/src/mainboard/technexion/tim5690/irq_tables.c
+++ b/src/mainboard/technexion/tim5690/irq_tables.c
@@ -73,7 +73,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	addr &= ~15;
 
 	/* This table must be betweeen 0xf0000 & 0x100000 */
-	printk_info("Writing IRQ routing tables to 0x%lx...", addr);
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
 
 	pirq = (void *)(addr);
 	v = (u8 *) (addr);
@@ -113,7 +113,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 		pirq->checksum = sum;
 	}
 
-	printk_info("write_pirq_routing_table done.\n");
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
 
 	return (unsigned long)pirq_info;
 }
diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c
index 8ca3f4c8f5..25e9e07e29 100644
--- a/src/mainboard/technexion/tim5690/mainboard.c
+++ b/src/mainboard/technexion/tim5690/mainboard.c
@@ -146,7 +146,7 @@ static void set_thermal_config(void)
 
 	byte = ADT7461_read_byte(0x02);	/* read status register to clear it */
 	ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
-	printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
+	printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
 
 	/* sb600 settings for thermal config */
 	/* set SB600 GPIO 64 to GPIO with pull-up */
@@ -245,7 +245,7 @@ void tim5690_enable(device_t dev)
 	u16 gpio_base = IT8712F_SIMPLE_IO_BASE;
 	u8 port2;
 
-	printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev);
+	printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev);
 
 	mb_gpio_init(&gpio_base);
 
@@ -261,12 +261,12 @@ void tim5690_enable(device_t dev)
 
 	/* TOP_MEM: the top of DRAM below 4G */
 	msr = rdmsr(TOP_MEM);
-	printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+	printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
 		    __func__, msr.lo, msr.hi);
 
 	/* TOP_MEM2: the top of DRAM above 4G */
 	msr2 = rdmsr(TOP_MEM2);
-	printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+	printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
 		    __func__, msr2.lo, msr2.hi);
 
 	switch (msr.lo) {
@@ -288,7 +288,7 @@ void tim5690_enable(device_t dev)
 	}
 
 	uma_memory_base = msr.lo - uma_memory_size;	/* TOP_MEM1 */
-	printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n",
+	printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
 		    __func__, uma_memory_size, uma_memory_base);
 
 	/* TODO: TOP_MEM2 */
@@ -306,7 +306,7 @@ int add_mainboard_resources(struct lb_memory *mem)
 	 * in some circumstances we want the memory mentioned as reserved.
  	 */
 #if (CONFIG_GFXUMA == 1)
-	printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
+	printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
 	uma_memory_base, uma_memory_size);
 	lb_add_memory_range(mem, LB_MEM_RESERVED,
 		uma_memory_base, uma_memory_size);
diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c
index ee4a2ff761..a918dac675 100644
--- a/src/mainboard/technexion/tim5690/mptable.c
+++ b/src/mainboard/technexion/tim5690/mptable.c
@@ -199,7 +199,7 @@ void *smp_write_config_table(void *v)
 	mc->mpe_checksum =
 	    smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
 	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
-	printk_debug("Wrote the mp table end at: %p - %p\n",
+	printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
 		     mc, smp_next_mpe_entry(mc));
 	return smp_next_mpe_entry(mc);
 }
diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c
index 2cd8ebec5b..1546233bf0 100644
--- a/src/mainboard/technexion/tim5690/romstage.c
+++ b/src/mainboard/technexion/tim5690/romstage.c
@@ -141,7 +141,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
-	printk_debug("bsp_apicid=0x%x\n", bsp_apicid);
+	printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid);
 
 	setup_tim5690_resource_map();
 
@@ -167,7 +167,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 		/* Read FIDVID_STATUS */
 		msr=rdmsr(0xc0010042);
-		printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+		printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
 
 		enable_fid_change();
 		enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
@@ -175,16 +175,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 		/* show final fid and vid */
 		msr=rdmsr(0xc0010042);
-		printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+		printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
 
 	} else {
-		printk_debug("Changing FIDVID not supported\n");
+		printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
 	}
 
 	needs_reset = optimize_link_coherent_ht();
 	needs_reset |= optimize_link_incoherent_ht(sysinfo);
 	rs690_htinit();
-	printk_debug("needs_reset=0x%x\n", needs_reset);
+	printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset);
 
 
 	if (needs_reset) {
@@ -198,7 +198,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	allow_all_aps_stop(bsp_apicid);
 
 	/* It's the time to set ctrl now; */
-	printk_debug("sysinfo->nodes: %2x  sysinfo->ctrl: %2x  spd_addr: %2x\n",
+	printk(BIOS_DEBUG, "sysinfo->nodes: %2x  sysinfo->ctrl: %2x  spd_addr: %2x\n",
 		     sysinfo->nodes, sysinfo->ctrl, spd_addr);
 
 	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);