Daniel Toussaint wrote:

As I mentioned a few weeks ago, I am in the process of porting this board:

http://www.technexion.com/products/embedded_boards/tim-8690-mt.html

This board has a dual BIOS , choosable with a jumper - much like the BIOS
savier from before - so it is a pleasure to work with as a linuxbios developer.

It is still a work in progress, however , I already submit the patch.
All on board devices and slots work as expected, only need some more stress
testing with the RAM, acpi, etc..

Signed-off-by: Daniel Toussaint <daniel@dmhome.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4075 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 312 insertions, 0 deletions

diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb
new file mode 100644
index 0000000000..9e3ebe7fd4
--- /dev/null
+++ b/src/mainboard/technexion/tim8690/Config.lb
@@ -0,0 +1,312 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+##
+##
+
+
+##
+## Compute the location and size of where this firmware image
+## (coreboot plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+	default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The coreboot bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of coreboot will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up coreboot,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+#dir /drivers/si/3114
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE
+	object get_bus_conf.o
+	object irq_tables.o
+end
+
+if HAVE_ACPI_TABLES
+	object acpi_tables.o
+	object fadt.o
+	makerule dsdt.c
+		depends "$(MAINBOARD)/acpi/*.asl"
+		action  "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/acpi/dsdt.asl"
+		action  "mv dsdt.hex dsdt.c"
+	end
+	object ./dsdt.o
+end
+
+#object reset.o
+
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT
+
+		makerule ./cache_as_ram_auto.o
+			depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+		end
+
+	else
+
+		makerule ./cache_as_ram_auto.inc
+			depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall $(DEBUG_CFLAGS) -c -S -o $@"
+			action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+			action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
+		end
+
+	end
+
+end
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+if USE_DCACHE_RAM
+	if CONFIG_USE_INIT
+		ldscript /cpu/x86/32bit/entry32.lds
+	end
+
+	if CONFIG_USE_INIT
+		ldscript      /cpu/amd/car/cache_as_ram.lds
+	end
+end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+if USE_DCACHE_RAM
+	##
+	## Setup Cache-As-Ram
+	##
+	mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover.lds
+	else
+		ldscript /arch/i386/lib/failover.lds
+		mainboardinit ./failover.inc
+	end
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT
+		initobject cache_as_ram_auto.o
+	else
+		mainboardinit ./cache_as_ram_auto.inc
+	end
+
+end
+
+##
+## Include the secondary Configuration files
+##
+config chip.h
+
+#The variables belong to mainboard are defined here.
+
+#Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
+#Define vga_rom_address = 0xfff80000
+#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+#					   1: the system allows a PCIE link to be established on Dev2 or Dev3.
+#Define gfx_dual_slot, 0: single slot, 1: dual slot
+#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
+#Define gfx_tmds, 0: didn't support TMDS, 1: support
+#Define gfx_compliance, 0: didn't support compliance, 1: support
+#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
+#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
+chip northbridge/amd/amdk8/root_complex
+	device apic_cluster 0 on
+		chip cpu/amd/socket_S1G1
+		device apic 0 on end
+		end
+	end
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8
+			device pci 18.0 on #  southbridge
+				chip southbridge/amd/rs690
+					device pci 0.0 on end # HT  	0x7910
+					device pci 1.0 on  # Internal Graphics P2P bridge 0x7912
+						chip drivers/pci/onboard
+							device pci 5.0 on end	# Internal Graphics 0x791F
+							register "rom_address" = "0xfff80000"
+						end
+					end
+					device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
+					device pci 3.0 off end # PCIE P2P bridge	0x791b
+					device pci 4.0 on end # PCIE P2P bridge 0x7914
+					device pci 5.0 on end # PCIE P2P bridge 0x7915
+					device pci 6.0 on end # PCIE P2P bridge 0x7916
+					device pci 7.0 on end # PCIE P2P bridge 0x7917
+					device pci 8.0 off end # NB/SB Link P2P bridge
+					register "vga_rom_address" = "0xfff80000"
+					register "gpp_configuration" = "4"
+					register "port_enable" = "0xfc"
+					register "gfx_dev2_dev3" = "1"
+					register "gfx_dual_slot" = "0"
+					register "gfx_lane_reversal" = "0"
+					register "gfx_tmds" = "0"
+					register "gfx_compliance" = "0"
+					register "gfx_reconfiguration" = "1"
+					register "gfx_link_width" = "0"
+				end
+				chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
+					device pci 12.0 on end # SATA  0x4380
+					device pci 13.0 on end # USB   0x4387
+					device pci 13.1 on end # USB   0x4388
+					device pci 13.2 on end # USB   0x4389
+					device pci 13.3 on end # USB   0x438a
+					device pci 13.4 on end # USB   0x438b
+					device pci 13.5 on end # USB 2 0x4386
+	 				device pci 14.0 on # SM        0x4385
+						chip drivers/generic/generic #dimm 0-0-0
+							device i2c 50 on end
+						end
+						chip drivers/generic/generic #dimm 0-0-1
+							device i2c 51 on end
+						end
+						chip drivers/generic/generic #dimm 0-1-0
+							device i2c 52 on end
+						end
+						chip drivers/generic/generic #dimm 0-1-1
+							device i2c 53 on end
+						end
+					end # SM
+					device pci 14.1 on end # IDE    0x438c
+					device pci 14.2 on end # HDA    0x4383
+					device pci 14.3 on # LPC	0x438d
+						chip superio/ite/it8712f
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 on #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.2 off #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							device pnp 2e.3 off #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.4 off end #  EC
+							device pnp 2e.5 on #  Keyboard
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 1
+							end
+							device pnp 2e.6 on #  Mouse
+								irq 0x70 = 12
+							end
+							device pnp 2e.7 off #  GPIO, must be closed for unresolved reason.
+							end
+							device pnp 2e.8 off #  MIDI
+								io 0x60 = 0x300
+								irq 0x70 = 9
+							end
+							device pnp 2e.9 off #  GAME
+								io 0x60 = 0x220
+							end
+							device pnp 2e.a off end #  CIR
+						end	#superio/ite/it8712f
+					end		#LPC
+					device pci 14.4 on end # PCI 0x4384
+					device pci 14.5 on end # ACI 0x4382
+					device pci 14.6 on end # MCI 0x438e
+					register "ide0_enable" = "1"
+					register "sata0_enable" = "1"
+					register "hda_viddid" = "0x10ec0882"
+				end	#southbridge/amd/sb600
+			end #  device pci 18.0
+
+			device pci 18.0 on end
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end		#northbridge/amd/amdk8
+	end #pci_domain
+end		#northbridge/amd/amdk8/root_complex
+