Tyan S8226: Fix integer truncated warning

Fix Warning:
  sb700_cfg.c:129, GNU Compiler 4 (gcc), Priority: Normal
  large integer implicitly truncated to unsigned type [-Woverflow]

The issue here was that an 8 bit value was being placed into a 2-bit
bitfield.

    $ more src/vendorcode/amd/cimx/sb700/SBTYPE.h
    […]
    UINT32  AzaliaSdin0     :2;                     //6
    UINT32  AzaliaSdin1     :2;                     //8
    UINT32  AzaliaSdin2     :2;                     //10
    UINT32  AzaliaSdin3     :2;                     //12
    $ more src/mainboard/tyan/s8226/sb700_cfg.h
    […]
     *  SDIN0 is define at BIT0 & BIT1
     *   00 - GPIO PIN
     *   01 - Reserved
     *   10 - As a Azalia SDIN pin
     *  SDIN1 is define at BIT2 & BIT3
     *  SDIN2 is define at BIT4 & BIT5
     *  SDIN3 is define at BIT6 & BIT7
     */
    #ifndef AZALIA_SDIN_PIN
    #define AZALIA_SDIN_PIN              0x2A
    #endif
    […]
    $ more src/mainboard/tyan/s8226/sb700_cfg.c
    […]
    	sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN;
    […]

The 8 bit value 0x2A (binary 00 10 10 10), was being used incorrectly
– I believe the original intent of this value was to enable the SDIN
pins 0, 1, & 2. Because it was getting truncated as it was put into
AzaliaSdin0, this wasn't happening and only SDIN0 was being enabled.

I am leaving only SDIN0 enabled at this point to as not change the
actual behavior on the platform.

Change-Id: Icaeb956926309dbfb5af25a36ccb842877e17a34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2452
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

0 files changed, 0 insertions, 0 deletions