[REMOVAL] tyan/s2885

As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.

Change-Id: Icfdcc5d6043987e22ef9b4db84847d62c91bd305
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12380
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

10 files changed, 0 insertions, 982 deletions

diff --git a/src/mainboard/tyan/s2885/Kconfig b/src/mainboard/tyan/s2885/Kconfig
deleted file mode 100644
index b218ab7eb6..0000000000
--- a/src/mainboard/tyan/s2885/Kconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-if BOARD_TYAN_S2885
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_AMD_SOCKET_940
-	select NORTHBRIDGE_AMD_AMDK8
-	select SOUTHBRIDGE_AMD_AMD8111
-	select SOUTHBRIDGE_AMD_AMD8131
-	select SOUTHBRIDGE_AMD_AMD8151
-	select HT_CHAIN_DISTRIBUTE
-	select SUPERIO_WINBOND_W83627HF
-	select HAVE_OPTION_TABLE
-	select HAVE_PIRQ_TABLE
-	select HAVE_MP_TABLE
-	select BOARD_ROMSIZE_KB_512
-	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
-	select QRANK_DIMM_SUPPORT
-
-config MAINBOARD_DIR
-	string
-	default tyan/s2885
-
-config APIC_ID_OFFSET
-	hex
-	default 0x10
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "S2885"
-
-config MAX_CPUS
-	int
-	default 4
-
-config MAX_PHYSICAL_CPUS
-	int
-	default 2
-
-config HT_CHAIN_UNITID_BASE
-	hex
-	default 0xa
-
-config HT_CHAIN_END_UNITID_BASE
-	hex
-	default 0x6
-
-config IRQ_SLOT_COUNT
-	int
-	default 11
-
-endif # BOARD_TYAN_S2885
diff --git a/src/mainboard/tyan/s2885/Kconfig.name b/src/mainboard/tyan/s2885/Kconfig.name
deleted file mode 100644
index 15d2333ebf..0000000000
--- a/src/mainboard/tyan/s2885/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_TYAN_S2885
-	bool "S2885 (Thunder K8W)"
diff --git a/src/mainboard/tyan/s2885/board_info.txt b/src/mainboard/tyan/s2885/board_info.txt
deleted file mode 100644
index 9a10c88301..0000000000
--- a/src/mainboard/tyan/s2885/board_info.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Board name: Thunder K8W (S2885)
-Category: desktop
-Board URL: http://www.tyan.com/archive/products/html/thunderk8w.html
-Release year: 2003
diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout
deleted file mode 100644
index 4e081ea1aa..0000000000
--- a/src/mainboard/tyan/s2885/cmos.layout
+++ /dev/null
@@ -1,60 +0,0 @@
-entries
-
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-388          4       r       0        reboot_bits
-392          3       e       5        baud_rate
-395          1       e       1        hw_scrubber
-396          1       e       1        interleave_chip_selects
-397          2       e       8        max_mem_clock
-399          1       e       2        multi_core
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-440          4       e       9        slow_cpu
-444          1       e       1        nmi
-445          1       e       1        iommu
-456          1       e       1        ECC_memory
-728        256       h       0        user_data
-984         16       h       0        check_sum
-# Reserve the extended AMD configuration registers
-1000        24       r       0        amd_reserved
-
-
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-5     0     115200
-5     1     57600
-5     2     38400
-5     3     19200
-5     4     9600
-5     5     4800
-5     6     2400
-5     7     1200
-6     6     Notice
-6     7     Info
-6     8     Debug
-6     9     Spew
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
-9     0     off
-9     1     87.5%
-9     2     75.0%
-9     3     62.5%
-9     4     50.0%
-9     5     37.5%
-9     6     25.0%
-9     7     12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/tyan/s2885/devicetree.cb b/src/mainboard/tyan/s2885/devicetree.cb
deleted file mode 100644
index 97a18e5a69..0000000000
--- a/src/mainboard/tyan/s2885/devicetree.cb
+++ /dev/null
@@ -1,122 +0,0 @@
-chip northbridge/amd/amdk8/root_complex
-        device cpu_cluster 0 on
-                chip cpu/amd/socket_940
-                        device lapic 0 on end
-                end
-        end
-	device domain 0 on
-		subsystemid 0x10f1 0x2885 inherit
-		chip northbridge/amd/amdk8
-			device pci 18.0 on # LDT0
-				chip southbridge/amd/amd8151
-					# the on/off keyword is mandatory
-					device pci 0.0 on end
-					device pci 1.0 on end
-				end
-			end
-			device pci 18.0 on end # LDT1
-			device pci 18.0 on #  northbridge
-				#  devices on link 2, link 2 == LDT 2
-				chip southbridge/amd/amd8131
-					# the on/off keyword is mandatory
-					device pci 0.0 on
-                                                device pci 9.0 on end # broadcom 5703
-					end
-					device pci 0.1 on end
-					device pci 1.0 on end
-					device pci 1.1 on end
-				end
-				chip southbridge/amd/amd8111
-					# this "device pci 0.0" is the parent the next one
-					# PCI bridge
-					device pci 0.0 on
-						device pci 0.0 on end
-						device pci 0.1 on end
-						device pci 0.2 off end
-						device pci 1.0 off end
-                                                device pci b.0 on end # SiI 3114
-					end
-					device pci 1.0 on
-						chip superio/winbond/w83627hf
-							device pnp 2e.0 on #  Floppy
-                	                 			io 0x60 = 0x3f0
-                	                			irq 0x70 = 6
-                	                			drq 0x74 = 2
-							end
-                	        			device pnp 2e.1 off #  Parallel Port
-                	                 			io 0x60 = 0x378
-                	                			irq 0x70 = 7
-							end
-                	        			device pnp 2e.2 on #  Com1
-                	                 			io 0x60 = 0x3f8
-                	                			irq 0x70 = 4
-							end
-                	        			device pnp 2e.3 on #  Com2
-                	                 			io 0x60 = 0x2f8
-                	                			irq 0x70 = 3
-							end
-                	        			device pnp 2e.5 on #  Keyboard
-                	                 			io 0x60 = 0x60
-                	                 			io 0x62 = 0x64
-                	                			irq 0x70 = 1
-								irq 0x72 = 12
-							end
-                	        			device pnp 2e.6 off #  CIR
-								io 0x60 = 0x100
-							end
-                	        			device pnp 2e.7 off #  GAME_MIDI_GIPO1
-								io 0x60 = 0x220
-								io 0x62 = 0x300
-								irq 0x70 = 9
-							end
-                	        			device pnp 2e.8 off end #  GPIO2
-                	        			device pnp 2e.9 off end #  GPIO3
-                	        			device pnp 2e.a off end #  ACPI
-                	        			device pnp 2e.b on #  HW Monitor
- 					 			io 0x60 = 0x290
-								irq 0x70 = 5
-                					end
-						end
-					end
-					device pci 1.1 on end
-					device pci 1.2 on end
-					device pci 1.3 on
-                                                chip drivers/generic/generic #dimm 0-0-0
-                                                        device i2c 50 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 0-0-1
-                                                        device i2c 51 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 0-1-0
-                                                        device i2c 52 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 0-1-1
-                                                        device i2c 53 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 1-0-0
-                                                        device i2c 54 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 1-0-1
-                                                        device i2c 55 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 1-1-0
-                                                        device i2c 56 on end
-                                                end
-                                                chip drivers/generic/generic #dimm 1-1-1
-                                                        device i2c 57 on end
-                                                end
-					end # acpi
-					device pci 1.5 on end
-					device pci 1.6 off end
-                	                register "ide0_enable" = "1"
-                	                register "ide1_enable" = "1"
-				end
-			end #  device pci 18.0
-
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end
-
-	end #domain
-end
diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c
deleted file mode 100644
index 2df51a08cd..0000000000
--- a/src/mainboard/tyan/s2885/get_bus_conf.c
+++ /dev/null
@@ -1,129 +0,0 @@
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-#include <stdlib.h>
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-//busnum is default
-unsigned char bus_8131_0 = 1;
-unsigned char bus_8131_1 = 2;
-unsigned char bus_8131_2 = 3;
-unsigned char bus_8111_0 = 1;
-unsigned char bus_8111_1 = 4;
-unsigned char bus_8151_0 = 5;
-unsigned char bus_8151_1 = 6;
-unsigned apicid_8111;
-unsigned apicid_8131_1;
-unsigned apicid_8131_2;
-
-unsigned pci1234x[] = {		//Here you only need to set value in pci1234 for HT-IO that could be installed or not
-	//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-	0x0000ff0,
-	0x0000ff0,
-//        0x0000ff0,
-//        0x0000ff0,
-//        0x0000ff0,
-//        0x0000ff0,
-//        0x0000ff0,
-//        0x0000ff0
-};
-
-unsigned hcdnx[] = {		//HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
-	0x20202020,
-	0x20202020,
-//        0x20202020,
-//        0x20202020,
-//        0x20202020,
-//        0x20202020,
-//        0x20202020,
-//        0x20202020,
-};
-
-unsigned sbdn3;
-unsigned sbdn5;
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
-
-	unsigned apicid_base;
-
-	device_t dev;
-	int i;
-
-	if (get_bus_conf_done == 1)
-		return;		//do it only once
-
-	get_bus_conf_done = 1;
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
-
-	get_sblk_pci1234();
-
-	sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
-	sbdn3 = sysconf.hcdn[0] & 0xff;
-	sbdn5 = sysconf.hcdn[1] & 0xff;
-
-	bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff;
-	bus_8111_0 = bus_8131_0;
-
-	/* 8111 */
-	dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0));
-	if (dev) {
-		bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-	} else {
-		printk(BIOS_DEBUG,
-		       "ERROR - could not find PCI %02x:03.0, using defaults\n",
-		       bus_8111_0);
-	}
-
-	/* 8131-1 */
-	dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0));
-	if (dev) {
-		bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-	} else {
-		printk(BIOS_DEBUG,
-		       "ERROR - could not find PCI %02x:01.0, using defaults\n",
-		       bus_8131_0);
-	}
-
-	/* 8132-2 */
-	dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0));
-	if (dev) {
-		bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-	} else {
-		printk(BIOS_DEBUG,
-		       "ERROR - could not find PCI %02x:02.0, using defaults\n",
-		       bus_8131_0);
-	}
-
-	/* HT chain 1 */
-	// it is on node0, so it must be there
-	bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff;
-	/* 8151 */
-	dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5 + 1, 0));
-
-	if (dev) {
-		bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-//              printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1);
-	}
-
-/*I/O APICs:	APIC ID	Version	State		Address*/
-	if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
-		apicid_base = get_apicid_base(3);
-	else
-		apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
-	apicid_8111 = apicid_base + 0;
-	apicid_8131_1 = apicid_base + 1;
-	apicid_8131_2 = apicid_base + 2;
-}
diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c
deleted file mode 100644
index dc74776107..0000000000
--- a/src/mainboard/tyan/s2885/irq_tables.c
+++ /dev/null
@@ -1,106 +0,0 @@
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
-		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
-		uint8_t slot, uint8_t rfu)
-{
-        pirq_info->bus = bus;
-        pirq_info->devfn = devfn;
-                pirq_info->irq[0].link = link0;
-                pirq_info->irq[0].bitmap = bitmap0;
-                pirq_info->irq[1].link = link1;
-                pirq_info->irq[1].bitmap = bitmap1;
-                pirq_info->irq[2].link = link2;
-                pirq_info->irq[2].bitmap = bitmap2;
-                pirq_info->irq[3].link = link3;
-                pirq_info->irq[3].bitmap = bitmap3;
-        pirq_info->slot = slot;
-        pirq_info->rfu = rfu;
-}
-
-extern  unsigned char bus_8131_0;
-extern  unsigned char bus_8131_1;
-extern  unsigned char bus_8131_2;
-extern  unsigned char bus_8111_0;
-extern  unsigned char bus_8111_1;
-extern  unsigned char bus_8151_0;
-extern  unsigned char bus_8151_1;
-
-extern  unsigned sbdn3;
-extern  unsigned sbdn5;
-
-
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
-	struct irq_routing_table *pirq;
-	struct irq_info *pirq_info;
-	unsigned slot_num;
-	uint8_t *v;
-
-        uint8_t sum=0;
-        int i;
-
-	get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
-
-        /* Align the table to be 16 byte aligned. */
-        addr += 15;
-        addr &= ~15;
-
-        /* This table must be between 0xf0000 & 0x100000 */
-        printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
-	pirq = (void *)(addr);
-	v = (uint8_t *)(addr);
-
-	pirq->signature = PIRQ_SIGNATURE;
-	pirq->version  = PIRQ_VERSION;
-
-	pirq->rtr_bus = bus_8111_0;
-	pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
-
-	pirq->exclusive_irqs = 0;
-
-	pirq->rtr_vendor = 0x1022;
-	pirq->rtr_device = 0x746b;
-
-	pirq->miniport_data = 0;
-
-	memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
-	pirq_info = (void *) ( &pirq->checksum + 1);
-	slot_num = 0;
-//pci bridge
-	write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-	pirq_info++; slot_num++;
-//pcix bridge
-//        write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-//        pirq_info++; slot_num++;
-//agp bridge
-        write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-
-        pirq_info++; slot_num++;
-
-	pirq->size = 32 + 16 * slot_num;
-
-        for (i = 0; i < pirq->size; i++)
-                sum += v[i];
-
-	sum = pirq->checksum - sum;
-
-        if (sum != pirq->checksum) {
-                pirq->checksum = sum;
-        }
-
-	printk(BIOS_INFO, "done.\n");
-
-	return	(unsigned long) pirq_info;
-
-}
diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c
deleted file mode 100644
index fe0f8d839a..0000000000
--- a/src/mainboard/tyan/s2885/mptable.c
+++ /dev/null
@@ -1,123 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-extern  unsigned char bus_8131_0;
-extern  unsigned char bus_8131_1;
-extern  unsigned char bus_8131_2;
-extern  unsigned char bus_8111_0;
-extern  unsigned char bus_8111_1;
-extern  unsigned char bus_8151_0;
-extern  unsigned char bus_8151_1;
-extern  unsigned apicid_8111;
-extern  unsigned apicid_8131_1;
-extern  unsigned apicid_8131_2;
-
-extern  unsigned sbdn3;
-extern  unsigned sbdn5;
-
-static void *smp_write_config_table(void *v)
-{
-        struct mp_config_table *mc;
-	int i, bus_isa;
-
-        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
-	mptable_init(mc, LOCAL_APIC_ADDR);
-
-        smp_write_processors(mc);
-
-	get_bus_conf();
-
-	mptable_write_buses(mc, NULL, &bus_isa);
-
-/*I/O APICs:	APIC ID	Version	State		Address*/
-	smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR); //8111
-        {
-                device_t dev;
-		struct resource *res;
-                dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
-                if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, apicid_8131_1, 0x11,
-						 res2mmio(res, 0, 0));
-			}
-                }
-                dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
-                if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, apicid_8131_2, 0x11,
-						 res2mmio(res, 0, 0));
-			}
-                }
-	}
-
-	mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0);
-
-/*I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN# */
-//??? What
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13);
-//Onboard AMD AC97 Audio
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|1, apicid_8111, 0x11);
-// Onboard AMD USB
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
-
-//  AGP Display Adapter
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10);
-
-//Onboard Serial ATA
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x11);
-//Onboard Firewire
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x13);
-//Onboard Broadcom NIC
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0);
-
-//Slot 5 PCI 32
-        for(i=0;i<4;i++) {
-                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|i, apicid_8111, 0x10 + (0+i)%4); //16
-        }
-
-
-//Slot 3 PCIX 100/66
-        for(i=0;i<4;i++) {
-                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (3+i)%4); //27
-        }
-
-
-//Slot 4 PCIX 100/66
-        for(i=0;i<4;i++) {
-                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|i, apicid_8131_1, (2+i)%4); //26
-        }
-
-
-//Slot 1 PCI-X 133/100/66
-        for(i=0;i<4;i++) {
-                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (0+i)%4); //28
-        }
-
-
-//Slot 2 PCI-X 133/100/66
-        for(i=0;i<4;i++) {
-                smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (1+i)%4); //29
-        }
-
-/*Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#*/
-	mptable_lintsrc(mc, bus_isa);
-	/* There is no extension information... */
-
-	/* Compute the checksums */
-	return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
-	void *v;
-	v = smp_write_floating_table(addr, 0);
-	return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c
deleted file mode 100644
index cac1b22137..0000000000
--- a/src/mainboard/tyan/s2885/resourcemap.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Tyan S2885 needs a different resource map
- *
- */
-
-static void setup_s2885_resource_map(void)
-{
-	static const unsigned int register_values[] = {
-		/* Careful set limit registers before base registers which contain the enables */
-		/* DRAM Limit i Registers
-		 * F1:0x44 i = 0
-		 * F1:0x4C i = 1
-		 * F1:0x54 i = 2
-		 * F1:0x5C i = 3
-		 * F1:0x64 i = 4
-		 * F1:0x6C i = 5
-		 * F1:0x74 i = 6
-		 * F1:0x7C i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 3] Reserved
-		 * [10: 8] Interleave select
-		 *	   specifies the values of A[14:12] to use with interleave enable.
-		 * [15:11] Reserved
-		 * [31:16] DRAM Limit Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40 bit  address
-		 *	   that define the end of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-		PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-		PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-		PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-		PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-		PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-		PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-		/* DRAM Base i Registers
-		 * F1:0x40 i = 0
-		 * F1:0x48 i = 1
-		 * F1:0x50 i = 2
-		 * F1:0x58 i = 3
-		 * F1:0x60 i = 4
-		 * F1:0x68 i = 5
-		 * F1:0x70 i = 6
-		 * F1:0x78 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 7: 2] Reserved
-		 * [10: 8] Interleave Enable
-		 *	   000 = No interleave
-		 *	   001 = Interleave on A[12] (2 nodes)
-		 *	   010 = reserved
-		 *	   011 = Interleave on A[12] and A[14] (4 nodes)
-		 *	   100 = reserved
-		 *	   101 = reserved
-		 *	   110 = reserved
-		 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-		 * [15:11] Reserved
-		 * [13:16] DRAM Base Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40-bit address
-		 *	   that define the start of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
-		/* Memory-Mapped I/O Limit i Registers
-		 * F1:0x84 i = 0
-		 * F1:0x8C i = 1
-		 * F1:0x94 i = 2
-		 * F1:0x9C i = 3
-		 * F1:0xA4 i = 4
-		 * F1:0xAC i = 5
-		 * F1:0xB4 i = 6
-		 * F1:0xBC i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = Reserved
-		 * [ 6: 6] Reserved
-		 * [ 7: 7] Non-Posted
-		 *	   0 = CPU writes may be posted
-		 *	   1 = CPU writes must be non-posted
-		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-		 *	   This field defines the upp adddress bits of a 40-bit address that
-		 *	   defines the end of a memory-mapped I/O region n
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
-
-		/* Memory-Mapped I/O Base i Registers
-		 * F1:0x80 i = 0
-		 * F1:0x88 i = 1
-		 * F1:0x90 i = 2
-		 * F1:0x98 i = 3
-		 * F1:0xA0 i = 4
-		 * F1:0xA8 i = 5
-		 * F1:0xB0 i = 6
-		 * F1:0xB8 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Cpu Disable
-		 *	   0 = Cpu can use this I/O range
-		 *	   1 = Cpu requests do not use this I/O range
-		 * [ 3: 3] Lock
-		 *	   0 = base/limit registers i are read/write
-		 *	   1 = base/limit registers i are read-only
-		 * [ 7: 4] Reserved
-		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-		 *	   This field defines the upper address bits of a 40bit address
-		 *	   that defines the start of memory-mapped I/O region i
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
-		/* PCI I/O Limit i Registers
-		 * F1:0xC4 i = 0
-		 * F1:0xCC i = 1
-		 * F1:0xD4 i = 2
-		 * F1:0xDC i = 3
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = reserved
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Limit Address i
-		 *	   This field defines the end of PCI I/O region n
-		 * [31:25] Reserved
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
-		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
-		/* PCI I/O Base i Registers
-		 * F1:0xC0 i = 0
-		 * F1:0xC8 i = 1
-		 * F1:0xD0 i = 2
-		 * F1:0xD8 i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 3: 2] Reserved
-		 * [ 4: 4] VGA Enable
-		 *	   0 = VGA matches Disabled
-		 *	   1 = matches all address < 64K and where A[9:0] is in the
-		 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-		 * [ 5: 5] ISA Enable
-		 *	   0 = ISA matches Disabled
-		 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-		 *	       from matching agains this base/limit pair
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Base i
-		 *	   This field defines the start of PCI I/O region n
-		 * [31:25] Reserved
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
-		PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
-		/* Config Base and Limit i Registers
-		 * F1:0xE0 i = 0
-		 * F1:0xE4 i = 1
-		 * F1:0xE8 i = 2
-		 * F1:0xEC i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Device Number Compare Enable
-		 *	   0 = The ranges are based on bus number
-		 *	   1 = The ranges are ranges of devices on bus 0
-		 * [ 3: 3] Reserved
-		 * [ 6: 4] Destination Node
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 7] Reserved
-		 * [ 9: 8] Destination Link
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 - Reserved
-		 * [15:10] Reserved
-		 * [23:16] Bus Number Base i
-		 *	   This field defines the lowest bus number in configuration region i
-		 * [31:24] Bus Number Limit i
-		 *	   This field defines the highest bus number in configuration regin i
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000203, // AMD 8111 on link2 of CPU 0
-//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070003, // AMD 8151 on link0 of CPU 0
-		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-	};
-
-	int max;
-	max = ARRAY_SIZE(register_values);
-	setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c
deleted file mode 100644
index fdf9606c47..0000000000
--- a/src/mainboard/tyan/s2885/romstage.c
+++ /dev/null
@@ -1,121 +0,0 @@
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <lib.h>
-#include <spd.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/early_smbus.c"
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627hf/w83627hf.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "southbridge/amd/amd8111/early_ctrl.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void memreset_setup(void)
-{
-   if (is_cpu_pre_c0())
-        outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
-   else
-        outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
-   outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-   if (is_cpu_pre_c0()) {
-        udelay(800);
-        outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
-        udelay(90);
-   }
-}
-
-static void activate_spd_rom(const struct mem_controller *ctrl) { }
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	static const uint16_t spd_addr [] = {
-			DIMM0, DIMM2, 0, 0,
-			DIMM1, DIMM3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-			DIMM4, DIMM6, 0, 0,
-			DIMM5, DIMM7, 0, 0,
-#endif
-	};
-
-        int needs_reset;
-        unsigned bsp_apicid = 0, nodes;
-        struct mem_controller ctrl[8];
-
-        if (bist == 0)
-                bsp_apicid = init_cpus(cpu_init_detectedx);
-
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-	console_init();
-
-//	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-        setup_s2885_resource_map();
-#if 0
-        dump_pci_device(PCI_DEV(0, 0x18, 0));
-	dump_pci_device(PCI_DEV(0, 0x19, 0));
-#endif
-
-	needs_reset = setup_coherent_ht_domain();
-
-        wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
-        // It is said that we should start core1 after all core0 launched
-        start_other_cores();
-        wait_all_other_cores_started(bsp_apicid);
-#endif
-
-        needs_reset |= ht_setup_chains_x();
-
-       	if (needs_reset) {
-               	printk(BIOS_INFO, "ht reset -\n");
-               	soft_reset();
-       	}
-
-        allow_all_aps_stop(bsp_apicid);
-
-        nodes = get_nodes();
-        //It's the time to set ctrl now;
-        fill_mem_ctrl(nodes, ctrl, spd_addr);
-
-        enable_smbus();
-
-        memreset_setup();
-        sdram_initialize(nodes, ctrl);
-
-#if 0
-	dump_pci_devices();
-#endif
-
-	post_cache_as_ram();
-}