summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan/s2850
diff options
context:
space:
mode:
authorLi-Ta Lo <ollie@lanl.gov>2004-11-04 20:31:04 +0000
committerLi-Ta Lo <ollie@lanl.gov>2004-11-04 20:31:04 +0000
commit2d2bdd38464b6e4984fbfd20d642e6b3d080e1df (patch)
treef641e0b2ff8c6d26bd5c013f0a785e3ccb42da91 /src/mainboard/tyan/s2850
parentf84926efca2f871fa557cccee36f0f773ec7190b (diff)
downloadcoreboot-2d2bdd38464b6e4984fbfd20d642e6b3d080e1df.tar.xz
removed #if 0 #endif code
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1741 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan/s2850')
-rw-r--r--src/mainboard/tyan/s2850/mainboard.c158
1 files changed, 0 insertions, 158 deletions
diff --git a/src/mainboard/tyan/s2850/mainboard.c b/src/mainboard/tyan/s2850/mainboard.c
index 1270b59146..6ddd3e9727 100644
--- a/src/mainboard/tyan/s2850/mainboard.c
+++ b/src/mainboard/tyan/s2850/mainboard.c
@@ -3,166 +3,8 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
-#include "../../../northbridge/amd/amdk8/northbridge.h"
#include "chip.h"
-#if 0
-static void fixup_lsi_53c1030(struct device *pdev)
-{
-// uint8_t byte;
- uint16_t word;
-
- byte = 1;
- pci_write_config8(pdev, 0xff, byte);
- // Set the device id
-// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030);
- // Set the subsytem vendor id
-// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN);
- word = 0x10f1;
- pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word);
- // Set the subsytem id
- word = 0x2880;
- pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word);
- // Disable writes to the device id
- byte = 0;
- pci_write_config8(pdev, 0xff, byte);
-
-// lsi_scsi_init(pdev);
-
-}
-#endif
-
-#if 0
-static void print_pci_regs(struct device *dev)
-{
- uint8_t byte;
- int i;
-
- for(i=0;i<256;i++) {
- byte = pci_read_config8(dev, i);
-
- if((i%16)==0) printk_debug("\n%02x:",i);
- printk_debug(" %02x",byte);
- }
- printk_debug("\n");
-
-// pci_write_config8(dev, 0x4, byte);
-
-}
-#endif
-#if 0
-static void print_mem(void)
-{
- unsigned int i;
- unsigned int low_1MB = 0xf4107000;
- for(i=low_1MB;i<low_1MB+1024;i++) {
- if((i%16)==0) printk_debug("\n %08x:",i);
- printk_debug(" %02x ",(unsigned char)*((unsigned char *)i));
- }
-#if 0
- for(i=low_1MB;i<low_1MB+1024*4;i++) {
- if((i%16)==0) printk_debug("\n %08x:",i);
- printk_debug(" %c ",(unsigned char)*((unsigned char *)i));
- }
-#endif
- }
-#endif
-#if 0
-static void amd8111_enable_rom(void)
-{
- uint8_t byte;
- struct device *dev;
-
- /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */
- /* Locate the amd8111 */
- dev = dev_find_device(0x1022, 0x7468, 0);
-
- /* Set the 4MB enable bit bit */
- byte = pci_read_config8(dev, 0x43);
- byte |= 0x80;
- pci_write_config8(dev, 0x43, byte);
-}
-#endif
-#if 0
-static void onboard_scsi_fixup(void)
-{
- struct device *dev;
-#if 1
- unsigned char i,j,k;
-
- for(i=0;i<=15;i++) {
- for(j=0;j<=0x1f;j++) {
- for (k=0;k<=6;k++){
- dev = dev_find_slot(i, PCI_DEVFN(j, k));
- if (dev) {
- printk_debug("%02x:%02x:%02x",i,j,k);
- print_pci_regs(dev);
- }
- }
- }
- }
-#endif
-
-
-#if 0
- dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0);
- if(!dev) {
- printk_info("LSI_SCSI_FW_FIXUP: No Device Found!");
- return;
- }
-
- lsi_scsi_init(dev);
-#endif
-// print_mem();
-// amd8111_enable_rom();
-}
-#endif
-#if 0
-static void vga_fixup(void) {
- // we do this right here because:
- // - all the hardware is working, and some VGA bioses seem to need
- // that
- // - we need page 0 below for linuxbios tables.
-#if CONFIG_REALMODE_IDT == 1
- printk_debug("INSTALL REAL-MODE IDT\n");
- setup_realmode_idt();
-#endif
-#if CONFIG_VGABIOS == 1
- printk_debug("DO THE VGA BIOS\n");
- do_vgabios(0x0600);
- post_code(0x93);
-#endif
-
-}
-
-#endif
-
-#if 0
-static void
-enable(struct chip *chip, enum chip_pass pass)
-{
-
- struct mainboard_tyan_s2895_config *conf =
- (struct mainboard_tyan_s2895_config *)chip->chip_info;
-
- switch (pass) {
- default: break;
-// case CONF_PASS_PRE_CONSOLE:
-// case CONF_PASS_PRE_PCI:
-// case CONF_PASS_POST_PCI:
- case CONF_PASS_PRE_BOOT:
-// if (conf->fixup_scsi)
-// onboard_scsi_fixup();
-// if (conf->fixup_vga)
-// vga_fixup();
- printk_debug("mainboard fixup pass %d done\r\n",
- pass);
- break;
- }
-
-}
-#endif
-
struct chip_operations mainboard_tyan_s2850_ops = {
CHIP_NAME("Tyan s2850 mainboard")
};