New Target and initial support for the Thomson IP1000.

Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3328 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 126 insertions, 0 deletions

diff --git a/src/mainboard/thomson/ip1000/auto.c b/src/mainboard/thomson/ip1000/auto.c
new file mode 100755
index 0000000000..205d11b63e
--- /dev/null
+++ b/src/mainboard/thomson/ip1000/auto.c
@@ -0,0 +1,126 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "pc80/udelay_io.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
+#include "northbridge/intel/i82830/raminit.h"
+#include "northbridge/intel/i82830/memory_initialized.c"
+#include "southbridge/intel/i82801xx/i82801xx.h"
+#include "southbridge/intel/i82801xx/i82801xx_reset.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include "spd_table.h"
+#include "gpio.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
+
+#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c"
+#include "southbridge/intel/i82801xx/i82801xx_early_lpc.c"
+
+/**
+ * The onboard 64MB PC133 memory does not have a SPD EEPROM so the
+ * values have to be set manually, the SO-DIMM socket is located in
+ * socket0 (0x50), and the onboard memory is located in socket1 (0x51).
+ */
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	int i;
+
+	if (device == 0x50) {
+		return smbus_read_byte(device, address);
+	} else if (device == 0x51) {
+		for (i = 0; i < ARRAY_SIZE(spd_table); i++) {
+			if (spd_table[i].address == address)
+				return spd_table[i].data;
+		}
+		return 0xFF; /* Return 0xFF when address is not found. */
+	} else {
+		return 0xFF; /* Return 0xFF on any failures. */
+	}
+}
+
+#include "northbridge/intel/i82830/raminit.c"
+#include "sdram/generic_sdram.c"
+
+/**
+ * The AC'97 Audio Controller I/O space registers are read only by default
+ * so we need to enable them by setting register 0x41 to 0x01.
+ */
+static void ac97_io_enable(void)
+{
+	device_t dev;
+
+	/* Set the ac97 audio device staticly. */
+	dev = PCI_DEV(0x0, 0x1f, 0x5);
+
+	/* Enable access to the IO space. */
+	pci_write_config8(dev, 0x41, 0x01);
+}
+
+static void main(unsigned long bist)
+{
+	static const struct mem_controller memctrl[] = {
+		{
+			.d0 = PCI_DEV(0, 0, 0),
+			.channel0 = {0x50, 0x51},
+		}
+	};
+
+	if (bist == 0)
+		early_mtrr_init();
+		if (memory_initialized()) {
+			hard_reset();
+		}
+
+	enable_smbus();
+
+	smscsuperio_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	mb_gpio_init();
+	uart_init();
+	console_init();
+
+	/* Prevent the TCO timer from rebooting us */
+	i82801xx_halt_tco_timer();
+
+	/* Halt if there was a built in self test failure. */
+	report_bist_failure(bist);
+
+	sdram_set_registers(memctrl);
+	sdram_set_spd_registers(memctrl);
+	sdram_enable(0, memctrl);
+
+	/* Check RAM. */
+	/* ram_check(0, 640 * 1024); */
+	/* ram_check(64512 * 1024, 65536 * 1024); */
+
+	ac97_io_enable();
+}