diff options
| author | Myles Watson <mylesgw@gmail.com> | 2009-10-15 13:35:47 +0000 |
|---|---|---|
| committer | Myles Watson <mylesgw@gmail.com> | 2009-10-15 13:35:47 +0000 |
| commit | b8e2027be817159d4606f991475b59fc36b0242d (patch) | |
| tree | 1ab06caebfc37dbff884d916c43cca6b9562ae85 /src/mainboard/tyan | |
| parent | 45b811b13552a94af4713b77613d377561e4ef26 (diff) | |
| download | coreboot-b8e2027be817159d4606f991475b59fc36b0242d.tar.xz | |
Add CONFIG_GENERATE_* for tables so that the user can select which tables not
to build, but by default all the tables that are available are built.
Make PIRQ table build for qemu.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan')
52 files changed, 150 insertions, 137 deletions
diff --git a/src/mainboard/tyan/Makefile.s289x.inc b/src/mainboard/tyan/Makefile.s289x.inc index fc78b661fb..4c0ea9829d 100644 --- a/src/mainboard/tyan/Makefile.s289x.inc +++ b/src/mainboard/tyan/Makefile.s289x.inc @@ -27,10 +27,10 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s1846/Config.lb b/src/mainboard/tyan/s1846/Config.lb index 2a5c8b26ec..d98368b1cf 100644 --- a/src/mainboard/tyan/s1846/Config.lb +++ b/src/mainboard/tyan/s1846/Config.lb @@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1 arch i386 end driver mainboard.o -if CONFIG_HAVE_PIRQ_TABLE +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb index 6a56131e91..bf30506261 100644 --- a/src/mainboard/tyan/s1846/Options.lb +++ b/src/mainboard/tyan/s1846/Options.lb @@ -18,8 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -45,7 +45,7 @@ uses CONFIG_ROMBASE uses CONFIG_RAMBASE uses CONFIG_XIP_ROM_SIZE uses CONFIG_XIP_ROM_BASE -uses CONFIG_HAVE_MP_TABLE +uses CONFIG_GENERATE_MP_TABLE uses CONFIG_CROSS_COMPILE uses CC uses HOSTCC @@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN default CONFIG_ROM_SIZE = 256 * 1024 default CONFIG_HAVE_FALLBACK_BOOT = 1 -default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_GENERATE_MP_TABLE = 0 default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default CONFIG_HAVE_PIRQ_TABLE = 0 +default CONFIG_GENERATE_PIRQ_TABLE = 0 default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. default CONFIG_ROM_IMAGE_SIZE = 36 * 1024 diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index 9cc0bc3aea..c15d0917a3 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -10,8 +10,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig index e39c5ea98a..33107762f8 100644 --- a/src/mainboard/tyan/s2735/Kconfig +++ b/src/mainboard/tyan/s2735/Kconfig @@ -7,6 +7,7 @@ config BOARD_TYAN_S2735 select SOUTHBRIDGE_INTEL_I82801ER select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select UDELAY_TSC select HAVE_OPTION_TABLE select USE_DCACHE_RAM diff --git a/src/mainboard/tyan/s2735/Makefile.inc b/src/mainboard/tyan/s2735/Makefile.inc index 0d3f8965e8..3b05dac815 100644 --- a/src/mainboard/tyan/s2735/Makefile.inc +++ b/src/mainboard/tyan/s2735/Makefile.inc @@ -25,8 +25,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index 55c625ab4f..61933d2233 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -97,14 +97,14 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index 59dcd8e557..19f637fd29 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2850/Kconfig b/src/mainboard/tyan/s2850/Kconfig index 6103be8826..bb36edc650 100644 --- a/src/mainboard/tyan/s2850/Kconfig +++ b/src/mainboard/tyan/s2850/Kconfig @@ -7,7 +7,8 @@ config BOARD_TYAN_S2850 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index 41590cc3e9..a53d5b7272 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -86,14 +86,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb index 73481883f8..63ea6be2cb 100644 --- a/src/mainboard/tyan/s2875/Config.lb +++ b/src/mainboard/tyan/s2875/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2875/Kconfig b/src/mainboard/tyan/s2875/Kconfig index 0e04059031..15fb3c6d74 100644 --- a/src/mainboard/tyan/s2875/Kconfig +++ b/src/mainboard/tyan/s2875/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2875 select SOUTHBRIDGE_AMD_AMD8151 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index df3a035d49..51913e30fb 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -87,14 +87,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 3ca46b67bb..692184b18e 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2880/Kconfig b/src/mainboard/tyan/s2880/Kconfig index 01fbdf8340..0caae162d1 100644 --- a/src/mainboard/tyan/s2880/Kconfig +++ b/src/mainboard/tyan/s2880/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2880 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2880/Makefile.inc b/src/mainboard/tyan/s2880/Makefile.inc index d6fcb7b33a..9398e1912c 100644 --- a/src/mainboard/tyan/s2880/Makefile.inc +++ b/src/mainboard/tyan/s2880/Makefile.inc @@ -26,10 +26,10 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 4255614e97..c41e03f356 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -86,14 +86,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 6480067300..92f50f8eff 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2881/Kconfig b/src/mainboard/tyan/s2881/Kconfig index cf236b3034..1a2bb09a36 100644 --- a/src/mainboard/tyan/s2881/Kconfig +++ b/src/mainboard/tyan/s2881/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2881 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index c65ef5f2fe..cde6d5adf1 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -91,14 +91,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 687169622a..34b2e82a74 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2882/Kconfig b/src/mainboard/tyan/s2882/Kconfig index db8e17c79d..84c9a75b72 100644 --- a/src/mainboard/tyan/s2882/Kconfig +++ b/src/mainboard/tyan/s2882/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2882 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2882/Makefile.inc b/src/mainboard/tyan/s2882/Makefile.inc index d6fcb7b33a..9398e1912c 100644 --- a/src/mainboard/tyan/s2882/Makefile.inc +++ b/src/mainboard/tyan/s2882/Makefile.inc @@ -26,10 +26,10 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o #driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index b17bc6b9c0..d4ff6fef88 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -86,14 +86,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 74f9c53e65..012b09774b 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -12,8 +12,8 @@ driver mainboard.o #dir /drivers/si/3114 object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2885/Kconfig b/src/mainboard/tyan/s2885/Kconfig index 89a86a9b06..1f868bc645 100644 --- a/src/mainboard/tyan/s2885/Kconfig +++ b/src/mainboard/tyan/s2885/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2885 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index cacfc725ea..df76f5c93c 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -97,14 +97,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 2266929db5..3f051a0da4 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -16,11 +16,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.dsl" diff --git a/src/mainboard/tyan/s2891/Kconfig b/src/mainboard/tyan/s2891/Kconfig index 98defd5d41..535b0f23f4 100644 --- a/src/mainboard/tyan/s2891/Kconfig +++ b/src/mainboard/tyan/s2891/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2891 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 9822e394d6..08a1a081f1 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,7 +28,7 @@ uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT @@ -109,19 +109,19 @@ default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 3779de2849..9dcb7dae55 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -17,11 +17,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.dsl" diff --git a/src/mainboard/tyan/s2892/Kconfig b/src/mainboard/tyan/s2892/Kconfig index 72986e57ec..421dc2e937 100644 --- a/src/mainboard/tyan/s2892/Kconfig +++ b/src/mainboard/tyan/s2892/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2892 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 5079f543e1..4ec42e5932 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -28,7 +28,7 @@ uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT @@ -103,19 +103,19 @@ default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 911e279383..c4f24f4e8d 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -12,11 +12,11 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o -if CONFIG_HAVE_ACPI_TABLES +if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o makerule dsdt.c depends "$(CONFIG_MAINBOARD)/dsdt.dsl" diff --git a/src/mainboard/tyan/s2895/Kconfig b/src/mainboard/tyan/s2895/Kconfig index e34ed1d3d9..12427418be 100644 --- a/src/mainboard/tyan/s2895/Kconfig +++ b/src/mainboard/tyan/s2895/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2895 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_SMSC_LPC47B397 - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select SERIAL_CPU_INIT select AP_CODE_IN_CAR select HAVE_ACPI_TABLES diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 499f269c19..de9e136f2d 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_USE_FAILOVER_IMAGE @@ -31,7 +31,7 @@ uses CONFIG_USE_OPTION_TABLE uses CONFIG_LB_CKS_RANGE_START uses CONFIG_LB_CKS_RANGE_END uses CONFIG_LB_CKS_LOC -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT @@ -116,19 +116,19 @@ default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_GENERATE_ACPI_TABLES=1 default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb index c8f3a8f041..a52a70b235 100644 --- a/src/mainboard/tyan/s2912/Config.lb +++ b/src/mainboard/tyan/s2912/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig index ff05979f74..f85fc02f79 100644 --- a/src/mainboard/tyan/s2912/Kconfig +++ b/src/mainboard/tyan/s2912/Kconfig @@ -8,11 +8,11 @@ config BOARD_TYAN_S2912 select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_HIGH_TABLES select IOAPIC select MEM_TRAIN_SEQ select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/tyan/s2912/Makefile.inc b/src/mainboard/tyan/s2912/Makefile.inc index 83271c2a4c..acfa14f2e4 100644 --- a/src/mainboard/tyan/s2912/Makefile.inc +++ b/src/mainboard/tyan/s2912/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb index 83c7424a94..439c6cf3eb 100644 --- a/src/mainboard/tyan/s2912/Options.lb +++ b/src/mainboard/tyan/s2912/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -149,17 +149,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=3 diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb index be6662f889..84f6d1cde5 100644 --- a/src/mainboard/tyan/s2912_fam10/Config.lb +++ b/src/mainboard/tyan/s2912_fam10/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s2912_fam10/Kconfig b/src/mainboard/tyan/s2912_fam10/Kconfig index 9b1eb2a7fa..c2e22024c8 100644 --- a/src/mainboard/tyan/s2912_fam10/Kconfig +++ b/src/mainboard/tyan/s2912_fam10/Kconfig @@ -8,7 +8,8 @@ config BOARD_TYAN_S2912_FAM10 select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/tyan/s2912_fam10/Makefile.inc b/src/mainboard/tyan/s2912_fam10/Makefile.inc index 83271c2a4c..acfa14f2e4 100644 --- a/src/mainboard/tyan/s2912_fam10/Makefile.inc +++ b/src/mainboard/tyan/s2912_fam10/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o #needed by irq_tables and mptable and acpi_tables obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb index 3c7cc8487d..61c647cb86 100644 --- a/src/mainboard/tyan/s2912_fam10/Options.lb +++ b/src/mainboard/tyan/s2912_fam10/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -151,17 +151,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## extra SSDT num default CONFIG_ACPI_SSDTX_NUM=31 diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index c85db4b9b2..1838733d7c 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -11,8 +11,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s4880/Kconfig b/src/mainboard/tyan/s4880/Kconfig index 1a0c9fe4d7..bc68364a1f 100644 --- a/src/mainboard/tyan/s4880/Kconfig +++ b/src/mainboard/tyan/s4880/Kconfig @@ -9,6 +9,7 @@ config BOARD_TYAN_S4880 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/tyan/s4880/Makefile.inc b/src/mainboard/tyan/s4880/Makefile.inc index 86d71e152b..c382cc681d 100644 --- a/src/mainboard/tyan/s4880/Makefile.inc +++ b/src/mainboard/tyan/s4880/Makefile.inc @@ -21,8 +21,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index a238c0aac1..05490b785f 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -90,14 +90,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=22 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index 7da0a6773a..f28c752078 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -11,8 +11,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT diff --git a/src/mainboard/tyan/s4882/Kconfig b/src/mainboard/tyan/s4882/Kconfig index af52ebd9a8..fc67007d78 100644 --- a/src/mainboard/tyan/s4882/Kconfig +++ b/src/mainboard/tyan/s4882/Kconfig @@ -9,6 +9,7 @@ config BOARD_TYAN_S4882 select SOUTHBRIDGE_AMD_AMD8131 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/tyan/s4882/Makefile.inc b/src/mainboard/tyan/s4882/Makefile.inc index 86d71e152b..c382cc681d 100644 --- a/src/mainboard/tyan/s4882/Makefile.inc +++ b/src/mainboard/tyan/s4882/Makefile.inc @@ -21,8 +21,8 @@ driver-y += mainboard.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index 169b85c755..820fc3be2f 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -90,14 +90,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=22 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table |