Next step. Kill auto.c and failover.c and clean up Config.lb for

tyan/s2735
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895

Abuild log is completely identical with and without the patch.


Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4050 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 0 insertions, 311 deletions

diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index a763e019e7..5ecbd4598b 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -45,8 +45,6 @@ object get_bus_conf.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 
 makerule ./auto.o
@@ -64,31 +62,6 @@ makerule ./auto.inc
 end
 
 end
-else
-  
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ../romcc"
-        action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
@@ -99,7 +72,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -107,7 +79,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript      /cpu/amd/car/cache_as_ram.lds
         end
-end
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-if USE_DCACHE_RAM
 ##
 ## Setup Cache-As-Ram
 ##
 mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -145,12 +108,7 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
-       ldscript /arch/i386/lib/failover.lds
-else
        ldscript /arch/i386/lib/failover.lds
-        mainboardinit ./failover.inc
-end
 end
 
 ###
@@ -160,28 +118,12 @@ end
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 if CONFIG_USE_INIT
 initobject auto.o
 else
 mainboardinit ./auto.inc
 end
 
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
deleted file mode 100644
index c926487d5a..0000000000
--- a/src/mainboard/tyan/s2885/auto.c
+++ /dev/null
@@ -1,186 +0,0 @@
-#define ASSEMBLY 1
- 
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue;
-                }
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {
-                        return (config_map >> 16) & 0xff;
-                }
-        }
-        return 0;
-}
-
-static void hard_reset(void)
-{
-	device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
-	set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-//#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-
-#if 0
-        #define ENABLE_APIC_EXT_ID 1
-        #define APIC_ID_OFFSET 0x10
-        #define LIFT_BSP_APIC_ID 0
-#else                   
-        #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c" 
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-static void main(unsigned long bist)
-{
-        static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-                {
-                        .node_id = 0,
-                        .f0 = PCI_DEV(0, 0x18, 0),
-                        .f1 = PCI_DEV(0, 0x18, 1),
-                        .f2 = PCI_DEV(0, 0x18, 2),
-                        .f3 = PCI_DEV(0, 0x18, 3),
-                        .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-                        .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-                },
-#endif
-#if SECOND_CPU
-                {
-                        .node_id = 1,
-                        .f0 = PCI_DEV(0, 0x19, 0),
-                        .f1 = PCI_DEV(0, 0x19, 1),
-                        .f2 = PCI_DEV(0, 0x19, 2),
-                        .f3 = PCI_DEV(0, 0x19, 3),
-                        .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-                        .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-                },
-#endif
-        };
-
-        int needs_reset;
-
-	if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-	}
-	
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();
-        console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_s2885_resource_map();
-        needs_reset = setup_coherent_ht_domain();
-
-	// automatically set that for you, but you might meet tight space
-        needs_reset |= ht_setup_chains_x();
-
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-
-	enable_smbus();
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-
-
-}
diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c
deleted file mode 100644
index abd2042cd8..0000000000
--- a/src/mainboard/tyan/s2885/failover.c
+++ /dev/null
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
-	/* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-	/* Is this a cpu only reset? */
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}