summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
diff options
context:
space:
mode:
authorWard Vandewege <ward@gnu.org>2010-02-04 03:03:39 +0000
committerWard Vandewege <ward@gnu.org>2010-02-04 03:03:39 +0000
commitde7c6fa5fce39014800a50ef2a2173af44b7c3c1 (patch)
treecf92c7daf02856487d894079a016107bc041eb56 /src/mainboard/tyan
parent04d74b1fdd52acfa5d31fa3c5317dd562feac5fa (diff)
downloadcoreboot-de7c6fa5fce39014800a50ef2a2173af44b7c3c1.tar.xz
Revision 5051 broke Kconfig booting for the Tyan s2881 board. Up to 5050, there
were two SB_HT_CHAIN_ON_BUS0 sections in the mainboard Kconfig file - one setting the parameter to 0, the other setting it to 2. Revision 5051 removed one of the two SB_HT_CHAIN_ON_BUS0 sections - the wrong one. This patch fixes that. Revision 5051 removed the wrong setting because newconfig for this board was *also* wrong. This patch fixes that too. Tested on real hardware, both with Kconfig and newconfig. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5083 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan')
-rw-r--r--src/mainboard/tyan/s2881/Kconfig2
-rw-r--r--src/mainboard/tyan/s2881/Options.lb2
2 files changed, 2 insertions, 2 deletions
diff --git a/src/mainboard/tyan/s2881/Kconfig b/src/mainboard/tyan/s2881/Kconfig
index a299b03fa3..4ea0ea1605 100644
--- a/src/mainboard/tyan/s2881/Kconfig
+++ b/src/mainboard/tyan/s2881/Kconfig
@@ -24,7 +24,7 @@ config APIC_ID_OFFSET
config SB_HT_CHAIN_ON_BUS0
int
- default 0
+ default 2
depends on BOARD_TYAN_S2881
config LB_CKS_RANGE_END
diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb
index cde6d5adf1..59002d27de 100644
--- a/src/mainboard/tyan/s2881/Options.lb
+++ b/src/mainboard/tyan/s2881/Options.lb
@@ -128,7 +128,7 @@ default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=0
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1)
#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0