cleaning out motherboard specific changes from the generic directories.

Moving tyan resource map to tyan directory. Making IOMMU for hammer choosable
via ENABLE_IOMMU


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1088 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 278 insertions, 2 deletions

diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index 865a07d122..9c9953e927 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -5,6 +5,7 @@ uses USE_NORMAL_IMAGE
 uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
+uses ENABLE_IOMMU
 #
 #
 ###
@@ -174,3 +175,5 @@ end
 
 cpu k8 "cpu1"
 end
+
+option ENABLE_IOMMU=1
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index 987012976c..8297ecff7d 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -5,6 +5,7 @@ uses USE_NORMAL_IMAGE
 uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
+uses ENABLE_IOMMU
 #
 #
 ###
@@ -173,3 +174,5 @@ end
 
 cpu k8 "cpu1"
 end
+
+option ENABLE_IOMMU=1
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index bdbd7c032f..81a72f728f 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -5,6 +5,7 @@ uses USE_NORMAL_IMAGE
 uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
+uses ENABLE_IOMMU
 #
 #
 ###
@@ -176,3 +177,6 @@ end
 
 cpu k8 "cpu1"
 end
+
+option ENABLE_IOMMU=0
+
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index c494ca0985..d2f6c648f1 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -84,10 +84,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "northbridge/amd/amdk8/cpu_ldtstop.c"
 #include "southbridge/amd/amd8111/amd8111_ldtstop.c"
 
-#include "northbridge/amd/amdk8/raminit.1.c"
+#include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.1.c"
 #include "sdram/generic_sdram.c"
 
+#include "resourcemap.c" /* tyan does not want the default */
+
 static void enable_lapic(void)
 {
 	msr_t msr;
@@ -164,7 +166,7 @@ static void main(void)
 	}
 	uart_init();
 	console_init();
-	setup_default_resource_map();
+	setup_s2885_resource_map();
 	setup_coherent_ht_domain();
         enumerate_ht_chain(0);
 	//setup_resource_map_x();
diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c
new file mode 100644
index 0000000000..739676ecd7
--- /dev/null
+++ b/src/mainboard/tyan/s2885/resourcemap.c
@@ -0,0 +1,264 @@
+/*
+ * Tyan S2885 needs a different resource map
+ *
+ */
+
+static void setup_s2885_resource_map(void)
+{
+	static const unsigned int register_values[] = {
+	/* Careful set limit registers before base registers which contain the enables */
+	/* DRAM Limit i Registers
+	 * F1:0x44 i = 0
+	 * F1:0x4C i = 1
+	 * F1:0x54 i = 2
+	 * F1:0x5C i = 3
+	 * F1:0x64 i = 4
+	 * F1:0x6C i = 5
+	 * F1:0x74 i = 6
+	 * F1:0x7C i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 3] Reserved
+	 * [10: 8] Interleave select
+	 *	   specifies the values of A[14:12] to use with interleave enable.
+	 * [15:11] Reserved
+	 * [31:16] DRAM Limit Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40 bit  address
+	 *	   that define the end of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+	/* DRAM Base i Registers
+	 * F1:0x40 i = 0
+	 * F1:0x48 i = 1
+	 * F1:0x50 i = 2
+	 * F1:0x58 i = 3
+	 * F1:0x60 i = 4
+	 * F1:0x68 i = 5
+	 * F1:0x70 i = 6
+	 * F1:0x78 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 7: 2] Reserved
+	 * [10: 8] Interleave Enable
+	 *	   000 = No interleave
+	 *	   001 = Interleave on A[12] (2 nodes)
+	 *	   010 = reserved
+	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
+	 *	   100 = reserved
+	 *	   101 = reserved
+	 *	   110 = reserved
+	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+	 * [15:11] Reserved
+	 * [13:16] DRAM Base Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40-bit address
+	 *	   that define the start of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+	/* Memory-Mapped I/O Limit i Registers
+	 * F1:0x84 i = 0
+	 * F1:0x8C i = 1
+	 * F1:0x94 i = 2
+	 * F1:0x9C i = 3
+	 * F1:0xA4 i = 4
+	 * F1:0xAC i = 5
+	 * F1:0xB4 i = 6
+	 * F1:0xBC i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = Reserved
+	 * [ 6: 6] Reserved
+	 * [ 7: 7] Non-Posted
+	 *	   0 = CPU writes may be posted
+	 *	   1 = CPU writes must be non-posted
+	 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+	 *	   This field defines the upp adddress bits of a 40-bit address that
+	 *	   defines the end of a memory-mapped I/O region n
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
+
+	/* Memory-Mapped I/O Base i Registers
+	 * F1:0x80 i = 0
+	 * F1:0x88 i = 1
+	 * F1:0x90 i = 2
+	 * F1:0x98 i = 3
+	 * F1:0xA0 i = 4
+	 * F1:0xA8 i = 5
+	 * F1:0xB0 i = 6
+	 * F1:0xB8 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Cpu Disable
+	 *	   0 = Cpu can use this I/O range
+	 *	   1 = Cpu requests do not use this I/O range
+	 * [ 3: 3] Lock
+	 *	   0 = base/limit registers i are read/write
+	 *	   1 = base/limit registers i are read-only
+	 * [ 7: 4] Reserved
+	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+	 *	   This field defines the upper address bits of a 40bit address 
+	 *	   that defines the start of memory-mapped I/O region i
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+	/* PCI I/O Limit i Registers
+	 * F1:0xC4 i = 0
+	 * F1:0xCC i = 1
+	 * F1:0xD4 i = 2
+	 * F1:0xDC i = 3
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = reserved
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Limit Address i
+	 *	   This field defines the end of PCI I/O region n
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
+	PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+	/* PCI I/O Base i Registers
+	 * F1:0xC0 i = 0
+	 * F1:0xC8 i = 1
+	 * F1:0xD0 i = 2
+	 * F1:0xD8 i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 3: 2] Reserved
+	 * [ 4: 4] VGA Enable
+	 *	   0 = VGA matches Disabled
+	 *	   1 = matches all address < 64K and where A[9:0] is in the 
+	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+	 * [ 5: 5] ISA Enable
+	 *	   0 = ISA matches Disabled
+	 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+	 *	       from matching agains this base/limit pair
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Base i
+	 *	   This field defines the start of PCI I/O region n 
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+	PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+	/* Config Base and Limit i Registers
+	 * F1:0xE0 i = 0
+	 * F1:0xE4 i = 1
+	 * F1:0xE8 i = 2
+	 * F1:0xEC i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Device Number Compare Enable
+	 *	   0 = The ranges are based on bus number
+	 *	   1 = The ranges are ranges of devices on bus 0
+	 * [ 3: 3] Reserved
+	 * [ 6: 4] Destination Node
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 7] Reserved
+	 * [ 9: 8] Destination Link
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 - Reserved
+	 * [15:10] Reserved
+	 * [23:16] Bus Number Base i
+	 *	   This field defines the lowest bus number in configuration region i
+	 * [31:24] Bus Number Limit i
+	 *	   This field defines the highest bus number in configuration regin i
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x03000203,
+	PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x05040003,
+	PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+	};
+	int max;
+	max = sizeof(register_values)/sizeof(register_values[0]);
+	setup_resource_map(register_values, max);
+}
+