This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 118 insertions, 118 deletions

diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index 9ee230a90e..74f9c53e65 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -1,5 +1,5 @@
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
 include /config/nofailovercalculation.lb
 
 arch i386 end 
@@ -12,21 +12,21 @@ driver mainboard.o
 
 #dir /drivers/si/3114
 object get_bus_conf.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_MP_TABLE object mptable.o end
+if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
 
 if CONFIG_USE_INIT
 
 makerule ./auto.o
-        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-        action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+        depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+        action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 end
 
 else    
                 
 makerule ./auto.inc
-        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-        action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+        depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+        action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
         action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
         action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 end
@@ -35,7 +35,7 @@ end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
         mainboardinit cpu/x86/16bit/entry16.inc
         ldscript /cpu/x86/16bit/entry16.lds
 end
@@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if USE_FALLBACK_IMAGE 
+if CONFIG_USE_FALLBACK_IMAGE 
 	mainboardinit cpu/x86/16bit/reset16.inc 
 	ldscript /cpu/x86/16bit/reset16.lds 
 else
@@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
        ldscript /arch/i386/lib/failover.lds
 end
 
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb
index 88e7bf2790..2bb6681057 100644
--- a/src/mainboard/tyan/s2885/Options.lb
+++ b/src/mainboard/tyan/s2885/Options.lb
@@ -1,75 +1,75 @@
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_MAX_CPUS
 uses CONFIG_MAX_PHYSICAL_CPUS
 uses CONFIG_LOGICAL_CPUS
 uses CONFIG_IOAPIC
 uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
 uses COREBOOT_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_RAMBASE
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
 uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
+uses CONFIG_HAVE_INIT_TIMER
 uses CONFIG_GDB_STUB
 uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
+uses CONFIG_HW_MEM_HOLE_SIZEK
 
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
 uses CONFIG_USE_PRINTK_IN_CAR
 
-uses ENABLE_APIC_EXT_ID
-uses APIC_ID_OFFSET
-uses LIFT_BSP_APIC_ID
+uses CONFIG_ENABLE_APIC_EXT_ID
+uses CONFIG_APIC_ID_OFFSET
+uses CONFIG_LIFT_BSP_APIC_ID
 
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
 uses CONFIG_LB_MEM_TOPK
 
@@ -78,50 +78,50 @@ uses CONFIG_LB_MEM_TOPK
 ###
 
 ##
-## ROM_SIZE is the size of boot ROM that this board will use.
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
 ##
-default ROM_SIZE=524288
+default CONFIG_ROM_SIZE=524288
 
 ##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
 ##
-#default FALLBACK_SIZE=131072
+#default CONFIG_FALLBACK_SIZE=131072
 #256K
-default FALLBACK_SIZE=0x40000
+default CONFIG_FALLBACK_SIZE=0x40000
 
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
 
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
 
 ##
 ## Move the default coreboot cmos range off of AMD RTC registers
 ##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
 
 ##
 ## Build code for SMP support
@@ -133,19 +133,19 @@ default CONFIG_MAX_PHYSICAL_CPUS=2
 default CONFIG_LOGICAL_CPUS=1
 
 ##HT Unit ID offset, default is 1, the typical one
-default HT_CHAIN_UNITID_BASE=0x0a
+default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
 
 ##real SB Unit ID, default is 0x20, mean dont touch it at last
-default HT_CHAIN_END_UNITID_BASE=0x06
+default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
 
 #make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
 
 ##only offset for SB chain?, default is yes(1)
-#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
 #1G memory hole
-default HW_MEM_HOLE_SIZEK=0x100000
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
 
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
@@ -155,14 +155,14 @@ default CONFIG_PCI_ROM_RUN=1
 ##
 ## enable CACHE_AS_RAM specifics
 ##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xcf000
-default DCACHE_RAM_SIZE=0x1000
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xcf000
+default CONFIG_DCACHE_RAM_SIZE=0x1000
 default CONFIG_USE_INIT=0
 
-default ENABLE_APIC_EXT_ID=1
-default APIC_ID_OFFSET=0x10
-default LIFT_BSP_APIC_ID=0
+default CONFIG_ENABLE_APIC_EXT_ID=1
+default CONFIG_APIC_ID_OFFSET=0x10
+default CONFIG_LIFT_BSP_APIC_ID=0
 
 ##
 ## Build code to setup a generic IOAPIC
@@ -172,37 +172,37 @@ default CONFIG_IOAPIC=1
 ##
 ## Clean up the motherboard id strings
 ##
-default MAINBOARD_PART_NUMBER="s2885"
-default MAINBOARD_VENDOR="Tyan"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885
+default CONFIG_MAINBOARD_PART_NUMBER="s2885"
+default CONFIG_MAINBOARD_VENDOR="Tyan"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 16K heap
 ##
-default HEAP_SIZE=0x4000
+default CONFIG_HEAP_SIZE=0x4000
 
 ##
 ## Only use the option table in a normal image
 ##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
 
 ##
 ## Coreboot C code runs at this location in RAM
 ##
-default _RAMBASE=0x00004000
+default CONFIG_RAMBASE=0x00004000
 
 ##
 ## Load the payload from the ROM
@@ -216,8 +216,8 @@ default CONFIG_ROM_PAYLOAD = 1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 ##
 ## Disable the gdb stub by default
@@ -234,21 +234,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1
 default CONFIG_CONSOLE_SERIAL8250=1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ### Select the coreboot loglevel
@@ -260,17 +260,17 @@ default TTYS0_LCS=0x3
 ## WARNING    5   warning conditions               
 ## NOTICE     6   normal but significant condition 
 ## INFO       7   informational                    
-## DEBUG      8   debug-level messages             
+## CONFIG_DEBUG      8   debug-level messages             
 ## SPEW       9   Way too many details             
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 ##
 ## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
 #
diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c
index 711afbc645..c2f97df8ae 100644
--- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c
@@ -99,7 +99,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "cpu/amd/model_fxx/init_cpus.c"
 
 
-#if USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
@@ -155,7 +155,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 
-#if USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
         failover_process(bist, cpu_init_detectedx);
 #endif
         real_main(bist, cpu_init_detectedx);
@@ -185,11 +185,11 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 //	post_code(0x32);
 	
- 	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ 	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
         uart_init();
         console_init();
 
-//	dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
+//	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
 	
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c
index b50f671f9b..eaf77cd569 100644
--- a/src/mainboard/tyan/s2885/get_bus_conf.c
+++ b/src/mainboard/tyan/s2885/get_bus_conf.c
@@ -85,7 +85,7 @@ void get_bus_conf(void)
         dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
         if (dev) {
                 bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE
+#if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE
                 bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
                 bus_isa++;
 //		printk_debug("bus_isa=%d\n",bus_isa);
@@ -108,7 +108,7 @@ void get_bus_conf(void)
         dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0));
         if (dev) {
                 bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+#if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE
                 bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
                 bus_isa++;
 //              printk_debug("bus_isa=%d\n",bus_isa);