diff options
author | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 20:46:15 +0000 |
---|---|---|
committer | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 20:46:15 +0000 |
commit | d4b278c02c1da92219ebeb34204b9768934aeca3 (patch) | |
tree | 488d097cac9744cfc9b8ff7c89ce69bcb21370cb /src/mainboard/tyan | |
parent | 2e3757d11c565a8fe68dc2a2c34975e98304533c (diff) | |
download | coreboot-d4b278c02c1da92219ebeb34204b9768934aeca3.tar.xz |
AMD Rev F support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan')
-rw-r--r-- | src/mainboard/tyan/s2850/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s2875/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s2880/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s2881/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s2882/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s2891/Options.lb | 8 | ||||
-rw-r--r-- | src/mainboard/tyan/s2892/Options.lb | 8 | ||||
-rw-r--r-- | src/mainboard/tyan/s2895/Options.lb | 8 | ||||
-rw-r--r-- | src/mainboard/tyan/s4880/Options.lb | 6 | ||||
-rw-r--r-- | src/mainboard/tyan/s4882/Options.lb | 6 |
11 files changed, 36 insertions, 36 deletions
diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index d6db7c1c74..ca1aa186c7 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index 99a018c4e9..092aefb98c 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -123,7 +123,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -136,7 +136,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 23b239afb4..bcb7a1e4c2 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=0 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index bb92ecfd30..b1e5022c31 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 5dec67a947..da382282c9 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 ## ## Build code to setup a generic IOAPIC diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index dcff37450f..5ca7df6a34 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 9018364663..366b745151 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -53,7 +53,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -69,7 +69,7 @@ uses CONFIG_PCI_64BIT_PREF_MEM uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK @@ -137,7 +137,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -149,7 +149,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 7000126a5d..30e6d617c2 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -53,7 +53,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -63,7 +63,7 @@ uses CONFIG_USE_INIT uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY ## ROM_SIZE is the size of boot ROM that this board will use. @@ -129,7 +129,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -141,7 +141,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index c3f8ba3f8c..cd367ad029 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -52,7 +52,7 @@ uses CONFIG_GDB_STUB uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM @@ -66,7 +66,7 @@ uses LIFT_BSP_APIC_ID uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY ## ROM_SIZE is the size of boot ROM that this board will use. @@ -134,7 +134,7 @@ default CONFIG_LOGICAL_CPUS=1 #default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -146,7 +146,7 @@ default HT_CHAIN_UNITID_BASE=0x0 #default HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index 9cc8fc84f8..9e74b11214 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default CONFIG_PCI_ROM_RUN=1 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index 57e10153a1..cd31cfed6b 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000 #VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000 default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0 default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 |