summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
diff options
context:
space:
mode:
authorPatrick Georgi <patrick.georgi@coresystems.de>2010-02-07 21:43:48 +0000
committerPatrick Georgi <patrick.georgi@coresystems.de>2010-02-07 21:43:48 +0000
commitabf2ad716daff751d75907d47bcae4a7044fd7b4 (patch)
treef82427b43d76a4791253373affed1af8669e2e7b /src/mainboard/tyan
parent389240f288b2708617a35ebe8d7f89b3bff316c5 (diff)
downloadcoreboot-abf2ad716daff751d75907d47bcae4a7044fd7b4.tar.xz
newconfig is no more.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan')
-rw-r--r--src/mainboard/tyan/s1846/Config.lb128
-rw-r--r--src/mainboard/tyan/s1846/Options.lb97
-rw-r--r--src/mainboard/tyan/s2735/Config.lb179
-rw-r--r--src/mainboard/tyan/s2735/Options.lb256
-rw-r--r--src/mainboard/tyan/s2850/Config.lb197
-rw-r--r--src/mainboard/tyan/s2850/Options.lb244
-rw-r--r--src/mainboard/tyan/s2875/Config.lb189
-rw-r--r--src/mainboard/tyan/s2875/Options.lb245
-rw-r--r--src/mainboard/tyan/s2880/Config.lb200
-rw-r--r--src/mainboard/tyan/s2880/Options.lb244
-rw-r--r--src/mainboard/tyan/s2881/Config.lb233
-rw-r--r--src/mainboard/tyan/s2881/Options.lb261
-rw-r--r--src/mainboard/tyan/s2882/Config.lb227
-rw-r--r--src/mainboard/tyan/s2882/Options.lb244
-rw-r--r--src/mainboard/tyan/s2885/Config.lb233
-rw-r--r--src/mainboard/tyan/s2885/Options.lb269
-rw-r--r--src/mainboard/tyan/s2891/Config.lb123
-rw-r--r--src/mainboard/tyan/s2891/Options.lb302
-rw-r--r--src/mainboard/tyan/s2892/Config.lb124
-rw-r--r--src/mainboard/tyan/s2892/Options.lb290
-rw-r--r--src/mainboard/tyan/s2895/Config.lb145
-rw-r--r--src/mainboard/tyan/s2895/Options.lb311
-rw-r--r--src/mainboard/tyan/s2912/Config.lb315
-rw-r--r--src/mainboard/tyan/s2912/Options.lb355
-rw-r--r--src/mainboard/tyan/s2912_fam10/Config.lb320
-rw-r--r--src/mainboard/tyan/s2912_fam10/Options.lb362
-rw-r--r--src/mainboard/tyan/s4880/Config.lb195
-rw-r--r--src/mainboard/tyan/s4880/Options.lb253
-rw-r--r--src/mainboard/tyan/s4882/Config.lb302
-rw-r--r--src/mainboard/tyan/s4882/Options.lb252
30 files changed, 0 insertions, 7095 deletions
diff --git a/src/mainboard/tyan/s1846/Config.lb b/src/mainboard/tyan/s1846/Config.lb
deleted file mode 100644
index 31e0fb8056..0000000000
--- a/src/mainboard/tyan/s1846/Config.lb
+++ /dev/null
@@ -1,128 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/nsc/pc87309 # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 on # Power management
- end
- device pnp 2e.5 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.6 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb
deleted file mode 100644
index 975a085b1a..0000000000
--- a/src/mainboard/tyan/s1846/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-end
diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb
deleted file mode 100644
index 4f9fc5b20b..0000000000
--- a/src/mainboard/tyan/s2735/Config.lb
+++ /dev/null
@@ -1,179 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/car/cache_as_ram.lds
- end
-
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/x86/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2735
-chip northbridge/intel/e7501
- device pci_domain 0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 2.0 on
- chip southbridge/intel/i82870
- device pci 1c.0 on end
- device pci 1d.0 on
- device pci 1.0 on end # intel lan
- device pci 1.1 on end
- end
- device pci 1e.0 on end
- device pci 1f.0 on end
- end
- end
- device pci 6.0 on end
- chip southbridge/intel/i82801er
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 on end
- device pci 1d.7 on end
- device pci 1e.0 on
- device pci 1.0 on end # intel lan 10/100
- device pci 2.0 on end # ati
- end
- device pci 1f.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1f.1 off end
- device pci 1f.2 on end
- device pci 1f.3 on end
- device pci 1f.5 off end
- device pci 1f.6 off end
- end # SB
- end # PCI_DOMAIN
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604
- device apic 6 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb
deleted file mode 100644
index 61933d2233..0000000000
--- a/src/mainboard/tyan/s2735/Options.lb
+++ /dev/null
@@ -1,256 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_INIT
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_SERIAL_CPU_INIT
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-default CONFIG_ROM_SIZE=524288
-
-#1M bytes
-#default CONFIG_ROM_SIZE=1048576
-
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-#default CONFIG_CONSOLE_VGA=1
-#default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-#default CONFIG_DCACHE_RAM_BASE=0xF2000000
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2735"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb
deleted file mode 100644
index eaa338e041..0000000000
--- a/src/mainboard/tyan/s2850/Config.lb
+++ /dev/null
@@ -1,197 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2850
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT0
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- #chip drivers/ati/ragexl
- device pci b.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb
deleted file mode 100644
index a53d5b7272..0000000000
--- a/src/mainboard/tyan/s2850/Options.lb
+++ /dev/null
@@ -1,244 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2850"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb
deleted file mode 100644
index 6145ba7428..0000000000
--- a/src/mainboard/tyan/s2875/Config.lb
+++ /dev/null
@@ -1,189 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2875
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb
deleted file mode 100644
index 51913e30fb..0000000000
--- a/src/mainboard/tyan/s2875/Options.lb
+++ /dev/null
@@ -1,245 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=13
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2875"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
deleted file mode 100644
index 5e72afbbfb..0000000000
--- a/src/mainboard/tyan/s2880/Config.lb
+++ /dev/null
@@ -1,200 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2880
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end #broadcom
- device pci 9.1 on end
-# chip drivers/lsi/53c1030
-# device pci a.0 on end
-# device pci a.1 on end
-# register "fw_address" = "0xfff8c000"
-# end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end #some sata
- device pci 6.0 on end #adti
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb
deleted file mode 100644
index c41e03f356..0000000000
--- a/src/mainboard/tyan/s2880/Options.lb
+++ /dev/null
@@ -1,244 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=13
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2880"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb
deleted file mode 100644
index a46e0ef661..0000000000
--- a/src/mainboard/tyan/s2881/Config.lb
+++ /dev/null
@@ -1,233 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-object get_bus_conf.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2881
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end # Broadcom 5704
- device pci 9.1 on end
- device pci a.0 on end # Adaptic
- device pci a.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end # SiI
- device pci 6.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- chip drivers/i2c/adm1027 # ADT7463A CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3
- device i2c 2d on end
- end
- chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN
- device i2c 2a on end
- end
- chip drivers/generic/generic # Winbond HWM 0x92
- device i2c 49 on end
- end
- chip drivers/generic/generic # Winbond HWM 0x94
- device i2c 4a on end
- end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb
deleted file mode 100644
index 59002d27de..0000000000
--- a/src/mainboard/tyan/s2881/Options.lb
+++ /dev/null
@@ -1,261 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2881"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
deleted file mode 100644
index 266733154e..0000000000
--- a/src/mainboard/tyan/s2882/Config.lb
+++ /dev/null
@@ -1,227 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2882
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 6.0 on end # adaptec
- device pci 6.1 on end
- device pci 9.0 on end # broadcom 5704
- device pci 9.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end
- # chip drivers/ati/ragexl
- device pci 6.0 on end
- # end
- device pci 8.0 on end #intel 10/100
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.3 on
-# chip drivers/generic/generic #dimm 0-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 0-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-0
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-1
-# device i2c 55 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-0
-# device i2c 56 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-1
-# device i2c 57 on end
-# end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # NB
- end #pci_domain
-end
-
diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb
deleted file mode 100644
index d4ff6fef88..0000000000
--- a/src/mainboard/tyan/s2882/Options.lb
+++ /dev/null
@@ -1,244 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2882"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
deleted file mode 100644
index 26389a18ce..0000000000
--- a/src/mainboard/tyan/s2885/Config.lb
+++ /dev/null
@@ -1,233 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-object get_bus_conf.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2885
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT0
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- end
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end # broadcom 5703
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci b.0 on end # SiI 3114
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # acpi
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end #pci_domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end
-# device pnp 0.1 off end
-# device pnp 0.2 off end
-# device pnp 0.3 off end
-# device pnp 0.4 off end
-# device pnp 0.5 on end
-# end
-end
-
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb
deleted file mode 100644
index fc43fc834d..0000000000
--- a/src/mainboard/tyan/s2885/Options.lb
+++ /dev/null
@@ -1,269 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2885"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb
deleted file mode 100644
index 42627a35f1..0000000000
--- a/src/mainboard/tyan/s2891/Config.lb
+++ /dev/null
@@ -1,123 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/ati/ragexl
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
deleted file mode 100644
index a0ed35b74c..0000000000
--- a/src/mainboard/tyan/s2891/Options.lb
+++ /dev/null
@@ -1,302 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=512*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2891"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
deleted file mode 100644
index 38645588c7..0000000000
--- a/src/mainboard/tyan/s2892/Config.lb
+++ /dev/null
@@ -1,124 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/ati/ragexl
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
deleted file mode 100644
index e3f1606cf3..0000000000
--- a/src/mainboard/tyan/s2892/Options.lb
+++ /dev/null
@@ -1,290 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2892"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
deleted file mode 100644
index 1b7f808b40..0000000000
--- a/src/mainboard/tyan/s2895/Config.lb
+++ /dev/null
@@ -1,145 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-end
-
-##
-## Setup Cache-As-Ram
-##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
deleted file mode 100644
index 6659c9ad38..0000000000
--- a/src/mainboard/tyan/s2895/Options.lb
+++ /dev/null
@@ -1,311 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2895"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb
deleted file mode 100644
index 35511f83ca..0000000000
--- a/src/mainboard/tyan/s2912/Config.lb
+++ /dev/null
@@ -1,315 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb
deleted file mode 100644
index 52d8202437..0000000000
--- a/src/mainboard/tyan/s2912/Options.lb
+++ /dev/null
@@ -1,355 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=3
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=1
-default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2912"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb
deleted file mode 100644
index 538ababb8f..0000000000
--- a/src/mainboard/tyan/s2912_fam10/Config.lb
+++ /dev/null
@@ -1,320 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-dir /southbridge/nvidia/mcp55
-
-chip northbridge/amd/amdfam10/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F_1207
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdfam10 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # SB on link 2.0.
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on
- device pci 4.0 on end
- end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb
deleted file mode 100644
index d9444d810a..0000000000
--- a/src/mainboard/tyan/s2912_fam10/Options.lb
+++ /dev/null
@@ -1,362 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_PCI_BUS_SEGN_BITS
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_AMDMCT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_AMD_UCODE_PATCH_FILE
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=16384*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=31
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x00
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=1
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc4000
-default CONFIG_DCACHE_RAM_SIZE=0x0c000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
-default CONFIG_USE_INIT=0
-
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-default CONFIG_AMDMCT = 1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2912 (Fam10)"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
-
-##
-## Set microcode patch file name
-##
-## Barcelona rev DR-Ax: "mc_patch_01000020.h"
-## Barcelona rev DR-B0, B1, BA: "mc_patch_01000096.h"
-## Barcelona rev DR-B2, B3: "mc_patch_01000095.h"
-## Shanghai rev DA-C2: "mc_patch_0100009f.h"
-##
-default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000095.h"
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = (128*1024) - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0xc0000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00200000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
deleted file mode 100644
index 5e1aaf5130..0000000000
--- a/src/mainboard/tyan/s4880/Config.lb
+++ /dev/null
@@ -1,195 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
-
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s4880
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
-# chip drivers/lsi/53c1030
-# device pci 4.0 on end
-# device pci 4.1 on end
-# register "fw_address" = "0xfff8c000"
-# end
- device pci 9.0 on end
- device pci 9.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 6.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end #pci_domain
-end
-
diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb
deleted file mode 100644
index 05490b785f..0000000000
--- a/src/mainboard/tyan/s4880/Options.lb
+++ /dev/null
@@ -1,253 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=22
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=8
-default CONFIG_MAX_PHYSICAL_CPUS=4
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PART_NUMBER="s4880"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb
deleted file mode 100644
index bbb94f2116..0000000000
--- a/src/mainboard/tyan/s4882/Config.lb
+++ /dev/null
@@ -1,302 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
-
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s4882
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT0
- device pci 18.0 on # northbridge
- # devices on link 1, link 1 == LDT 1
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
-# chip drivers/lsi/53c1030
-# device pci 4.0 on end
-# device pci 4.1 on end
-# register "fw_address" = "0xfff8c000"
-# end
- device pci 9.0 on end #Broadcom
- device pci 9.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- #chip drivers/ati/ragexl
- device pci 6.0 on end
- #end
- device pci 5.0 on end #SiI
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
-# chip drivers/i2c/i2cmux # pca9556 smbus mux
-# device i2c 18 on #0 pca9516 2, 1
-# chip drivers/i2c/lm63 #cpu0 temp
-# device i2c 4c on end
-# end
-# end
-# device i2c 18 on #1 pca9516 1, 1
-# chip drivers/generic/generic #dimm 1-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #2 pca9516 1, 2
-# chip drivers/generic/generic #dimm 0-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 0-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #3 pca9516 1, 3
-# chip drivers/generic/generic #dimm 3-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 3-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 3-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 3-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #4 pca9516 1, 4
-# chip drivers/generic/generic #dimm 2-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 2-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 2-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 2-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #5 pca9516 2, 2
-# chip drivers/i2c/lm63 #cpu1 temp
-# device i2c 4c on end
-# end
-# end
-# device i2c 18 on #6 pca9516 2, 3
-# chip drivers/i2c/lm63 #cpu2 temp
-# device i2c 4c on end
-# end
-# end
-# device i2c 18 on #7 pca9516 2, 4
-# chip drivers/i2c/lm63 #cpu3 temp
-# device i2c 4c on end
-# end
-# end
-# end # i2cmux
-# chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN...
-# device i2c 2e on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid
-# device i2c 2a on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x92
-# device i2c 49 on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x94
-# device i2c 4a on end
-# end
-# chip drivers/generic/generic # ??
-# device i2c 69 on end
-# end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 off end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 on end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 on end # dual core msr
-# device pnp 0.6 on end # cache size
-# device pnp 0.7 on end # tsc
-# end
-end
-
diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb
deleted file mode 100644
index 820fc3be2f..0000000000
--- a/src/mainboard/tyan/s4882/Options.lb
+++ /dev/null
@@ -1,252 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=22
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=8
-default CONFIG_MAX_PHYSICAL_CPUS=4
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-#default CONFIG_CONSOLE_VGA=1
-#default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PART_NUMBER="s4882"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00002000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end