Since some people disapprove of white space cleanups mixed in regular commits

while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

6 files changed, 14 insertions, 14 deletions

diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig
index a0f739c071..a387d1a4ba 100644
--- a/src/mainboard/tyan/s2735/Kconfig
+++ b/src/mainboard/tyan/s2735/Kconfig
@@ -26,12 +26,12 @@ config DCACHE_RAM_BASE
 	hex
 	default 0xcf000
 	depends on BOARD_TYAN_S2735
-	
+
 config DCACHE_RAM_SIZE
 	hex
 	default 0x1000
 	depends on BOARD_TYAN_S2735
-	
+
 config MAINBOARD_PART_NUMBER
 	string
 	default "S2735"
diff --git a/src/mainboard/tyan/s2735/cmos.layout b/src/mainboard/tyan/s2735/cmos.layout
index ccda70c808..608f02867c 100644
--- a/src/mainboard/tyan/s2735/cmos.layout
+++ b/src/mainboard/tyan/s2735/cmos.layout
@@ -30,8 +30,8 @@ entries
 388          4       r       0        reboot_bits
 392          3       e       5        baud_rate
 395          1       e       2        hyper_threading
-396          1       e       1        thermal_monitoring 
-397          1       e       1        remap_memory_high 
+396          1       e       1        thermal_monitoring
+397          1       e       1        remap_memory_high
 400          1       e       1        power_on_after_fail
 412          4       e       6        debug_level
 416          4       e       7        boot_first
diff --git a/src/mainboard/tyan/s2735/devicetree.cb b/src/mainboard/tyan/s2735/devicetree.cb
index 8ad5e0ecac..1e8b12a790 100644
--- a/src/mainboard/tyan/s2735/devicetree.cb
+++ b/src/mainboard/tyan/s2735/devicetree.cb
@@ -5,7 +5,7 @@ chip northbridge/intel/e7501
         	device pci 2.0 on
         		chip southbridge/intel/i82870
         	        	device pci 1c.0 on end
-		                device pci 1d.0 on 
+		                device pci 1d.0 on
                                      	 device pci 1.0 on end # intel lan
                                         device pci 1.1 on end
 				end
@@ -20,7 +20,7 @@ chip northbridge/intel/e7501
         	        device pci 1d.2 on end
         	        device pci 1d.3 on end
 		        device pci 1d.7 on end
-		        device pci 1e.0 on 
+		        device pci 1e.0 on
                              	device pci 1.0 on end # intel lan 10/100
                                 device pci 2.0 on end # ati
 			end
@@ -56,7 +56,7 @@ chip northbridge/intel/e7501
                                                 io 0x60 = 0x220
                                                 io 0x62 = 0x300
                                                 irq 0x70 = 9
-                                        end                               
+                                        end
                                         device pnp 2e.8 off end #  GPIO2
                                         device pnp 2e.9 off end #  GPIO3
                                         device pnp 2e.a off end #  ACPI
diff --git a/src/mainboard/tyan/s2735/irq_tables.c b/src/mainboard/tyan/s2735/irq_tables.c
index 4f6eb306dc..036b8d0cb0 100644
--- a/src/mainboard/tyan/s2735/irq_tables.c
+++ b/src/mainboard/tyan/s2735/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
    Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
diff --git a/src/mainboard/tyan/s2735/mptable.c b/src/mainboard/tyan/s2735/mptable.c
index 6a73c6dc88..cde5c4e3b4 100644
--- a/src/mainboard/tyan/s2735/mptable.c
+++ b/src/mainboard/tyan/s2735/mptable.c
@@ -48,18 +48,18 @@ static void *smp_write_config_table(void *v)
                         res = find_resource(dev, PCI_BASE_ADDRESS_0);
                         if (res) {
                                 smp_write_ioapic(mc, 0x09, 0x20, res->base);
-                        }		
+                        }
 		}
 		dev = dev_find_slot(1, PCI_DEVFN(0x1c,0));
 		if (dev) {
                         res = find_resource(dev, PCI_BASE_ADDRESS_0);
                         if (res) {
                                 smp_write_ioapic(mc, 0x0a, 0x20, res->base);
-                        }		
+                        }
 		}
 	}
 /*I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
-*/	
+*/
 	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x8, 0x0);
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x1, 0x8, 0x1);
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x8, 0x2);
@@ -149,7 +149,7 @@ Compatibility Bus Address
  predefined range: 0x00000000--
 Compatibility Bus Address
  bus ID: 0 address modifier: add
- predefined range: 0x00000001	// There is no extension information... 
+ predefined range: 0x00000001	// There is no extension information...
 */
 	/* Compute the checksums */
 	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c
index f581de431e..de3124cb90 100644
--- a/src/mainboard/tyan/s2735/romstage.c
+++ b/src/mainboard/tyan/s2735/romstage.c
@@ -1,4 +1,4 @@
- 
+
 #include <stdint.h>
 #include <string.h>
 #include <device/pci_def.h>
@@ -50,7 +50,7 @@ void main(unsigned long bist)
                         .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
                 },
 	};
-	
+
 	if (bist == 0) {
 		enable_lapic();
 	}