Drop SC520 and related boards

There is no Cache As Ram for these boards, let's get rid of them.

Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

Change-Id: Ia70befc59708c360ad02ed7e3a49d3b0f95dc707
Reviewed-on: http://review.coreboot.org/7119
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

7 files changed, 0 insertions, 449 deletions

diff --git a/src/mainboard/technologic/ts5300/Kconfig b/src/mainboard/technologic/ts5300/Kconfig
deleted file mode 100644
index 0006fd7903..0000000000
--- a/src/mainboard/technologic/ts5300/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if BOARD_TECHNOLOGIC_TS5300
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_AMD_SC520
-	select ROMCC
-	select HAVE_OPTION_TABLE
-	select HAVE_PIRQ_TABLE
-	select BOARD_ROMSIZE_KB_1024
-
-config MAINBOARD_DIR
-	string
-	default technologic/ts5300
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "TS-5300"
-
-config IRQ_SLOT_COUNT
-	int
-	default 2
-
-endif # BOARD_TECHNOLOGIC_TS5300
diff --git a/src/mainboard/technologic/ts5300/board_info.txt b/src/mainboard/technologic/ts5300/board_info.txt
deleted file mode 100644
index ef8a731821..0000000000
--- a/src/mainboard/technologic/ts5300/board_info.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Category: half
-Board URL: http://www.embeddedarm.com/epc/ts5300-spec-h.html
diff --git a/src/mainboard/technologic/ts5300/cmos.layout b/src/mainboard/technologic/ts5300/cmos.layout
deleted file mode 100644
index 9050c3db7a..0000000000
--- a/src/mainboard/technologic/ts5300/cmos.layout
+++ /dev/null
@@ -1,72 +0,0 @@
-entries
-
-#start-bit length  config config-ID    name
-#0            8       r       0        seconds
-#8            8       r       0        alarm_seconds
-#16           8       r       0        minutes
-#24           8       r       0        alarm_minutes
-#32           8       r       0        hours
-#40           8       r       0        alarm_hours
-#48           8       r       0        day_of_week
-#56           8       r       0        day_of_month
-#64           8       r       0        month
-#72           8       r       0        year
-#80           4       r       0        rate_select
-#84           3       r       0        REF_Clock
-#87           1       r       0        UIP
-#88           1       r       0        auto_switch_DST
-#89           1       r       0        24_hour_mode
-#90           1       r       0        binary_values_enable
-#91           1       r       0        square-wave_out_enable
-#92           1       r       0        update_finished_enable
-#93           1       r       0        alarm_interrupt_enable
-#94           1       r       0        periodic_interrupt_enable
-#95           1       r       0        disable_clock_updates
-#96         288       r       0        temporary_filler
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-385          1       e       4        last_boot
-386          1       e       1        ECC_memory
-388          4       r       0        reboot_bits
-392          3       e       5        baud_rate
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-416          4       e       7        boot_first
-420          4       e       7        boot_second
-424          4       e       7        boot_third
-428          4       h       0        boot_index
-432          8       h       0        boot_countdown
-1008         16      h       0        check_sum
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-5     0     115200
-5     1     57600
-5     2     38400
-5     3     19200
-5     4     9600
-5     5     4800
-5     6     2400
-5     7     1200
-6     6     Notice
-6     7     Info
-6     8     Debug
-6     9     Spew
-7     0     Network
-7     1     HDD
-7     2     Floppy
-7     8     Fallback_Network
-7     9     Fallback_HDD
-7     10    Fallback_Floppy
-#7     3     ROM
-
-checksums
-
-checksum 392 1007 1008
diff --git a/src/mainboard/technologic/ts5300/devicetree.cb b/src/mainboard/technologic/ts5300/devicetree.cb
deleted file mode 100644
index 6c83e208ab..0000000000
--- a/src/mainboard/technologic/ts5300/devicetree.cb
+++ /dev/null
@@ -1,6 +0,0 @@
-chip cpu/amd/sc520
-	device domain 0 on
-		device pci 0.0 on end
-	end
-
-end
diff --git a/src/mainboard/technologic/ts5300/irq_tables.c b/src/mainboard/technologic/ts5300/irq_tables.c
deleted file mode 100644
index 15dcddde12..0000000000
--- a/src/mainboard/technologic/ts5300/irq_tables.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
-   (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,  /* u32 signature */
-	PIRQ_VERSION,    /* u16 version   */
-	32+16*CONFIG_IRQ_SLOT_COUNT,	 /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
-	0x00,		 /* Where the interrupt router lies (bus) */
-	(0x00<<3)|0x0,   /* Where the interrupt router lies (dev) */
-	0,		 /* IRQs devoted exclusively to PCI usage */
-	0x8086,		 /* Vendor */
-	0x122e,		 /* Device */
-	0,		 /* Miniport data */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
-	0x50,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
-	{
-		/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
-		{0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0},
-		{0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0},
-	}
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-        return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c
deleted file mode 100644
index 20b893ef71..0000000000
--- a/src/mainboard/technologic/ts5300/mainboard.c
+++ /dev/null
@@ -1,147 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <cpu/amd/sc520.h>
-
-
-#if 0
-static void irqdump(void)
-{
-  volatile unsigned char *irq;
-  void *mmcr;
-
-
-  int i;
-  int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
-	        0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
-		0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
-		0xd30, 0xd31, 0xd32, 0xd33,
-		0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
-		0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
-		-1};
-  mmcr = (void *) 0xfffef000;
-
-  printk(BIOS_ERR, "mmcr is %p\n", mmcr);
-  for(i = 0; irqlist[i] >= 0; i++) {
-    irq = mmcr + irqlist[i];
-    printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq);
-  }
-
-}
-#endif
-
-/* TODO: finish up mmcr struct in sc520.h, and;
-   - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
-*/
-static void mainboard_enable(struct device *dev)
-{
-	volatile struct mmcr *mmcr = MMCRDEFAULT;
-
-	/* currently, nothing in the device to use, so ignore it. */
-	printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__);
-
-	/* from fuctory bios */
-	/* NOTE: the following interrupt settings made interrupts work
-	 * for hard drive, and serial, but not for ethernet
-	 */
-
-	printk(BIOS_ERR, "Setting up PIC\n");
-	/* just do what they say and nobody gets hurt. */
-	mmcr->pic.pcicr = 0 ;
-	/* all ints to level */
-	mmcr->pic.mpicmode = 0;
-	mmcr->pic.sl1picmode = 0;
-	mmcr->pic.sl2picmode = 0;
-
-	mmcr->pic.intpinpol = 0x100;
-
-	mmcr->pic.pit0map = 1;
-	mmcr->pic.uart1map = 0x0c;
-	mmcr->pic.uart2map = 0x0b;
-	mmcr->pic.rtcmap  = 0x03;
-	mmcr->pic.ferrmap = 0x00;
-	mmcr->pic.intpinpol = 0x100;
-
-	mmcr->pic.gp0imap = 0x00;
-	mmcr->pic.gp1imap = 0x02;
-	mmcr->pic.gp2imap = 0x07;
-	mmcr->pic.gp3imap = 0x05;
-	mmcr->pic.gp4imap = 0x06;
-	mmcr->pic.gp5imap = 0x0d;
-	mmcr->pic.gp6imap = 0x15;
-	mmcr->pic.gp7imap = 0x16;
-	mmcr->pic.gp8imap = 0x3;
-	mmcr->pic.gp9imap = 0x4;
-	mmcr->pic.gp10imap = 0x9;
-
-	// irqdump();
-
-	printk(BIOS_ERR, "Setting up sysarb\n");
-	mmcr->dbctl.dbctl = 0x01;
-	mmcr->sysarb.ctl = 0x00;
-	mmcr->sysarb.menb = 0x1f;
-	mmcr->sysarb.prictl = 0x40000f0f;
-
-	/* this is bios setting, depends on sysarb above */
-	mmcr->hostbridge.ctl = 0x0;
-	mmcr->hostbridge.tgtirqctl = 0x0;
-	mmcr->hostbridge.tgtirqsta = 0xf00;
-	mmcr->hostbridge.mstirqctl = 0x0;
-	mmcr->hostbridge.mstirqsta = 0x708;
-
-	printk(BIOS_ERR, "Setting up pio\n");
-	/* pio */
-	mmcr->pio.pfs15_0 = 0xffff;
-	mmcr->pio.pfs31_16 = 0xffff;
-	mmcr->pio.cspfs = 0xfe;
-	mmcr->pio.clksel = 0x13;
-	mmcr->pio.dsctl = 0x200;
-	mmcr->pio.data15_0 = 0xde04;
-	mmcr->pio.data31_16 = 0xef9f;
-
-	printk(BIOS_ERR, "Setting up sysmap\n");
-	/* system memory map */
-	mmcr->sysmap.adddecctl = 0x04;
-	mmcr->sysmap.wpvsta = 0x8006;
-	mmcr->sysmap.par[1] = 0x340f0070;
-	mmcr->sysmap.par[2] = 0x380701f0;
-	mmcr->sysmap.par[3] = 0x3c0103f6;
-	mmcr->sysmap.par[4] = 0x2c0f0300;
-	mmcr->sysmap.par[5] = 0x447c00a0;
-	mmcr->sysmap.par[6] = 0xe600000c;
-	mmcr->sysmap.par[7] = 0x300046e8;
-	mmcr->sysmap.par[8] = 0x500400d0;
-	mmcr->sysmap.par[9] = 0x281f0140;
-	mmcr->sysmap.par[13] = 0x8a07c940;
-	mmcr->sysmap.par[15] = 0xee00400e;
-
-	printk(BIOS_ERR, "Setting up gpctl\n");
-	mmcr->gpctl.gpcsrt = 0x01;
-	mmcr->gpctl.gpcspw = 0x09;
-	mmcr->gpctl.gpcsoff = 0x01;
-	mmcr->gpctl.gprdw = 0x07;
-	mmcr->gpctl.gprdoff = 0x02;
-	mmcr->gpctl.gpwrw = 0x07;
-	mmcr->gpctl.gpwroff = 0x02;
-
-	//mmcr->reset.sysinfo = 0xdf;
-	//mmcr->reset.rescfg = 0x5;
-	/* their IRQ table is wrong. Just hardwire it */
-	//{
-	//  char pciints[4] = {15, 15, 15, 15};
-	//  pci_assign_irqs(0, 12, pciints);
-	//}
-	/* the assigned failed but we just noticed -- there is no
-	 * dma mapping, and selftest on e100 requires that dma work
-	 */
-	mmcr->dmacontrol.extchanmapa = 0xf210;
-	mmcr->dmacontrol.extchanmapb = 0xffff;
-
-	printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__);
-}
-
-struct chip_operations mainboard_ops = {
-	.enable_dev = mainboard_enable,
-};
diff --git a/src/mainboard/technologic/ts5300/romstage.c b/src/mainboard/technologic/ts5300/romstage.c
deleted file mode 100644
index 9cafc64f37..0000000000
--- a/src/mainboard/technologic/ts5300/romstage.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * TS5300 specific initialization code.
- *   written by Stefan Reinauer <stepan@coresystems.de>
- *   (c) 2006 coresystems GmbH
- */
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include "cpu/x86/bist.h"
-
-#define TS5300_LED_OFF outb((inb(0x77)&0xfe), 0x77)
-#define TS5300_LED_ON  outb((inb(0x77)|1), 0x77)
-
-#define TS9500_LED_OFF outb((inb(0x19a)&0xfe), 0x19a)
-#define TS9500_LED_ON  outb((inb(0x19a)|1), 0x19a)
-
-/* PAR register setup */
-void setup_pars(void)
-{
-        volatile unsigned long *par;
-        par = (unsigned long *) 0xfffef088;
-
-        /* NOTE: Ron says, move this to mainboard.c */
-	*par++ = 0x00000000;
-	*par++ = 0x340f0070;
-	*par++ = 0x380701f0;
-	*par++ = 0x3c0103f6;
-	*par++ = 0x2c0f0300;
-	*par++ = 0x447c00a0;
-	*par++ = 0xe600000c;
-	*par++ = 0x300046e8;
-	*par++ = 0x500400d0;
-	*par++ = 0x281f0140;
-	*par++ = 0x00000000;
-	*par++ = 0x00000000;
-	*par++ = 0x00000000;
-	*par++ = 0x8a07c940; /* Flash setup */
-	*par++ = 0x00000000;
-	*par++ = 0xee00400e;
-}
-
-#include "cpu/amd/sc520/raminit.c"
-
-static void identify_ts9500(void)
-{
-	unsigned i, val;
-
-	TS9500_LED_ON;
-
-	print_err("TS-9500 add-on found:\n");
-	val=inb(0x19b);
-	for (i=0; i<8; i++) {
-		print_err("  DIP");
-		print_err_char(i+0x31);
-		print_err(": ");
-		if((val&(1<<i))!=0)
-			print_err("on\n");
-		else
-			print_err("off\n");
-	}
-	print_err("\n");
-
-	val=inb(0x19a);
-
-	for (i=6; i<8; i++) {
-		print_err("  JP");
-		print_err_char(i+0x30-5);
-		print_err(": ");
-		if((val&(1<<i))!=0)
-			print_err("on\n");
-		else
-			print_err("off\n");
-	}
-	print_err("\n");
-
-	TS9500_LED_OFF;
-}
-
-static void identify_system(void)
-{
-	unsigned i,val;
-
-	print_err("Mainboard: ");
-	val=inb(0x74);
-	switch(val) {
-	case 0x50: print_err("TS-5300\n"); break;
-	case 0x40: print_err("TS-5400\n"); break;
-	case 0x60: print_err("TS-5500\n"); break;
-	case 0x20: print_err("TS-5600\n"); break;
-	case 0x70: print_err("TS-5700\n"); break;
-	default:   print_err("unknown\n"); break;
-	}
-
-	val=inb(0x75);
-	print_err("  SRAM option:   ");
-	if((val&1)==0) print_err("not ");
-	print_err("installed\n");
-
-	print_err("  RS-485 option: ");
-	if((val&2)==0) print_err("not ");
-	print_err("installed\n");
-
-	val=inb(0x76);
-	print_err("  Temp. range:   ");
-	if((val&2)==0) print_err("commercial\n");
-	else print_err("industrial\n");
-
-	print_err("\n");
-
-	val=inb(0x77);
-	for (i=1; i<8; i++) {
-		print_err("  JP");
-		print_err_char(i+0x30);
-		print_err(": ");
-		if((val&(1<<i))!=0)
-			print_err("on\n");
-		else
-			print_err("off\n");
-	}
-	print_err("\n");
-
-	/* Detect TS-9500 */
-	val=inb(0x19d);
-	if(val==0x5f)
-		identify_ts9500();
-}
-
-static void hard_reset(void)
-{
-	print_err("Hard reset called.\n");
-	while (1) ;
-}
-
-#include <cpu/intel/romstage.h>
-static void main(unsigned long bist)
-{
-	volatile int i;
-	unsigned val;
-
-	TS5300_LED_ON;
-
-	// Let the hardware settle a bit.
-	for(i = 0; i < 100; i++)
-		;
-
-        setupsc520();
-        console_init();
-
-
-	print_err("Technologic Systems TS5300 - http://www.embeddedx86.com/\n");
-	staticmem();
-
-/* Void warranty when label is removed. */
-dummy_romcc_workaround_label:
-	do { } while (0);
-
-	print_err("Memory initialized: 32MB\n");
-
-#if 1
-	identify_system();
-#endif
-
-	TS5300_LED_OFF;
-}