There are more than a dozen targets in the v2 tree which refer to ROMCC

in their Config.lb but never use it. There's no point in keeping
dead code around.

This patch removes ROMCC remainders from Config.lb and kills orphaned
auto.c and failover.c in the affected mainboard directories.

arima/hdama
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms9282
newisys/khepri
sunw/ultra40
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882

Abuild log is completely identical with and without the patch.

With this patch, the last ROMCC remainders for K8 boards are gone.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 0 insertions, 366 deletions

diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
index cf728b82ad..ac36e925a7 100644
--- a/src/mainboard/tyan/s4880/Config.lb
+++ b/src/mainboard/tyan/s4880/Config.lb
@@ -43,7 +43,6 @@ arch i386 end
 driver mainboard.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
 
 	if CONFIG_USE_INIT
 
@@ -61,43 +60,6 @@ if USE_DCACHE_RAM
 		        action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 			end
 	end
-else
-
-	##
-	## Romcc output
-	##
-	makerule ./failover.E
-        	depends "$(MAINBOARD)/failover.c ../romcc"
-	        action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./failover.inc
-	        depends "$(MAINBOARD)/failover.c ../romcc"
-        	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-	end
-
-	makerule ./auto.E
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	makerule ./auto.inc
-        	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	        action  "../romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-	end
-
-	##
-	## Setup RAM
-	##
-	mainboardinit cpu/x86/fpu/enable_fpu.inc
-	mainboardinit cpu/x86/mmx/enable_mmx.inc
-	mainboardinit cpu/x86/sse/enable_sse.inc
-	mainboardinit ./auto.inc
-	mainboardinit cpu/x86/sse/disable_sse.inc
-	mainboardinit cpu/x86/mmx/disable_mmx.inc
-	mainboardinit arch/i386/lib/jmp_auto_out.inc
-
-end
 
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
@@ -109,7 +71,6 @@ end
 
 mainboardinit cpu/x86/32bit/entry32.inc
 
-if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/x86/32bit/entry32.lds
         end
@@ -117,8 +78,6 @@ if USE_DCACHE_RAM
         if CONFIG_USE_INIT
                 ldscript /cpu/amd/car/cache_as_ram.lds
         end
-end
-
 
 ##
 ## Build our reset vector (This is where coreboot is entered)
@@ -131,25 +90,16 @@ else
 	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
-if USE_DCACHE_RAM
-else
-	### Should this be in the northbridge code?
-	mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
 ##
 ## Include an id string (For safe flashing)
 ##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-
-if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
 	##
 	mainboardinit cpu/amd/car/cache_as_ram.inc
-end
 
 ###
 ### This is the early phase of coreboot startup 
@@ -157,32 +107,18 @@ end
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-	if USE_DCACHE_RAM
 		ldscript /arch/i386/lib/failover.lds
-	else
-       		ldscript /arch/i386/lib/failover.lds
-	        mainboardinit ./failover.inc
-	end
 end
 
 ##
 ## Setup RAM
 ##
-if USE_DCACHE_RAM
-
 	if CONFIG_USE_INIT
 		initobject auto.o
 	else
 		mainboardinit ./auto.inc
 	end
 
-else
-
-	# ROMCC
-	mainboardinit arch/i386/lib/jmp_auto.inc
-
-end
-
 ##
 ## Include the secondary Configuration files 
 ##
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c
index 36115f6a0d..e69de29bb2 100644
--- a/src/mainboard/tyan/s4880/auto.c
+++ b/src/mainboard/tyan/s4880/auto.c
@@ -1,233 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        unsigned reg;
-        
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                unsigned config_map;
-                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
-                if ((config_map & 3) != 3) {
-                        continue; 
-                }       
-                if ((((config_map >> 4) & 7) == node) &&
-                        (((config_map >> 8) & 3) == link))
-                {       
-                        return (config_map >> 16) & 0xff;
-                }       
-        }       
-        return 0;
-}       
-
-static void hard_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
-        set_bios_reset();
-
-        /* enable cf9 */
-        pci_write_config8(dev, 0x41, 0xf1);
-        /* reset */
-        outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-        device_t dev;
-
-        /* Find the device */
-        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
-        set_bios_reset();
-        pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0()) {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   }
-   else {
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   }
-        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
-        unsigned device=(ctrl->channel0[0])>>8;
-        smbus_write_byte(SMBUS_HUB , 0x01, device);
-        smbus_write_byte(SMBUS_HUB , 0x03, 0);
-}
-#if 0
-static inline void change_i2c_mux(unsigned device)
-{
-#define SMBUS_HUB 0x18
-        smbus_write_byte(SMBUS_HUB , 0x01, device);
-        smbus_write_byte(SMBUS_HUB , 0x03, 0);
-}
-#endif
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-
-#define THIRD_CPU  1 
-#define FOURTH_CPU 1 
-
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
-
-#define RC0 ((1<<1)<<8)
-#define RC1 ((1<<2)<<8)
-#define RC2 ((1<<3)<<8)
-#define RC3 ((1<<4)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-        
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-                {
-                        .node_id = 0,
-                        .f0 = PCI_DEV(0, 0x18, 0),
-                        .f1 = PCI_DEV(0, 0x18, 1),
-                        .f2 = PCI_DEV(0, 0x18, 2),
-                        .f3 = PCI_DEV(0, 0x18, 3),
-                        .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
-                        .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
-                },
-#endif
-#if SECOND_CPU
-                {
-                        .node_id = 1,
-                        .f0 = PCI_DEV(0, 0x19, 0),
-                        .f1 = PCI_DEV(0, 0x19, 1),
-                        .f2 = PCI_DEV(0, 0x19, 2),
-                        .f3 = PCI_DEV(0, 0x19, 3),
-                        .channel0 = { RC1|DIMM0, 0 , 0, 0 },
-                        .channel1 = { RC1|DIMM1, 0, 0, 0 },
-
-                },
-#endif
-
-#if THIRD_CPU
-                {
-                        .node_id = 2,
-                        .f0 = PCI_DEV(0, 0x1a, 0),
-                        .f1 = PCI_DEV(0, 0x1a, 1),
-                        .f2 = PCI_DEV(0, 0x1a, 2),
-                        .f3 = PCI_DEV(0, 0x1a, 3),
-                        .channel0 = { RC2|DIMM0, 0, 0, 0 },
-                        .channel1 = { RC2|DIMM1, 0, 0, 0 },
-
-                },
-#endif
-#if FOURTH_CPU
-                {
-                        .node_id = 3,
-                        .f0 = PCI_DEV(0, 0x1b, 0),
-                        .f1 = PCI_DEV(0, 0x1b, 1),
-                        .f2 = PCI_DEV(0, 0x1b, 2),
-                        .f3 = PCI_DEV(0, 0x1b, 3),
-                        .channel0 = { RC3|DIMM0, 0, 0, 0 },
-                        .channel1 = { RC3|DIMM1, 0, 0, 0 },
-
-                },
-#endif
-	};
-	int i;
-        int needs_reset;
-
-        if (bist == 0) {
-	    	k8_init_and_stop_secondaries();
-        }
-
-        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-        uart_init();    
-        console_init(); 
-                
-        /* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_s4880_resource_map();
-
-        needs_reset = setup_coherent_ht_domain();
-
-        needs_reset |= ht_setup_chains_x();
-	
-        if (needs_reset) {
-                print_info("ht reset -\r\n");
-                soft_reset();
-        }
-	
-#if 0
-	dump_pci_devices();
-#endif
-	enable_smbus();
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
diff --git a/src/mainboard/tyan/s4880/failover.c b/src/mainboard/tyan/s4880/failover.c
index c347af32dd..e69de29bb2 100644
--- a/src/mainboard/tyan/s4880/failover.c
+++ b/src/mainboard/tyan/s4880/failover.c
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif  
-        
-                
-static unsigned long main(unsigned long bist)
-{       
-        /* Make cerain my local apic is useable */
-        enable_lapic();
-        
-        /* Is this a cpu only reset? */
-        if (early_mtrr_init_detected()) {
-               if (last_boot_normal()) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-        /* Is this a secondary cpu? */
-        if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}