diff options
| author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-24 00:04:22 +0300 |
|---|---|---|
| committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-31 03:41:11 +0000 |
| commit | 1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch) | |
| tree | bf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard | |
| parent | f054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff) | |
| download | coreboot-1740230ace3aeede3a7ee5cadd1e17744cda07b3.tar.xz | |
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard')
519 files changed, 0 insertions, 68466 deletions
diff --git a/src/mainboard/amd/dbm690t/Kconfig b/src/mainboard/amd/dbm690t/Kconfig deleted file mode 100644 index 77bafc5cfb..0000000000 --- a/src/mainboard/amd/dbm690t/Kconfig +++ /dev/null @@ -1,51 +0,0 @@ -if BOARD_AMD_DBM690T - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default amd/dbm690t - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "DBM690T" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_AMD_DBM690T diff --git a/src/mainboard/amd/dbm690t/Kconfig.name b/src/mainboard/amd/dbm690t/Kconfig.name deleted file mode 100644 index cbc2900410..0000000000 --- a/src/mainboard/amd/dbm690t/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_DBM690T - bool "DBM690T (Herring)" diff --git a/src/mainboard/amd/dbm690t/acpi/ide.asl b/src/mainboard/amd/dbm690t/acpi/ide.asl deleted file mode 100644 index d5badfcb6b..0000000000 --- a/src/mainboard/amd/dbm690t/acpi/ide.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/amd/dbm690t/acpi/routing.asl b/src/mainboard/amd/dbm690t/acpi/routing.asl deleted file mode 100644 index bcb14e7e37..0000000000 --- a/src/mainboard/amd/dbm690t/acpi/routing.asl +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/amd/dbm690t/acpi/sata.asl b/src/mainboard/amd/dbm690t/acpi/sata.asl deleted file mode 100644 index 474e5ed6d2..0000000000 --- a/src/mainboard/amd/dbm690t/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/amd/dbm690t/acpi/usb.asl b/src/mainboard/amd/dbm690t/acpi/usb.asl deleted file mode 100644 index 638690697c..0000000000 --- a/src/mainboard/amd/dbm690t/acpi/usb.asl +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/amd/dbm690t/acpi_tables.c b/src/mainboard/amd/dbm690t/acpi_tables.c deleted file mode 100644 index e19969219e..0000000000 --- a/src/mainboard/amd/dbm690t/acpi_tables.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/amd/dbm690t/board_info.txt b/src/mainboard/amd/dbm690t/board_info.txt deleted file mode 100644 index f6b1ab16d9..0000000000 --- a/src/mainboard/amd/dbm690t/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: dbM690T (Herring) -Category: eval -Board URL: http://support.amd.com/us/ChipsetMotherboard_TechDocs/42655A_S1DBM680T_PB.pdf diff --git a/src/mainboard/amd/dbm690t/cmos.layout b/src/mainboard/amd/dbm690t/cmos.layout deleted file mode 100644 index 104d51f4c2..0000000000 --- a/src/mainboard/amd/dbm690t/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/dbm690t/devicetree.cb b/src/mainboard/amd/dbm690t/devicetree.cb deleted file mode 100644 index 898537b155..0000000000 --- a/src/mainboard/amd/dbm690t/devicetree.cb +++ /dev/null @@ -1,121 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/amd/dbm690t/dsdt.asl b/src/mainboard/amd/dbm690t/dsdt.asl deleted file mode 100644 index 748c9fb879..0000000000 --- a/src/mainboard/amd/dbm690t/dsdt.asl +++ /dev/null @@ -1,1674 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/sb600/sb600.h> - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.HPTM) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/amd/dbm690t/fadt.c b/src/mainboard/amd/dbm690t/fadt.c deleted file mode 100644 index b397f52aea..0000000000 --- a/src/mainboard/amd/dbm690t/fadt.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1 << 3 | 0 << 2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1 << 1 | 1 << 3| 1 << 5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/amd/dbm690t/get_bus_conf.c b/src/mainboard/amd/dbm690t/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/amd/dbm690t/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/amd/dbm690t/irq_tables.c b/src/mainboard/amd/dbm690t/irq_tables.c deleted file mode 100644 index 4c2a48dff7..0000000000 --- a/src/mainboard/amd/dbm690t/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/dbm690t/mainboard.c b/src/mainboard/amd/dbm690t/mainboard.c deleted file mode 100644 index e3dfbc529a..0000000000 --- a/src/mainboard/amd/dbm690t/mainboard.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - -/******************************************************** -* dbm690t uses a BCM5789 as on-board NIC. -* It has a pin named LOW_POWER to enable it into LOW POWER state. -* In order to run NIC, we should let it out of Low power state. This pin is -* controlled by sb600 GPM3. -* RRG4.2.3 GPM as GPIO -* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers: -* I/O C50, C51, C52, PM I/O94, 95, 96. -* RRG4.2.3.1 GPM pins as Input -* RRG4.2.3.2 GPM pins as Output -********************************************************/ -static void enable_onboard_nic(void) -{ - u8 byte; - - printk(BIOS_INFO, "%s.\n", __func__); - - /* set index register 0C50h to 13h (miscellaneous control) */ - outb(0x13, 0xC50); /* CMIndex */ - - /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */ - byte = inb(0xC51); - byte &= 0x3F; - byte |= 0x40; - outb(byte, 0xC51); - - /* set GPM port 0C52h bit 3 to 0 to enable output for GPM3 */ - byte = inb(0xC52); - byte &= ~0x8; - outb(byte, 0xC52); - - /* set CM data register 0C51h bits [7:6] to 10b to set Output state control */ - byte = inb(0xC51); - byte &= 0x3F; - byte |= 0x80; /* 7:6=10 */ - outb(byte, 0xC51); - - /* set GPM port 0C52h bit 3 to 0 to output 0 on GPM3 */ - byte = inb(0xC52); - byte &= ~0x8; - outb(byte, 0xC52); -} - -/******************************************************** -* dbm690t uses SB600 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - struct device *sm_dev; - struct device *ide_dev; - - printk(BIOS_INFO, "%s.\n", __func__); - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - struct device *sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in dbm690t board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard DBM690T Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - get_ide_dma66(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/dbm690t/mptable.c b/src/mainboard/amd/dbm690t/mptable.c deleted file mode 100644 index af67c5413d..0000000000 --- a/src/mainboard/amd/dbm690t/mptable.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/dbm690t/resourcemap.c b/src/mainboard/amd/dbm690t/resourcemap.c deleted file mode 100644 index 7d13a6550c..0000000000 --- a/src/mainboard/amd/dbm690t/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_dbm690t_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c deleted file mode 100644 index e1c92ac7b6..0000000000 --- a/src/mainboard/amd/dbm690t/romstage.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <spd.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_dbm690t_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - rs690_before_pci_init(); - sb600_before_pci_init(); -} diff --git a/src/mainboard/amd/mahogany/Kconfig b/src/mainboard/amd/mahogany/Kconfig deleted file mode 100644 index 8861b4aad5..0000000000 --- a/src/mainboard/amd/mahogany/Kconfig +++ /dev/null @@ -1,66 +0,0 @@ -if BOARD_AMD_MAHOGANY - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_ITE_IT8718F - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select LIFT_BSP_APIC_ID - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_1024 - select GFXUMA - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default amd/mahogany - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MAHOGANY" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config VGA_BIOS_ID - string - default "1002,9615" - -endif # BOARD_AMD_MAHOGANY diff --git a/src/mainboard/amd/mahogany/Kconfig.name b/src/mainboard/amd/mahogany/Kconfig.name deleted file mode 100644 index 5dde9cb718..0000000000 --- a/src/mainboard/amd/mahogany/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_MAHOGANY - bool "Mahogany" diff --git a/src/mainboard/amd/mahogany/acpi/ide.asl b/src/mainboard/amd/mahogany/acpi/ide.asl deleted file mode 100644 index 694ab235b6..0000000000 --- a/src/mainboard/amd/mahogany/acpi/ide.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0, Serialized) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, Serialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/amd/mahogany/acpi/routing.asl b/src/mainboard/amd/mahogany/acpi/routing.asl deleted file mode 100644 index ab168ce4fc..0000000000 --- a/src/mainboard/amd/mahogany/acpi/routing.asl +++ /dev/null @@ -1,307 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0012FFFF, 2, INTC, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTD, 0 }, - Package(){0x0013FFFF, 2, INTA, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0012FFFF, 2, 0, 18 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0013FFFF, 2, 0, 16 }, - - /* Package(){0x00140000, 0, 0, 16 }, */ - - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/amd/mahogany/acpi/sata.asl b/src/mainboard/amd/mahogany/acpi/sata.asl deleted file mode 100644 index cb9b221ba3..0000000000 --- a/src/mainboard/amd/mahogany/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/amd/mahogany/acpi/usb.asl b/src/mainboard/amd/mahogany/acpi/usb.asl deleted file mode 100644 index d4fc433beb..0000000000 --- a/src/mainboard/amd/mahogany/acpi/usb.asl +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/amd/mahogany/acpi_tables.c b/src/mainboard/amd/mahogany/acpi_tables.c deleted file mode 100644 index 26e20221a0..0000000000 --- a/src/mainboard/amd/mahogany/acpi_tables.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <southbridge/amd/sb700/sb700.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/amd/mahogany/board_info.txt b/src/mainboard/amd/mahogany/board_info.txt deleted file mode 100644 index 979c7c23b5..0000000000 --- a/src/mainboard/amd/mahogany/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: DB780E (Mahogany) -Category: eval -ROM protocol: SPI diff --git a/src/mainboard/amd/mahogany/cmos.layout b/src/mainboard/amd/mahogany/cmos.layout deleted file mode 100644 index e22e68a15a..0000000000 --- a/src/mainboard/amd/mahogany/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/mahogany/devicetree.cb b/src/mainboard/amd/mahogany/devicetree.cb deleted file mode 100644 index 56efd84247..0000000000 --- a/src/mainboard/amd/mahogany/devicetree.cb +++ /dev/null @@ -1,121 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "1" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8718f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8718f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/amd/mahogany/dsdt.asl b/src/mainboard/amd/mahogany/dsdt.asl deleted file mode 100644 index dfffa871e5..0000000000 --- a/src/mainboard/amd/mahogany/dsdt.asl +++ /dev/null @@ -1,1690 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBX) - Store(HPBA, HPBX) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/amd/mahogany/get_bus_conf.c b/src/mainboard/amd/mahogany/get_bus_conf.c deleted file mode 100644 index 64b3ed7032..0000000000 --- a/src/mainboard/amd/mahogany/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/amd/mahogany/irq_tables.c b/src/mainboard/amd/mahogany/irq_tables.c deleted file mode 100644 index ef2a3ec45c..0000000000 --- a/src/mainboard/amd/mahogany/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/mahogany/mainboard.c b/src/mainboard/amd/mahogany/mainboard.c deleted file mode 100644 index 91b2533fe0..0000000000 --- a/src/mainboard/amd/mahogany/mainboard.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); -/* - * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to - * pull it up before training the slot. - ***/ -void set_pcie_dereset() -{ - u16 word; - struct device *sm_dev; - /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - word = pci_read_config16(sm_dev, 0xA8); - word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */ - word &= ~((1 << 8) | (1 << 10)); - pci_write_config16(sm_dev, 0xA8, word); -} - -void set_pcie_reset() -{ - u16 word; - struct device *sm_dev; - /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - word = pci_read_config16(sm_dev, 0xA8); - word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */ - word &= ~((1 << 8) | (1 << 10)); - pci_write_config16(sm_dev, 0xA8, word); -} - -u8 is_dev3_present(void) -{ - return 0; -} -/************************************************* -* enable the dedicated function in mahogany board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/mahogany/mptable.c b/src/mainboard/amd/mahogany/mptable.c deleted file mode 100644 index a5d66785a9..0000000000 --- a/src/mainboard/amd/mahogany/mptable.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/mahogany/resourcemap.c b/src/mainboard/amd/mahogany/resourcemap.c deleted file mode 100644 index 5c2932e1e1..0000000000 --- a/src/mainboard/amd/mahogany/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mahogany_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c deleted file mode 100644 index 979904a06f..0000000000 --- a/src/mainboard/amd/mahogany/romstage.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8718f/it8718f.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <southbridge/amd/sb700/sb700.h> -#include <southbridge/amd/sb700/smbus.h> -#include <northbridge/amd/amdk8/f.h> - -unsigned get_sbdn(unsigned bus); - -#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include <southbridge/amd/rs780/rs780.h> -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb7xx_51xx_lpc_port80(); */ - sb7xx_51xx_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_mahogany_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs780_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - sb7xx_51xx_before_pci_init(); -} diff --git a/src/mainboard/amd/pistachio/Kconfig b/src/mainboard/amd/pistachio/Kconfig deleted file mode 100644 index 2296e829ff..0000000000 --- a/src/mainboard/amd/pistachio/Kconfig +++ /dev/null @@ -1,59 +0,0 @@ -if BOARD_AMD_PISTACHIO - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default amd/pistachio - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "Pistachio" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_AMD_PISTACHIO diff --git a/src/mainboard/amd/pistachio/Kconfig.name b/src/mainboard/amd/pistachio/Kconfig.name deleted file mode 100644 index bbab2bff49..0000000000 --- a/src/mainboard/amd/pistachio/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_PISTACHIO - bool "Pistachio" diff --git a/src/mainboard/amd/pistachio/acpi/ide.asl b/src/mainboard/amd/pistachio/acpi/ide.asl deleted file mode 100644 index d5badfcb6b..0000000000 --- a/src/mainboard/amd/pistachio/acpi/ide.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/amd/pistachio/acpi/routing.asl b/src/mainboard/amd/pistachio/acpi/routing.asl deleted file mode 100644 index bcb14e7e37..0000000000 --- a/src/mainboard/amd/pistachio/acpi/routing.asl +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/amd/pistachio/acpi/sata.asl b/src/mainboard/amd/pistachio/acpi/sata.asl deleted file mode 100644 index 474e5ed6d2..0000000000 --- a/src/mainboard/amd/pistachio/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/amd/pistachio/acpi/usb.asl b/src/mainboard/amd/pistachio/acpi/usb.asl deleted file mode 100644 index a1f87b6d5b..0000000000 --- a/src/mainboard/amd/pistachio/acpi/usb.asl +++ /dev/null @@ -1,159 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -/* - * If (LLessEqual(UOM5,9)) { - * Scope (\_GPE) { - * Method (_L1A) { - * UCOC() - * if (LEqual(GPB5,PLC5)) { - * Not(PLC5,PLC5) - * Store(PLC5, \_SB.PT5D) - * } - * } - * } - * } - */ - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/amd/pistachio/acpi_tables.c b/src/mainboard/amd/pistachio/acpi_tables.c deleted file mode 100644 index 75834b6c7f..0000000000 --- a/src/mainboard/amd/pistachio/acpi_tables.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/amd/pistachio/board_info.txt b/src/mainboard/amd/pistachio/board_info.txt deleted file mode 100644 index b351b8e696..0000000000 --- a/src/mainboard/amd/pistachio/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/amd/pistachio/cmos.layout b/src/mainboard/amd/pistachio/cmos.layout deleted file mode 100644 index 104d51f4c2..0000000000 --- a/src/mainboard/amd/pistachio/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/pistachio/devicetree.cb b/src/mainboard/amd/pistachio/devicetree.cb deleted file mode 100644 index 805df7cb41..0000000000 --- a/src/mainboard/amd/pistachio/devicetree.cb +++ /dev/null @@ -1,80 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge, K8 HT Configuration - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - # device pci 0.1 off end # CLK - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 off end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 off end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x438d - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.1 on end # K8 Address Map - device pci 18.2 on end # K8 DRAM Controller and HT Trace Mode - device pci 18.3 on end # K8 Miscellaneous Control - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/amd/pistachio/dsdt.asl b/src/mainboard/amd/pistachio/dsdt.asl deleted file mode 100644 index 79589a85e2..0000000000 --- a/src/mainboard/amd/pistachio/dsdt.asl +++ /dev/null @@ -1,1695 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/sb600/sb600.h> - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event */ - Method(_L1A) { - /* DBGO("\\_GPE\\_L1A\n") */ - Notify (\_SB.SLPB, 0x80) - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.HPTM) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - - Device (SLPB) { - Name (_HID, EisaId ("PNP0C0E")) - Name (_PRW, Package (0x02) {0x0F, 0x04}) - Name (_STA, 0x0B) - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x18, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Return (Local0) - } - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 900) - Name (TCRT, 950) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x2E,, 0x25), Local0) - If (LGreater (Local0, 0x20)) { - Store (Local0, Local1) - } - Else { - Add (Local0, 0x40, Local0) - Add (Local0, TCRT, Local0) - Return (Add (550, KELV)) - } - - /* Store (SMBR (0x07, 0x2E, 0x26), Local0) - * If (LGreater (Local0, 0x20)) { - * If (LGreater (Local0, Local1)) { - * Store (Local0, Local1) - * } - * } - * Else { - * Add (Local0, 0x40, Local0) - * Add (Local0, TCRT, Local0) - * Return (Add (Local0, KELV)) - * } - */ - - Store (SMBR (0x07, 0x2E, 0x27), Local0) - If (LGreater (Local0, 0x20)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Subtract (Local1, 0x40, Local1) - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, 0x40, Local0) - Add (Local0, TCRT, Local0) - Return (Add (550 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/amd/pistachio/fadt.c b/src/mainboard/amd/pistachio/fadt.c deleted file mode 100644 index b397f52aea..0000000000 --- a/src/mainboard/amd/pistachio/fadt.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1 << 3 | 0 << 2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1 << 1 | 1 << 3| 1 << 5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/amd/pistachio/get_bus_conf.c b/src/mainboard/amd/pistachio/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/amd/pistachio/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/amd/pistachio/irq_tables.c b/src/mainboard/amd/pistachio/irq_tables.c deleted file mode 100644 index 456c568801..0000000000 --- a/src/mainboard/amd/pistachio/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern u32 sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/pistachio/mainboard.c b/src/mainboard/amd/pistachio/mainboard.c deleted file mode 100644 index 77fbcc1e17..0000000000 --- a/src/mainboard/amd/pistachio/mainboard.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7475_ADDRESS 0x2E -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7475_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address) -#define ADT7475_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address, val) - - -/******************************************************** -* pistachio uses a BCM5787 as on-board NIC. -* It has a pin named LOW_POWER to enable it into LOW POWER state. -* In order to run NIC, we should let it out of Low power state. This pin is -* controlled by GPM8. -* RRG4.2.3 GPM as GPIO -* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers: -* I/O C50, C51, C52, PM I/O94, 95, 96. -* RRG4.2.3.1 GPM pins as Input -* RRG4.2.3.2 GPM pins as Output -* The R77 (on BRASS) / R81 (on Bronze) is not load! -* So NIC can work whether this function runs. -********************************************************/ -static void enable_onboard_nic(void) -{ - u8 byte; - - printk(BIOS_INFO, "%s.\n", __func__); - - /* enable GPM8 output */ - byte = pm_ioread(0x95); - byte &= 0xfe; - pm_iowrite(0x95, byte); - - /* GPM8 outputs low. */ - byte = pm_ioread(0x94); - byte &= 0xfe; - pm_iowrite(0x94, byte); -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte, byte2; - u16 word; - u32 dword; - struct device *sm_dev; - - /* set adt7475 */ - ADT7475_write_byte(0x40, 0x04); - /* Config Register 6 */ - ADT7475_write_byte(0x10, 0x00); - /* Config Register 7 */ - ADT7475_write_byte(0x11, 0x00); - - /* set Offset 64 format, enable THERM on Remote 1& Remote 2 */ - ADT7475_write_byte(0x7c, 0xa0); - /* No offset for remote 2 */ - ADT7475_write_byte(0x72, 0x00); - /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ - ADT7475_write_byte(0x5c, 0x02); - /* PWM 3 configuration register Case fan controlled by 690 temp */ - ADT7475_write_byte(0x5e, 0x42); - - /* remote 1 low temp limit */ - ADT7475_write_byte(0x4e, 0x00); - /* remote 1 High temp limit (90C) */ - ADT7475_write_byte(0x4f, 0x9a); - - /* remote2 Low Temp Limit */ - ADT7475_write_byte(0x52, 0x00); - /* remote2 High Limit (90C) */ - ADT7475_write_byte(0x53, 0x9a); - - /* remote 1 therm temp limit (95C) */ - ADT7475_write_byte(0x6a, 0x9f); - /* remote 2 therm temp limit (95C) */ - ADT7475_write_byte(0x6c, 0x9f); - - /* PWM 1 minimum duty cycle (37%) */ - ADT7475_write_byte(0x64, 0x60); - /* PWM 1 Maximum duty cycle (100%) */ - ADT7475_write_byte(0x38, 0xff); - /* PWM 3 minimum duty cycle (37%) */ - ADT7475_write_byte(0x66, 0x60); - /* PWM 3 Maximum Duty Cycle (100%) */ - ADT7475_write_byte(0x3a, 0xff); - - /* Remote 1 temperature Tmin (32C) */ - ADT7475_write_byte(0x67, 0x60); - /* Remote 2 temperature Tmin (32C) */ - ADT7475_write_byte(0x69, 0x60); - /* remote 1 Trange (53C ramp range) */ - ADT7475_write_byte(0x5f, 0xe8); - /* remote 2 Trange (53C ramp range) */ - ADT7475_write_byte(0x61, 0xe8); - - /* PWM2 Duty cycle */ - ADT7475_write_byte(0x65, 0x00); - /* PWM2 Disabled */ - ADT7475_write_byte(0x5d, 0x80); - /* PWM2 Max Duty Cycle */ - ADT7475_write_byte(0x39, 0x00); - - /* Config Register 3 - enable smbalert & therm */ - ADT7475_write_byte(0x78, 0x03); - /* Config Register 4 - enable therm output */ - ADT7475_write_byte(0x7d, 0x09); - /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 2 fault, SmbAlert Fan for Therm Timer event */ - ADT7475_write_byte(0x75, 0x2a); - /* Config Register 1 Set Start bit */ - ADT7475_write_byte(0x40, 0x05); - /* Read status register to clear any old errors */ - byte2 = ADT7475_read_byte(0x42); - byte = ADT7475_read_byte(0x41); - - /* remote 1 temperature offset */ - ADT7475_write_byte(0x70, 0x00); - - printk(BIOS_INFO, "Init adt7475 end , status 0x42 %02x, status 0x41 %02x\n", - byte2, byte); - - /* sb600 setting for thermal config. Set SB600 GPM5 to trigger ACPI event */ - /* set GPM5 as GPM5, not DDR3_memory disable */ - byte = pm_ioread(0x8f); - byte |= 1 << 6; /* enable GPE */ - pm_iowrite(0x8f, byte); - - /* GPM5 as GPIO not USB OC */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - dword = pci_read_config32(sm_dev, 0x64); - dword |= 1 << 19; - pci_write_config32(sm_dev, 0x64, dword); - - /* Enable Client Management Index/Data registers */ - dword = pci_read_config32(sm_dev, 0x78); - dword |= 1 << 11; /* Cms_enable */ - pci_write_config32(sm_dev, 0x78, dword); - - /* MiscfuncEnable */ - byte = pci_read_config8(sm_dev, 0x41); - byte |= (1 << 5); - pci_write_config8(sm_dev, 0x41, byte); - - /* set GPM5 as input */ - /* set index register 0C50h to 13h (miscellaneous control) */ - outb(0x13, 0xC50); /* CMIndex */ - /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */ - byte = inb(0xC51); /* CMData */ - byte &= 0x3f; - byte |= 1 << 6; - outb(byte, 0xC51); - /* set GPM port 0C52h bit 5 to 1 to tri-state the GPM port */ - byte = inb(0xc52); /* GpmPort */ - byte |= 1 << 5; - outb(byte, 0xc52); - /* set CM data register 0C51h bits [7:6] to 00b to set GPM port for read */ - byte = inb(0xc51); - byte &= 0x3f; - outb(byte, 0xc51); - - /* trigger SCI/SMI */ - byte = pm_ioread(0x34); - byte &= 0xcf; - pm_iowrite(0x34, byte); - - /* set GPM5 to not wake from s5 */ - byte = pm_ioread(0x77); - byte &= ~(1 << 5); - pm_iowrite(0x77, byte); - - /* trigger on falling edge */ - byte = pm_ioread(0x38); - byte &= ~(1 << 2); - pm_iowrite(0x38, byte); - - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in pistachio board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard Pistachio Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/pistachio/mptable.c b/src/mainboard/amd/pistachio/mptable.c deleted file mode 100644 index af67c5413d..0000000000 --- a/src/mainboard/amd/pistachio/mptable.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/pistachio/resourcemap.c b/src/mainboard/amd/pistachio/resourcemap.c deleted file mode 100644 index d1e899b657..0000000000 --- a/src/mainboard/amd/pistachio/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_pistachio_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c deleted file mode 100644 index 2a4b159e6f..0000000000 --- a/src/mainboard/amd/pistachio/romstage.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <spd.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include <northbridge/amd/amdk8/f.h> - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sb600_lpc_port80(); - /* sb600_pci_port80(); */ - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - /* Pistachio used a FPGA to enable serial debug instead of a SIO - * and it doesn't require any special setup. */ - - console_init(); - - post_code(0x03); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_pistachio_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - /* it will set up chains and store link pair for optimization later, - * it will init sblnk and sbbusn, nodes, sbdn */ - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - post_code(0x04); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - post_code(0x05); - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - post_code(0x06); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x07); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_code(0x08); - - rs690_before_pci_init(); - sb600_before_pci_init(); -} diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig b/src/mainboard/amd/serengeti_cheetah/Kconfig deleted file mode 100644 index 2d2d4d172c..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -if BOARD_AMD_SERENGETI_CHEETAH - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SOUTHBRIDGE_AMD_AMD8132 - select SOUTHBRIDGE_AMD_AMD8151 - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_WINBOND_W83627HF - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select WAIT_BEFORE_CPUS_INIT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_I2CMUX - -config MAINBOARD_DIR - string - default amd/serengeti_cheetah - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config MAINBOARD_PART_NUMBER - string - default "Serengeti Cheetah" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 4 - -config MEM_TRAIN_SEQ - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x6 - -config HT_CHAIN_UNITID_BASE - hex - default 0xa - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_AMD_SERENGETI_CHEETAH diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig.name b/src/mainboard/amd/serengeti_cheetah/Kconfig.name deleted file mode 100644 index 8a15a9bdde..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AMD_SERENGETI_CHEETAH - bool "Serengeti Cheetah" diff --git a/src/mainboard/amd/serengeti_cheetah/Makefile.inc b/src/mainboard/amd/serengeti_cheetah/Makefile.inc deleted file mode 100644 index 876b3edbf4..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/Makefile.inc +++ /dev/null @@ -1,3 +0,0 @@ -$(eval $(call asl_template,ssdt2)) -$(eval $(call asl_template,ssdt3)) -$(eval $(call asl_template,ssdt4)) diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8111.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8111.asl deleted file mode 100644 index aaa778b7ee..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8111.asl +++ /dev/null @@ -1,183 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -//AMD8111 - Name (APIC, Package (0x04) - { - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} - }) - - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00}, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00}, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00}, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00} - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0) - // Update the Device Number according to SBDN - Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) - - Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { - Return (PICM) - } - Else { - Return (APIC) - } - } - - Device (SBC3) - { - /* ACPI smbus it should be 0x00040003 if 8131 present */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010003)) - } - OperationRegion (PIRQ, PCI_Config, 0x56, 0x02) - Field (PIRQ, ByteAcc, Lock, Preserve) - { - PIBA, 8, - PIDC, 8 - } -/* - OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) - Field (TS3_, DWordAcc, NoLock, Preserve) - { - PTS3, 16 - } -*/ - } - - Device (HPET) - { - Name (HPT, 0x00) - Name (_HID, EisaId ("PNP0103")) - Name (_UID, 0x00) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) - }) - Return (BUF0) - } - } - - #include "amd8111_pic.asl" - - #include "amd8111_isa.asl" - - Device (TP2P) - { - /* 8111 P2P and it should 0x00030000 when 8131 present*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x08, 0x03 }) } - Else { Return (Package (0x02) { 0x08, 0x01 }) } - } - - Device (USB0) - { - Name (_ADR, 0x00000000) - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x0F, 0x03 }) } - Else { Return (Package (0x02) { 0x0F, 0x01 }) } - } - } - - Device (USB1) - { - Name (_ADR, 0x00000001) - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x0F, 0x03 }) } - Else { Return (Package (0x02) { 0x0F, 0x01 }) } - } - } - - Name (APIC, Package (0x0C) - { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4 - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, - - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3 - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } - }) - - Name (PICM, Package (0x0C) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 4 - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 3 - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } - }) - - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8111_isa.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8111_isa.asl deleted file mode 100644 index 8ec776b477..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8111_isa.asl +++ /dev/null @@ -1,191 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/ioapic.h> -#include <cpu/x86/lapic_def.h> - -/* - * Copyright 2005 AMD - */ -//AMD8111 isa - - Device (ISA) - { - /* lpc 0x00040000 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010000)) - } - - OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers - Field (PIRY, ByteAcc, NoLock, Preserve) - { - Z000, 2, // Parallel Port Range - , 1, - ECP, 1, // ECP Enable - FDC1, 1, // Floppy Drive Controller 1 - FDC2, 1, // Floppy Drive Controller 2 - Offset (0x01), - Z001, 3, // Serial Port A Range - SAEN, 1, // Serial Post A Enabled - Z002, 3, // Serial Port B Range - SBEN, 1 // Serial Post B Enabled - } - - Device (PIC) - { - Name (_HID, EisaId ("PNP0000")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) - IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) - IRQ (Edge, ActiveHigh, Exclusive) {2} - }) - } - - Device (DMA1) - { - Name (_HID, EisaId ("PNP0200")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) - IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) - IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) - DMA (Compatibility, NotBusMaster, Transfer16) {4} - }) - } - - Device (TMR) - { - Name (_HID, EisaId ("PNP0100")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) - IRQ (Edge, ActiveHigh, Exclusive) {0} - }) - } - - Device (RTC) - { - Name (_HID, EisaId ("PNP0B00")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0070, 0x0070, 0x01, 0x06) - IRQ (Edge, ActiveHigh, Exclusive) {8} - }) - } - - Device (SPKR) - { - Name (_HID, EisaId ("PNP0800")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) - }) - } - - Device (COPR) - { - Name (_HID, EisaId ("PNP0C04")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) - IRQ (Edge, ActiveHigh, Exclusive) {13} - }) - } - - Device (SYSR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x00) - Name (SYR1, ResourceTemplate () - { - IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM - IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM - IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) - IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) - IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) - IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) - IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) - IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) - IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A) - IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) - IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) - IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) - IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - }) - Method (_CRS, 0, NotSerialized) - { - Return (SYR1) - } - } - - Device (MEM) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF - Memory32Fixed (ReadWrite, 0x000C0000, 0x00010000) // video BIOS c0000-c8404 - Memory32Fixed (ReadWrite, IO_APIC_ADDR, 0x00001000) - Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM - Memory32Fixed (ReadWrite, LOCAL_APIC_ADDR, 0x00001000) - Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS - }) - // Read the Video Memory length - CreateDWordField (BUF0, 0x14, CLEN) - CreateDWordField (BUF0, 0x10, CBAS) - - ShiftLeft (VGA1, 0x09, Local0) - Store (Local0, CLEN) - - Return (BUF0) - } - } - - Device (PS2M) - { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () - { - IRQNoFlags () {12} - }) - Method (_STA, 0, NotSerialized) - { - And (FLG0, 0x04, Local0) - If (LEqual (Local0, 0x04)) { Return (0x0F) } - Else { Return (0x00) } - } - } - - Device (PS2K) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - } - #include "superio.asl" - - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8111_pic.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8111_pic.asl deleted file mode 100644 index aa67ecb3d0..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8111_pic.asl +++ /dev/null @@ -1,366 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -//AMD8111 pic LNKA B C D - - Device (LNKA) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) - If (LNot (LEqual (Local1, 0x00))) - { // Routing enable - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) - Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) - } - } - - Device (LNKB) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRB1) - CreateByteField (Arg0, 0x02, IRB2) - ShiftLeft (IRB2, 0x08, Local0) - Or (Local0, IRB1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) - ShiftLeft (Local1, 0x04, Local1) - Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) - } - } - - Device (LNKC) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) - Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) - } - } - - Device (LNKD) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRB1) - CreateByteField (Arg0, 0x02, IRB2) - ShiftLeft (IRB2, 0x08, Local0) - Or (Local0, IRB1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) - ShiftLeft (Local1, 0x04, Local1) - Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) - } - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8131.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8131.asl deleted file mode 100644 index b9a6677a7a..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8131.asl +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x14) - { - // Slot A - PIRQ BCDA - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, - - //Cypress Slot A - PIRQ BCDA - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //? - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 }, - - //Cypress Slot B - PIRQ CDAB - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //? - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 }, - - //Cypress Slot C - PIRQ DABC - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //? - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A }, - - //Cypress Slot D - PIRQ ABCD - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //? - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B } - }) - Name (PICM, Package (0x14) - { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 2 - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ ABCD - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8131_2.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8131_2.asl deleted file mode 100644 index b0dbb450bc..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8131_2.asl +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ BCDA - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x0018 }, //Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0019 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x001A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x001B }, - - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ ABCD - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x001F },// Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0020 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x0021 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x0022 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8132_2.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8132_2.asl deleted file mode 100644 index 02b9ee21a3..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8132_2.asl +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ BCDA - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x0018 }, //Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0019 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x001A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x001B }, - - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ ABCD - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x001F },// Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0020 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x0021 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x0022 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/amd8151.asl b/src/mainboard/amd/serengeti_cheetah/acpi/amd8151.asl deleted file mode 100644 index 53fd725a31..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/amd8151.asl +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// AMD8151 - Device (AGPB) - { - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Name (APIC, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/pci0_hc.asl b/src/mainboard/amd/serengeti_cheetah/acpi/pci0_hc.asl deleted file mode 100644 index 2b21a25f5b..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/pci0_hc.asl +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - #include "amd8111.asl" //real SB at first - #include "amd8131.asl" diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/pci2_hc.asl b/src/mainboard/amd/serengeti_cheetah/acpi/pci2_hc.asl deleted file mode 100644 index 5fc8c99b6d..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/pci2_hc.asl +++ /dev/null @@ -1,14 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - #include "amd8132_2.asl" diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/pci3_hc.asl b/src/mainboard/amd/serengeti_cheetah/acpi/pci3_hc.asl deleted file mode 100644 index 0d9cd7ed59..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/pci3_hc.asl +++ /dev/null @@ -1,14 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - #include "amd8151.asl" diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/pci4_hc.asl b/src/mainboard/amd/serengeti_cheetah/acpi/pci4_hc.asl deleted file mode 100644 index 3f04ac8704..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/pci4_hc.asl +++ /dev/null @@ -1,14 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - #include "amd8131_2.asl" diff --git a/src/mainboard/amd/serengeti_cheetah/acpi/superio.asl b/src/mainboard/amd/serengeti_cheetah/acpi/superio.asl deleted file mode 100644 index 8ce8bc00fe..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi/superio.asl +++ /dev/null @@ -1,14 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// #include "w83627hf.asl" diff --git a/src/mainboard/amd/serengeti_cheetah/acpi_tables.c b/src/mainboard/amd/serengeti_cheetah/acpi_tables.c deleted file mode 100644 index 97a612e866..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/acpi_tables.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * Island Aruma ACPI support - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <cbfs.h> -#include "northbridge/amd/amdk8/acpi.h" -#include "mb_sysconf.h" -#include "mainboard.h" - -unsigned long acpi_fill_madt(unsigned long current) -{ - u32 gsi_base = 0x18; - - struct mb_sysconf_t *m; - - m = sysconf.mb; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write 8111 IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, - IO_APIC_ADDR, 0); - - /* Write all 8131 IOAPICs */ - { - struct device *dev; - struct resource *res; - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1, - res->base, gsi_base); - gsi_base+=7; - - } - } - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2, - res->base, gsi_base); - gsi_base+=7; - } - } - - int i; - int j = 0; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - u32 d = 0; - if (!(sysconf.pci1234[i] & 0x1)) - continue; - /* 8131 need to use +4 */ - switch (sysconf.hcid[i]) { - case 1: - d = 7; - break; - case 3: - d = 4; - break; - } - switch (sysconf.hcid[i]) { - case 1: - case 3: - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0], - res->base, gsi_base); - gsi_base+=d; - } - } - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1], - res->base, gsi_base); - gsi_base+=d; - - } - } - break; - } - j++; - } - } - - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 0, 2, 5); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high*/ - - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long mainboard_write_acpi_tables(struct device *dev, unsigned long start, acpi_rsdp_t *rsdp) -{ - unsigned long current; - acpi_header_t *ssdtx; - const void *p; - size_t p_size; - - int i; - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ - - for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ - const char *file_name; - if ((sysconf.pci1234[i] & 1) != 1) - continue; - u8 c; - if (i < 7) - c = (u8) ('4' + i - 1); - else - c = (u8) ('A' + i - 1 - 6); - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ - ssdtx = (acpi_header_t *)current; - switch(sysconf.hcid[i]) { - case 1: /* 8132 */ - file_name = CONFIG_CBFS_PREFIX "/ssdt2.aml"; - break; - case 2: /* 8151 */ - file_name = CONFIG_CBFS_PREFIX "/ssdt3.aml"; - break; - case 3: /* 8131 */ - file_name = CONFIG_CBFS_PREFIX "/ssdt4.aml"; - break; - default: - continue; - } - p = cbfs_boot_map_with_leak( - file_name, - CBFS_TYPE_RAW, &p_size); - if (!p || p_size < sizeof(acpi_header_t)) - continue; - - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } - - return current; -} diff --git a/src/mainboard/amd/serengeti_cheetah/board_info.txt b/src/mainboard/amd/serengeti_cheetah/board_info.txt deleted file mode 100644 index 3d902b640a..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: server diff --git a/src/mainboard/amd/serengeti_cheetah/cmos.layout b/src/mainboard/amd/serengeti_cheetah/cmos.layout deleted file mode 100644 index 56ed652b97..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/serengeti_cheetah/devicetree.cb b/src/mainboard/amd/serengeti_cheetah/devicetree.cb deleted file mode 100644 index 8ff0e3effe..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/devicetree.cb +++ /dev/null @@ -1,147 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 - chip southbridge/amd/amd8132 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/i2c/i2cmux # pca9556 smbus mux - device i2c 18 on #0 pca9516 1 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end - device i2c 18 on #1 pca9516 2 - chip drivers/generic/generic #dimm 1-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-2-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-2-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-3-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-3-1 - device i2c 57 on end - end - end - end - end # acpi - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 - device pci 19.0 on # northbridge - chip southbridge/amd/amd8151 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 1.0 on end - end - end # device pci 19.0 - - device pci 19.0 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - - - end #domain -end diff --git a/src/mainboard/amd/serengeti_cheetah/dsdt.asl b/src/mainboard/amd/serengeti_cheetah/dsdt.asl deleted file mode 100644 index 7e119af5dd..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/dsdt.asl +++ /dev/null @@ -1,219 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_PR) - { - Processor (CPU0, 0x00, 0x0000C010, 0x06) {} - Processor (CPU1, 0x01, 0x00000000, 0x00) {} - Processor (CPU2, 0x02, 0x00000000, 0x00) {} - Processor (CPU3, 0x03, 0x00000000, 0x00) {} - - } - - Method (FWSO, 0, NotSerialized) { } - - - Scope (_SB) - { - Device (PCI0) - { - /* BUS0 root bus */ - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - External (CBST) - - - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180000) - Name (_UID, 0x01) - - Name (HCIN, 0x00) // HC1 - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh - IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h - IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x8100, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x7F00,,, - , TypeStatic) //8100h-FFFFh - - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000C0000, // Address Range Minimum - 0x000CFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00010000,,, - , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh - - Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x03AF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x03B0,,, - , TypeStatic) //0-CF7h - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x03E0, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0918,,, - , TypeStatic) //0-CF7h - }) - \_SB.OSVR () - CreateDWordField (BUF0, 0x3E, VLEN) - CreateDWordField (BUF0, 0x36, VMAX) - CreateDWordField (BUF0, 0x32, VMIN) - ShiftLeft (VGA1, 0x09, Local0) - Add (VMIN, Local0, VMAX) - Decrement (VMAX) - Store (Local0, VLEN) - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci0_hc.asl" - - } - Device (PCI1) - { - Name (_HID, "PNP0A03") - Name (_ADR, 0x00000000) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - Return (\_SB.PCI0.CBST) - } - Name (_BBN, 0x00) - } - - - } - - Scope (_GPE) - { - Method (_L08, 0, NotSerialized) - { - Notify (\_SB.PCI0, 0x02) //PME# Wakeup - } - - Method (_L0F, 0, NotSerialized) - { - Notify (\_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup - } - - Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B - { - Notify (\_SB.PCI0.PG0B, 0x02) - } - - Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A - { - Notify (\_SB.PCI0.PG0A, 0x02) - } - } - - Method (_PTS, 1, NotSerialized) - { - Or (Arg0, 0xF0, Local0) - Store (Local0, DBG1) - } -/* - Method (_WAK, 1, NotSerialized) - { - Or (Arg0, 0xE0, Local0) - Store (Local0, DBG1) - } -*/ - Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode - Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method - { - Store (Arg0, PICF) - } - - OperationRegion (DEBG, SystemIO, 0x80, 0x01) - Field (DEBG, ByteAcc, Lock, Preserve) - { - DBG1, 8 - } - - OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) - Field (EXTM, WordAcc, Lock, Preserve) - { - AMEM, 32 - } - - OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) - Field (VGAM, ByteAcc, Lock, Preserve) - { - VGA1, 8 - } - - OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) - Field (GRAM, ByteAcc, Lock, Preserve) - { - Offset (0x10), - FLG0, 8 - } - - OperationRegion (GSTS, SystemIO, 0xC028, 0x02) - Field (GSTS, ByteAcc, NoLock, Preserve) - { - , 4, - IRQR, 1 - } - - OperationRegion (Z007, SystemIO, 0x21, 0x01) - Field (Z007, ByteAcc, NoLock, Preserve) - { - Z008, 8 - } - - OperationRegion (Z009, SystemIO, 0xA1, 0x01) - Field (Z009, ByteAcc, NoLock, Preserve) - { - Z00A, 8 - } - - #include "northbridge/amd/amdk8/util.asl" - -} diff --git a/src/mainboard/amd/serengeti_cheetah/fadt.c b/src/mainboard/amd/serengeti_cheetah/fadt.c deleted file mode 100644 index 6cf5197149..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/fadt.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * (C) Copyright 2005 Stefan Reinauer <stepan@openbios.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> - -extern unsigned pm_base; /* pm_base should be set in sb ACPI */ - -void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ - - acpi_header_t *header=&(fadt->header); - - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt,0,sizeof(acpi_fadt_t)); - memcpy(header->signature,"FACP",4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id,OEM_ID,6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id,ASLC,4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl=(u32)facs; - fadt->dsdt= (u32)dsdt; - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0;/* pm_base+0x2f */ - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - fadt->pm1a_evt_blk = pm_base; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = pm_base+0x04; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = 0x0000; - fadt->pm_tmr_blk = pm_base+0x08; - fadt->gpe0_blk = pm_base+0x20; - fadt->gpe1_blk = pm_base+0xb0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 8; - fadt->gpe1_base = 16; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x25; - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pm_base; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pm_base+4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pm_base+0x08; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pm_base+0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 64; - fadt->x_gpe1_blk.bit_offset = 16; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = pm_base+0xb0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c deleted file mode 100644 index dd0b43a1fc..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -/* Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables */ -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = { /*Here you only need to set value in pci1234 for HT-IO that could be installed or not */ - /* You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail */ - 0x0000ff0, - 0x0000ff0, -}; - -static unsigned hcdnx[] = { /* HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most */ - 0x20202020, - 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -static unsigned get_hcid(unsigned i) -{ - unsigned id = 0; - - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - - unsigned devn = sysconf.hcdn[i] & 0xff; - - struct device *dev; - - dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); - - switch (dev->device) { - case 0x7458: /*8132 */ - id = 1; - break; - case 0x7454: /*8151 */ - id = 2; - break; - case 0x7450: /*8131 */ - id = 3; - break; - } - - /* we may need more way to find out hcid: subsystem id? GPIO read ? */ - - /* we need use id for 1. bus num, 2. mptable, 3. ACPI table */ - - return id; -} - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i, j; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn3 = sysconf.hcdn[0] & 0xff; - - m->bus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_8111_0 = m->bus_8132_0; - - /* 8111 */ - dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8111_0, sysconf.sbdn); - } - - /* 8132-1 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 0)); - if (dev) { - m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132_0, m->sbdn3); - } - - /* 8132-2 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3 + 1, 0)); - if (dev) { - m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132_0, m->sbdn3 + 1); - } - - /* HT chain 1 */ - j = 0; - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - - /* check hcid type here */ - sysconf.hcid[i] = get_hcid(i); - - switch (sysconf.hcid[i]) { - - case 1: /* 8132 */ - case 3: /* 8131 */ - - m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - - m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; - - /* 8132-1 */ - dev = - dev_find_slot(m->bus_8132a[j][0], - PCI_DEVFN(m->sbdn3a[j], 0)); - if (dev) { - m->bus_8132a[j][1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132a[j][0], m->sbdn3a[j]); - } - - /* 8132-2 */ - dev = - dev_find_slot(m->bus_8132a[j][0], - PCI_DEVFN(m->sbdn3a[j] + 1, 0)); - if (dev) { - m->bus_8132a[j][2] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132a[j][0], m->sbdn3a[j] + 1); - } - - break; - - case 2: /* 8151 */ - - m->bus_8151[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - m->sbdn5[j] = sysconf.hcdn[i] & 0xff; - /* 8151 */ - dev = - dev_find_slot(m->bus_8151[j][0], - PCI_DEVFN(m->sbdn5[j] + 1, 0)); - - if (dev) { - m->bus_8151[j][1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8151[j][0], m->sbdn5[j] + 1); - } - - break; - } - - j++; - } - -/* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_8111 = apicid_base + 0; - m->apicid_8132_1 = apicid_base + 1; - m->apicid_8132_2 = apicid_base + 2; - for (i = 0; i < j; i++) { - m->apicid_8132a[i][0] = apicid_base + 3 + i * 2; - m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1; - } -} diff --git a/src/mainboard/amd/serengeti_cheetah/irq_tables.c b/src/mainboard/amd/serengeti_cheetah/irq_tables.c deleted file mode 100644 index 331ce76c5a..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/irq_tables.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - struct mb_sysconf_t *m; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_8111_0; - pirq->rtr_devfn = ((sysconf.sbdn + 1) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - { - struct device *dev; - dev = - dev_find_slot(m->bus_8111_0, - PCI_DEVFN(sysconf.sbdn + 1, 3)); - if (dev) { - /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D - - PINTA = IRQ3 - PINTB = IRQ5 - PINTC = IRQ10 - PINTD = IRQ11 - */ - pci_write_config16(dev, 0x56, 0xba53); - } - } - -/* pci bridge */ - printk(BIOS_DEBUG, "setting Onboard AMD Southbridge\n"); - static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 }; - pci_assign_irqs(m->bus_8111_0, sysconf.sbdn + 1, slotIrqs_1_4); - write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn + 1) << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - printk(BIOS_DEBUG, "setting Onboard AMD USB\n"); - static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11 }; - pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0); - write_pirq_info(pirq_info, m->bus_8111_1, 0, 0, 0, 0, 0, 0, 0, 0x4, - 0xdef8, 0, 0); - pirq_info++; - slot_num++; - -/* pcix bridge */ - - int j = 0; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - j++; - - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/serengeti_cheetah/mainboard.c b/src/mainboard/amd/serengeti_cheetah/mainboard.c deleted file mode 100644 index 3c3234c3d3..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/mainboard.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/acpi.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include "mainboard.h" - -static void mainboard_enable(struct device *dev) -{ - dev->ops->write_acpi_tables = mainboard_write_acpi_tables; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/serengeti_cheetah/mainboard.h b/src/mainboard/amd/serengeti_cheetah/mainboard.h deleted file mode 100644 index 2613374e3c..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/mainboard.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned long mainboard_write_acpi_tables(struct device *device, unsigned long start, acpi_rsdp_t *rsdp); diff --git a/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h b/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h deleted file mode 100644 index 2aeede0793..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_8132_0; - unsigned char bus_8132_1; - unsigned char bus_8132_2; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - - unsigned char bus_8132a[7][3]; - - unsigned char bus_8151[7][2]; - - unsigned apicid_8111; - unsigned apicid_8132_1; - unsigned apicid_8132_2; - unsigned apicid_8132a[7][2]; - - unsigned sbdn3; - unsigned sbdn3a[7]; - unsigned sbdn5[7]; - -}; - -#endif diff --git a/src/mainboard/amd/serengeti_cheetah/mptable.c b/src/mainboard/amd/serengeti_cheetah/mptable.c deleted file mode 100644 index 020e9515ee..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/mptable.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int i, j, bus_isa; - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/* I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, m->apicid_8111, 0x11, VIO_APIC_VADDR); /* 8111 */ - { - struct device *dev; - struct resource *res; - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) - smp_write_ioapic(mc, m->apicid_8132_1, 0x11, - res2mmio(res, 0, 0)); - } - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) - smp_write_ioapic(mc, m->apicid_8132_2, 0x11, - res2mmio(res, 0, 0)); - } - - j = 0; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - - switch(sysconf.hcid[i]) { - case 1: /* 8132 */ - case 3: /* 8131 */ - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) - smp_write_ioapic(mc, m->apicid_8132a[j][0], 0x11, - res2mmio(res, 0, 0)); - } - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) - smp_write_ioapic(mc, m->apicid_8132a[j][1], 0x11, - res2mmio(res, 0, 0)); - } - break; - } - j++; - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_8111, 0); - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -/* ??? What */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ((sysconf.sbdn+1)<<2)|3, m->apicid_8111, 0x13); - -/* Onboard AMD USB */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (0 << 2)|3, m->apicid_8111, 0x13); - -/*Slot 3 PCI 32 */ - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (5 << 2)|i, m->apicid_8111, 0x10 + (1+i)%4); /* 16 */ - - -/* Slot 4 PCI 32 */ - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (4 << 2)|i, m->apicid_8111, 0x10 + (0+i)%4); /* 16 */ - - -/* Slot 1 PCI-X 133/100/66 */ - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, (1 << 2)|i, m->apicid_8132_2, (0+i)%4); - - -/* Slot 2 PCI-X 133/100/66 */ - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (1 << 2)|i, m->apicid_8132_1, (1+i)%4); /* 25 */ - - j = 0; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - int ii; - struct device *dev; - struct resource *res; - switch(sysconf.hcid[i]) { - case 1: - case 3: - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - /* Slot 1 PCI-X 133/100/66 */ - for (ii = 0; ii < 4; ii++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][1], (0 << 2)|ii, m->apicid_8132a[j][0], (0+ii)%4); - } - } - - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - /* Slot 2 PCI-X 133/100/66 */ - for (ii = 0; ii < 4; ii++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][2], (0 << 2)|ii, m->apicid_8132a[j][1], (0+ii)%4); /* 25 */ - } - } - - break; - case 2: - - /* Slot AGP */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8151[j][1], 0x0, m->apicid_8111, 0x11); - break; - } - - j++; - } - - - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt b/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt deleted file mode 100644 index 0dbf303935..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt +++ /dev/null @@ -1,29 +0,0 @@ -At this time, For ACPI support We got -1. support AMK K8 SRAT --- dynamically (coreboot run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) -2. support MADT ---- dynamically (coreboot run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c) -3. support DSDT ---- dynamically (Compile time, coreboot run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{acpi/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c) -4. Chipset support: amd8111, amd8132 - -The developers need to change for different MB - -Change dsdt.asl, according to MB layout - pci1, pci2, pci3, pci4, ...., pci8 - if there is HT-IO board, may use pci2.asl.... to create ssdt2.c, and ssdt3,c and ssdt4.c, ....ssdt8.c - -Change acpi_tables.c - sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is coreboot run-time configurable now. - if there is HT-IO board, need to preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed - -Regarding pci bridge apic and pic - need to modify entries amd8111.asl and amd8131.asl and amd8151.asl.... acording to your MB laybout, it is like that in mptable.c - -About other chipsets, need to develop their special asl such as - ck804.asl --- NB ck804 - bcm5785.asl or bcm5780.asl ---- Serverworks HT1000/HT2000 - -use a to create hex file -use c to delele hex file - -yhlu - -09/18/2005 diff --git a/src/mainboard/amd/serengeti_cheetah/resourcemap.c b/src/mainboard/amd/serengeti_cheetah/resourcemap.c deleted file mode 100644 index 92eaa9c481..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/resourcemap.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, /* AMD 8111 on link0 of CPU 0 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, /* AMD 8151 on link0 of CPU 1 */ - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/amd/serengeti_cheetah/romstage.c b/src/mainboard/amd/serengeti_cheetah/romstage.c deleted file mode 100644 index 5a8b6378f0..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/romstage.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/amd/amd8111/early_smbus.c" -#include <reset.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <delay.h> - -#include <cpu/amd/mtrr.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -unsigned get_sbdn(unsigned bus); - -static void memreset_setup(void) -{ - /* GPIO on amd8111 to enable MEMRST ???? */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 16); /* REVC_MEMRST_EN = 1 */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 17); -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x18 - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS = 1 and ABRT_STS = 1, so try another time */ - i = 2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret != 0) && (i-->0)); - - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/amd/amd8111/early_ctrl.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" - -#define RC0 ((1 << 0)<<8) -#define RC1 ((1 << 1)<<8) -#define RC2 ((1 << 2)<<8) -#define RC3 ((1 << 3)<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - /* first node */ - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - /* second node */ - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, -#endif -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - /* third node */ - RC2|DIMM0, RC2|DIMM2, 0, 0, - RC2|DIMM1, RC2|DIMM3, 0, 0, - /* four node */ - RC3|DIMM0, RC3|DIMM2, RC3|DIMM4, RC3|DIMM6, - RC3|DIMM1, RC3|DIMM3, RC3|DIMM5, RC3|DIMM7, -#endif - - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset; - unsigned bsp_apicid = 0; -#if IS_ENABLED(CONFIG_SET_FIDVID) - struct cpuid_result cpuid1; -#endif - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_mb_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); /* in BSP so could hold all ap until sysinfo is in ram */ - setup_coherent_ht_domain(); /* routing table and start other core0 */ - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); /* it will init sblnk and sbbusn, nodes, sbdn */ - -#if IS_ENABLED(CONFIG_SET_FIDVID) - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - - { - /* Read FIDVID_STATUS */ - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } -#endif - -#if 1 - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - /* fidvid change will issue one LDTSTOP and the HT change will be effective too */ - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } -#endif - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl in sysinfo now; */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - memreset_setup(); - - /* do we need apci timer, tsc...., only debug need it for better output */ - /* all ap stopped? */ - /* Need to use TMICT to synchronize FID/VID */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/amd/serengeti_cheetah/ssdt2.asl b/src/mainboard/amd/serengeti_cheetah/ssdt2.asl deleted file mode 100644 index c18c75f3f7..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/ssdt2.asl +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci2_hc.asl" - } - } - -} diff --git a/src/mainboard/amd/serengeti_cheetah/ssdt3.asl b/src/mainboard/amd/serengeti_cheetah/ssdt3.asl deleted file mode 100644 index c17fba0cb4..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/ssdt3.asl +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -DefinitionBlock ("SSDT3.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci3_hc.asl" - } - } - -} diff --git a/src/mainboard/amd/serengeti_cheetah/ssdt4.asl b/src/mainboard/amd/serengeti_cheetah/ssdt4.asl deleted file mode 100644 index 68b2b665f9..0000000000 --- a/src/mainboard/amd/serengeti_cheetah/ssdt4.asl +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2005 AMD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -DefinitionBlock ("SSDT4.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci4_hc.asl" - } - } - -} diff --git a/src/mainboard/asrock/939a785gmh/Kconfig b/src/mainboard/asrock/939a785gmh/Kconfig deleted file mode 100644 index 2148385def..0000000000 --- a/src/mainboard/asrock/939a785gmh/Kconfig +++ /dev/null @@ -1,64 +0,0 @@ -if BOARD_ASROCK_939A785GMH - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_939 - select K8_HT_FREQ_1G_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_WINBOND_W83627DHG - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select LIFT_BSP_APIC_ID - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_1024 - select GFXUMA - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default asrock/939a785gmh - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "939A785GMH" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_ASROCK_939A785GMH diff --git a/src/mainboard/asrock/939a785gmh/Kconfig.name b/src/mainboard/asrock/939a785gmh/Kconfig.name deleted file mode 100644 index 270239120f..0000000000 --- a/src/mainboard/asrock/939a785gmh/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASROCK_939A785GMH - bool "939A785GMH/128M" diff --git a/src/mainboard/asrock/939a785gmh/acpi/ide.asl b/src/mainboard/asrock/939a785gmh/acpi/ide.asl deleted file mode 100644 index e69de29bb2..0000000000 --- a/src/mainboard/asrock/939a785gmh/acpi/ide.asl +++ /dev/null diff --git a/src/mainboard/asrock/939a785gmh/acpi/routing.asl b/src/mainboard/asrock/939a785gmh/acpi/routing.asl deleted file mode 100644 index 65afe39b7a..0000000000 --- a/src/mainboard/asrock/939a785gmh/acpi/routing.asl +++ /dev/null @@ -1,188 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0012FFFF, 2, INTC, 0 }, - Package(){0x0012FFFF, 3, INTD, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTD, 0 }, - Package(){0x0013FFFF, 2, INTA, 0 }, - Package(){0x0013FFFF, 3, INTB, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - Package(){0x0002FFFF, 1, 0, 19 }, - Package(){0x0002FFFF, 2, 0, 16 }, - Package(){0x0002FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 9 - PCIe x1 slot */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 18 }, - Package(){0x0009FFFF, 2, 0, 19 }, - Package(){0x0009FFFF, 3, 0, 10 }, - - /* Bus 0, Dev A - PCIe internal ethernet */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 19 }, - Package(){0x000AFFFF, 2, 0, 16 }, - Package(){0x000AFFFF, 3, 0, 17 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0012FFFF, 2, 0, 18 }, - Package(){0x0012FFFF, 3, 0, 19 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0013FFFF, 2, 0, 16 }, - Package(){0x0013FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTC, 0 }, - Package(){0x0005FFFF, 1, INTD, 0 }, - Package(){0x0005FFFF, 2, INTA, 0 }, - Package(){0x0005FFFF, 3, INTB, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - Package(){0x0005FFFF, 2, 0, 16 }, - Package(){0x0005FFFF, 3, 0, 11 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe x1 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe x1 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to ethernet */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - }) -} diff --git a/src/mainboard/asrock/939a785gmh/acpi/sata.asl b/src/mainboard/asrock/939a785gmh/acpi/sata.asl deleted file mode 100644 index e69de29bb2..0000000000 --- a/src/mainboard/asrock/939a785gmh/acpi/sata.asl +++ /dev/null diff --git a/src/mainboard/asrock/939a785gmh/acpi/usb.asl b/src/mainboard/asrock/939a785gmh/acpi/usb.asl deleted file mode 100644 index e69de29bb2..0000000000 --- a/src/mainboard/asrock/939a785gmh/acpi/usb.asl +++ /dev/null diff --git a/src/mainboard/asrock/939a785gmh/acpi_tables.c b/src/mainboard/asrock/939a785gmh/acpi_tables.c deleted file mode 100644 index 6026a68ef9..0000000000 --- a/src/mainboard/asrock/939a785gmh/acpi_tables.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> -#include <southbridge/amd/sb700/sb700.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/asrock/939a785gmh/board_info.txt b/src/mainboard/asrock/939a785gmh/board_info.txt deleted file mode 100644 index 0335c9bec1..0000000000 --- a/src/mainboard/asrock/939a785gmh/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: 939A785GMH/128M -Category: desktop -Board URL: http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M&s=939 -ROM package: DIP8 -ROM protocol: SPI -Release year: 2009 diff --git a/src/mainboard/asrock/939a785gmh/cmos.layout b/src/mainboard/asrock/939a785gmh/cmos.layout deleted file mode 100644 index e22e68a15a..0000000000 --- a/src/mainboard/asrock/939a785gmh/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asrock/939a785gmh/devicetree.cb b/src/mainboard/asrock/939a785gmh/devicetree.cb deleted file mode 100644 index 8b40b9f6d4..0000000000 --- a/src/mainboard/asrock/939a785gmh/devicetree.cb +++ /dev/null @@ -1,131 +0,0 @@ -#Define gppsb_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define gpp_configuration -> device 9 1x and device a 1x is 3 and device 9 2x is 2 -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot (means if GFX slot are two 2 8x slots) -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_939 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge 16x slot - device pci 3.0 off end # used in dual slot config - device pci 4.0 off end # GPPSB - device pci 5.0 off end # GPPSB - device pci 6.0 off end # GPPSB - device pci 7.0 off end # GPPSB - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # GPP for x1 slot - device pci a.0 on end # GPP for internal network adapter - register "gppsb_configuration" = "4" # Configuration ? - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x60c" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - #device pnp 2e.6 off # SPI - #end - device pnp 2e.307 off # GPIO6 - end - device pnp 2e.8 on # WDTO#, PLED - end - device pnp 2e.009 on # GPIO2 - end - device pnp 2e.109 on # GPIO3 - end - device pnp 2e.209 on # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # HWM - io 0x60 = 0x290 - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w8362 - - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/asrock/939a785gmh/dsdt.asl b/src/mainboard/asrock/939a785gmh/dsdt.asl deleted file mode 100644 index 9c50f96386..0000000000 --- a/src/mainboard/asrock/939a785gmh/dsdt.asl +++ /dev/null @@ -1,634 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASROCK", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - #include "northbridge/amd/amdk8/util.asl" - - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - - Name(WKST,Package(){Zero, Zero}) - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* GPP x1 */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - /* ethernet */ - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBX) - Store(HPBA, HPBX) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - } /* End Device(PCI0) */ - - } /* End \_SB scope */ -} -/* End of ASL file */ diff --git a/src/mainboard/asrock/939a785gmh/get_bus_conf.c b/src/mainboard/asrock/939a785gmh/get_bus_conf.c deleted file mode 100644 index 64b3ed7032..0000000000 --- a/src/mainboard/asrock/939a785gmh/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/asrock/939a785gmh/irq_tables.c b/src/mainboard/asrock/939a785gmh/irq_tables.c deleted file mode 100644 index ef2a3ec45c..0000000000 --- a/src/mainboard/asrock/939a785gmh/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/asrock/939a785gmh/mainboard.c b/src/mainboard/asrock/939a785gmh/mainboard.c deleted file mode 100644 index 85d9060c5e..0000000000 --- a/src/mainboard/asrock/939a785gmh/mainboard.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); - -static void pcie_rst_toggle(u8 val) { - u8 byte; - - byte = pm_ioread(0x8d); - byte &= ~(3 << 1); - pm_iowrite(0x8d, byte); - - byte = pm_ioread(0x94); - /* Output enable */ - byte &= ~(3 << 2); - /* Toggle GPM8, GPM9 */ - byte &= ~(3 << 0); - byte |= val; - pm_iowrite(0x94, byte); -} - -void set_pcie_dereset() -{ - pcie_rst_toggle(0x3); -} - -void set_pcie_reset() -{ - pcie_rst_toggle(0x0); -} - -#if 0 /* not tested yet */ -/******************************************************** -* mahogany uses SB700 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - /*u32 sm_dev, ide_dev; */ - struct device *sm_dev, ide_dev; - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} -#endif /* get_ide_dma66 */ - -u8 is_dev3_present(void) -{ - return 0; -} - -/************************************************* -* enable the dedicated function in mahogany board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard 939A785GMH/128M Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; - -/* override the default SATA PHY setup */ -void sb7xx_51xx_setup_sata_phys(struct device *dev) { - /* RPR7.6.1 Program the PHY Global Control to 0x2C00 */ - pci_write_config16(dev, 0x86, 0x2c00); - - /* RPR7.6.2 SATA GENI PHY ports setting */ - pci_write_config32(dev, 0x88, 0x01B48016); - pci_write_config32(dev, 0x8c, 0x01B48016); - pci_write_config32(dev, 0x90, 0x01B48016); - pci_write_config32(dev, 0x94, 0x01B48016); - pci_write_config32(dev, 0x98, 0x01B48016); - pci_write_config32(dev, 0x9C, 0x01B48016); - - /* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */ - pci_write_config16(dev, 0xA0, 0xA07A); - pci_write_config16(dev, 0xA2, 0xA07A); - pci_write_config16(dev, 0xA4, 0xA07A); - pci_write_config16(dev, 0xA6, 0xA07A); - pci_write_config16(dev, 0xA8, 0xA07A); - pci_write_config16(dev, 0xAA, 0xA0FF); -} diff --git a/src/mainboard/asrock/939a785gmh/mptable.c b/src/mainboard/asrock/939a785gmh/mptable.c deleted file mode 100644 index fe104d031f..0000000000 --- a/src/mainboard/asrock/939a785gmh/mptable.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asrock/939a785gmh/resourcemap.c b/src/mainboard/asrock/939a785gmh/resourcemap.c deleted file mode 100644 index 0f1d4cb6e6..0000000000 --- a/src/mainboard/asrock/939a785gmh/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_939a785gmh_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asrock/939a785gmh/romstage.c b/src/mainboard/asrock/939a785gmh/romstage.c deleted file mode 100644 index d6a85ccee8..0000000000 --- a/src/mainboard/asrock/939a785gmh/romstage.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <spd.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <southbridge/amd/sb700/sb700.h> -#include <southbridge/amd/sb700/smbus.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) -#define GPIO2345_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include <southbridge/amd/rs780/rs780.h> -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_ext_func_mode(GPIO2345_DEV); - pnp_set_logical_device(GPIO2345_DEV); - - /* Pin 119 ~ 120 is GP21, GP20 */ - reg = pnp_read_config(GPIO2345_DEV, 0x29); - pnp_write_config(GPIO2345_DEV, 0x29, (reg | 2)); - - /* Turn on the Power LED ("Suspend LED" in Super I/O) */ - reg = pnp_read_config(GPIO2345_DEV, 0xf3); - pnp_write_config(GPIO2345_DEV, 0xf3, (reg | 0x40)); - - /* todo document this */ - pnp_write_config(GPIO2345_DEV, 0x2c, 0x1); - pnp_write_config(GPIO2345_DEV, 0x2d, 0x1); - - /* GPO20 - sideport voltage 1 = 1.82 0 = 1.92 - GPI21 - unknown input (NC?) - GPI22 - unknown input (NC?) - GPO23 - mgpuV bit0 - GP24-27 - PS/2 mouse/keyb (only keyb is connected use flip interface for mouse) - */ - pnp_write_config(GPIO2345_DEV, 0x30, 0x07); /* Enable GPIO 2,3,4. */ - pnp_write_config(GPIO2345_DEV, 0xe3, 0xf6); /* dir of GPIO2 11110110*/ - pnp_write_config(GPIO2345_DEV, 0xe4, 0x0e); /* data */ - pnp_write_config(GPIO2345_DEV, 0xe5, 0x00); /* No inversion */ - - /* GPIO30 - unknown output, set to 0 - GPI31 - unknown input NC? - GPI32 - unknown input NC? - GPIO33 - unknown output, set to 0. - GPI34 - unknown input NC? - GPO35 - loadline control 1 = enabled (2 phase clock) 0 = disabled 4 phase clock - GPIO36 - input = HT voltage 1.30V output (low) = HT voltage 1.35V - GP37 - unknown input NC? */ - - pnp_write_config(GPIO2345_DEV, 0xf0, 0xd6); /* dir of GPIO3 11010110*/ - pnp_write_config(GPIO2345_DEV, 0xf1, 0x96); /* data */ - pnp_write_config(GPIO2345_DEV, 0xf2, 0x00); /* No inversion */ - - /* GPO40 - mgpuV bit2 - GPO41 - mgpuV bit1 - GPO42 - IRTX - GPO43 - IRRX - GPIO44 - memory voltage bit2 (input/outputlow) - GPIO45 - memory voltage bit1 (2.60 (000) - 2.95 (111)) - GPIO46 - memory voltage bit0 - GPIO47 - unknown input? */ - - pnp_write_config(GPIO2345_DEV, 0xf4, 0xd0); /* dir of GPIO4 11010000 */ - pnp_write_config(GPIO2345_DEV, 0xf5, 0x83); /* data */ - pnp_write_config(GPIO2345_DEV, 0xf6, 0x00); /* No inversion */ - - pnp_write_config(GPIO2345_DEV, 0xf7, 0x00); /* MFC */ - pnp_write_config(GPIO2345_DEV, 0xf8, 0x00); /* MFC */ - pnp_write_config(GPIO2345_DEV, 0xfe, 0x07); /* trig type */ - pnp_exit_ext_func_mode(GPIO2345_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb7xx_51xx_lpc_port80(); */ - sb7xx_51xx_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_939a785gmh_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs780_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - sb7xx_51xx_before_pci_init(); -} diff --git a/src/mainboard/asus/a8n_e/Kconfig b/src/mainboard/asus/a8n_e/Kconfig deleted file mode 100644 index 1852ae45e0..0000000000 --- a/src/mainboard/asus/a8n_e/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_ASUS_A8N_E || BOARD_ASUS_A8N_SLI - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_939 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select CK804_USE_NIC - select CK804_USE_ACI - select QRANK_DIMM_SUPPORT - select HAVE_ACPI_TABLES - -config MAINBOARD_DIR - string - default asus/a8n_e - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -config APIC_ID_OFFSET - hex - default 0x0 - -if BOARD_ASUS_A8N_E -config MAINBOARD_PART_NUMBER - string - default "A8N-E" -endif - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 13 - -endif # BOARD_ASUS_A8N_E diff --git a/src/mainboard/asus/a8n_e/Kconfig.name b/src/mainboard/asus/a8n_e/Kconfig.name deleted file mode 100644 index 02b00e7dd8..0000000000 --- a/src/mainboard/asus/a8n_e/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_A8N_E - bool "A8N-E" diff --git a/src/mainboard/asus/a8n_e/acpi_tables.c b/src/mainboard/asus/a8n_e/acpi_tables.c deleted file mode 100644 index da90fd3ddf..0000000000 --- a/src/mainboard/asus/a8n_e/acpi_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "../../../northbridge/amd/amdk8/acpi.h" - -/* APIC */ -unsigned long acpi_fill_madt(unsigned long current) -{ - struct device *dev; - struct resource *res; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write NVIDIA CK804 IOAPIC. */ - dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); - ASSERT(dev != NULL); - - res = find_resource(dev, PCI_BASE_ADDRESS_1); - ASSERT(res != NULL); - - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0); - - /* Initialize interrupt mapping if mptable.c didn't. */ -#if (!CONFIG_GENERATE_MP_TABLE) -#error untested config - pci_write_config32(dev, 0x7c, 0x0120d218); - pci_write_config32(dev, 0x80, 0x12008a00); - pci_write_config32(dev, 0x84, 0x0000007d); -#endif - - /* IRQ of timer */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - /* IRQ9 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* create all subtables for processors */ - /* acpi_create_madt_lapic_nmis returns current, not size. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/a8n_e/board_info.txt b/src/mainboard/asus/a8n_e/board_info.txt deleted file mode 100644 index 2e3e6424e0..0000000000 --- a/src/mainboard/asus/a8n_e/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/ -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y -Release year: 2005 diff --git a/src/mainboard/asus/a8n_e/cmos.default b/src/mainboard/asus/a8n_e/cmos.default deleted file mode 100644 index 84dd0274af..0000000000 --- a/src/mainboard/asus/a8n_e/cmos.default +++ /dev/null @@ -1,11 +0,0 @@ -boot_option=Fallback -debug_level=Spew -power_on_after_fail=Enable -ECC_memory=Disable -hw_scrubber=Enable -interleave_chip_selects=Enable -max_mem_clock=DDR400 -multi_core=Enable -slow_cpu=off -nmi=Enable -iommu=Enable diff --git a/src/mainboard/asus/a8n_e/cmos.layout b/src/mainboard/asus/a8n_e/cmos.layout deleted file mode 100644 index dc2977b250..0000000000 --- a/src/mainboard/asus/a8n_e/cmos.layout +++ /dev/null @@ -1,56 +0,0 @@ -entries - 0 384 r 0 reserved_memory - 384 1 e 4 boot_option - 386 1 e 1 ECC_memory - 388 4 h 0 reboot_counter -# 392 3 r 0 unused - 395 1 e 1 hw_scrubber - 396 1 e 1 interleave_chip_selects - 397 2 e 8 max_mem_clock - 399 1 e 2 multi_core - 400 1 e 1 power_on_after_fail - 412 4 e 6 debug_level - 440 4 e 9 slow_cpu - 444 1 e 1 nmi - 445 1 e 1 iommu - 728 256 h 0 user_data - 984 16 h 0 check_sum -# Reserve the extended AMD configuration registers - 1000 24 r 0 reserved_memory1 - -enumerations - -#ID value text - 1 0 Disable - 1 1 Enable - 2 0 Enable - 2 1 Disable - 4 0 Fallback - 4 1 Normal - - 6 5 Notice - 6 6 Info - 6 7 Debug - 6 8 Spew - 7 0 Network - 7 1 HDD - 7 2 Floppy - 7 8 Fallback_Network - 7 9 Fallback_HDD - 7 10 Fallback_Floppy - 8 0 DDR400 - 8 1 DDR333 - 8 2 DDR266 - 8 3 DDR200 - 9 0 off - 9 1 87.5 % - 9 2 75.0 % - 9 3 62.5 % - 9 4 50.0 % - 9 5 37.5 % - 9 6 25.0 % - 9 7 12.5 % - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/a8n_e/devicetree.cb b/src/mainboard/asus/a8n_e/devicetree.cb deleted file mode 100644 index bbbfeb89f2..0000000000 --- a/src/mainboard/asus/a8n_e/devicetree.cb +++ /dev/null @@ -1,121 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_939 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - - device domain 0 on # PCI domain - subsystemid 0x1043 0x815a inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x0000 - irq 0x70 = 0x00 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x71 = 2 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - irq 0x71 = 2 - end - device pnp 2e.7 on # GPIO config - io 0x60 = 0x0800 - io 0x62 = 0x0808 - io 0x64 = 0x0810 - # Set GPIO 1 & 2 - io 0x25 = 0x0000 - # Set GPIO 3 & 4 - io 0x27 = 0x2540 - # GPIO Polarity for Set 3 - io 0xb2 = 0x2100 - # GPIO Pin Internal Pull up for Set 3 - io 0xba = 0x0100 - # Simple I/O register config - io 0xc0 = 0x0000 - io 0xc2 = 0x2540 - io 0xc8 = 0x0000 - io 0xca = 0x0500 - end - device pnp 2e.8 on # MIDI port - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.a off # IR (N/A on this board) - io 0x60 = 0x310 - irq 0x70 = 11 - end - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic # DIMM 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic # DIMM 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # DIMM 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic # DIMM 0-1-1 - # device i2c 53 on end - # end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # Onboard audio (ACI) - device pci 4.1 off end # Onboard modem (MCI), N/A - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 on end # PCI E 3 - device pci c.0 on end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # TODO - # register "mac_eeprom_smbus" = "3" - # register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/a8n_e/dsdt.asl b/src/mainboard/asus/a8n_e/dsdt.asl deleted file mode 100644 index 45aeaf1c21..0000000000 --- a/src/mainboard/asus/a8n_e/dsdt.asl +++ /dev/null @@ -1,265 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - Name (PICM, 0x00) - Method (_PIC, 1, Serialized) { - Store (Arg0, PICM) - } - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device (CK804) */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - \_SB.GXXX(node, link) - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - -#include "southbridge/nvidia/ck804/acpi/ck804.asl" - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LLAS, 0x00 },//APCS - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LLAS, 0x00 },//APCS - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LUOH, 0x00 },//APCF - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LUEH, 0x00 },//APCL - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LAUD, 0x00 },//APCJ - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LMOD, 0x00 },//APCK - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LPA0, 0x00 },//APCZ - Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LSA0, 0x00 },//APSI - Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LSA1, 0x00 },//APSJ - - Package (0x04) { 0x0009FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - - Package (0x04) { 0x000AFFFF, 0x00, \_SB.PCI0.LEMA, 0x00 },//APCH - - Package (0x04) { 0x000BFFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//APC2 - Package (0x04) { 0x000BFFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },//APC3 - Package (0x04) { 0x000BFFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },//APC4 - Package (0x04) { 0x000BFFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },//APC1 - - Package (0x04) { 0x000CFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//APC1 - Package (0x04) { 0x000CFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },//APC2 - Package (0x04) { 0x000CFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },//APC3 - Package (0x04) { 0x000CFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },//APC4 - - Package (0x04) { 0x000DFFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },//APC4 - Package (0x04) { 0x000DFFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },//APC1 - Package (0x04) { 0x000DFFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },//APC2 - Package (0x04) { 0x000DFFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },//APC3 - - Package (0x04) { 0x000EFFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },//APC3 - Package (0x04) { 0x000EFFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },//APC4 - Package (0x04) { 0x000EFFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },//APC1 - Package (0x04) { 0x000EFFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },//APC2 - }) - - Device (PCIC) - { - Name (_ADR, 0x00090000) - Name (_UID, 0x00) - Name (_PRT, Package () { - /* AGR slot */ - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - /* 2:00 PCIe x1 */ - Device (PEX1) - { - Name (_ADR, 0x000d0000) - Name (_UID, 0x00) - } - - /* 3:00 PCIe x16 */ - Device (PEX0) - { - Name (_ADR, 0x000e0000) - Name (_UID, 0x00) - } - - Device (LPC) { - Name (_HID, EisaId ("PNP0A05")) - Name (_ADR, 0x00010000) - - OperationRegion (CF44, PCI_Config, 0x44, 0x04) - Field (CF44, ByteAcc, NoLock, Preserve) - { - ETBA, 32, - } - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* Parallel port */ - Device (LP0) - { - Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - FixedIO (0x0378, 0x10) - IRQNoFlags () {7} - }) - Return (TMP) - } - } - - /* Floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - FixedIO (0x03F0, 0x08) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } -#if 0 - Device (HPET) - { - Name (_HID, EisaId ("PNP0103")) - Name (CRS, ResourceTemplate () - { - Memory32Fixed (ReadOnly, - 0x00000000, - 0x00001000, - _Y02) - }) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._BAS, HPT) - Store (ETBA, HPT) - Return (CRS) - } - - } -#endif - } - } - } -} diff --git a/src/mainboard/asus/a8n_e/get_bus_conf.c b/src/mainboard/asus/a8n_e/get_bus_conf.c deleted file mode 100644 index b1e94d8896..0000000000 --- a/src/mainboard/asus/a8n_e/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* - * Global variables for MB layouts and these will be shared by irqtable, - * mptable and acpi_tables. - */ -/* busnum is default */ -unsigned char bus_ck804[6]; -unsigned apicid_ck804; - -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed - * or not. You may need to preset pci1234 for HT-IO board, please refer to - * src/northbridge/amd/amdk8/get_sblk_pci1234.c for details. - */ -unsigned pci1234x[] = { - 0x0000ff0, /* No HTIO for A8N-E */ -}; - -/* - * HT Chain device num, actually it is unit id base of every ht device in - * chain, assume every chain only have 4 ht device at most. - */ -unsigned hcdnx[] = { - 0x20202020, /* A8N-E has only one ht-chain */ -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base, sbdn; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - /* FIXME: Is this really needed twice? */ - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 6; i++) - bus_ck804[i] = 0; - - bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* CK804 */ - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x09, 0)); - if (dev) { - bus_ck804[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804[2]++; - } else { - printk - (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x09); - bus_ck804[1] = 2; - bus_ck804[2] = 3; - } - - for (i = 2; i < 6; i++) { - dev = dev_find_slot(bus_ck804[0], - PCI_DEVFN(sbdn + 0x0b + i - 2, 0)); - if (dev) { - bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804[0], sbdn + 0x0b + i - 2); - } - } - - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_ck804 = apicid_base + 0; -} diff --git a/src/mainboard/asus/a8n_e/irq_tables.c b/src/mainboard/asus/a8n_e/irq_tables.c deleted file mode 100644 index 59d506df01..0000000000 --- a/src/mainboard/asus/a8n_e/irq_tables.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_isa; -extern unsigned char bus_ck804[6]; - - -/** - * Add one line to IRQ table. - */ -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -/** - * Create the IRQ routing table. - * Values are derived from getpir generated code. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num, sbdn; - uint8_t *v, sum = 0; - int i; - - /* get_bus_conf() will find out all bus num and APIC that share with - * mptable.c and mptable.c. - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000. */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_ck804[0]; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - pirq->exclusive_irqs = 0x828; - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* Slot1 PCIE 16x */ - write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, - 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); - pirq_info++; - slot_num++; - - /* Slot2 PCIE 1x */ - write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); - pirq_info++; - slot_num++; - - /* Slot3 PCIE 1x */ - write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); - pirq_info++; - slot_num++; - - /* Slot4 PCIE 4x */ - write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, 7, 0); - pirq_info++; - slot_num++; - - /* Slot5 - Slot7 PCI */ - for (i = 0; i < 3; i++) { - write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, - ((i + 0) % 4) + 1, 0xdeb8, - ((i + 1) % 4) + 1, 0xdeb8, - ((i + 2) % 4) + 1, 0xdeb8, - ((i + 3) % 4) + 1, 0xdeb8, i, 0); - pirq_info++; - slot_num++; - } - - /* PCI bridge */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); - pirq_info++; - slot_num++; - - /* SMBus */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* USB */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* Audio */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* SATA */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* SATA */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* NIC */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -#if 0 - /* Firewire? */ - write_pirq_info(pirq_info, bus_ck804_1, (0x5 << 3) | 0, 0x3, 0xdeb8, 0, - 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/asus/a8n_e/mptable.c b/src/mainboard/asus/a8n_e/mptable.c deleted file mode 100644 index 40a06a4c77..0000000000 --- a/src/mainboard/asus/a8n_e/mptable.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; -extern unsigned apicid_ck804; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, - res2mmio(res, 0, 0)); - } - - /* Initialize interrupt mapping. */ - dword = 0x01200000; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x12008009; - pci_write_config32(dev, 0x80, dword); - - dword = 0x0002010d; - pci_write_config32(dev, 0x84, dword); - - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0); - - // Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 1) << 2) | 1, apicid_ck804, - 0xa); - - // Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 2) << 2) | 0, apicid_ck804, - 0x15); - - // Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 2) << 2) | 1, apicid_ck804, - 0x14); - - /* Onboard audio */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 4) << 2) | 0, apicid_ck804, 0x3); - - // Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 7) << 2) | 0, apicid_ck804, - 0x17); - - // Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 8) << 2) | 0, apicid_ck804, - 0x16); - - // Onboard ck804 NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 10) << 2) | 0, apicid_ck804, - 0x17); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_ck804[0]); - - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c deleted file mode 100644 index e4ed339924..0000000000 --- a/src/mainboard/asus/a8n_e/romstage.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Used by ite_enable_serial(). */ -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <cpu/amd/model_fxx_rev.h> -#include <console/console.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include <southbridge/nvidia/ck804/early_smbus.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include <southbridge/nvidia/ck804/early_setup_ss.h> -#include "southbridge/nvidia/ck804/early_setup.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - /* Subject decoding */ - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0) | (1 << 1); /* Serial 0, Serial 1 */ - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, -#endif - }; - - int needs_reset; - unsigned nodes, bsp_apicid = 0; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); -#endif - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - /* It's the time to set ctrl now. */ - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - -#if 0 - dump_spd_registers(&ctrl[0]); - dump_smbus_registers(); -#endif - - sdram_initialize(nodes, ctrl); - -#if 0 - print_pci_devices(); - dump_pci_devices(); -#endif -} diff --git a/src/mainboard/asus/a8n_sli/Kconfig b/src/mainboard/asus/a8n_sli/Kconfig deleted file mode 100644 index e2ac03dea5..0000000000 --- a/src/mainboard/asus/a8n_sli/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_ASUS_A8N_SLI - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "A8N-SLI" - -endif diff --git a/src/mainboard/asus/a8n_sli/Kconfig.name b/src/mainboard/asus/a8n_sli/Kconfig.name deleted file mode 100644 index 700bdc291a..0000000000 --- a/src/mainboard/asus/a8n_sli/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_A8N_SLI - bool "A8N-SLI" diff --git a/src/mainboard/asus/a8n_sli/board_info.txt b/src/mainboard/asus/a8n_sli/board_info.txt deleted file mode 100644 index e9b47eb220..0000000000 --- a/src/mainboard/asus/a8n_sli/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/ -Category: desktop -ROM package: PLCC -ROM socketed: y -Flashrom support: y -Clone of: asus/a8n_e -Release year: 2005 diff --git a/src/mainboard/asus/a8v-e_deluxe/Kconfig b/src/mainboard/asus/a8v-e_deluxe/Kconfig deleted file mode 100644 index b067047ae1..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -if BOARD_ASUS_A8V_E_DELUXE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_939 - select K8_HT_FREQ_1G_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 - select SUPERIO_WINBOND_W83627EHG - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/a8v-e_deluxe - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "A8V-E Deluxe" - -config HW_MEM_HOLE_SIZEK - hex - default 0x0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -endif # BOARD_ASUS_A8V_E_DELUXE diff --git a/src/mainboard/asus/a8v-e_deluxe/Kconfig.name b/src/mainboard/asus/a8v-e_deluxe/Kconfig.name deleted file mode 100644 index c55a1dd02e..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_A8V_E_DELUXE - bool "A8V-E Deluxe" diff --git a/src/mainboard/asus/a8v-e_deluxe/acpi_tables.c b/src/mainboard/asus/a8v-e_deluxe/acpi_tables.c deleted file mode 100644 index 01382ede39..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/acpi_tables.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer <stepan@openbios.org>. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/a8v-e_deluxe/board_info.txt b/src/mainboard/asus/a8v-e_deluxe/board_info.txt deleted file mode 100644 index 497c8e9dfb..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/ -ROM package: PLCC -ROM socketed: y -Flashrom support: y -Release year: 2005 diff --git a/src/mainboard/asus/a8v-e_deluxe/cmos.layout b/src/mainboard/asus/a8v-e_deluxe/cmos.layout deleted file mode 100644 index aae7ceb075..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/a8v-e_deluxe/devicetree.cb b/src/mainboard/asus/a8v-e_deluxe/devicetree.cb deleted file mode 100644 index 5e56acca0a..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/devicetree.cb +++ /dev/null @@ -1,97 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_939 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # PS/2 keyboard & mouse (off) - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 on # GPIO 5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/a8v-e_deluxe/dsdt.asl b/src/mainboard/asus/a8v-e_deluxe/dsdt.asl deleted file mode 100644 index 06cc76accd..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/dsdt.asl +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include <southbridge/via/k8t890/acpi/sleepstates.asl> - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - /* PCI Routing Table */ - /* aaa */ - Name (_PRT, Package () { - Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ - Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ - Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ - Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, - Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ - }) - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x00030001) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, - }) - } - - Device (PEX2) - { - Name (_ADR, 0x00030002) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, - }) - } - - Device (PEX3) - { - Name (_ADR, 0x00030003) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, - }) - } - - Device (ISA) { - Name (_ADR, 0x00110000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - } - } -} diff --git a/src/mainboard/asus/a8v-e_deluxe/mptable.c b/src/mainboard/asus/a8v-e_deluxe/mptable.c deleted file mode 100644 index f3d3d06207..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/mptable.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VIO_APIC_VADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, (void *)K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/a8v-e_deluxe/romstage.c b/src/mainboard/asus/a8v-e_deluxe/romstage.c deleted file mode 100644 index 5ade055bc8..0000000000 --- a/src/mainboard/asus/a8v-e_deluxe/romstage.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) -#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) -#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_conf_state(SERIAL_DEV); - /* We have 24MHz input. */ - reg = pnp_read_config(SERIAL_DEV, 0x24); - pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); - /* We have GPIO for KB/MS pin. */ - reg = pnp_read_config(SERIAL_DEV, 0x2a); - pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); - /* We have all RESTOUT and even some reserved bits, too. */ - reg = pnp_read_config(SERIAL_DEV, 0x2c); - pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); - pnp_exit_conf_state(SERIAL_DEV); - - pnp_enter_conf_state(ACPI_DEV); - pnp_set_logical_device(ACPI_DEV); - /* - * Set the delay rising time from PWROK_LP to PWROK_ST to - * 300 - 600ms, and 0 to vice versa. - */ - reg = pnp_read_config(ACPI_DEV, 0xe6); - pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); - /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ - reg = pnp_read_config(ACPI_DEV, 0xe4); - pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); - pnp_exit_conf_state(ACPI_DEV); - - pnp_enter_conf_state(GPIO_DEV); - pnp_set_logical_device(GPIO_DEV); - /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ - pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ - pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0 = output 1 = input */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0 = output 1 = input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ - pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ - pnp_exit_conf_state(GPIO_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting... romstage\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - printk(BIOS_INFO, "now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... Core0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/asus/a8v-e_se/Kconfig b/src/mainboard/asus/a8v-e_se/Kconfig deleted file mode 100644 index 0188ff98b5..0000000000 --- a/src/mainboard/asus/a8v-e_se/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -if BOARD_ASUS_A8V_E_SE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_939 - select K8_HT_FREQ_1G_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 - select SUPERIO_WINBOND_W83627EHG - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/a8v-e_se - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "A8V-E SE" - -config HW_MEM_HOLE_SIZEK - hex - default 0x0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -endif # BOARD_ASUS_A8V_E_SE diff --git a/src/mainboard/asus/a8v-e_se/Kconfig.name b/src/mainboard/asus/a8v-e_se/Kconfig.name deleted file mode 100644 index 34afcd89c0..0000000000 --- a/src/mainboard/asus/a8v-e_se/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_A8V_E_SE - bool "A8V-E SE" diff --git a/src/mainboard/asus/a8v-e_se/acpi_tables.c b/src/mainboard/asus/a8v-e_se/acpi_tables.c deleted file mode 100644 index ab9811a127..0000000000 --- a/src/mainboard/asus/a8v-e_se/acpi_tables.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer <stepan@openbios.org>. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/a8v-e_se/board_info.txt b/src/mainboard/asus/a8v-e_se/board_info.txt deleted file mode 100644 index c08475a48b..0000000000 --- a/src/mainboard/asus/a8v-e_se/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/ -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y -Release year: 2006 diff --git a/src/mainboard/asus/a8v-e_se/cmos.layout b/src/mainboard/asus/a8v-e_se/cmos.layout deleted file mode 100644 index aae7ceb075..0000000000 --- a/src/mainboard/asus/a8v-e_se/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/a8v-e_se/devicetree.cb b/src/mainboard/asus/a8v-e_se/devicetree.cb deleted file mode 100644 index f2d078a74e..0000000000 --- a/src/mainboard/asus/a8v-e_se/devicetree.cb +++ /dev/null @@ -1,97 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_939 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # PS/2 keyboard & mouse (off) - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 on # GPIO 5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/a8v-e_se/dsdt.asl b/src/mainboard/asus/a8v-e_se/dsdt.asl deleted file mode 100644 index 1da24173e3..0000000000 --- a/src/mainboard/asus/a8v-e_se/dsdt.asl +++ /dev/null @@ -1,239 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - #include <southbridge/via/k8t890/acpi/sleepstates.asl> - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ - Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ - Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ - Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, - Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ - }) - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x00030001) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, - }) - } - - Device (PEX2) - { - Name (_ADR, 0x00030002) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, - }) - } - - Device (PEX3) - { - Name (_ADR, 0x00030003) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, - }) - } - - Device (ISA) { - Name (_ADR, 0x00110000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - /* Dummy device to hold auto generated reserved resources */ - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - - } - } -} diff --git a/src/mainboard/asus/a8v-e_se/mptable.c b/src/mainboard/asus/a8v-e_se/mptable.c deleted file mode 100644 index f3d3d06207..0000000000 --- a/src/mainboard/asus/a8v-e_se/mptable.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VIO_APIC_VADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, (void *)K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c deleted file mode 100644 index 2df2a48815..0000000000 --- a/src/mainboard/asus/a8v-e_se/romstage.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) -#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) -#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_conf_state(SERIAL_DEV); - /* We have 24MHz input. */ - reg = pnp_read_config(SERIAL_DEV, 0x24); - pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); - /* We have GPIO for KB/MS pin. */ - reg = pnp_read_config(SERIAL_DEV, 0x2a); - pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); - /* We have all RESTOUT and even some reserved bits, too. */ - reg = pnp_read_config(SERIAL_DEV, 0x2c); - pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); - pnp_exit_conf_state(SERIAL_DEV); - - pnp_enter_conf_state(ACPI_DEV); - pnp_set_logical_device(ACPI_DEV); - /* - * Set the delay rising time from PWROK_LP to PWROK_ST to - * 300 - 600ms, and 0 to vice versa. - */ - reg = pnp_read_config(ACPI_DEV, 0xe6); - pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); - /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ - reg = pnp_read_config(ACPI_DEV, 0xe4); - pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); - pnp_exit_conf_state(ACPI_DEV); - - pnp_enter_conf_state(GPIO_DEV); - pnp_set_logical_device(GPIO_DEV); - /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ - pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ - pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0 = output 1 = input */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0 = output 1 = input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ - pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ - pnp_exit_conf_state(GPIO_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - 0, 0, 0, 0, - // Node 1 - DIMM1, DIMM3, 0, 0, - 0, 0, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting... fallback\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - printk(BIOS_INFO, "now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... Core0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/asus/k8v-x/Kconfig b/src/mainboard/asus/k8v-x/Kconfig deleted file mode 100644 index 674059b0a5..0000000000 --- a/src/mainboard/asus/k8v-x/Kconfig +++ /dev/null @@ -1,69 +0,0 @@ -if BOARD_ASUS_K8V_X - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_754 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD - select SUPERIO_WINBOND_W83697HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select SET_FIDVID - select K8_FORCE_2T_DRAM_TIMING - select PIRQ_ROUTE - -config MAINBOARD_DIR - string - default asus/k8v-x - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "K8V-X" - -config AGP_APERTURE_SIZE - hex - default 0x10000000 - -config HW_MEM_HOLE_SIZEK - hex - default 0x0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_ASUS_K8V_X diff --git a/src/mainboard/asus/k8v-x/Kconfig.name b/src/mainboard/asus/k8v-x/Kconfig.name deleted file mode 100644 index 20a46315fa..0000000000 --- a/src/mainboard/asus/k8v-x/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_K8V_X - bool "K8V-X" diff --git a/src/mainboard/asus/k8v-x/acpi_tables.c b/src/mainboard/asus/k8v-x/acpi_tables.c deleted file mode 100644 index b992d1ad08..0000000000 --- a/src/mainboard/asus/k8v-x/acpi_tables.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer <stepan@openbios.org>. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8x8xx.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/k8v-x/board_info.txt b/src/mainboard/asus/k8v-x/board_info.txt deleted file mode 100644 index 65a26e43fd..0000000000 --- a/src/mainboard/asus/k8v-x/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Release year: 2005 diff --git a/src/mainboard/asus/k8v-x/cmos.layout b/src/mainboard/asus/k8v-x/cmos.layout deleted file mode 100644 index aae7ceb075..0000000000 --- a/src/mainboard/asus/k8v-x/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/k8v-x/devicetree.cb b/src/mainboard/asus/k8v-x/devicetree.cb deleted file mode 100644 index 7764413c52..0000000000 --- a/src/mainboard/asus/k8v-x/devicetree.cb +++ /dev/null @@ -1,113 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_754 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0x80ed inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - register "usb2_termination_set" = "1" - register "usb2_termination_a" = "8" - register "usb2_termination_b" = "8" - register "usb2_termination_c" = "6" - register "usb2_termination_d" = "6" - register "usb2_termination_e" = "6" - register "usb2_termination_f" = "6" - register "usb2_termination_g" = "6" - register "usb2_termination_h" = "6" - register "usb2_dpll_set" = "1" - register "usb2_dpll_delay" = "3" - register "int_efgh_as_gpio" = "1" - register "enable_gpo3" = "1" - register "disable_gpo26_gpo27" = "1" - register "enable_aol_2_smb_slave" = "1" - register "enable_gpo5" = "1" - register "gpio15_12_dir_output" = "1" - device pci 0.0 on # HT - subsystemid 0x1043 0x80a3 - end - device pci a.0 on # GbE - subsystemid 0x1043 0x811a - end - device pci f.0 on end # SATA - device pci f.1 on end # IDE - device pci 10.0 on end # USB1 - device pci 10.1 on end # USB1 - device pci 10.2 on end # USB1 - device pci 10.3 on end # USB1 - device pci 10.4 on end # USB2 - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip superio/winbond/w83697hf # Super I/O - register "hwmon_fan1_divisor" = "128" - register "hwmon_fan2_divisor" = "4" - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - end - device pnp 2e.6 off # CIR - end - device pnp 2e.7 off # Game port/GPIO 1 - end - device pnp 2e.8 off # MIDI/GPIO 5 - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - irq 0x24 = 0x28 # Global CR24 change bit3: MEMW# Enable - end - end - end - device pci 11.5 on # AC97 Audio - subsystemid 0x1043 0x80b0 - end - device pci 11.6 on end # AC97 Modem - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/k8v-x/dsdt.asl b/src/mainboard/asus/k8v-x/dsdt.asl deleted file mode 100644 index fc96e7630c..0000000000 --- a/src/mainboard/asus/k8v-x/dsdt.asl +++ /dev/null @@ -1,176 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - #include <southbridge/via/k8t890/acpi/sleepstates.asl> - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP slot, effectively */ - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ - Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ - Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ - Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x000EFFFF, 0x00, 0x00, 0x13 }, /* Slot 0xE */ - Package (0x04) { 0x000EFFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x000EFFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x000EFFFF, 0x03, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x10 }, /* Slot 0x9 */ - Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x11 }, /* Marvell 88E8001 ethernet */ - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 } /* AC97, MC97 */ - }) - - Device (ISA) { - Name (_ADR, 0x00110000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - /* Dummy device to hold auto generated reserved resources */ - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - - } - } -} diff --git a/src/mainboard/asus/k8v-x/irq_tables.c b/src/mainboard/asus/k8v-x/irq_tables.c deleted file mode 100644 index 51b7dd1198..0000000000 --- a/src/mainboard/asus/k8v-x/irq_tables.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Urja Rannikko <urjaman@gmail.com> - * - * Code based on KFSN4-DRE irq_tables.c: - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint8_t link1, uint8_t link2, - uint8_t link3, uint8_t slot, uint8_t rfu) -{ - const uint16_t valid_irqs = 0xccb8; - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = link0 ? valid_irqs : 0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = link1 ? valid_irqs : 0; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = link2 ? valid_irqs : 0; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = link3 ? valid_irqs : 0; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - uint8_t *v, sum = 0; - unsigned int slot_num = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr = ALIGN_UP(addr, 16); - - /* This table must be between 0xf0000 & 0x100000. */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - pirq->rtr_bus = 0; - pirq->rtr_devfn = ((0x11) << 3) | 0; - pirq->exclusive_irqs = 0; - pirq->rtr_vendor = PCI_VENDOR_ID_VIA; - pirq->rtr_device = PCI_DEVICE_ID_VIA_VT8237R_LPC; - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - - /* AGP Bridge. */ - write_pirq_info(pirq_info, 0, (0x01 << 3) | 0, 1, 2, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* ISA Bridge + AC97 + MC97 */ - write_pirq_info(pirq_info, 0, (0x11 << 3) | 0, 0, 0, 3, 0, 0, 0); - pirq_info++; - slot_num++; - - /* PATA and SATA. */ - write_pirq_info(pirq_info, 0, (0x0f << 3) | 0, 1, 2, 3, 5, 0, 0); - pirq_info++; - slot_num++; - - /* USB (UHCI and EHCI) */ - write_pirq_info(pirq_info, 0, (0x10 << 3) | 0, 1, 2, 3, 5, 0, 0); - pirq_info++; - slot_num++; - - /* 5 PCI Slots */ - write_pirq_info(pirq_info, 0, (0x0b << 3) | 0, 1, 2, 3, 5, 1, 0); - pirq_info++; - slot_num++; - - write_pirq_info(pirq_info, 0, (0x0c << 3) | 0, 2, 3, 5, 1, 2, 0); - pirq_info++; - slot_num++; - - write_pirq_info(pirq_info, 0, (0x0d << 3) | 0, 3, 5, 1, 2, 3, 0); - pirq_info++; - slot_num++; - - write_pirq_info(pirq_info, 0, (0x0e << 3) | 0, 5, 1, 2, 3, 4, 0); - pirq_info++; - slot_num++; - - write_pirq_info(pirq_info, 0, (0x09 << 3) | 0, 1, 2, 3, 5, 5, 0); - pirq_info++; - slot_num++; - - /* Ethernet */ - write_pirq_info(pirq_info, 0, (0x0a << 3) | 0, 2, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* AGP Slot. */ - write_pirq_info(pirq_info, 1, (0x00 << 3) | 0, 1, 2, 0, 0, 6, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - /* Call copy for side effects: setting PCI IRQ registers. Hack? */ - return copy_pirq_routing_table(addr, pirq); -} diff --git a/src/mainboard/asus/k8v-x/mainboard.c b/src/mainboard/asus/k8v-x/mainboard.c deleted file mode 100644 index 9f35cd389b..0000000000 --- a/src/mainboard/asus/k8v-x/mainboard.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2010 Tobias Diedrich <ranma+coreboot@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include "southbridge/via/vt8237r/vt8237r.h" - -u32 vt8237_ide_80pin_detect(struct device *dev) -{ - struct device *lpc_dev; - u16 acpi_io_base; - u32 gpio_in; - u32 res; - - lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC, 0); - if (!lpc_dev) - return 0; - - acpi_io_base = pci_read_config16(lpc_dev, 0x88) & ~1; - if (!acpi_io_base) - return 0; - - /* select function GPIO29 for pin AB9 */ - pci_write_config8(lpc_dev, 0xe5, pci_read_config8(lpc_dev, 0xe5) | 0x08); - - gpio_in = inl(acpi_io_base + 0x48); - /* bit 29 for primary port, clear if unconnected or 80-pin cable */ - res = gpio_in & (1 << 29) ? 0 : VT8237R_IDE0_80PIN_CABLE; - /* bit 8 for secondary port, clear if unconnected or 80-pin cable */ - res |= gpio_in & (1 << 8) ? 0 : VT8237R_IDE1_80PIN_CABLE; - - printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "primary", - res & VT8237R_IDE0_80PIN_CABLE ? 80 : 40); - printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "secondary", - res & VT8237R_IDE1_80PIN_CABLE ? 80 : 40); - - return res; -} diff --git a/src/mainboard/asus/k8v-x/mptable.c b/src/mainboard/asus/k8v-x/mptable.c deleted file mode 100644 index 8525b029f1..0000000000 --- a/src/mainboard/asus/k8v-x/mptable.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8x8xx.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VIO_APIC_VADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, (void *)K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/k8v-x/romstage.c b/src/mainboard/asus/k8v-x/romstage.c deleted file mode 100644 index 053028497a..0000000000 --- a/src/mainboard/asus/k8v-x/romstage.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83697hf/w83697hf.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM1, DIMM2, 0, - 0, 0, 0, 0, - // Node 1 - 0, 0, 0, 0, - 0, 0, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting... fallback\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - printk(BIOS_INFO, "now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... Core0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq change may cause HT disconnect */ - vt8237_sb_enable_fid_vid(); - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* this seems to be some GPIO on the SMBus--in any case, setting these - * two bits reduces the pullup impedance of the bus lines and is required - * in order to be able to read SPD info */ - smbus_write_byte(0x48, 0x07, smbus_read_byte(0x48, 0x07) | 0x80); - smbus_write_byte(0x4a, 0x07, smbus_read_byte(0x4a, 0x07) | 0x10); - - unsigned char mask; - - mask = 0; -// mask |= 1 /* AGP voltage 1.7 V (not verified, just vendor BIOS value) */ -// mask |= 2 /* V-Link voltage 2.6 V (not verified either) */ - smbus_write_byte(0x4a, 0x00, (smbus_read_byte(0x4a, 0x00) & ~0x0f) | (0x0f ^ (mask << 2))); - smbus_write_byte(0x4a, 0x01, (smbus_read_byte(0x4a, 0x01) & ~0x03) | (0x03 ^ mask)); - - mask = 25; /* RAM voltage in decivolts, valid range from 25 to 28 */ - mask = 3 - (mask - 25); - smbus_write_byte(0x4a, 0x02, 0x4f | (mask << 4)); - smbus_write_byte(0x4a, 0x03, 0x04 | mask); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/Kconfig b/src/mainboard/asus/kfsn4-dre_k8/Kconfig deleted file mode 100644 index 0d13a4ece4..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/Kconfig +++ /dev/null @@ -1,98 +0,0 @@ -if BOARD_ASUS_KFSN4_DRE_K8 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select QRANK_DIMM_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select SUPERIO_WINBOND_W83627THG - select PARALLEL_CPU_INIT - select HAVE_HARD_RESET - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select K8_ALLOCATE_IO_RANGE - select DRIVERS_I2C_W83793 - select DRIVERS_XGI_Z9S - -config MAINBOARD_DIR - string - default "asus/kfsn4-dre_k8" - -config BOOTBLOCK_MAINBOARD_INIT - string - default "mainboard/asus/kfsn4-dre_k8/bootblock.c" - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "KFSN4-DRE_K8" - -config HW_MEM_HOLE_SIZEK - hex - default 0x100000 - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config MEM_TRAIN_SEQ - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 13 - -config CK804_PCI_E_X - int - default 1 - -config CK804_PCIE_PME_WAKE - bool - default y - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config MAINBOARD_POWER_ON_AFTER_POWER_FAIL - bool - default y - -config MAX_REBOOT_CNT - int - default 10 - -endif # BOARD_ASUS_KFSN4_DRE_K8 diff --git a/src/mainboard/asus/kfsn4-dre_k8/Kconfig.name b/src/mainboard/asus/kfsn4-dre_k8/Kconfig.name deleted file mode 100644 index 5720f3ef3f..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_KFSN4_DRE_K8 - bool "KFSN4-DRE_K8" diff --git a/src/mainboard/asus/kfsn4-dre_k8/acpi/pm_ctrl.asl b/src/mainboard/asus/kfsn4-dre_k8/acpi/pm_ctrl.asl deleted file mode 100644 index 0afb841435..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/acpi/pm_ctrl.asl +++ /dev/null @@ -1,241 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * Copyright (C) 2010 - 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * WARNING: Sleep/Wake is a work in progress and is still somewhat flaky! - */ - - /* SuperIO control port */ - Name (SPIO, 0x2E) - - /* SuperIO control map */ - OperationRegion (SPIM, SystemIO, SPIO, 0x02) - Field (SPIM, ByteAcc, NoLock, Preserve) { - INDX, 8, - DATA, 8 - } - - /* SuperIO control registers */ - IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) { - Offset (0x07), - CR07, 8, /* Logical device number */ - Offset (0x2C), - CR2C, 8, /* GPIO3 multiplexed pin selection */ - Offset (0x30), - CR30, 8, /* Logical device activation control register */ - Offset (0xE0), - CRE0, 8, /* Wake control register */ - Offset (0xE6), - CRE6, 8, /* Mouse wake event configuration register */ - Offset (0xF1), - CRF1, 8, /* GPIO3 data register */ - Offset (0xF3), - CRF3, 8, /* SUSLED mode register */ - Offset (0xF6), - CRF6, 8, /* SMI/PME event generation control register */ - Offset (0xF9), - CRF9, 8, /* ACPI PME configuration register */ - } - - /* Southbridge control ports */ - /* Both are offsets from PM base address (0x2000) */ - Name (SBC1, 0x2090) /* Offset 0x90 */ - Name (SBC2, 0x2400) /* Offset 0x400 */ - - /* Southbridge control maps */ - OperationRegion (SBM1, SystemIO, SBC1, 0x10) - Field (SBM1, ByteAcc, NoLock, Preserve) { - S1CT, 2, - Offset (0x04), - S3CT, 2, - Offset (0x08), - S4CT, 2, - Offset (0x0C), - S5CT, 2, - } - OperationRegion (SBM2, SystemIO, SBC2, 0x08) - Field (SBM2, ByteAcc, NoLock, Preserve) { - , 15, - PS1S, 1, - , 31, - PS1E, 1, - } - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* Set up LEDs */ - /* Access SuperIO GPIO3/GPIO4 device */ - Store(0x87, INDX) - Store(0x87, INDX) - Store(0x09, CR07) - - /* Set GPIO3 pin 64 (power LED) to GP37 mode */ - And(CR2C, 0xF3, Local0) - Or(Local0, 0x04, CR2C) - - /* Set power LED to steady on */ - Or(CRF1, 0x80, CRF1) - - /* Restore default SuperIO access */ - Store(0xAA, INDX) - - /* Configure SuperIO for wake */ - /* Access SuperIO ACPI device */ - Store(0x87, INDX) - Store(0x87, INDX) - Store(0x0A, CR07) - - if (LEqual(Arg0, One)) /* Resuming from power state S1 */ - { - /* Set power management to SMI mode and disable SMI events */ - And(CRF9, 0xFA, CRF9) - - /* Deactivate the ACPI device */ - Store(Zero, CR30) - - /* Disable PS/2 SMI/PME events */ - And(CRF6, 0xCF, CRF6) - } - if (Lor(LEqual(Arg0, 0x03), LEqual(Arg0, 0x04))) /* Resuming from power state S3 or S4 */ - { - /* Disable PS/2 wake */ - And(CRE0, 0x1D, CRE0) - And(CRE6, 0x7F, CRE6) - } - - /* Restore default SuperIO access */ - Store(0xAA, INDX) - - /* Configure southbridge for wake */ - Store(Zero, PS1E) - Store(0x02, S1CT) - Store(0x02, S3CT) - Store(0x02, S4CT) - Store(0x02, S5CT) - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - - Return(WKST) - } /* End Method(\_WAK) */ - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* Set up LEDs */ - if (LEqual(Arg0, One)) /* Power state S1 requested */ - { - /* Access SuperIO GPIO3/GPIO4 device */ - Store(0x87, INDX) - Store(0x87, INDX) - Store(0x09, CR07) - - /* Set GPIO3 pin 64 (power LED) to SUSLED mode */ - And(CR2C, 0xF3, CR2C) - - /* Set suspend LED to 1Hz toggle pulse with 50% duty cycle */ - Or(CRF3, 0x80, CRF3) - - /* Restore default SuperIO access */ - Store(0xAA, INDX) - } - - /* Configure SuperIO for sleep */ - /* Access SuperIO ACPI device */ - Store(0x87, INDX) - Store(0x87, INDX) - Store(0x0A, CR07) - - /* Disable PS/2 wakeup and connect PANSW_IN to PANSW_OUT */ - And(CRE0, 0x1F, CRE0) - - if (LEqual(Arg0, One)) /* Power state S1 requested */ - { - /* Set power management to PME mode and enable PME events */ - Or(CRF9, 0x05, CRF9) - - /* Activate the ACPI device */ - Store(One, CR30) - - /* Enable PS/2 keyboard SMI/PME events */ - And(CRF6, 0xEF, CRF6) - - /* Enable PS/2 keyboard wake */ - Or(CRE0, 0x40, CRE0) - - /* Enable PS/2 mouse SMI/PME events */ - And(CRF6, 0xDF, CRF6) - - /* Enable PS/2 mouse wake */ - Or(CRE0, 0x20, CRE0) - } - else { - /* Enable PS/2 keyboard wake on any keypress */ - Or(CRE0, 0x41, CRE0) - - /* Enable PS/2 mouse wake on any click */ - Or(CRE0, 0x22, CRE0) - Or(CRE6, 0x80, CRE6) - } - - /* Restore default SuperIO access */ - Store(0xAA, INDX) - - /* Configure southbridge for sleep */ - Store(One, PS1S) - Store(One, PS1E) - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(\_PTS) */ diff --git a/src/mainboard/asus/kfsn4-dre_k8/acpi_tables.c b/src/mainboard/asus/kfsn4-dre_k8/acpi_tables.c deleted file mode 100644 index 6061f89819..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/acpi_tables.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - */ - -#include <console/console.h> -#include <string.h> -#include <assert.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> - -/* APIC */ -unsigned long acpi_fill_madt(unsigned long current) -{ - struct device *dev; - struct resource *res; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write NVIDIA CK804 IOAPIC. */ - dev = dev_find_slot(0x0, PCI_DEVFN(sysconf.sbdn + 0x1, 0)); - ASSERT(dev != NULL); - - res = find_resource(dev, PCI_BASE_ADDRESS_1); - ASSERT(res != NULL); - - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0); - - /* Initialize interrupt mapping if mptable.c didn't. */ - if (!IS_ENABLED(CONFIG_GENERATE_MP_TABLE)) { - /* Copied from mptable.c */ - /* Enable interrupts for commonly used devices (USB, SATA, etc.) */ - pci_write_config32(dev, 0x7c, 0x0d800018); - pci_write_config32(dev, 0x80, 0xd8002009); - pci_write_config32(dev, 0x84, 0x00000001); - } - -// /* IRQ of timer (override IRQ0 --> APIC IRQ2) */ -// current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) -// current, 0, 0, 2, 0); - /* IRQ9 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - /* IRQ14 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 14, 14, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH); - /* IRQ15 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 15, 15, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH); - - /* create all subtables for processors */ - /* acpi_create_madt_lapic_nmis returns current, not size. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/board_info.txt b/src/mainboard/asus/kfsn4-dre_k8/board_info.txt deleted file mode 100644 index 678373ad2c..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: server -ROM package: PLCC-32 -ROM protocol: LPC -ROM socketed: y -Flashrom support: y -Release year: 2007 diff --git a/src/mainboard/asus/kfsn4-dre_k8/bootblock.c b/src/mainboard/asus/kfsn4-dre_k8/bootblock.c deleted file mode 100644 index 454443f370..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/bootblock.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <pc80/mc146818rtc.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> - -#define GPIO_DEV PNP_DEV(0x2e, W83627THG_GPIO3) - -#define WINBOND_ENTRY_KEY 0x87 -#define WINBOND_EXIT_KEY 0xAA - -/* Enable configuration: pass entry key '0x87' into index port dev. */ -static void pnp_enter_conf_state(pnp_devfn_t dev) -{ - u16 port = dev >> 8; - outb(WINBOND_ENTRY_KEY, port); - outb(WINBOND_ENTRY_KEY, port); -} - -/* Disable configuration: pass exit key '0xAA' into index port dev. */ -static void pnp_exit_conf_state(pnp_devfn_t dev) -{ - u16 port = dev >> 8; - outb(WINBOND_EXIT_KEY, port); -} - -uint8_t bootblock_read_recovery_jumper(pnp_devfn_t dev) -{ - uint8_t recovery_enabled = 0; - - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 1); /* Enable GPIO3 */ - pnp_write_config(dev, 0xf0, 0xff); /* Set GPIO3 to input */ - recovery_enabled = !(pnp_read_config(dev, 0xf1) & 0x08); /* Read GP33 */ - pnp_exit_conf_state(dev); - - return recovery_enabled; -} - -void bootblock_mainboard_init(void) -{ - uint8_t recovery_enabled; - unsigned char addr; - unsigned char byte; - - recovery_enabled = bootblock_read_recovery_jumper(GPIO_DEV); - if (recovery_enabled) { -#if IS_ENABLED(CONFIG_USE_OPTION_TABLE) - /* Clear NVRAM checksum */ - for (addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { - cmos_write(0x0, addr); - } - - /* Set fallback boot */ - byte = cmos_read(RTC_BOOT_BYTE); - byte &= 0xfc; - cmos_write(byte, RTC_BOOT_BYTE); -#else - /* FIXME - * Figure out how to recover if the option table is not available - */ -#endif - } -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/cmos.default b/src/mainboard/asus/kfsn4-dre_k8/cmos.default deleted file mode 100644 index d3a8081d95..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/cmos.default +++ /dev/null @@ -1,12 +0,0 @@ -debug_level = Spew -multi_core = Enable -slow_cpu = off -hypertransport_speed_limit = Auto -max_mem_clock = DDR2-800 -ECC_memory = Enable -hw_scrubber = Enable -interleave_chip_selects = Enable -interleave_nodes = Disable -interleave_memory_channels = Enable -power_on_after_fail = Enable -boot_option = Fallback diff --git a/src/mainboard/asus/kfsn4-dre_k8/cmos.layout b/src/mainboard/asus/kfsn4-dre_k8/cmos.layout deleted file mode 100644 index 86b95a94e4..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -393 3 r 0 unused -396 1 e 1 hw_scrubber -397 1 e 1 interleave_chip_selects -398 1 e 1 interleave_nodes -399 1 e 1 interleave_memory_channels -408 2 e 8 max_mem_clock -410 1 e 2 multi_core -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -446 1 e 1 power_on_after_fail -456 1 e 1 ECC_memory -458 4 e 11 hypertransport_speed_limit -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 0 Emergency -6 1 Alert -6 2 Critical -6 3 Error -6 4 Warning -6 5 Notice -6 6 Information -6 7 Debug -6 8 Spew -8 0 DDR2-800 -8 1 DDR2-667 -8 2 DDR2-533 -8 3 DDR2-400 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% -10 0 Disabled -10 1 40ns -10 2 80ns -10 3 160ns -10 4 320ns -10 5 640ns -10 6 1.28us -10 7 2.56us -10 8 5.12us -10 9 10.2us -10 10 20.5us -10 11 41us -10 12 81.9us -10 13 163.8us -10 14 327.7us -10 15 655.4us -10 16 1.31ms -10 17 2.62ms -10 18 5.24ms -10 19 10.49ms -10 20 20.97ms -10 21 42ms -10 22 84ms -11 0 Auto -11 1 2.6GHz -11 2 2.4GHz -11 3 2.2GHz -11 4 2.0GHz -11 5 1.8GHz -11 6 1.6GHz -11 7 1.4GHz -11 8 1.2GHz -11 9 1.0GHz -11 10 800MHz -11 11 600MHz -11 12 500MHz -11 13 400MHz -11 14 300MHz -11 15 200MHz - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/kfsn4-dre_k8/devicetree.cb b/src/mainboard/asus/kfsn4-dre_k8/devicetree.cb deleted file mode 100644 index a02b234d04..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/devicetree.cb +++ /dev/null @@ -1,197 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0x8162 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - register "maximum_memory_capacity" = "0x1000000000" # 64GB - device pci 18.0 on end # Link 0 == LDT 0 - device pci 18.0 on # Link 1 == LDT 1 [SB on link 1] - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 2e.0 on # Floppy - # Set up interface resources - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off end # Parallel port - device pnp 2e.2 on # Com1 - # Set up interface resources - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - # Set up interface resources - io 0x60 = 0x2f8 - irq 0x70 = 3 - # Select correct package I/O pins - io 0xf1 = 0x04 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - # Set up interface resources - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.7 off end # Game port, MIDI, GPIO 1 & 5 - device pnp 2e.8 off end # GPIO 2 - device pnp 2e.9 on end # GPIO 3, GPIO 4 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - # Set up interface resources - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM n-0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM n-0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM n-0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM n-0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM n-1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM n-1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM n-1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM n-1-1-1 - device i2c 57 on end - end - chip drivers/i2c/w83793 - register "mfc" = "0x29" # Enable FANIN1/FANIN12, FANIN9/FANIN10, and FANIN8/FANCTRL8 inputs - register "fanin" = "0x7f" # Enable monitoring of FANIN6 - FANIN12 - register "fanin_sel" = "0x0f" # Connect FANIN9 - FANIN12 to pins 37 - 40 - register "peci_agent_conf" = "0x33" # Set Intel CPU PECI agent domain (not used by AMD but may affect chip operation) - register "tcase0" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tcase1" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tcase2" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tcase3" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tr_enable" = "0x03" # Enable montoring of TR1 and TR2 - register "td_mode_select" = "0x05" # Use internal temperature sensors and disable unconnected TD3/TD4 - register "td1_critical_temperature" = "85" # Set TD1 (CPU0) critical temperature to 85°C - register "td1_critical_hysteresis" = "80" # Set TD1 (CPU0) critical hysteresis temperature to 80°C - register "td1_warning_temperature" = "70" # Set TD1 (CPU0) warning temperature to 70°C - register "td1_warning_hysteresis" = "65" # Set TD1 (CPU0) warning hysteresis temperature to 65°C - register "td2_critical_temperature" = "85" # Set TD2 (CPU1) critical temperature to 85°C - register "td2_critical_hysteresis" = "80" # Set TD2 (CPU1) critical hysteresis temperature to 80°C - register "td2_warning_temperature" = "70" # Set TD2 (CPU1) warning temperature to 70°C - register "td2_warning_hysteresis" = "65" # Set TD2 (CPU1) warning hysteresis temperature to 65°C - register "tr1_critical_temperature" = "60" # Set TR1 (mainboard) critical temperature to 60°C - register "tr1_critical_hysteresis" = "55" # Set TR1 (mainboard) critical hysteresis temperature to 55°C - register "tr1_warning_temperature" = "50" # Set TR1 (mainboard) warning temperature to 50°C - register "tr1_warning_hysteresis" = "45" # Set TR1 (mainboard) warning hysteresis temperature to 45°C - register "critical_temperature" = "80" # Set critical temperature to 80°C - register "fanctrl1" = "0x48" # Set Fan 4 and Fan 7 to output buffer mode, all others to open drain - register "fanctrl2" = "0x01" # Set Fan 4 to Fan 7 to output buffer mode, Fan 1 to DC mode - register "first_valid_fan_number" = "2" # Fan 1/Fan 2 controls and sensors are not connected to anything - register "td1_fan_select" = "0x00" # All fans to manual mode (no dependence on TD1) - register "td2_fan_select" = "0x00" # All fans to manual mode (no dependence on TD2) - register "td3_fan_select" = "0x00" # All fans to manual mode (no dependence on TD3) - register "td4_fan_select" = "0x00" # All fans to manual mode (no dependence on TD4) - register "tr1_fan_select" = "0x00" # All fans to manual mode (no dependence on TR1) - register "tr2_fan_select" = "0x00" # All fans to manual mode (no dependence on TR2) - register "fan1_nonstop" = "7" # Set Fan 1 minimum speed - register "fan2_nonstop" = "7" # Set Fan 2 minimum speed - register "fan3_nonstop" = "7" # Set Fan 3 minimum speed - register "fan4_nonstop" = "7" # Set Fan 4 minimum speed - register "fan5_nonstop" = "7" # Set Fan 5 minimum speed - register "fan6_nonstop" = "7" # Set Fan 6 minimum speed - register "fan7_nonstop" = "7" # Set Fan 7 minimum speed - register "fan8_nonstop" = "7" # Set Fan 8 minimum speed - register "default_speed" = "100" # All fans to full speed on power up - register "fan1_duty" = "100" # Fan 1 to full speed - register "fan2_duty" = "100" # Fan 2 to full speed - register "fan3_duty" = "100" # Fan 3 to full speed - register "fan4_duty" = "100" # Fan 4 to full speed - register "fan5_duty" = "100" # Fan 5 to full speed - register "fan6_duty" = "100" # Fan 6 to full speed - register "fan7_duty" = "100" # Fan 7 to full speed - register "fan8_duty" = "100" # Fan 8 to full speed - register "vcorea_high_limit_mv" = "1500" # VCOREA (Node 0) high limit to 1.5V - register "vcorea_low_limit_mv" = "900" # VCOREA (Node 0) low limit to 0.9V - register "vcoreb_high_limit_mv" = "1500" # VCOREB (Node 1) high limit to 1.5V - register "vcoreb_low_limit_mv" = "900" # VCOREB (Node 1) low limit to 0.9V - register "vtt_high_limit_mv" = "1250" # VTT (HT link voltage) high limit to 1.25V - register "vtt_low_limit_mv" = "1150" # VTT (HT link voltage) low limit to 1.15V - register "vsen1_high_limit_mv" = "1900" # VSEN1 (Node 0 RAM voltage) high limit to 1.9V - register "vsen1_low_limit_mv" = "1700" # VSEN1 (Node 0 RAM voltage) low limit to 1.7V - register "vsen2_high_limit_mv" = "1900" # VSEN2 (Node 1 RAM voltage) high limit to 1.9V - register "vsen2_low_limit_mv" = "1700" # VSEN2 (Node 1 RAM voltage) low limit to 1.7V - register "vsen3_high_limit_mv" = "3500" # VSEN3 (+3.3V) high limit to 3.5V - register "vsen3_low_limit_mv" = "3100" # VSEN3 (+3.3V) low limit to 3.1V - register "vsen4_high_limit_mv" = "1070" # VSEN4 (+12V, scaling factor ~12.15) high limit to 13V - register "vsen4_low_limit_mv" = "905" # VSEN4 (+12V, scaling factor ~12.15) low limit to 11V - register "vdd_high_limit_mv" = "5200" # 5VDD high limit to 5.2V - register "vdd_low_limit_mv" = "4800" # 5VDD low limit to 4.8V - register "vsb_high_limit_mv" = "5200" # 5VSB high limit to 5.2V - register "vsb_low_limit_mv" = "4800" # 5VSB low limit to 4.8V - register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V - register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V - device i2c 0x2f on end - end - end - device pci 1.1 on end # SM 1 - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # AC'97 Audio (N/A) - device pci 4.1 off end # AC'97 Modem (N/A) - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 0 - device pci 8.0 on end # SATA 1 - device pci 9.0 on # Bridge - device pci 4.0 on end # VGA - end - device pci a.0 off end - device pci b.0 on # Bridge - device pci 0.0 on end # NIC A - end - device pci c.0 on # Bridge - device pci 0.0 on end # LSI SAS - end - device pci d.0 on # Bridge - device pci 0.0 on end # NIC B - end - device pci e.0 on # Bridge - # Slot # PCI E 0 - end - device pci f.0 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 2 == LDT 2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end # Link 0 == LDT 0 - device pci 19.0 on end # Link 1 == LDT 1 - device pci 19.0 on end # Link 2 == LDT 2 - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end -end diff --git a/src/mainboard/asus/kfsn4-dre_k8/dsdt.asl b/src/mainboard/asus/kfsn4-dre_k8/dsdt.asl deleted file mode 100644 index ce01a49db8..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/dsdt.asl +++ /dev/null @@ -1,947 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * Copyright (C) 2005 - 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * WARNING: Sleep/Wake is a work in progress and is still somewhat flaky! - * Everything else does to the best of my knowledge... (T.P. 01/26/2015) - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -/* - * PCI link routing templates taken from ck804.asl and modified for this board - */ - -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASUS ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00000001 /* OEM Revision */ - ) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PICM, One) /* Assume APIC */ - - /* HPET control */ - Name (SHPB, 0xFED00000) - Name (SHPL, 0x1000) - - /* Define power states */ - Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) /* Normal operation */ - Name (_S1, Package () { 0x01, 0x00, 0x00, 0x00 }) /* Standby */ - /* Name (_S3, Package () { 0x05, 0x00, 0x00, 0x00 }) */ /* Not supported by hardware */ - /* Name (_S4, Package () { 0x06, 0x00, 0x00, 0x00 }) */ - Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) /* Hard power off */ - - /* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - Method (_PIC, 1, Serialized) { - Store (Arg0, PICM) - } - - /* _PR CPU0 is dynamically supplied by SSDT */ - /* CPU objects and _PSS entries are dynamically supplied by SSDT */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* VGA controller PME# */ - Method(_L00) { - /* Level-Triggered GPE */ - Notify(\_SB.PCI0.VGAC, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Keyboard controller PME# */ - Method(_L03) { - /* Level-Triggered GPE */ - Notify(\_SB.PCI0.LPC.KBD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.LPC.MOU, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* USB2 PME# */ - Method(_L05) { - /* Level-Triggered GPE */ - Notify (\_SB.PCI0.USB2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Slot PME# */ - Method(_L0B) { - /* Level-Triggered GPE */ - Notify (\_SB.PCI0.PCIE.SLT1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PCI0.LSIC.SLT2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* USB0 PME# */ - Method(_L0D) { - /* Level-Triggered GPE */ - Notify (\_SB.PCI0.USB0, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Keyboard controller PME# */ - Method(_L10) { - /* Level-Triggered GPE */ - Notify(\_SB.PCI0.LPC.KBD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.LPC.MOU, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* PCIe PME# */ - Method(_L11) { - /* Level-Triggered GPE */ - Notify (\_SB.PCI0.NICB, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PCI0.PCIE, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PCI0.NICA, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PCI0.LSIC, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify (\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - } /* End Scope GPE */ - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device (CK804) */ - Device (PCI0) - { - /* BUS0 root bus */ - - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180001) - Name (_UID, 0x00) - - Name (HCIN, 0x00) // HC1 - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - /* Operating System Capabilities Method */ - Method(_OSC,4) - { - /* Let OS control everything */ - Return (Arg3) - } - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - External (CBST) - - /* PCI Routing Tables */ - Name (PR00, Package () { - /* PIC */ - /* ISA Bridge */ - Package (0x04) { 0x0001FFFF, 0x00, LKSM, 0x00 }, - - /* USB */ - Package (0x04) { 0x0002FFFF, 0x00, LUB0, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, LUB2, 0x00 }, - - /* SATA 0 */ - Package (0x04) { 0x0007FFFF, 0x00, LSA0, 0x00 }, - - /* SATA 1 */ - Package (0x04) { 0x0008FFFF, 0x00, LSA1, 0x00 }, - - /* NIC A (Bridge) */ - Package (0x04) { 0x000BFFFF, 0x00, LNKB, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x01, LNKC, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x02, LNKD, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x03, LNKA, 0x00 }, - - /* NIC B (Bridge) */ - Package (0x04) { 0x000CFFFF, 0x00, LNKA, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x01, LNKB, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x02, LNKC, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x03, LNKD, 0x00 }, - - /* LSI SAS Controller (Bridge) */ - Package (0x04) { 0x000DFFFF, 0x00, LNKD, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x01, LNKA, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x02, LNKB, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x03, LNKC, 0x00 }, - - /* PCI-E Slot (Bridge) */ - Package (0x04) { 0x000EFFFF, 0x00, LNKC, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x01, LNKD, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x02, LNKA, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x03, LNKB, 0x00 }, - }) - - Name (AR00, Package () { - /* APIC */ - /* ISA Bridge */ - Package (0x04) { 0x0001FFFF, 0x00, LKSM, 0x00 }, - - /* USB */ - Package (0x04) { 0x0002FFFF, 0x00, LUB0, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, LUB2, 0x00 }, - - /* SATA 0 */ - Package (0x04) { 0x0007FFFF, 0x00, LSA0, 0x00 }, - - /* SATA 1 */ - Package (0x04) { 0x0008FFFF, 0x00, LSA1, 0x00 }, - - /* NIC A (Bridge) */ - Package (0x04) { 0x000BFFFF, 0x00, LNIB, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x01, LNIC, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x02, LNND, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x03, LNIA, 0x00 }, - - /* NIC B (Bridge) */ - Package (0x04) { 0x000CFFFF, 0x00, LNIA, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x01, LNIB, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x02, LNIC, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x03, LNND, 0x00 }, - - /* LSI SAS Controller (Bridge) */ - Package (0x04) { 0x000DFFFF, 0x00, LNND, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x01, LNIA, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x02, LNIB, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x03, LNIC, 0x00 }, - - /* PCI-E Slot (Bridge) */ - Package (0x04) { 0x000EFFFF, 0x00, LNIC, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x01, LNND, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x02, LNIA, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x03, LNIB, 0x00 }, - }) - - Name (PR01, Package () { - /* PIC */ - Package (0x04) { 0x0004FFFF, 0x00, LNKA, 0x00 }, - }) - - Name (AR01, Package () { - /* APIC */ - Package (0x04) { 0x0004FFFF, 0x00, LNIA, 0x00 }, - }) - - Name (PR02, Package () { - /* PIC */ - Package (0x04) { 0xFFFF, 0x00, LNKB, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNKC, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNKD, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNKA, 0x00 }, - }) - - Name (AR02, Package () { - /* APIC */ - Package (0x04) { 0xFFFF, 0x00, LNIB, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNIC, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNND, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNIA, 0x00 }, - }) - - Name (PR03, Package () { - /* PIC */ - Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 }, - }) - - Name (AR03, Package () { - /* APIC */ - Package (0x04) { 0xFFFF, 0x00, LNIA, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNIB, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNIC, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNND, 0x00 }, - }) - - Name (PR04, Package () { - /* PIC */ - Package (0x04) { 0xFFFF, 0x00, LNKD, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNKA, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNKB, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNKC, 0x00 }, - }) - - Name (AR04, Package () { - /* APIC */ - Package (0x04) { 0xFFFF, 0x00, LNND, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNIA, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNIB, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNIC, 0x00 }, - }) - - Name (PR05, Package () { - /* PIC */ - Package (0x04) { 0xFFFF, 0x00, LNKC, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNKD, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNKA, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNKB, 0x00 }, - }) - - Name (AR05, Package () { - /* APIC */ - Package (0x04) { 0xFFFF, 0x00, LNIC, 0x00 }, - Package (0x04) { 0xFFFF, 0x01, LNND, 0x00 }, - Package (0x04) { 0xFFFF, 0x02, LNIA, 0x00 }, - Package (0x04) { 0xFFFF, 0x03, LNIB, 0x00 }, - }) - - /* PCI Resource Tables */ - - Name (RSIA, ResourceTemplate () { - /* PIC */ - IRQ (Level, ActiveLow, Shared, ) {8} - }) - - Name (RSMA, ResourceTemplate () { - /* APIC */ - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) {16} - }) - - Name (RSIB, ResourceTemplate () { - /* PIC */ - IRQ (Level, ActiveLow, Shared, ) {1} - }) - - Name (RSMB, ResourceTemplate () { - /* APIC */ - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) {17} - }) - - Name (RSIC, ResourceTemplate () { - /* PIC */ - IRQ (Level, ActiveLow, Shared, ) {2} - }) - - Name (RSMC, ResourceTemplate () { - /* APIC */ - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) {18} - }) - - Name (RSND, ResourceTemplate () { - /* PIC */ - IRQ (Level, ActiveLow, Shared, ) {13} - }) - - Name (RSMD, ResourceTemplate () { - /* APIC */ - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) {19} - }) - - Name (RSS2, ResourceTemplate () - { - /* PIC */ - IRQ (Level, ActiveLow, Shared, ) - {3, 4, 5, 7, 9, 10, 11, 12, 14, 15} - }) - - Name (RSA1, ResourceTemplate () - { - /* APIC */ - IRQ (Level, ActiveLow, Shared, ) - {3, 4, 5, 6, 7, 10, 11, 12, 14, 15} - }) - - Method (_CRS, 0, Serialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods below use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - \_SB.GXXX(node, link) - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - -#include "southbridge/nvidia/ck804/acpi/ck804.asl" - - /* PCI Routing Table Access */ - Method (_PRT, 0, NotSerialized) { - If (PICM) { - Return (AR00) - } Else { - Return (PR00) - } - } - - /* USB0 */ - Device (LUB0) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x05) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTQ) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTQ) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (PRSC) - } Else { - Return (RSA1) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSC(\_SB.PCI0.LPCB.INTQ)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTQ)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSC(Arg0), \_SB.PCI0.LPCB.INTQ) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTQ) - } - } - } - - /* USB2 */ - Device (LUB2) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x07) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTL) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTL) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (PRSC) - } Else { - Return (RSA1) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSC(\_SB.PCI0.LPCB.INTL)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTL)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSC(Arg0), \_SB.PCI0.LPCB.INTL) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTL) - } - } - } - - /* ISA Bridge */ - Device (LKSM) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x0C) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTK) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTK) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (RSA1) - } Else { - Return (RSS2) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSB(\_SB.PCI0.LPCB.INTK)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTK)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSB(Arg0), \_SB.PCI0.LPCB.INTK) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTK) - } - } - } - - /* Bridge device link (NIC A) */ - Device (LNIA) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x10) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTA) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTA) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (RSMA) - } Else { - Return (RSIA) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSB(\_SB.PCI0.LPCB.INTA)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTA)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSB(Arg0), \_SB.PCI0.LPCB.INTA) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTA) - } - } - } - - /* Bridge device link (NIC B) */ - Device (LNIB) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x11) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTB) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTB) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (RSMB) - } Else { - Return (RSIB) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSB(\_SB.PCI0.LPCB.INTB)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTB)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSB(Arg0), \_SB.PCI0.LPCB.INTB) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTB) - } - } - } - - /* Bridge device link */ - Device (LNIC) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x12) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTC) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTC) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (RSMC) - } Else { - Return (RSIC) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSB(\_SB.PCI0.LPCB.INTC)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTC)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSB(Arg0), \_SB.PCI0.LPCB.INTC) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTC) - } - } - } - - /* Bridge device link */ - Device (LNND) - { - Name (_HID, EisaId ("PNP0C0F")) // _HID: Hardware ID - Name (_UID, 0x13) // _UID: Unique ID - - Method (_STA, 0, Serialized) { - If (\_SB.PCI0.LPCB.INTD) { - Return (0xb) - } Else { - Return (0x9) - } - } - Method (_DIS, 0, Serialized) { - Store (0, \_SB.PCI0.LPCB.INTD) - } - Method (_PRS, 0, Serialized) { - If (PICM) { - Return (RSMD) - } Else { - Return (RSND) - } - } - Method (_CRS, 0, Serialized) { - If (PICM) { - Return (CRSB(\_SB.PCI0.LPCB.INTD)) - } Else { - Return (CRSA(\_SB.PCI0.LPCB.INTD)) - } - } - Method (_SRS, 1, Serialized) { - If (PICM) { - Store (SRSB(Arg0), \_SB.PCI0.LPCB.INTD) - } Else { - Store (SRSA(Arg0), \_SB.PCI0.LPCB.INTD) - } - } - } - - /* 0:02.0 CK804 USB 0 */ - Device (USB0) - { - Name (_ADR, 0x00020000) // _ADR: Address - Name(_PRW, Package () {0x0D, 0x04}) // Wake from S1-S4 - } - - /* 0:02.0 CK804 USB 2 */ - Device (USB2) - { - Name (_ADR, 0x00020001) // _ADR: Address - Name(_PRW, Package () {0x05, 0x04}) // Wake from S1-S4 - } - - /* 1:04.0 VGA Controller */ - Device (VGAC) - { - Name (_ADR, 0x00090000) // _ADR: Address - Name(_PRW, Package () {0x00, 0x04}) // Wake from S1-S4 - Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table - { - If (PICM) { - Return (AR01) - } Else { - Return (PR01) - } - } - } - - /* 2:00.0 PCIe NIC A */ - Device (NICA) - { - Name (_ADR, 0x000B0000) // _ADR: Address - Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4 - Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table - { - If (PICM) { - Return (AR02) - } Else { - Return (PR02) - } - } - Device (BDC1) - { - Name (_ADR, Zero) // _ADR: Address - } - } - - /* 3:00.0 PCIe NIC B */ - Device (NICB) - { - Name (_ADR, 0x000C0000) // _ADR: Address - Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4 - Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table - { - If (PICM) { - Return (AR03) - } Else { - Return (PR03) - } - } - Device (BDC2) - { - Name (_ADR, Zero) // _ADR: Address - } - } - - /* 4:00.0 PCIe LSI SAS Controller */ - Device (LSIC) - { - Name (_ADR, 0x000D0000) // _ADR: Address - Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4 - Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table - { - If (PICM) { - Return (AR04) - } Else { - Return (PR04) - } - } - - Device (SLT2) - { - Name (_ADR, 0xFFFF) // _ADR: Address - Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4 - } - } - - /* 5:00.0 PCIe x16 */ - Device (PCIE) - { - Name (_ADR, 0x000E0000) // _ADR: Address - Name(_PRW, Package () {0x11, 0x04}) // Wake from S1-S4 - Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table - { - If (PICM) { - Return (AR05) - } Else { - Return (PR05) - } - } - Device (SLT1) - { - Name (_ADR, 0xFFFF) // _ADR: Address - Name(_PRW, Package () {0x0B, 0x04}) // Wake from S1-S4 - } - } - - Device (LPC) { - Name (_HID, EisaId ("PNP0A05")) - Name (_ADR, 0x00010000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CID, EisaId ("PNP030B")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, Serialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F03")) - Name (_CID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, Serialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - - /* UART 1 */ - Device (URT1) - { - Name (_HID, EisaId ("PNP0501")) // "PNP0501" for UART - Name(_PRW, Package () {0x03, 0x04}) // Wake from S1-S4 - Method (_STA, 0, NotSerialized) - { - Return (0x0f) // Always enable - } - Name (_PRS, ResourceTemplate() { - StartDependentFn(0, 1) { - IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8) - IRQNoFlags() { 4 } - } EndDependentFn() - }) - Method (_CRS, 0) - { - Return(ResourceTemplate() { - IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8) - IRQNoFlags() { 4 } - }) - } - } - - /* UART 2 */ - Device (URT2) - { - Name (_HID, EisaId ("PNP0501")) // "PNP0501" for UART - Name(_PRW, Package () {0x03, 0x04}) // Wake from S1-S4 - Method (_STA, 0, NotSerialized) - { - Return (0x0f) // Always enable - } - Name (_PRS, ResourceTemplate() { - StartDependentFn(0, 1) { - IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8) - IRQNoFlags() { 3 } - } EndDependentFn() - }) - Method (_CRS, 0) - { - Return(ResourceTemplate() { - IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8) - IRQNoFlags() { 3 } - }) - } - } - - /* Floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, Serialized) - { - Name (BUF0, ResourceTemplate () { - FixedIO (0x03F0, 0x08) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - Device (HPET) - { - Name (_HID, EisaId ("PNP0103")) - Name (CRS, ResourceTemplate () - { - Memory32Fixed (ReadOnly, - 0x00000000, - 0x00001000, - _Y02) - IRQNoFlags () {0} - IRQNoFlags () {8} - }) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._BAS, HPT1) - CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._LEN, HPT2) - Store (SHPB, HPT1) - Store (SHPL, HPT2) - Return (CRS) - } - - } - } - } - - Device (PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } - -#include "acpi/pm_ctrl.asl" - -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c b/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c deleted file mode 100644 index d527751eeb..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <stdlib.h> -#include <cpu/amd/amdk8_sysconf.h> - -/* - * Global variables for MB layouts and these will be shared by irqtable, - * mptable and acpi_tables. - */ -/* busnum is default */ -unsigned char bus_ck804[6]; -unsigned apicid_ck804; - -/* Here you only need to set value in pci1234 for HT-IO that could be -installed or not You may need to preset pci1234 for HTIO board, please -refer to src/northbridge/amd/amdk8/get_pci1234.c for detail */ -static u32 pci1234x[] = { - 0x0000ff0, 0x0000ff0, 0x0000ff0, -}; - - -/* HT Chain device num, actually it is unit id base of every ht device -in chain, assume every chain only have 4 ht device at most */ - -static unsigned hcdnx[] = { - 0x20202020, 0x20202020, 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base, sbdn; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 6; i++) - bus_ck804[i] = 0; - - /* CK804 */ - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x09, 0)); - if (dev) { - bus_ck804[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804[2]++; - } else { - printk - (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x09); - bus_ck804[1] = 2; - bus_ck804[2] = 3; - } - - for (i = 2; i < 6; i++) { - dev = dev_find_slot(bus_ck804[0], - PCI_DEVFN(sbdn + 0x0b + i - 2, 0)); - if (dev) { - bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804[0], sbdn + 0x0b + i - 2); - } - } - - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) { - apicid_base = get_apicid_base(1); - printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS == 1: apicid_base: %08x\n", apicid_base); - } else { - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS == 0: apicid_base: %08x\n", apicid_base); - } - apicid_ck804 = apicid_base + 0; -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/irq_tables.c b/src/mainboard/asus/kfsn4-dre_k8/irq_tables.c deleted file mode 100644 index d06980c773..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/irq_tables.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// WARNING -// These tables are INVALID for this mainboard! -// The ACPI tables are correct; a backport to these PIR tables is needed... - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_isa; -extern unsigned char bus_ck804[6]; - - -/** - * Add one line to IRQ table. - */ -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -/** - * Create the IRQ routing table. - * Values are derived from getpir generated code. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num, sbdn; - uint8_t *v, sum = 0; - int i; - - /* get_bus_conf() will find out all bus num and APIC that share with - * mptable.c and mptable.c. - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000. */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_ck804[0]; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - pirq->exclusive_irqs = 0x828; - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* Slot1 PCIE 16x */ - write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, - 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); - pirq_info++; - slot_num++; - - - /* Slot2 PCIE 1x */ - write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); - pirq_info++; - slot_num++; - - /* Slot3 PCIE 1x */ - write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); - pirq_info++; - slot_num++; - - /* Slot4 PCIE 4x */ - write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, 7, 0); - pirq_info++; - slot_num++; - - /* Slot5 - Slot7 PCI */ - for (i = 0; i < 3; i++) { - write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, - ((i + 0) % 4) + 1, 0xdeb8, - ((i + 1) % 4) + 1, 0xdeb8, - ((i + 2) % 4) + 1, 0xdeb8, - ((i + 3) % 4) + 1, 0xdeb8, i, 0); - pirq_info++; - slot_num++; - } - - /* PCI bridge */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); - pirq_info++; - slot_num++; - - /* SMBus */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* USB */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* SATA */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - /* SATA */ - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/mptable.c b/src/mainboard/asus/kfsn4-dre_k8/mptable.c deleted file mode 100644 index efa583c47f..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/mptable.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// WARNING -// These tables are INCOMPLETE for this mainboard! -// The ACPI tables are correct; a backport to these MP tables is needed... - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; -extern unsigned apicid_ck804; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - struct resource *res; - - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, - res2mmio(res, 0, 0)); - } - - /* Initialize interrupt mapping. */ - - /* - LPC bridge PCI config registers: - - 0x7c:0x0000ffff - - bitmap of masked pci irqs? - - PIRQ[ABCD] possibly? - - 0x7c:0x00f00000 - - sata at f8 - port 1 - - 0x7c:0x0f000000 - - sata at f7 - port 1 - - 0x80:0xf0000000 - - sata at f7 - port 0 - - 0x80:0x0f000000 - - sata at f8 - port 0 - - 0x80:0x0000f000 - - EHCI - - 0x84:0x00000f00 - - NIC - - 0x84:0x0000000f - - OHCI - - known values of nibbles: - - 0 - unrouted? - 1 - irq 23 - 8 - irq 20 - c - irq 12 - d - irq 21 - e - irq 14 - f - irq 15 - */ - - // Enable interrupts for commonly used devices (USB, SATA, etc.) - pci_write_config32(dev, 0x7c, 0x0d800018); - pci_write_config32(dev, 0x80, 0xd8002009); - pci_write_config32(dev, 0x84, 0x00000001); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0); - - // Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 1) << 2) | 1, apicid_ck804, - 0xa); - - // Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 2) << 2) | 0, apicid_ck804, - 0x15); - - // Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 2) << 2) | 1, apicid_ck804, - 0x14); - - // Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 7) << 2) | 0, apicid_ck804, - 0x17); - - // Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, - bus_ck804[0], ((sbdn + 8) << 2) | 0, apicid_ck804, - 0x16); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_ck804[0]); - - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/resourcemap.c b/src/mainboard/asus/kfsn4-dre_k8/resourcemap.c deleted file mode 100644 index cfbade68f2..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [31:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00000000, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00000000, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00fff010, /* link 1 of CPU 0 --> Nvidia CK 804 */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independent of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001013, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x05000103, /* link 1 of CPU 0 --> Nvidia CK 804 */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/romstage.c b/src/mainboard/asus/kfsn4-dre_k8/romstage.c deleted file mode 100644 index a404b06ad3..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/romstage.c +++ /dev/null @@ -1,362 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <timestamp.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/ck804/early_smbus.h" -#include <reset.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <cbmem.h> -#include <delay.h> - -#include <cpu/amd/mtrr.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+33, ~(0x0f),(0x04 | 0x01), /* -ENOINFO Proprietary BIOS sets this register; "When in Rome..."*/ - -#include <southbridge/nvidia/ck804/early_setup_ss.h> -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include <cpu/amd/microcode.h> - -#define GPIO3_DEV PNP_DEV(0x2e, W83627THG_GPIO3) - -/** - * @brief Get SouthBridge device number - * @param[in] bus target bus number - * @return southbridge device number - */ -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_CK804_PRO), bus); - return (dev >> 15) & 0x1f; -} - -/* - * ASUS KFSN4-DRE specific SPD enable/disable magic. - * - * Setting CK804 GPIO43 and GPIO44 to 0 and 0 respectively will make the - * board DIMMs accessible at SMBus/SPD offsets 0x50-0x53. Per default the SPD - * offsets 0x50-0x53 are _not_ readable (all SPD reads will return 0xff) which - * will make RAM init fail. - * - * Disable SPD access after RAM init to allow access to standard SMBus/I2C offsets - * which is required e.g. by lm-sensors. - */ - -#define CK804_BOARD_BOOT_BASE_UNIT_UID 1 - -static const unsigned int ctrl_conf_enable_spd_node0[] = { - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+42, ~(0x0f),(0x04 | 0x00),/* W2,GPIO43, U6 input S0*/ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+43, ~(0x0f),(0x04 | 0x00),/* W3,GPIO44, U6 input S1*/ -}; - -static const unsigned int ctrl_conf_enable_spd_node1[] = { - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+42, ~(0x0f),(0x04 | 0x00),/* W2,GPIO43, U6 input S0*/ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+43, ~(0x0f),(0x04 | 0x01),/* W3,GPIO44, U6 input S1*/ -}; - -static const unsigned int ctrl_conf_disable_spd[] = { - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+42, ~(0x0f),(0x04 | 0x01),/* W2,GPIO43, U6 input S0*/ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+43, ~(0x0f),(0x04 | 0x00),/* W3,GPIO44, U6 input S1*/ -}; - -static const unsigned int ctrl_conf_fix_pci_numbering[] = { - RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x44), ~(0x00010000), 0x00000000, /* Force CK804 to start its internal device numbering (Base Unit ID) at 0 instead of the power-on default of 1 */ -}; - -static const unsigned int ctrl_conf_enable_msi_mapping[] = { - RES_PCI_IO, PCI_ADDR(0, 0, 0, 0xe0), ~(0x00000000), 0x00010000, /* Enable MSI mapping on host bridge -- without this Linux cannot use the network device MSI interrupts! */ -}; - -static void ck804_control(const unsigned int* values, u32 size, uint8_t bus_unit_id) -{ - unsigned busn[4], io_base[4]; - int i, ck804_num = 0; - - for (i = 0; i < 4; i++) { - u32 id; - pci_devfn_t dev; - if (i == 0) /* SB chain */ - dev = PCI_DEV(i * 0x40, bus_unit_id, 0); - else - dev = 0; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (id == 0x005e10de) { - busn[ck804_num] = i * 0x40; - io_base[ck804_num] = i * 0x4000; - ck804_num++; - } - } - - if (ck804_num < 1) - printk(BIOS_WARNING, "CK804 not found at device base unit id %02x!\n", bus_unit_id); - - ck804_early_set_port(ck804_num, busn, io_base); - - setup_resource_map_x_offset(values, - size, - PCI_DEV(0, bus_unit_id, 0), io_base[0]); - - ck804_early_clear_port(ck804_num, busn, io_base); -} - -static void sio_setup(void) -{ - u32 dword; - u8 byte; - - /* Subject decoding */ - byte = pci_read_config8(PCI_DEV(0, CK804_BOARD_BOOT_BASE_UNIT_UID + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_BOARD_BOOT_BASE_UNIT_UID + 1, 0), 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_BOARD_BOOT_BASE_UNIT_UID + 1, 0), 0xa0); - /* Serial 0, Serial 1 */ - dword |= (1 << 0) | (1 << 1); - pci_write_config32(PCI_DEV(0, CK804_BOARD_BOOT_BASE_UNIT_UID + 1, 0), 0xa0, dword); -} - -static const uint16_t spd_addr[] = { - // Node 0 - RC00 | DIMM0, RC00 | DIMM2, RC00 | DIMM4, RC00 | DIMM6, RC00 | DIMM1, RC00 | DIMM3, RC00 | DIMM5, RC00 | DIMM7, - // Node 1 - RC01 | DIMM0, RC01 | DIMM2, RC01 | DIMM4, RC01 | DIMM6, RC01 | DIMM1, RC01 | DIMM3, RC01 | DIMM5, RC01 | DIMM7, -}; - -void activate_spd_rom(const struct mem_controller *ctrl) -{ - printk(BIOS_DEBUG, "activate_spd_rom() for node %02x\n", ctrl->node_id); - if (ctrl->node_id == 0) { - printk(BIOS_DEBUG, "enable_spd_node0()\n"); - ck804_control(ctrl_conf_enable_spd_node0, ARRAY_SIZE(ctrl_conf_enable_spd_node0), CK804_DEVN_BASE); - } - else if (ctrl->node_id == 1) { - printk(BIOS_DEBUG, "enable_spd_node1()\n"); - ck804_control(ctrl_conf_enable_spd_node1, ARRAY_SIZE(ctrl_conf_enable_spd_node1), CK804_DEVN_BASE); - } -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - - uint32_t bsp_apicid = 0; - uint32_t dword; - uint8_t needs_reset = 0; -#if IS_ENABLED(CONFIG_SET_FIDVID) - struct cpuid_result cpuid1; -#endif - - timestamp_init(timestamp_get()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - post_code(0x30); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - post_code(0x32); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - if (CONFIG_MAX_PHYSICAL_CPUS != 2) - printk(BIOS_WARNING, "CONFIG_MAX_PHYSICAL_CPUS is %d, but this is a dual socket board!\n", CONFIG_MAX_PHYSICAL_CPUS); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - dword = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", dword); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - post_code(0x33); - - setup_coherent_ht_domain(); - post_code(0x35); - - /* Wait for all base cores to start */ - wait_all_core0_started(); - post_code(0x36); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x37); - - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) { - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x38); - wait_all_other_cores_started(bsp_apicid); - post_code(0x39); - } - - ht_setup_chains_x(sysinfo); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - msr_t msr; - - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* Show final FID and VID */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } -#endif - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - printk(BIOS_DEBUG, "set_ck804_base_unit_id()\n"); - ck804_control(ctrl_conf_fix_pci_numbering, ARRAY_SIZE(ctrl_conf_fix_pci_numbering), CK804_BOARD_BOOT_BASE_UNIT_UID); - - post_code(0x3a); - - printk(BIOS_DEBUG, "optimize_link_coherent_ht()\n"); - needs_reset = optimize_link_coherent_ht(); - printk(BIOS_DEBUG, "optimize_link_incoherent_ht()\n"); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - printk(BIOS_DEBUG, "ck804_early_setup_x()\n"); - needs_reset |= ck804_early_setup_x(); - - /* FIDVID change will issue one LDTSTOP and the HT change will be effective too */ - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - post_code(0x3b); - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - post_code(0x3d); - - printk(BIOS_DEBUG, "enable_smbus()\n"); - enable_smbus(); - -#if 0 - /* FIXME - * After the AMD K10 code has been converted to use - * IS_ENABLED(CONFIG_DEBUG_SMBUS) uncomment this block - */ - if (IS_ENABLED(CONFIG_DEBUG_SMBUS)) { - dump_spd_registers(&cpu[0]); - dump_smbus_registers(); - } -#endif - - post_code(0x40); - - timestamp_add_now(TS_BEFORE_INITRAM); - printk(BIOS_DEBUG, "sdram_initialize()\n"); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - timestamp_add_now(TS_AFTER_INITRAM); - - cbmem_initialize_empty(); - post_code(0x41); - - printk(BIOS_DEBUG, "disable_spd()\n"); - ck804_control(ctrl_conf_disable_spd, ARRAY_SIZE(ctrl_conf_disable_spd), CK804_DEVN_BASE); - - printk(BIOS_DEBUG, "enable_msi_mapping()\n"); - ck804_control(ctrl_conf_enable_msi_mapping, ARRAY_SIZE(ctrl_conf_enable_msi_mapping), CK804_DEVN_BASE); - - /* Initialize GPIO */ - /* Access SuperIO GPI03 logical device */ - uint16_t port = GPIO3_DEV >> 8; - outb(0x87, port); - outb(0x87, port); - pnp_set_logical_device(GPIO3_DEV); - /* Set GP37 (power LED) to output */ - pnp_write_config(GPIO3_DEV, 0xf0, 0x7f); - /* Set GP37 (power LED) on */ - pnp_write_config(GPIO3_DEV, 0xf1, 0x80); - /* Set pin 64 multiplex to GP37 */ - uint8_t cr2c = pnp_read_config(GPIO3_DEV, 0x2c); - pnp_write_config(GPIO3_DEV, 0x2c, (cr2c & 0xf3) | 0x04); - /* Restore default SuperIO access */ - outb(0xaa, port); -} diff --git a/src/mainboard/asus/kfsn4-dre_k8/spd_notes.txt b/src/mainboard/asus/kfsn4-dre_k8/spd_notes.txt deleted file mode 100644 index 9287a5f75a..0000000000 --- a/src/mainboard/asus/kfsn4-dre_k8/spd_notes.txt +++ /dev/null @@ -1,69 +0,0 @@ -==================================================================================================== -SPD mux -==================================================================================================== - -DIMM_A1 SDA signal traced to U6 pin 1 -Destructive testing of failed board (removal of U7 northbridge!) yielded the following information: -U6 S0 <--> U7 W2 -U6 S1 <--> U7 W3 - -Proprietary BIOS enables the SPD during POST with: -S0: LOW -S1: LOW - -then temporarily switches to: -S0: LOW -S1: HIGH - -then switches to runtime mode with: -S0: HIGH -S1: LOW - -After probing with a custom GPIO-flipping tool under Linux the following GPIO mappings were found: -CK804 pin W2 <--> GPIO43 -CK804 pin W3 <--> GPIO44 - -==================================================================================================== -W83793 (U46) -==================================================================================================== - -Sensor mappings: -FRNT_FAN1: FAN3 -FRNT_FAN2: FAN4 -FRNT_FAN3: FAN5 -FRNT_FAN4: FAN6 -FRNT_FAN5: FAN9 -FRNT_FAN6: FAN10 -REAR_FAN1: FAN7 -REAR_FAN2: FAN8 -REAR_FAN3: FAN11 -REAR_FAN4: FAN12 - -==================================================================================================== -Other hardware -==================================================================================================== - -Power LED (-) is connected to U15 (SuperIO) pin 64 via U4 pins 5,6 and a small MOSFET -ID LED (-) is connected to a ??? via U4 pins 1,2,3,4 and U77 pins 5,6 -It appears that setting U15 (SuperIO) pin 88 LOW will override the ID LED and force it ON - -RECOVERY2 middle pin is connected to U15 (SuperIO) pin 89 -Normal is HIGH, recovery is LOW. - -PCIe slot WAKE# connects to U7 pin E23 (PCIE_WAKE#) - -CPU_WARN1 is driven by (???) via a simple buffer (U13 pin 10) -MEM_WARN1 is driven by U7 pin AD3 (CPUVDD_EN) via a simple buffer (U101 pin 3) - -U7 pin AK3 is disconnected (routed to unpopulated capacitor/resistor) -PU1 pin 37 (VDDPWRGD) drives U7 pin AJ4 (CPU_VLD) -A small MOSFET directly above another small MOSFET directly above the right-hand edge of the PCIe slot drives U7 pin AK5 (HT_VLD) - -When > Barcelona CPU installed on PCB rev 1.04G: -U7 pin AK4 (MEM_VLD): HIGH -PU1 pin 37: LOW -U7 pin AK5: LOW - -HyperTransport 1.2V supply appears to be generated by a linear regulator containing Q191 and downconverting the CK804 1.5V supply -The enable pin appears to be tied to AUX_PANEL pin 1 (+5VSB) via a resistor -Through two MOSFETs the HT supply enable pin is tied to U7 pin AE3 (HTVDD_EN) diff --git a/src/mainboard/asus/m2n-e/Kconfig b/src/mainboard/asus/m2n-e/Kconfig deleted file mode 100644 index 7cb903bb93..0000000000 --- a/src/mainboard/asus/m2n-e/Kconfig +++ /dev/null @@ -1,77 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -if BOARD_ASUS_M2N_E - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_ITE_IT8716F - select SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default asus/m2n-e - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "M2N-E" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -endif # BOARD_ASUS_M2N_E diff --git a/src/mainboard/asus/m2n-e/Kconfig.name b/src/mainboard/asus/m2n-e/Kconfig.name deleted file mode 100644 index e3cbc5da00..0000000000 --- a/src/mainboard/asus/m2n-e/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_M2N_E - bool "M2N-E" diff --git a/src/mainboard/asus/m2n-e/Makefile.inc b/src/mainboard/asus/m2n-e/Makefile.inc deleted file mode 100644 index 94559573a7..0000000000 --- a/src/mainboard/asus/m2n-e/Makefile.inc +++ /dev/null @@ -1,17 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ramstage-$(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) += fanctl.c diff --git a/src/mainboard/asus/m2n-e/board_info.txt b/src/mainboard/asus/m2n-e/board_info.txt deleted file mode 100644 index d7b04de6d1..0000000000 --- a/src/mainboard/asus/m2n-e/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2NE/ -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y -Release year: 2006 diff --git a/src/mainboard/asus/m2n-e/cmos.layout b/src/mainboard/asus/m2n-e/cmos.layout deleted file mode 100644 index 95b7de3a6e..0000000000 --- a/src/mainboard/asus/m2n-e/cmos.layout +++ /dev/null @@ -1,68 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m2n-e/devicetree.cb b/src/mainboard/asus/m2n-e/devicetree.cb deleted file mode 100644 index 5938684899..0000000000 --- a/src/mainboard/asus/m2n-e/devicetree.cb +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0x8239 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 (N/A) - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - io 0x62 = 0x000 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x000 - irq 0x70 = 0 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 # PS/2 mouse IRQ - end - device pnp 2e.7 off # GPIO - io 0x60 = 0x0000 # SMI# Normal Run Access - io 0x62 = 0x800 # Simple I/O - io 0x64 = 0x0000 # Serial Flash I/F - end - device pnp 2e.8 off # MIDI (N/A) - end - device pnp 2e.9 off # Game port (N/A) - end - device pnp 2e.a off # Consumer IR (N/A) - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # Azalia (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A) - device pci a.0 on end # PCI E 5 (PCIEX4) - device pci b.0 off end # PCI E 4 - device pci c.0 on end # PCI E 3 (PCIEX1_2) - device pci d.0 on end # PCI E 2 (PCIEX1_1) - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 (PCIEX16_1) - register "ide0_enable" = "1" # Primary IDE - register "ide1_enable" = "0" # Secondary IDE (N/A) - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/m2n-e/fanctl.c b/src/mainboard/asus/m2n-e/fanctl.c deleted file mode 100644 index 8fa7d82578..0000000000 --- a/src/mainboard/asus/m2n-e/fanctl.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * The ASUS M2N-E has 6 different fans, connected to two different chips: - * - ITE IT8716F: fan1 = CPU_FAN, fan2 = CHA_FAN1, fan3 = PWR_FAN1 - * - Analog Devices ADT7475: fan1 = CHA_FAN4, fan2 = CHA_FAN2, fan3 = CHA_FAN3 - */ - -#include <arch/io.h> -#include <stdlib.h> -#include <superio/ite/it8716f/it8716f.h> - -static void write_index(u16 port, u8 reg, u8 value) -{ - outb(reg, port); - outb(value, port + 1); -} - -static const struct { - u8 index; - u8 value; -} sequence[] = { - /* Enable startup of monitoring operations. */ - { 0x00, 0x11}, - /* Polarity active-high, PWM frequency 23.43KHz, activate fans 1-3. */ - { 0x14, 0xd7}, - /* Set the correct sensor types. TMPIN1: diode, TMPIN2/3: resistor. */ - { 0x51, 0x31}, - /* Fan1 (CPU_FAN) is software-controlled. */ - { 0x15, 0x7f}, - /* Fan2 (CHA_FAN1) is software-controlled. */ - { 0x16, 0x7f}, - /* Fan3 (PWR_FAN1) is software-controlled. */ - { 0x17, 0x7f}, - /* Enable fan1/2/3, select "on/off mode" for all of them. */ - { 0x13, 0x70}, -}; - -/* Called from src/ite/it8716f/superio.c. */ -void init_ec(u16 base) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(sequence); i++) - write_index(base, sequence[i].index, sequence[i].value); -} diff --git a/src/mainboard/asus/m2n-e/get_bus_conf.c b/src/mainboard/asus/m2n-e/get_bus_conf.c deleted file mode 100644 index 6809eda4a9..0000000000 --- a/src/mainboard/asus/m2n-e/get_bus_conf.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ -// busnum is default. -unsigned char bus_mcp55[8]; // 1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { - /* Here you only need to set value in pci1234 for HT-IO that could - * be installed or not. You may need to preset pci1234 for HTIO board, - * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. - */ - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { - /* HT Chain device num, actually it is unit id base of every ht - * device in chain, assume every chain only have 4 ht device at most. - */ - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned int apicid_base, sbdn; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) - bus_mcp55[i] = 0; - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, " - "using defaults\n", sbdn + 0x06); - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_mcp55 = apicid_base + 0; -} diff --git a/src/mainboard/asus/m2n-e/hda_verb.c b/src/mainboard/asus/m2n-e/hda_verb.c deleted file mode 100644 index 3c82ba84e0..0000000000 --- a/src/mainboard/asus/m2n-e/hda_verb.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * HDA codec soldered onto the ASUS M2N-E: - * Analog Devices AD1988B (High Definition Audio SoundMAX Codec), rev. 0x100200 - * http://www.analog.com/static/imported-files/data_sheets/AD1988A_1988B.pdf - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x11d4198b, /* Codec Vendor / Device ID: Analog Devices AD1988B */ - 0x104381f6, /* Subsystem ID (0x1043 == ASUS) */ - 0x0000000d, /* Number of "pin complex" entries in the table */ - - /* NID 0x01, FUNCTION, Designates this device as an audio codec */ - /* Set the Implementation ID (IID), here: 0x104381f6. */ - AZALIA_SUBVENDOR(0x0, 0x104381f6), - - /* "Pin complex" HDA widgets. Comments: Node ID, Name, Description. */ - - /* NID 0x11, Port A, Front panel headphone jack */ - AZALIA_PIN_CFG(0x0, 0x11, 0x02214130), - - /* NID 0x12, Port D, Rear panel front speaker jack */ - AZALIA_PIN_CFG(0x0, 0x12, 0x01014010), - - /* NID 0x13, MONO_OUT, Monaural output pin */ - AZALIA_PIN_CFG(0x0, 0x13, 0x511711f0), - - /* NID 0x14, Port B, Front panel microphone jack */ - AZALIA_PIN_CFG(0x0, 0x14, 0x02a19122), - - /* NID 0x15, Port C, Rear panel line-in jack */ - AZALIA_PIN_CFG(0x0, 0x15, 0x01813021), - - /* NID 0x16, Port F, Rear panel surround-back (5.1) jack */ - AZALIA_PIN_CFG(0x0, 0x16, 0x01011012), - - /* NID 0x17, Port E, Rear panel microphone jack */ - AZALIA_PIN_CFG(0x0, 0x17, 0x01a19020), - - /* NID 0x18, CD IN, Analog CD input */ - AZALIA_PIN_CFG(0x0, 0x18, 0x9933112e), - - /* NID 0x1a, Analog PCBEEP, External analog PCBEEP signal input */ - AZALIA_PIN_CFG(0x0, 0x1a, 0x99f301f0), - - /* NID 0x1b, S/PDIF Out, S/PDIF output pin */ - AZALIA_PIN_CFG(0x0, 0x1b, 0x0145f1f0), - - /* NID 0x1c, S/PDIF In, S/PDIF input pin */ - AZALIA_PIN_CFG(0x0, 0x1c, 0x41c5f1f0), - - /* NID 0x24, Port G, Rear panel C/LFE jack */ - AZALIA_PIN_CFG(0x0, 0x24, 0x01016011), - - /* NID 0x25, Port H, Rear panel surround-side (7.1) jack */ - AZALIA_PIN_CFG(0x0, 0x25, 0x01012014), -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/asus/m2n-e/mptable.c b/src/mainboard/asus/m2n-e/mptable.c deleted file mode 100644 index 5d9f0fc400..0000000000 --- a/src/mainboard/asus/m2n-e/mptable.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, \ - MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, \ - bus_mcp55[bus], (((dev) << 2) | (fn)), apicid_mcp55, (pin)) - -extern unsigned char bus_mcp55[8]; -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned int sbdn; - int i, j, bus_isa; - struct device *dev; - struct resource *res; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - - pci_write_config32(dev, 0x7c, 0x00000000); - pci_write_config32(dev, 0x80, 0x11002009); - pci_write_config32(dev, 0x84, 0x2000dd08); - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /* I/O Ints */ - PCI_INT(0, sbdn + 1, 1, 10); /* SMBus */ - PCI_INT(0, sbdn + 2, 0, 20); /* USB 1.1 */ - PCI_INT(0, sbdn + 2, 1, 22); /* USB 2.0 */ - PCI_INT(0, sbdn + 4, 0, 14); /* IDE */ - PCI_INT(0, sbdn + 5, 0, 23); /* SATA 0 */ - PCI_INT(0, sbdn + 5, 1, 23); /* SATA 1 */ - PCI_INT(0, sbdn + 5, 2, 22); /* SATA 2 */ - PCI_INT(0, sbdn + 6, 1, 21); /* HD audio */ - PCI_INT(0, sbdn + 8, 0, 24); /* NIC */ - - /* PCI-E slots (two x1, one x4, one x16) */ - for (j = 7; j >= 2; j--) { - if (!bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - PCI_INT(j, 0, i, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); - } - - /* PCI slots (three on this board) */ - for (j = 0; j < 3; j++) { - for (i = 0; i < 4; i++) - PCI_INT(1, 0x06 + j, i, 0x10 + (2 + i + j) % 4); - } - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/m2n-e/resourcemap.c b/src/mainboard/asus/m2n-e/resourcemap.c deleted file mode 100644 index 57e7389490..0000000000 --- a/src/mainboard/asus/m2n-e/resourcemap.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of CPU 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asus/m2n-e/romstage.c b/src/mainboard/asus/m2n-e/romstage.c deleted file mode 100644 index 329a95e4d7..0000000000 --- a/src/mainboard/asus/m2n-e/romstage.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <lib.h> -#include <spd.h> -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8716f/it8716f.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) {} -void activate_spd_rom(const struct mem_controller *ctrl) {} - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -/* FIXME - * Dummy method to allow build - * Determine if this board / CPU should support - * FID/VID and implement proper support if so - */ -#if IS_ENABLED(CONFIG_SET_FIDVID) -void init_fidvid_ap(u32 bsp_apicid, u32 apicid) { } -#endif - -static void sio_setup(void) -{ - u8 byte; - u32 dword; - pci_devfn_t dev = PCI_DEV(0, MCP55_DEVN_BASE + 1, 0); /* LPC */ - - /* Subject decoding */ - byte = pci_read_config8(dev, 0x7b); - byte |= (1 << 5); - pci_write_config8(dev, 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(dev, 0xa0); - dword |= (1 << 0); /* COM1 */ - pci_write_config32(dev, 0xa0, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { - DIMM0, DIMM2, 0, 0, /* Channel A (DIMM_A1, DIMM_A2) */ - DIMM1, DIMM3, 0, 0, /* Channel B (DIMM_B1, DIMM_B2) */ - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - setup_mb_resource_map(); - report_bist_failure(bist); - console_init(); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo, sysinfo + 1); - printk(BIOS_DEBUG, "bsp_apicid=0x%02x\n", bsp_apicid); - - /* In BSP so could hold all AP until sysinfo is in RAM. */ - set_sysinfo_in_ram(0); - - setup_coherent_ht_domain(); /* Routing table and start other core0. */ - wait_all_core0_started(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* - * It is said that we should start core1 after all core0 launched - * becase optimize_link_coherent_ht is moved out from - * setup_coherent_ht_domain, so here need to make sure last core0 is - * started, esp for two way system (there may be APIC ID conflicts in - * that case). - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* Set up chains and store link pair for optimization later. */ - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - /* TODO: FIDVID */ - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - /* - * FIDVID change will issue one LDTSTOP and the HT change will be - * effective too. - */ - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} diff --git a/src/mainboard/asus/m2v-mx_se/Kconfig b/src/mainboard/asus/m2v-mx_se/Kconfig deleted file mode 100644 index 60ed865fad..0000000000 --- a/src/mainboard/asus/m2v-mx_se/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Cristi Măgherușan <cristi.magherusan@net.utcluj.ro> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -if BOARD_ASUS_M2V_MX_SE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select QRANK_DIMM_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8M890 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select VGA - select HAVE_ACPI_RESUME - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/m2v-mx_se - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "M2V-MX SE" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -endif # BOARD_ASUS_M2V_MX_SE diff --git a/src/mainboard/asus/m2v-mx_se/Kconfig.name b/src/mainboard/asus/m2v-mx_se/Kconfig.name deleted file mode 100644 index f15d444131..0000000000 --- a/src/mainboard/asus/m2v-mx_se/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_M2V_MX_SE - bool "M2V-MX SE" diff --git a/src/mainboard/asus/m2v-mx_se/acpi_tables.c b/src/mainboard/asus/m2v-mx_se/acpi_tables.c deleted file mode 100644 index 397d310a99..0000000000 --- a/src/mainboard/asus/m2v-mx_se/acpi_tables.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer <stepan@openbios.org>. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/m2v-mx_se/board_info.txt b/src/mainboard/asus/m2v-mx_se/board_info.txt deleted file mode 100644 index 00139ad873..0000000000 --- a/src/mainboard/asus/m2v-mx_se/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2VMX_SE/ -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y -Release year: 2007 diff --git a/src/mainboard/asus/m2v-mx_se/cmos.default b/src/mainboard/asus/m2v-mx_se/cmos.default deleted file mode 100644 index fae766bc88..0000000000 --- a/src/mainboard/asus/m2v-mx_se/cmos.default +++ /dev/null @@ -1,11 +0,0 @@ -boot_option = Fallback -hw_scrubber = Enable -interleave_chip_selects = Enable -max_mem_clock = DDR2-400 -multi_core = Enable -power_on_after_fail = On -debug_level = Spew -slow_cpu = off -nmi = Disable -videoram_size = 8MB -iommu = Enable diff --git a/src/mainboard/asus/m2v-mx_se/cmos.layout b/src/mainboard/asus/m2v-mx_se/cmos.layout deleted file mode 100644 index 29476ecc33..0000000000 --- a/src/mainboard/asus/m2v-mx_se/cmos.layout +++ /dev/null @@ -1,60 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -448 3 e 10 videoram_size -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% -# videoram_size: mimics the bits in the ramcontroller. -10 1 8MB -10 2 16MB -10 3 32MB -10 4 64MB -10 5 128MB -10 6 256MB - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m2v-mx_se/devicetree.cb b/src/mainboard/asus/m2v-mx_se/devicetree.cb deleted file mode 100644 index 213e3ea9c0..0000000000 --- a/src/mainboard/asus/m2v-mx_se/devicetree.cb +++ /dev/null @@ -1,77 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_AM2 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0xc0" # Enable SB functions - register "fn_ctrl_hi" = "0x1d" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 0x00 - end - device pnp 2e.5 off end # PS/2 keyboard - device pnp 2e.6 off end # PS/2 mouse - device pnp 2e.7 off end # GPIO config - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 12.0 on end # VIA LAN - device pci 13.0 on end # br - device pci 13.1 on end # br2 need to have it here to discover it - end - chip southbridge/via/k8t890 # "Southbridge" K8M890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/m2v-mx_se/dsdt.asl b/src/mainboard/asus/m2v-mx_se/dsdt.asl deleted file mode 100644 index 30ce550996..0000000000 --- a/src/mainboard/asus/m2v-mx_se/dsdt.asl +++ /dev/null @@ -1,241 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - #include <southbridge/via/k8t890/acpi/sleepstates.asl> - - /* blink a LED when entering the sleep (any type) */ - Method (_PTS, 1, NotSerialized) - { - Store (0x1, \_SB.PCI0.ISA.LEDR) - } - - /* cancel a LED blinking when waking from sleep (any type) */ - Method (_WAK, 1, NotSerialized) - { - Store (0x0, \_SB.PCI0.ISA.LEDR) - /* wake OK */ - Return(Package(0x02){0x00, 0x00}) - } - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x15 }, /* 0xf SATA IRQ 21 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x14 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x16 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x17 }, - Package (0x04) { 0x0012FFFF, 0x00, 0x00, 0x17 }, /* LAN */ - Package (0x04) { 0x0013FFFF, 0x00, 0x00, 0x14 }, /* PCIe bridge SB */ - Package (0x04) { 0x0013FFFF, 0x02, 0x00, 0x16 }, /* PCIe bridge SB */ - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP pridge */ - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, /* FIXME FIXME */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ - }) - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x00130000) - Name (_UID, 0x00) - Name (_BBN, 0x4) - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x11 }, /* PCIE audio */ - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (TBRG) - { - Name (_ADR, 0x00130001) - Name (_UID, 0x00) - Name (_BBN, 0x5) - Name (_PRT, Package () { - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x10 }, /* PCI slot */ - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x11 }, /* PCI slot */ - Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x10 }, - }) - } - Device (ISA) { - Name (_ADR, 0x00110000) - OperationRegion (PCIC, PCI_Config, 0x0, 0xff) - Field (PCIC, ByteAcc, NoLock, Preserve) - { - Offset (0x94), - /* two LSB bits are blink rate */ - LEDR, 2, - } - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - /* Dummy device to hold auto generated reserved resources */ - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - } - } -} diff --git a/src/mainboard/asus/m2v-mx_se/romstage.c b/src/mainboard/asus/m2v-mx_se/romstage.c deleted file mode 100644 index 322f76302f..0000000000 --- a/src/mainboard/asus/m2v-mx_se/romstage.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/amd/mtrr.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" - -#define SB_VFSMAF 0 - -static void ldtstop_sb(void) -{ - printk(BIOS_DEBUG, "toggle LDTSTP#\n"); - - /* fix errata #181, disable DRAM controller it will get enabled later */ - u8 tmp = pci_read_config8(PCI_DEV(0, 0x18, 2), 0x94); - tmp |= (( 1 << 14) | (1 << 3)); - pci_write_config8(PCI_DEV(0, 0x18, 2), 0x94, tmp); - - u8 reg = inb (VT8237R_ACPI_IO_BASE + 0x5c); - reg = reg ^ (1 << 0); - outb(reg, VT8237R_ACPI_IO_BASE + 0x5c); - reg = inb(VT8237R_ACPI_IO_BASE + 0x15); - printk(BIOS_DEBUG, "done\n"); -} - -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - ite_enable_3vsbsw(GPIO_DEV); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting...\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... All core 0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - printk(BIOS_DEBUG, "%02x", needs_reset); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - printk(BIOS_DEBUG, "%02x", needs_reset); - needs_reset |= k8t890_early_setup_ht(); - printk(BIOS_DEBUG, "%02x", needs_reset); - - vt8237_early_network_init(NULL); - vt8237_early_spi_init(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - printk(BIOS_DEBUG, "FAILED!\n"); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - /* allow LDT STOP asserts */ - vt8237_sb_enable_fid_vid(); - - enable_fid_change(); - printk(BIOS_DEBUG, "after enable_fid_change\n"); - - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/asus/m2v/Kconfig b/src/mainboard/asus/m2v/Kconfig deleted file mode 100644 index 26bfeef26f..0000000000 --- a/src/mainboard/asus/m2v/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -if BOARD_ASUS_M2V - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select QRANK_DIMM_SUPPORT - select K8_HT_FREQ_1G_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select HAVE_ACPI_RESUME - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select HAVE_MP_TABLE - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/m2v - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "M2V" - -config HW_MEM_HOLE_SIZEK - hex - default 0x0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 14 - -endif # BOARD_ASUS_M2V diff --git a/src/mainboard/asus/m2v/Kconfig.name b/src/mainboard/asus/m2v/Kconfig.name deleted file mode 100644 index c0fc2f31a3..0000000000 --- a/src/mainboard/asus/m2v/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_ASUS_M2V - bool "M2V" diff --git a/src/mainboard/asus/m2v/acpi_tables.c b/src/mainboard/asus/m2v/acpi_tables.c deleted file mode 100644 index fce0fb6db2..0000000000 --- a/src/mainboard/asus/m2v/acpi_tables.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer <stepan@openbios.org>. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/m2v/board_info.txt b/src/mainboard/asus/m2v/board_info.txt deleted file mode 100644 index 1abcb5b361..0000000000 --- a/src/mainboard/asus/m2v/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2V/ -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y -Release year: 2007 diff --git a/src/mainboard/asus/m2v/cmos.layout b/src/mainboard/asus/m2v/cmos.layout deleted file mode 100644 index aae7ceb075..0000000000 --- a/src/mainboard/asus/m2v/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m2v/devicetree.cb b/src/mainboard/asus/m2v/devicetree.cb deleted file mode 100644 index 61d94bad3f..0000000000 --- a/src/mainboard/asus/m2v/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_AM2 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0xc0" # Enable SB functions - register "fn_ctrl_hi" = "0x0d" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off end # Com2 (N/A on this board) - device pnp 2e.3 on # Lpt1 - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0xd00 - io 0x62 = 0xc00 - irq 0x70 = 0x00 - end - device pnp 2e.5 off end # PS/2 keyboard - device pnp 2e.6 off end # PS/2 mouse - device pnp 2e.7 off end # GPIO config - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - device pci 13.0 on end # br - device pci 13.1 on end # br2, need to have it here to discover it - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/m2v/dsdt.asl b/src/mainboard/asus/m2v/dsdt.asl deleted file mode 100644 index 760d5e214c..0000000000 --- a/src/mainboard/asus/m2v/dsdt.asl +++ /dev/null @@ -1,545 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Tobias Diedrich <ranma+coreboot@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -#define LNKA INTA -#define LNKB INTB -#define LNKC INTC -#define LNKD INTD - -/* - * For simplicity map LNK[E-H] to LNK[A-D]. - * This also means we are 82C596 compatible. - * Needs 0:11.0 0x46[4] set to 0. - */ -#define LNKE INTA -#define LNKF INTB -#define LNKG INTC -#define LNKH INTD - -DefinitionBlock ("DSDT.aml", "DSDT", 2, "CORE ", "COREBOOT", 1) -{ - Name(APIC, 0) // 0=>8259, 1=>IOAPIC - - /* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - - Method(_PIC, 1) - { - // Remember the OS' IRQ routing choice. - Store(Arg0, APIC) - } - - /* _PR CPU0 is dynamically supplied by SSDT */ - - #include <southbridge/via/k8t890/acpi/sleepstates.asl> - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180000) - Name (_BBN, 0x00) - - Name (APRT, Package() { - /* AGP? */ - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x13 }, - /* PCIe graphics bridge */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - /* PCIe bridge */ - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B }, - /* SATA */ - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x15 }, - /* IDE */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x15 }, - /* USB */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x14 }, - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x16 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x17 }, - /* PCI bridge */ - Package (0x04) { 0x0013FFFF, 0x00, 0x00, 0x14 }, - Package (0x04) { 0x0013FFFF, 0x01, 0x00, 0x14 }, - Package (0x04) { 0x0013FFFF, 0x02, 0x00, 0x14 }, - Package (0x04) { 0x0013FFFF, 0x03, 0x00, 0x14 }, - }) - Name (PPRT, Package() { - /* ?? */ - Package (0x04) { 0x0001FFFF, 0x00, LNKA, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, LNKB, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, LNKD, 0x00 }, - /* PCIe graphics bridge */ - Package (0x04) { 0x0002FFFF, 0x00, LNKH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, LNKH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x02, LNKH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x03, LNKH, 0x00 }, - /* PCIe bridge */ - Package (0x04) { 0x0003FFFF, 0x00, LNKH, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, LNKH, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, LNKH, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, LNKH, 0x00 }, - /* SATA */ - Package (0x04) { 0x000FFFFF, 0x01, LNKB, 0x00 }, - /* USB */ - Package (0x04) { 0x0010FFFF, 0x00, LNKA, 0x00 }, - Package (0x04) { 0x0010FFFF, 0x01, LNKB, 0x00 }, - Package (0x04) { 0x0010FFFF, 0x02, LNKC, 0x00 }, - Package (0x04) { 0x0010FFFF, 0x03, LNKD, 0x00 }, - /* PCI bridge */ - Package (0x04) { 0x0013FFFF, 0x00, LNKD, 0x00 }, - Package (0x04) { 0x0013FFFF, 0x01, LNKD, 0x00 }, - Package (0x04) { 0x0013FFFF, 0x02, LNKD, 0x00 }, - Package (0x04) { 0x0013FFFF, 0x03, LNKD, 0x00 }, - }) - - /* PCI Routing Table */ - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (APRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - Name (PPRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, LNKH, 0x00 }, - }) - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (APRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - Name (PPRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, LNKH, 0x00 }, - }) - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - } - - Device (PEX1) - { - Name (_ADR, 0x00030001) - Name (APRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, - }) - Name (PPRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, LNKH, 0x00 }, - }) - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - } - - Device (PEX2) - { - Name (_ADR, 0x00030002) - Name (APRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, - }) - Name (PPRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, LNKH, 0x00 }, - }) - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - } - - Device (PCI6) - { - Name (_ADR, 0x00130000) - Name (APRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x11 }, /* IRQ17 */ - }) - Name (PPRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, LNKB, 0x00 }, - }) - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - } - - Device (PCI7) - { - Name (_ADR, 0x00130001) - Name (APRT, Package () { - /* PCI slot 1 */ - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 }, - - /* PCI slot 2 */ - Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x10 }, - - /* PCI slot 3 */ - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x11 }, - - /* PCI slot 4 */ - Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x12 }, - }) - Name (PPRT, Package () { - /* PCI slot 1 */ - Package (0x04) { 0x0006FFFF, 0x00, LNKA, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x01, LNKB, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x02, LNKC, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x03, LNKD, 0x00 }, - - /* PCI slot 2 */ - Package (0x04) { 0x0007FFFF, 0x00, LNKB, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x01, LNKC, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x02, LNKD, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x03, LNKA, 0x00 }, - - /* PCI slot 3 */ - Package (0x04) { 0x0008FFFF, 0x00, LNKC, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x01, LNKD, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x02, LNKA, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x03, LNKB, 0x00 }, - - /* PCI slot 4 */ - Package (0x04) { 0x0009FFFF, 0x00, LNKD, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x01, LNKA, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x02, LNKB, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x03, LNKC, 0x00 }, - }) - - Method (_PRT, 0, NotSerialized) - { - If (APIC) - { - Return (APRT) - } - Return (PPRT) - } - } - - Device (SBRG) { /* southbridge */ - Name (_ADR, 0x00110000) - OperationRegion (PCIC, PCI_Config, 0x0, 0x100) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, Serialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, Serialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* Parallel port */ - Device (LPT0) - { - Name (_HID, EisaId ("PNP0401")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, Serialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) - IO (Decode16, 0x0778, 0x0778, 0x01, 0x08) - IRQNoFlags () {7} - DMA (Compatibility, NotBusMaster, Transfer8) {3} - }) - Return (TMP) - } - } - } - - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - - External(_CRS) /* Resource Template in SSDT */ - } - - External(TOM1) /* top of memory below 4GB */ - - Method(_CRS, 0, Serialized) { - Name(TMP, ResourceTemplate() { - WordBusNumber(ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, // Granularity - 0x0000, // Range Minimum - 0x00FF, // Range Maximum - 0x0000, // Translation Offset - 0x0100, // Length - ,, - ) - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) - CreateDWordField(TMP, MMIO._BAS, MM1B) - CreateDWordField(TMP, MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(TMP) - } - } - - Field (PCI0.SBRG.PCIC, ByteAcc, NoLock, Preserve) - { - Offset (0x55), - /* - * Offset 0x55: - * 3-0: reserved - * 7-4: PCI INTA# routing - * Offset 0x56: - * 3-0: PCI INTB# routing - * 7-4: PCI INTC# routing - * Offset 0x57: - * 3-0: reserved - * 7-4: PCI INTD# routing - * - * Valid values for routing link: - * 0: disabled - * 2,8,13: reserved - * 1,3-7,9-12,14,15: corresponding irq - */ - , 4, - PINA, 4, - PINB, 4, - PINC, 4, - , 4, - PIND, 4, - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 6, 7, 10, 11, 12} - }) - - /* adapted from ma78gm/dsdt.asl */ -#define PCI_INTX_DEV(intx, pinx, uid) \ - Device(intx) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - \ - Method(_STA, 0) { \ - if (pinx) { \ - Return(0x0B) \ - } \ - Return(0x09) \ - } \ - \ - Method(_DIS ,0) { \ - Store(0, pinx) \ - } \ - \ - Method(_PRS ,0) { \ - Return(IRQP) \ - } \ - \ - Method(_CRS ,0) { \ - CreateWordField(IRQB, 1, IRQN) \ - ShiftLeft(1, pinx, IRQN) \ - Return(IRQB) \ - } \ - \ - Method(_SRS, 1) { \ - CreateWordField(ARG0, 1, IRQM) \ - \ - /* Use lowest available IRQ */ \ - FindSetRightBit(IRQM, Local0) \ - if (Local0) { \ - Decrement(Local0) \ - } \ - Store(Local0, pinx) \ - } \ - } \ - -PCI_INTX_DEV(INTA, PINA, 1) -PCI_INTX_DEV(INTB, PINB, 2) -PCI_INTX_DEV(INTC, PINC, 3) -PCI_INTX_DEV(INTD, PIND, 4) - } - - Field (_SB.PCI0.SBRG.PCIC, ByteAcc, NoLock, Preserve) - { - Offset (0x94), - /* two LSB bits are blink rate */ - LEDR, 2, - } - - Method (_PTS, 1, NotSerialized) - { - /* blink power led while suspended */ - Store (0x1, LEDR) - } - - Method (_WAK, 1, NotSerialized) - { - /* stop power led blinking */ - Store (0x0, LEDR) - /* wake OK */ - Return(Package(0x02){0x00, 0x00}) - } -} diff --git a/src/mainboard/asus/m2v/irq_tables.c b/src/mainboard/asus/m2v/irq_tables.c deleted file mode 100644 index 18bebf545e..0000000000 --- a/src/mainboard/asus/m2v/irq_tables.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Tobias Diedrich <ranma+coreboot@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * IRQ Routing Table - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM - */ -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <device/pci_ids.h> - -/* Free irqs are 3, 5, 10 and 11 */ -#define IRQBM ((1 << 3)|(1 << 5)|(1 << 10)|(1 << 11)) - -#define LNKA 1 -#define LNKB 2 -#define LNKC 3 -#define LNKD 4 - -/* - * For simplicity map LNK[E-H] to LNK[A-D]. - * This also means we are 82C596 compatible. - * Needs 0:11.0 0x46[4] set to 0. - */ -#define LNKE 1 -#define LNKF 2 -#define LNKG 3 -#define LNKH 4 - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - (0x11 << 3)|0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - PCI_VENDOR_ID_VIA, /* Compatible Vendor (VIA) */ - PCI_DEVICE_ID_VIA_82C596, /* Compatible Device (82C596) */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5f, /* u8 checksum, this has to be set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - /* peg bridge */ - {0x00, (0x02 << 3) | 0x0, {{LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}}, 0x0, 0x0}, - /* pcie bridge */ - {0x00, (0x03 << 3) | 0x0, {{LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}}, 0x0, 0x0}, - /* sata/ide */ - {0x00, (0x0f << 3) | 0x0, {{0x00, 0x0000}, {LNKB, IRQBM}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - /* usb */ - {0x00, (0x10 << 3) | 0x0, {{LNKA, IRQBM}, {LNKB, IRQBM}, {LNKC, IRQBM}, {LNKD, IRQBM}}, 0x0, 0x0}, - /* agp bus? */ - {0x01, (0x00 << 3) | 0x0, {{LNKA, IRQBM}, {LNKB, IRQBM}, {LNKC, IRQBM}, {LNKD, IRQBM}}, 0x0, 0x0}, - /* pcie graphics */ - {0x02, (0x00 << 3) | 0x0, {{LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}}, 0x6, 0x0}, - /* onboard pcie atl1 ethernet */ - {0x03, (0x00 << 3) | 0x0, {{LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}}, 0x0, 0x0}, - /* pcie slot */ - {0x04, (0x00 << 3) | 0x0, {{LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}}, 0x5, 0x0}, - /* onboard marvell mv6121 sata */ - {0x05, (0x00 << 3) | 0x0, {{LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}, {LNKH, IRQBM}}, 0x0, 0x0}, - /* Azalia HDAC */ - {0x06, (0x01 << 3) | 0x0, {{LNKB, IRQBM}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - /* PCI slots */ - {0x07, (0x06 << 3) | 0x0, {{LNKA, IRQBM}, {LNKB, IRQBM}, {LNKC, IRQBM}, {LNKD, IRQBM}}, 0x1, 0x0}, - {0x07, (0x07 << 3) | 0x0, {{LNKB, IRQBM}, {LNKC, IRQBM}, {LNKD, IRQBM}, {LNKA, IRQBM}}, 0x2, 0x0}, - {0x07, (0x08 << 3) | 0x0, {{LNKC, IRQBM}, {LNKD, IRQBM}, {LNKA, IRQBM}, {LNKB, IRQBM}}, 0x3, 0x0}, - {0x07, (0x09 << 3) | 0x0, {{LNKD, IRQBM}, {LNKA, IRQBM}, {LNKB, IRQBM}, {LNKC, IRQBM}}, 0x4, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/m2v/mainboard.c b/src/mainboard/asus/m2v/mainboard.c deleted file mode 100644 index e16faebfae..0000000000 --- a/src/mainboard/asus/m2v/mainboard.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Tobias Diedrich <ranma+coreboot@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <console/console.h> -#include "southbridge/via/vt8237r/vt8237r.h" - -u32 vt8237_ide_80pin_detect(struct device *dev) -{ - struct device *lpc_dev; - u16 acpi_io_base; - u32 gpio_in; - u32 res; - - lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237A_LPC, 0); - if (!lpc_dev) - return 0; - - acpi_io_base = pci_read_config16(lpc_dev, 0x88) & ~1; - if (!acpi_io_base) - return 0; - - gpio_in = inl(acpi_io_base + 0x48); - /* bit 9 for primary port, clear if unconnected or 80-pin cable */ - res = gpio_in & (1 << 9) ? 0 : VT8237R_IDE0_80PIN_CABLE; - /* bit 4 for secondary port, clear if unconnected or 80-pin cable */ - res |= gpio_in & (1 << 4) ? 0 : VT8237R_IDE1_80PIN_CABLE; - - printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "primary", - res & VT8237R_IDE0_80PIN_CABLE ? 80 : 40); - printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "secondary", - res & VT8237R_IDE1_80PIN_CABLE ? 80 : 40); - - return res; -} diff --git a/src/mainboard/asus/m2v/mptable.c b/src/mainboard/asus/m2v/mptable.c deleted file mode 100644 index 8de77ccdb5..0000000000 --- a/src/mainboard/asus/m2v/mptable.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2010 Tobias Diedrich <ranma+coreboot@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" - -static void smp_write_intsrc_pci(struct mp_config_table *mc, - unsigned char srcbus, unsigned char srcbusirq, - unsigned char dstapic, unsigned char dstirq) -{ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - srcbus, srcbusirq, dstapic, dstirq); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void*)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x3, VIO_APIC_VADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x3, (void*)K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - /* agp? bridge */ - smp_write_intsrc_pci(mc, 0, (0x1 << 2) | 0, VT8237R_APIC_ID, 0x10); - smp_write_intsrc_pci(mc, 0, (0x1 << 2) | 1, VT8237R_APIC_ID, 0x11); - smp_write_intsrc_pci(mc, 0, (0x1 << 2) | 2, VT8237R_APIC_ID, 0x12); - smp_write_intsrc_pci(mc, 0, (0x1 << 2) | 3, VT8237R_APIC_ID, 0x13); - - /* peg bridge */ - smp_write_intsrc_pci(mc, 0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc_pci(mc, 0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc_pci(mc, 0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc_pci(mc, 0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - /* pex bridge */ - smp_write_intsrc_pci(mc, 0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc_pci(mc, 0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc_pci(mc, 0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc_pci(mc, 0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* SATA / IDE */ - smp_write_intsrc_pci(mc, 0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x15); - - /* USB */ - smp_write_intsrc_pci(mc, 0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc_pci(mc, 0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x16); - smp_write_intsrc_pci(mc, 0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc_pci(mc, 0, (0x10 << 2) | 3, VT8237R_APIC_ID, 0x17); - - /* PCIE graphics */ - smp_write_intsrc_pci(mc, 2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc_pci(mc, 2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc_pci(mc, 2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc_pci(mc, 2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - /* onboard PCIE atl1 ethernet */ - smp_write_intsrc_pci(mc, 3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc_pci(mc, 3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc_pci(mc, 3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc_pci(mc, 3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - /* PCIE slot */ - smp_write_intsrc_pci(mc, 4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc_pci(mc, 4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc_pci(mc, 4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc_pci(mc, 4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - /* onboard marvell mv6121 sata */ - smp_write_intsrc_pci(mc, 5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc_pci(mc, 5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc_pci(mc, 5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc_pci(mc, 5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - /* azalia HDCA */ - smp_write_intsrc_pci(mc, 6, (0x01 << 2) | 0, VT8237R_APIC_ID, 0x11); - - /* pci slot 1 */ - smp_write_intsrc_pci(mc, 7, (6 << 2) | 0, VT8237R_APIC_ID, 0x10); - smp_write_intsrc_pci(mc, 7, (6 << 2) | 1, VT8237R_APIC_ID, 0x11); - smp_write_intsrc_pci(mc, 7, (6 << 2) | 2, VT8237R_APIC_ID, 0x12); - smp_write_intsrc_pci(mc, 7, (6 << 2) | 3, VT8237R_APIC_ID, 0x13); - - /* pci slot 2 */ - smp_write_intsrc_pci(mc, 7, (7 << 2) | 0, VT8237R_APIC_ID, 0x11); - smp_write_intsrc_pci(mc, 7, (7 << 2) | 1, VT8237R_APIC_ID, 0x12); - smp_write_intsrc_pci(mc, 7, (7 << 2) | 2, VT8237R_APIC_ID, 0x13); - smp_write_intsrc_pci(mc, 7, (7 << 2) | 3, VT8237R_APIC_ID, 0x10); - - /* pci slot 3 */ - smp_write_intsrc_pci(mc, 7, (8 << 2) | 0, VT8237R_APIC_ID, 0x12); - smp_write_intsrc_pci(mc, 7, (8 << 2) | 1, VT8237R_APIC_ID, 0x13); - smp_write_intsrc_pci(mc, 7, (8 << 2) | 2, VT8237R_APIC_ID, 0x10); - smp_write_intsrc_pci(mc, 7, (8 << 2) | 3, VT8237R_APIC_ID, 0x11); - - /* pci slot 4 */ - smp_write_intsrc_pci(mc, 7, (9 << 2) | 0, VT8237R_APIC_ID, 0x13); - smp_write_intsrc_pci(mc, 7, (9 << 2) | 1, VT8237R_APIC_ID, 0x10); - smp_write_intsrc_pci(mc, 7, (9 << 2) | 2, VT8237R_APIC_ID, 0x11); - smp_write_intsrc_pci(mc, 7, (9 << 2) | 3, VT8237R_APIC_ID, 0x12); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, 0); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/m2v/romstage.c b/src/mainboard/asus/m2v/romstage.c deleted file mode 100644 index d49f231f75..0000000000 --- a/src/mainboard/asus/m2v/romstage.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/amd/mtrr.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) -#define CLKIN_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -#define IT8712F_GPIO_BASE 0x0a20 - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -struct gpio_init_val { - u8 addr; - u8 val; -}; - -static const struct gpio_init_val gpio_init_data[] = { - /* multi-function pin selection */ - { 0x25, 0x00 }, - { 0x28, 0x00 }, /* gp46 is infrared receive input */ - { 0x29, 0x40 }, /* reserved value?!? */ - { 0x2a, 0x00 }, - { 0x2c, 0x1d }, /* pin91 is VIN7 instead of PCIRSTIN# */ - /* gpio i/o port base */ - { 0x62, IT8712F_GPIO_BASE >> 8 }, - { 0x63, IT8712F_GPIO_BASE & 0xff }, - /* 0xb8 - 0xbc: gpio pull-up enable */ - { 0xb8, 0x00 }, - /* 0xc0 - 0xc4: gpio alternate function select */ - { 0xc0, 0x00 }, - { 0xc3, 0x00 }, - { 0xc4, 0xc0 }, - /* 0xc8 - 0xcc: gpio output enable */ - { 0xc8, 0x00 }, - { 0xcb, 0x00 }, - { 0xcc, 0xc0 }, - /* end of list */ - { 0, 0 }, -}; - -static void m2v_it8712f_gpio_init(void) -{ - const struct gpio_init_val *giv; - - printk(BIOS_SPEW, "it8712f gpio init...\n"); - - /* - * it8712f gpio config - * - * Most importantly this switches pin 91 from - * PCIRSTIN# to VIN7. - * Note that only PCIRST3# and PCIRST5# are affected - * by PCIRSTIN#, the PCIRST1#, PCIRST2#, PCIRST4# are always - * direct buffers of #LRESET (low pin count bus reset). - * If this is not done All PCIRST are in reset state and the - * pcie slots don't initialize. - * - * pci reset handling: - * pin 91: VIN7 (alternate PCIRSTIN#) - * pin 48: PCIRST5# / gpio port 5 bit 0 - * pin 84: PCIRST4# / gpio port 1 bit 0 - * pin 31: PCIRST1# / gpio port 1 bit 4 - * pin 33: PCIRST2# / gpio port 1 bit 2 - * pin 34: PCIRST3# / gpio port 1 bit 1 - * - * PCIRST[0-5]# are connected as follows: - * pcirst1# -> pci bus - * pcirst2# -> ide bus - * pcirst3# -> pcie devices - * pcirst4# -> pcie graphics - * pcirst5# -> maybe n/c (untested) - * - * For software control of PCIRST[1-5]#: - * 0x2a = 0x17 (deselect pcirst# hardwiring, enable 0x25 control) - * 0x25 = 0x17 (select gpio function) - * 0xc0 = 0x17, 0xc8 = 0x17 gpio port 1 select & output enable - * 0xc4 = 0xc1, 0xcc = 0xc1 gpio port 5 select & output enable - */ - giv = gpio_init_data; - while (giv->addr) { - printk(BIOS_SPEW, "it8712f gpio: %02x=%02x\n", - giv->addr, giv->val); - ite_reg_write(IT8712F_GPIO, giv->addr, giv->val); - giv++; - } - - printk(BIOS_INFO, "it8712f gpio: Setting DDR2 voltage to 1.80V\n"); - /* - * upper two bits of gpio_base+4 control ddr2 voltage: - * 11: 1.80V - * 01: 1.85V - * 10: 1.90V - * 00: 1.95V - * - * The lower six bits are inputs and normally read back as 1 - * (except bit 2, which seems rather random). - */ - outb(0xff, IT8712F_GPIO_BASE+4); -} - -static void m2v_bus_init(void) -{ - pci_devfn_t dev; - - printk(BIOS_SPEW, "m2v_bus_init\n"); - - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_K8T890CF_0), 0); - pci_write_config8(dev, K8T890_MULTIPLE_FN_EN, 0x01); - - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_K8T890CF_5), 0); - /* - * bit | meaning - * 6 | 0: hide scratch register function 0:0.6 (we don't use it) - * 5 | 1: enable pcie bridge 0:2.0 - * 4 | 0: hide pcie bridge 0:3.3 (not connected) - * 3 | 1: enable pcie bridge 0:3.2 - * 2 | 1: enable pcie bridge 0:3.1 - * 1 | 1: enable pcie bridge 0:3.0 - */ - pci_write_config8(dev, 0xf0, 0x2e); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - console_init(); - enable_rom_decode(); - m2v_bus_init(); - m2v_it8712f_gpio_init(); - ite_enable_3vsbsw(GPIO_DEV); - - printk(BIOS_INFO, "now booting...\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... All core 0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - printk(BIOS_DEBUG, "%02x", needs_reset); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - printk(BIOS_DEBUG, "%02x", needs_reset); - needs_reset |= k8t890_early_setup_ht(); - printk(BIOS_DEBUG, "%02x", needs_reset); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - printk(BIOS_DEBUG, "FAILED!\n"); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - /* allow LDT STOP asserts */ - vt8237_sb_enable_fid_vid(); - - enable_fid_change(); - printk(BIOS_DEBUG, "after enable_fid_change\n"); - - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/broadcom/Kconfig b/src/mainboard/broadcom/Kconfig deleted file mode 100644 index da78266114..0000000000 --- a/src/mainboard/broadcom/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_BROADCOM - -choice - prompt "Mainboard model" - -source "src/mainboard/broadcom/*/Kconfig.name" - -endchoice - -source "src/mainboard/broadcom/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Broadcom" - -endif # VENDOR_BROADCOM diff --git a/src/mainboard/broadcom/Kconfig.name b/src/mainboard/broadcom/Kconfig.name deleted file mode 100644 index 434694fa99..0000000000 --- a/src/mainboard/broadcom/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_BROADCOM - bool "Broadcom" diff --git a/src/mainboard/broadcom/blast/Kconfig b/src/mainboard/broadcom/blast/Kconfig deleted file mode 100644 index ddd2acad36..0000000000 --- a/src/mainboard/broadcom/blast/Kconfig +++ /dev/null @@ -1,58 +0,0 @@ -if BOARD_BROADCOM_BLAST - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM5780 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_I2CMUX2 - -config MAINBOARD_DIR - string - default broadcom/blast - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "Blast" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_BROADCOM_BLAST diff --git a/src/mainboard/broadcom/blast/Kconfig.name b/src/mainboard/broadcom/blast/Kconfig.name deleted file mode 100644 index 04e4966200..0000000000 --- a/src/mainboard/broadcom/blast/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_BROADCOM_BLAST - bool "Blast" diff --git a/src/mainboard/broadcom/blast/board_info.txt b/src/mainboard/broadcom/blast/board_info.txt deleted file mode 100644 index b351b8e696..0000000000 --- a/src/mainboard/broadcom/blast/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/broadcom/blast/cmos.layout b/src/mainboard/broadcom/blast/cmos.layout deleted file mode 100644 index c4c90f697f..0000000000 --- a/src/mainboard/broadcom/blast/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/broadcom/blast/devicetree.cb b/src/mainboard/broadcom/blast/devicetree.cb deleted file mode 100644 index 3e02a19a8f..0000000000 --- a/src/mainboard/broadcom/blast/devicetree.cb +++ /dev/null @@ -1,122 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x161f 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0 - chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 - device pci 1.0 on # PXB 2 0x0130 - device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 - device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 - end - device pci 2.0 on end # PCI E 1 #0x0132 - device pci 3.0 on end # PCI E 2 - device pci 4.0 on end # PCI E 3 - device pci 5.0 on end # PCI E 4 - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PPBX 0x0104 - device pci e.0 on end # SATA 0x024a - end - device pci 1.0 on # Legacy pci main 0x0205 - chip drivers/i2c/i2cmux2 # pca9554 smbus mux - device i2c 71 on end #0 pca9554 0 - device i2c 71 on end #0 pca9554 1 - device i2c 71 on end #0 pca9554 2 - device i2c 71 on end #0 pca9554 3 - device i2c 71 on end #0 pca9554 4 - device i2c 71 on end #0 pca9554 5 - device i2c 71 on #0 pca9554 6 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end - device i2c 71 on #1 pca9554 7 - chip drivers/generic/generic #dimm 1-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 53 on end - end - end - end - - end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end - end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 4.0 on end # it is in bcm5785_0 bus - end - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - - - end #domain -end diff --git a/src/mainboard/broadcom/blast/get_bus_conf.c b/src/mainboard/broadcom/blast/get_bus_conf.c deleted file mode 100644 index 879178a0d6..0000000000 --- a/src/mainboard/broadcom/blast/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_bcm5780[7]; -unsigned char bus_bcm5785_0 = 1; -unsigned char bus_bcm5785_1 = 8; -unsigned char bus_bcm5785_1_1 = 9; -unsigned apicid_bcm5785[3]; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdn2; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - bus_bcm5780[0] = bus_bcm5785_0; - - /* bcm5785 */ - dev = dev_find_slot(bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(bus_bcm5785_1, PCI_DEVFN(0x0d, 0)); - if (dev) { - bus_bcm5785_1_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:07.0, using defaults\n", - bus_bcm5785_0); - } - - /* bcm5780 */ - for (i = 1; i < 7; i++) { - dev = - dev_find_slot(bus_bcm5780[0], PCI_DEVFN(sbdn2 + i - 1, 0)); - if (dev) { - bus_bcm5780[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:01.0, using defaults\n", - bus_bcm5780[i]); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - for (i = 0; i < 3; i++) - apicid_bcm5785[i] = apicid_base + i; -} diff --git a/src/mainboard/broadcom/blast/irq_tables.c b/src/mainboard/broadcom/blast/irq_tables.c deleted file mode 100644 index 003a36b384..0000000000 --- a/src/mainboard/broadcom/blast/irq_tables.c +++ /dev/null @@ -1,101 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_bcm5780[7]; -extern unsigned char bus_bcm5785_0; -extern unsigned char bus_bcm5785_1; -extern unsigned apicid_bcm5785[3]; - -extern unsigned sbdn2; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - get_bus_conf(); - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_bcm5785_0; - pirq->rtr_devfn = (sysconf.sbdn << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1166; - pirq->rtr_device = 0x0036; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_bcm5785_0, (sysconf.sbdn << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/broadcom/blast/mptable.c b/src/mainboard/broadcom/blast/mptable.c deleted file mode 100644 index 98aa2c1f55..0000000000 --- a/src/mainboard/broadcom/blast/mptable.c +++ /dev/null @@ -1,138 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_bcm5780[7]; -extern unsigned char bus_bcm5785_0; -extern unsigned char bus_bcm5785_1; -extern unsigned char bus_bcm5785_1_1; -extern unsigned apicid_bcm5785[3]; - -extern unsigned sbdn2; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int i, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev = NULL; - struct resource *res; - for (i = 0; i < 3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_bcm5785[i], - 0x11, - res2mmio(res, 0, 0)); - } - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_bcm5785[0], 0); - -//IDE - outb(0x02, 0xc00); outb(0x0e, 0xc01); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, apicid_bcm5785[0], 0xe); // IDE - -//SATA - outb(0x07, 0xc00); outb(0x0f, 0xc01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_1, (0x0e << 2)|0, apicid_bcm5785[0], 0xf); - -//USB - outb(0x01, 0xc00); outb(0x0a, 0xc01); - for (i = 0; i < 3; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, apicid_bcm5785[0], 0xa); // - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - struct device *dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1 << 4); // enable interrupts - pci_write_config32(dev, 0x6c, dword); - - } - - } - -//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_1_1, (4 << 2)|i, apicid_bcm5785[1], 2 + (0+i)%4); // - - -//pci slot (on bcm5785) - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, (4 << 2)|i, apicid_bcm5785[1], i%2); // - - -//onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, (5 << 2)|0, apicid_bcm5785[1], 0x1); - -//PCI-X on bcm5780 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[1], (4 << 2)|i, apicid_bcm5785[1], 6 + (0+i)%4); // - - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[1], (5 << 2)|i, apicid_bcm5785[1], 6 + (1+i)%4); // - -//onboard Broadcom - for (i = 0; i < 2; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[2], (4 << 2)|i, apicid_bcm5785[1], 0xa + (0+i)%4); // - - -// First PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[5], (0 << 2)|i, apicid_bcm5785[1], 0xe); // - - -// Second PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[3], (0 << 2)|i, apicid_bcm5785[1], 0xc); // - - -// Third PCI-E x1 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5780[4], (0 << 2)|i, apicid_bcm5785[1], 0xd); // - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/broadcom/blast/resourcemap.c b/src/mainboard/broadcom/blast/resourcemap.c deleted file mode 100644 index 43a4904978..0000000000 --- a/src/mainboard/broadcom/blast/resourcemap.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * broadcom blast needs a different resource map - * - */ - -static void setup_blast_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/broadcom/blast/romstage.c b/src/mainboard/broadcom/blast/romstage.c deleted file mode 100644 index 3743abe1d9..0000000000 --- a/src/mainboard/broadcom/blast/romstage.c +++ /dev/null @@ -1,128 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> - -#include <superio/nsc/pc87417/pc87417.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) -#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) - -unsigned get_sbdn(unsigned bus); -static void memreset_setup(void) { } -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_HUB 0x71 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_HUB, device); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/broadcom/bcm5785/early_setup.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define RC0 (6 << 8) -#define RC1 (7 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, - RC1|DIMM0, RC1|DIMM2, 0, 0, - RC1|DIMM1, RC1|DIMM3, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - pc87417_enable_dev(RTC_DEV); /* Enable RTC */ - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - setup_blast_resource_map(); - -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); - dump_pci_device(PCI_DEV(0, 0x19, 0)); -#endif - - needs_reset = setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - needs_reset |= ht_setup_chains_x(); - - bcm5785_early_setup(); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - memreset_setup(); - -// init_timer(); - - sdram_initialize(nodes, ctrl); - -#if 0 - print_pci_devices(); - dump_pci_devices(); -#endif -} diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig deleted file mode 100644 index d6eddff719..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig +++ /dev/null @@ -1,65 +0,0 @@ -if BOARD_GIGABYTE_GA_2761GXDK - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_SIS_SIS966 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_ITE_IT8716F - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default gigabyte/ga_2761gxdk - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "GA-2761GXDK" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_GIGABYTE_GA_2761GXDK diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig.name b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig.name deleted file mode 100644 index 435f1a6afe..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_GIGABYTE_GA_2761GXDK - bool "GA-2761GXDK" diff --git a/src/mainboard/gigabyte/ga_2761gxdk/board_info.txt b/src/mainboard/gigabyte/ga_2761gxdk/board_info.txt deleted file mode 100644 index f861f6065a..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: GA-2761GXDK (Churchill) -Category: desktop -Board URL: http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gigabyte_dtx-mainboard/ -Release year: 2007 diff --git a/src/mainboard/gigabyte/ga_2761gxdk/cmos.layout b/src/mainboard/gigabyte/ga_2761gxdk/cmos.layout deleted file mode 100644 index 9e6a9e56f2..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb b/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb deleted file mode 100644 index 6c99032535..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb +++ /dev/null @@ -1,92 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1039 0x1234 inherit - chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/sis/sis966 - device pci 0.0 on end # Northbridge - device pci 1.0 on # AGP bridge - device pci 0.0 on end - end - device pci 2.0 on # LPC - chip superio/ite/it8716f - device pnp 2e.0 off # Floppy (N/A) - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 (N/A) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel port (N/A) - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 off # PS/2 keyboard (N/A) - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 off # Mouse (N/A) - irq 0x70 = 12 - end - device pnp 2e.8 off # MIDI (N/A) - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 off # GAME (N/A) - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR (N/A) - end - end - - device pci 2.5 off end # IDE (SiS5513) - device pci 2.6 off end # Modem (SiS7013) - device pci 2.7 off end # Audio (SiS7012) - device pci 3.0 on end # USB (SiS7001,USB1.1) - device pci 3.1 on end # USB (SiS7001,USB1.1) - device pci 3.3 on end # USB (SiS7002,USB2.0) - device pci 4.0 on end # NIC (SiS191) - device pci 5.0 on end # SATA (SiS1183,Native Mode) - device pci 6.0 on end # PCI-e x1 - device pci 7.0 on end # PCI-e x1 - device pci a.0 off end - device pci b.0 off end - device pci c.0 off end - device pci d.0 off end - device pci e.0 off end - device pci f.0 off end # HD Audio (SiS7502) - - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end # device pci 18.0 - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # mc0 - - end # PCI domain - -end #root_complex diff --git a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c deleted file mode 100644 index 75f6b9ffc0..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) - * Written by Morgan Tsai <my_tsai@sis.com> for SiS. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_sis966[8]; //1 -unsigned apicid_sis966; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) { - bus_sis966[i] = 0; - } - - bus_sis966[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* SIS966 */ - dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_sis966[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_sis966[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_sis966[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_sis966[1] = 2; - bus_sis966[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_sis966[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_sis966[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sis966 = apicid_base + 0; - -} diff --git a/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c b/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c deleted file mode 100644 index d2bc1824be..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) - * Written by Morgan Tsai <my_tsai@sis.com> for SiS. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_sis966[8]; //1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(2, 0); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = PCI_VENDOR_ID_SIS; - pirq->rtr_device = PCI_DEVICE_ID_SIS_SIS966_LPC; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - write_pirq_info(pirq_info, 0, PCI_DEVFN(2, 0), 0x1, 0xdef8, 0x2, 0xdef8, - 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - { - struct device *dev; - dev = dev_find_slot(0, PCI_DEVFN(2, 0)); - if (dev) { - /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D - - PINTA = IRQ10 - PINTB = IRQ11 - PINTC = NA - PINTD = IRQ10 - PINTE = IRQ11 - PINTF = IRQ5 - PINTG = NA - PINTH = IRQ7 - - */ - uint8_t reg[8] = { - 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 - }; - uint8_t irq[8] = { - 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 - }; - - for (i = 0; i < 8; i++) - pci_write_config8(dev, reg[i], irq[i]); - } - - printk(BIOS_DEBUG, "Setting Onboard SiS Southbridge\n"); - - dev = dev_find_slot(0, PCI_DEVFN(2, 5)); // 5513 (IDE) - pci_write_config8(dev, 0x3C, 0x0A); - dev = dev_find_slot(0, PCI_DEVFN(3, 0)); // USB 1.1 - pci_write_config8(dev, 0x3C, 0x0B); - dev = dev_find_slot(0, PCI_DEVFN(3, 1)); // USB 1.1 - pci_write_config8(dev, 0x3C, 0x05); - dev = dev_find_slot(0, PCI_DEVFN(3, 3)); // USB 2.0 - pci_write_config8(dev, 0x3C, 0x07); - dev = dev_find_slot(0, PCI_DEVFN(4, 0)); // 191 (LAN) - pci_write_config8(dev, 0x3C, 0x0A); - dev = dev_find_slot(0, PCI_DEVFN(5, 0)); // 1183 (SATA) - pci_write_config8(dev, 0x3C, 0x0B); - dev = dev_find_slot(0, PCI_DEVFN(6, 0)); // PCI-E - pci_write_config8(dev, 0x3C, 0x0A); - dev = dev_find_slot(0, PCI_DEVFN(7, 0)); // PCI-E - pci_write_config8(dev, 0x3C, 0x0A); - dev = dev_find_slot(0, PCI_DEVFN(15, 0)); // Azalia - pci_write_config8(dev, 0x3C, 0x05); - } - - printk(BIOS_DEBUG, "pirq routing table, size=%d\n", pirq->size); - for (i = 0; i < pirq->size; i += 4) - printk(BIOS_DEBUG, "%.2x%.2x%.2x%.2x\n", v[i + 3], v[i + 2], - v[i + 1], v[i]); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/gigabyte/ga_2761gxdk/mptable.c b/src/mainboard/gigabyte/ga_2761gxdk/mptable.c deleted file mode 100644 index ae59264cba..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/mptable.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) - * Written by Morgan Tsai <my_tsai@sis.com> for SiS. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_sis966[8]; //1 - -extern unsigned apicid_sis966; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_sis966, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd0001202; - pci_write_config32(dev, 0x84, dword); - - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sis966, 0); - -/* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sis966[bus], (((dev)<<2)|(fn)), apicid_sis966, (pin)) - - PCI_INT(0, sbdn+1, 1, 0xa); - PCI_INT(0, sbdn+2, 0, 0x16); // 22 - PCI_INT(0, sbdn+2, 1, 0x17); // 23 - PCI_INT(0, sbdn+6, 1, 0x17); // 23 - PCI_INT(0, sbdn+5, 0, 0x14); // 20 - PCI_INT(0, sbdn+5, 1, 0x17); // 23 - PCI_INT(0, sbdn+5, 2, 0x15); // 21 - PCI_INT(0, sbdn+8, 0, 0x16); // 22 - - for (j = 7; j >= 2; j--) { - if (!bus_sis966[j]) - continue; - for (i = 0; i < 4; i++) - PCI_INT(j, 0x00, i, 0x10 + (2+j+i+4-sbdn%4)%4); - } - - for (j = 0; j < 2; j++) - for (i = 0; i < 4; i++) - PCI_INT(1, 0x06+j, i, 0x10 + (2+i+j)%4); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gigabyte/ga_2761gxdk/resourcemap.c b/src/mainboard/gigabyte/ga_2761gxdk/resourcemap.c deleted file mode 100644 index 35c54c8344..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of CPU 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c deleted file mode 100644 index b014a9fa88..0000000000 --- a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) - * Written by Morgan Tsai <my_tsai@sis.com> for SiS. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/sis/sis966/sis966.h> -#include "southbridge/sis/sis966/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8716f/it8716f.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/sis/sis966/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define SIS966_NUM 1 -#define SIS966_USE_NIC 1 -#define SIS966_USE_AZA 1 - -#define SIS966_PCI_E_X_0 0 - -#define SIS966_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include <southbridge/sis/sis966/early_setup_ss.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - setup_mb_resource_map(); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - sis_init_stage1(); - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synchronize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - sis_init_stage2(); -} diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig deleted file mode 100644 index 28473776bb..0000000000 --- a/src/mainboard/gigabyte/m57sli/Kconfig +++ /dev/null @@ -1,74 +0,0 @@ -if BOARD_GIGABYTE_M57SLI - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_ITE_IT8716F - select SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default gigabyte/m57sli - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "GA-M57SLI-S4" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 0 - -endif # BOARD_GIGABYTE_M57SLI diff --git a/src/mainboard/gigabyte/m57sli/Kconfig.name b/src/mainboard/gigabyte/m57sli/Kconfig.name deleted file mode 100644 index 32a5470fb8..0000000000 --- a/src/mainboard/gigabyte/m57sli/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_GIGABYTE_M57SLI - bool "GA-M57SLI-S4" diff --git a/src/mainboard/gigabyte/m57sli/Makefile.inc b/src/mainboard/gigabyte/m57sli/Makefile.inc deleted file mode 100644 index c18f22441a..0000000000 --- a/src/mainboard/gigabyte/m57sli/Makefile.inc +++ /dev/null @@ -1,16 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ramstage-$(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) += fanctl.c diff --git a/src/mainboard/gigabyte/m57sli/acpi_tables.c b/src/mainboard/gigabyte/m57sli/acpi_tables.c deleted file mode 100644 index 72b82f5f4d..0000000000 --- a/src/mainboard/gigabyte/m57sli/acpi_tables.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer <stepan@openbios.org>. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2009 Harald Gutmann <harald.gutmann@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <device/pci.h> -#include <cpu/amd/amdk8_sysconf.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - extern unsigned char bus_mcp55[8]; - extern unsigned apicid_mcp55; - - unsigned sbdn; - struct resource *res; - struct device *dev; - - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - apicid_mcp55, res->base, 0); - } - } - - /* Write NB IOAPIC. */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - apicid_mcp55++, res->base, gsi_base); - } - } - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/gigabyte/m57sli/board_info.txt b/src/mainboard/gigabyte/m57sli/board_info.txt deleted file mode 100644 index 33c36557c2..0000000000 --- a/src/mainboard/gigabyte/m57sli/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=2287#ov -ROM socketed: n -Flashrom support: y -Vendor cooperation score: 3 -Vendor cooperation page: Gigabyte m57sli Vendor Cooperation Score -Release year: 2006 diff --git a/src/mainboard/gigabyte/m57sli/cmos.default b/src/mainboard/gigabyte/m57sli/cmos.default deleted file mode 100644 index 62068cf4a7..0000000000 --- a/src/mainboard/gigabyte/m57sli/cmos.default +++ /dev/null @@ -1,9 +0,0 @@ -debug_level = Spew -multi_core = Enable -slow_cpu = off -max_mem_clock = 200Mhz -ECC_memory = Enable -hw_scrubber = Enable -interleave_chip_selects = Enable -power_on_after_fail = Disable -boot_option = Fallback diff --git a/src/mainboard/gigabyte/m57sli/cmos.layout b/src/mainboard/gigabyte/m57sli/cmos.layout deleted file mode 100644 index 9e6a9e56f2..0000000000 --- a/src/mainboard/gigabyte/m57sli/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb deleted file mode 100644 index efbf76e896..0000000000 --- a/src/mainboard/gigabyte/m57sli/devicetree.cb +++ /dev/null @@ -1,154 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end -end -device domain 0 on # PCI domain - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f # Super I/O - device pnp 2e.0 on # Floppy and any LDN - # Watchdog from CLKIN (24 MHz) - irq 0x23 = 0x11 - # Serial Flash (SPI only) - # 0x24 = 0x1a - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Embedded controller - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO, SPI flash - # Pin 84 is not GP10 - irq 0x25 = 0x0 - # Pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 - irq 0x26 = 0x43 - # Pin 13 is GP35 - irq 0x27 = 0x20 - # Pin 70 is not GP46 - # irq 0x28 = 0x0 - # Pin 6,3,128,127,126 is GP63,64,65,66,67 - irq 0x29 = 0x81 - # Enable FAN_CTL/FAN_TAC set to 5 (pin 21, 23), - # enable FAN_CTL/FAN_TAC set to 4 (pin 20, 22), - # pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal - # voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal - # voltage divider for VCC5V - # irq 0x2c = 0x1f - # Simple I/O base - io 0x62 = 0x800 - # Serial Flash I/O (SPI only) - io 0x64 = 0x820 - # Watchdog force timeout (parallel flash only) - # irq 0x71 = 0x1 - # No WDT interrupt - irq 0x72 = 0x0 - # GPIO pin set 1 disable internal pullup - irq 0xb8 = 0x0 - # GPIO pin set 5 enable internal pullup - irq 0xbc = 0x01 - # SIO pin set 1 alternate function - # irq 0xc0 = 0x0 - # SIO pin set 2 mixed function - irq 0xc1 = 0x43 - # SIO pin set 3 mixed function - irq 0xc2 = 0x20 - # SIO pin set 4 alternate function - # irq 0xc3 = 0x0 - # SIO pin set 1 input mode - # irq 0xc8 = 0x0 - # SIO pin set 2 input mode - irq 0xc9 = 0x0 - # SIO pin set 4 input mode - # irq 0xcb = 0x0 - # Generate SMI# on EC IRQ - # irq 0xf0 = 0x10 - # SMI# level trigger - # irq 0xf1 = 0x40 - # HWMON alert beep pin location - irq 0xf6 = 0x28 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # Consumer IR - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AUDIO - device pci 8.0 on end # NIC - device pci 9.0 off end # N/A - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/gigabyte/m57sli/dsdt.asl b/src/mainboard/gigabyte/m57sli/dsdt.asl deleted file mode 100644 index c53f36a47e..0000000000 --- a/src/mainboard/gigabyte/m57sli/dsdt.asl +++ /dev/null @@ -1,300 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2009 Harald Gutmann <harald.gutmann@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - */ - Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */ - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */ - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */ - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */ - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */ - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */ - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */ - }) - - Device (PEBF) /* PCI-E Bridge F */ - { - Name (_ADR, 0x000F0000) - Name (_UID, 0x00) - Name (_BBN, 0x07) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - Device (PEBE) /* PCI-E Bridge E */ - { - Name (_ADR, 0x000E0000) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (PEBD) /* PCI-E Bridge D */ - { - Name (_ADR, 0x000D0000) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 }, - }) - } - - Device (PEBC) /* PCI-E Bridge C */ - { - Name (_ADR, 0x000C0000) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - }) - } - - Device (PEBB) /* PCI-E Bridge B */ - { - Name (_ADR, 0x000B0000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - Device (PEBA) /* PCI-E Bridge A */ - { - Name (_ADR, 0x000A0000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (PCID) /* PCI Device */ - { - Name (_ADR, 0x00060000) - Name (_UID, 0x00) - Name (_BBN, 0x01) - Name (_PRT, Package () { - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */ - Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */ - Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */ - Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 }, - }) - } - } - - Device (ISA) { - Name (_ADR, 0x000010000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP0, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP0) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP1, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {12} - }) - Return (TMP1) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06) - IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - /* Parallel Port */ - Device (LPT1) - { - Name (_HID, EisaId ("PNP0400")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) - IRQNoFlags () {7} - }) - Return (BUF1) - } - } - /* Parallel Port ECP */ - Device (ECP1) - { - Name (_HID, EisaId ("PNP0401")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x04) - IO (Decode16, 0x0778, 0x0778, 0x01, 0x04) - IRQNoFlags() {7} - DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3} - }) - Return (BUF1) - } - } - } - } -} diff --git a/src/mainboard/gigabyte/m57sli/fanctl.c b/src/mainboard/gigabyte/m57sli/fanctl.c deleted file mode 100644 index cc0cdcac23..0000000000 --- a/src/mainboard/gigabyte/m57sli/fanctl.c +++ /dev/null @@ -1,81 +0,0 @@ -#include <arch/io.h> -#include <stdlib.h> -#include <superio/ite/it8716f/it8716f.h> - -static void write_index(uint16_t port_base, uint8_t reg, uint8_t value) -{ - outb(reg, port_base); - outb(value, port_base + 1); -} - -static const struct { - uint8_t index, value; -} sequence[]= { - /* Make sure we can monitor, and enable SMI# interrupt output */ - { 0x00, 0x13}, - /* Disable fan interrupt status bits for SMI# */ - { 0x04, 0x37}, - /* Disable VIN interrupt status bits for SMI# */ - { 0x05, 0xff}, - /* Disable fan interrupt status bits for IRQ */ - { 0x07, 0x37}, - /* Disable VIN interrupt status bits for IRQ */ - { 0x08, 0xff}, - /* Disable external sensor interrupt */ - { 0x09, 0x87}, - /* Enable 16 bit counter divisors */ - { 0x0c, 0x07}, - /* Set FAN_CTL control register (0x14) polarity to high, and - activate fans 1, 2 and 3. */ - { 0x14, 0xd7}, - /* set the correct sensor types 1,2 thermistor; 3 diode */ - { 0x51, 0x1c}, - /* set the 'zero' voltage for diode type sensor 3 */ - { 0x5c, 0x80}, -// { 0x56, 0xe5}, -// { 0x57, 0xe5}, - { 0x59, 0xec}, - { 0x5c, 0x00}, - /* fan1 (controlled by temp3) control parameters */ - /* fan off limit */ - { 0x60, 0xff}, - /* fan start limit */ - { 0x61, 0x14}, - /* ???? */ -// { 0x62, 0x00}, - /* start PWM */ - { 0x63, 0x27}, - /* smooth and slope PWM */ - { 0x64, 0x90}, - /* direct-down and interval */ - { 0x65, 0x03}, - /* temperature limit of fan stop for fan3 (automatic) */ - { 0x70, 0xff}, - /* temperature limit of fan start for fan3 (automatic) */ - { 0x71, 0x14}, - /* Set PWM start & slope for fan3 */ - { 0x73, 0x20}, - /* Initialize PWM automatic mode slope values for fan3 */ - { 0x74, 0x90}, - /* set smartguardian temperature interval for fan3 */ - { 0x75, 0x03}, - /* fan1 auto controlled by temp3 */ - { 0x15, 0x82}, - /* fan2 auto controlled by temp3 */ - { 0x16, 0x82}, - /* fan3 auto controlled by temp3 */ - { 0x17, 0x82}, - /* all fans enable, fan1 ctl smart */ - { 0x13, 0x77} -}; - -/* - * Called from superio.c - */ -void init_ec(uint16_t base) -{ - int i; - for (i = 0; i < ARRAY_SIZE(sequence); i++) { - write_index(base, sequence[i].index, sequence[i].value); - } -} diff --git a/src/mainboard/gigabyte/m57sli/get_bus_conf.c b/src/mainboard/gigabyte/m57sli/get_bus_conf.c deleted file mode 100644 index 5ef79627b4..0000000000 --- a/src/mainboard/gigabyte/m57sli/get_bus_conf.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_mcp55[8]; //1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) { - bus_mcp55[i] = 0; - } - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/gigabyte/m57sli/hda_verb.c b/src/mainboard/gigabyte/m57sli/hda_verb.c deleted file mode 100644 index 072a306131..0000000000 --- a/src/mainboard/gigabyte/m57sli/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/gigabyte/m57sli/irq_tables.c b/src/mainboard/gigabyte/m57sli/irq_tables.c deleted file mode 100644 index 4d42d7495c..0000000000 --- a/src/mainboard/gigabyte/m57sli/irq_tables.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_mcp55[8]; //1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/gigabyte/m57sli/mptable.c b/src/mainboard/gigabyte/m57sli/mptable.c deleted file mode 100644 index e9ffe52b73..0000000000 --- a/src/mainboard/gigabyte/m57sli/mptable.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2009 Harald Gutmann <harald.gutmann@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; //1 - -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, k, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - /* set up the interrupt registers of mcp55 */ - pci_write_config32(dev, 0x7c, 0xc643c643); - pci_write_config32(dev, 0x80, 0x8da01009); - pci_write_config32(dev, 0x84, 0x200018d2); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - -/* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,\ - bus_mcp55[bus], (((dev)<<2)|(fn)), apicid_mcp55, (pin)) - - PCI_INT(0,sbdn+1,1, 10); /* SMBus */ - PCI_INT(0,sbdn+2,0, 22); /* USB */ - PCI_INT(0,sbdn+2,1, 23); /* USB */ - PCI_INT(0,sbdn+4,0, 21); /* IDE */ - PCI_INT(0,sbdn+5,0, 20); /* SATA */ - PCI_INT(0,sbdn+5,1, 21); /* SATA */ - PCI_INT(0,sbdn+5,2, 22); /* SATA */ - PCI_INT(0,sbdn+6,1, 23); /* HD Audio */ - PCI_INT(0,sbdn+8,0, 20); /* GBit Ethernet */ - - /* The PCIe slots, each on its own bus */ - k = 1; - for(i = 0; i < 4; i++){ - for(j = 7; j > 1; j--){ - if(k > 3) k = 0; - PCI_INT(j,0,i, 16+k); - k++; - } - k--; - } - - /* On bus 1: the PCI bus slots... - * physical PCI slots are j = 7,8 - * FireWire is j = 10 - */ - k = 2; - for(i = 0; i < 4; i++){ - for(j = 6; j < 11; j++){ - if(k > 3) k = 0; - PCI_INT(1,j,i, 16+k); - k++; - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gigabyte/m57sli/resourcemap.c b/src/mainboard/gigabyte/m57sli/resourcemap.c deleted file mode 100644 index 35c54c8344..0000000000 --- a/src/mainboard/gigabyte/m57sli/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of CPU 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c deleted file mode 100644 index 3261c5dcb8..0000000000 --- a/src/mainboard/gigabyte/m57sli/romstage.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8716f/it8716f.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x68,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x68,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x68,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x68,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - -#if 0 - uint8_t tmp = 0; - pnp_enter_ext_func_mode(SERIAL_DEV); - /* The following line will set CLKIN to 24 MHz, external */ - pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 0x11); - tmp = pnp_read_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP); - /* Is serial flash enabled? Then enable writing to serial flash. */ - if (tmp & 0x0e) { - pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP, tmp | 0x10); - pnp_set_logical_device(GPIO_DEV); - /* Set Serial Flash interface to 0x0820 */ - pnp_write_config(GPIO_DEV, 0x64, 0x08); - pnp_write_config(GPIO_DEV, 0x65, 0x20); - } - it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); - pnp_exit_ext_func_mode(SERIAL_DEV); -#endif - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - setup_mb_resource_map(); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n", sysinfo, sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); // Need to use TMICT to synchronize FID/VID - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/hp/dl145_g1/Kconfig b/src/mainboard/hp/dl145_g1/Kconfig deleted file mode 100644 index 74ce0e726c..0000000000 --- a/src/mainboard/hp/dl145_g1/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -if BOARD_HP_DL145_G1 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8131 - select SOUTHBRIDGE_AMD_AMD8111 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_WINBOND_W83627HF - select HAVE_HARD_RESET - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select SET_FIDVID - select SET_FIDVID_DEBUG - select RAMINIT_SYSINFO -# select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_I2CMUX - select HAVE_ACPI_TABLES - -config MAINBOARD_DIR - string - default hp/dl145_g1 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "ProLiant DL145 G1" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 9 - -endif # BOARD_HP_DL145_G1 diff --git a/src/mainboard/hp/dl145_g1/Kconfig.name b/src/mainboard/hp/dl145_g1/Kconfig.name deleted file mode 100644 index 2840287608..0000000000 --- a/src/mainboard/hp/dl145_g1/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_HP_DL145_G1 - bool "ProLiant DL145 G1" diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8111.asl b/src/mainboard/hp/dl145_g1/acpi/amd8111.asl deleted file mode 100644 index 8de268bd15..0000000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8111.asl +++ /dev/null @@ -1,617 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011, 2014 Oskar Enoksson <enok@lysator.liu.se> - */ -//AMD8111 -// APIC version of the interrupt routing table -Name (APIC, Package (0x04) { - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} -}) -// PIC version of the interrupt routing table -Name (PICM, Package (0x04) { - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00}, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00}, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00}, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00} -}) -Name (DNCG, Ones) -Method (_PRT, 0, NotSerialized) { - If (LEqual (^DNCG, Ones)) { - Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0) - // Update the Device Number according to SBDN - Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) - - Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) - - Store (0x00, ^DNCG) - } - - If (LNot (PICF)) { - Return (PICM) - } Else { - Return (APIC) - } -} - -// AMD8111 System Management I/O Mapped Registers (PMxx) -OperationRegion (PMIO, SystemIO, PMBS, 0xDF) -Field (PMIO, ByteAcc, NoLock, Preserve) { - Offset (0x1E), - SWSM, 8, // Software SMI Trigger (sets GSTS) - Offset (0x28), - GSTS, 16, // Global STatuS - GNBL, 16, // Global SMI enable - Offset (0x30), - STMC, 5, // Miscellaneous SMI Status - Offset (0x32), - ENMC, 5, // Miscellaneous SMI Enable - Offset (0x44), - STC0, 9, // TCO Status 1 - Offset (0x46), - STC1, 4, // TCO Status 2 - Offset (0xA8), - STHW, 20 // Device monitor SMI Interrupt Enable -} -Device (HPET) { - Name (HPT, 0x00) - Name (_HID, EisaId ("PNP0103")) - Name (_UID, 0x00) - Method (_STA, 0, NotSerialized) { - Return (0x0F) - } - Method (_CRS, 0, Serialized) { - Name (BUF0, ResourceTemplate () { - Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) - }) - Return (BUF0) - } -} -#include "amd8111_pic.asl" -#include "amd8111_isa.asl" - -Device (TP2P) { - // 8111 P2P and it should 0x00030000 when 8131 present - Method (_ADR, 0, NotSerialized) { - Return (DADD(\_SB.PCI0.SBDN, 0x00000000)) - } - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - // result : - // [0] Bit index into GPEx_EN in the GPE block described by FADT. - // [1] The lowest power state from which the system can be awakened. - //If (CondRefOf (\_S3)) { - // Return (Package (0x02) { 0x08, 0x03 }) - //} Else { - Return (Package (0x02) { 0x08, 0x01 }) - //} - } - Device (ETHR) { - Name (_ADR, 0x00010000) - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - //If (CondRefOf (\_S3)) { - // Return (Package (0x02) { 0x08, 0x03 }) - //} Else { - Return (Package (0x02) { 0x08, 0x01 }) - //} - } - } - Device (USB0) { - Name (_ADR, 0x00000000) - Method (_PSW, 1, NotSerialized) { // Power State Wake - And (GNBL, 0x7FFF, GNBL) - } - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - //If (CondRefOf (\_S3)) { - // Return (Package (0x02) { 0x0F, 0x03 }) - //} Else { - Return (Package (0x02) { 0x0F, 0x01 }) - //} - } - } - Device (USB1) { - Name (_ADR, 0x00000001) - Method (_PSW, 1, NotSerialized) { // Power State Wake - And (GNBL, 0x7FFF, GNBL) - } - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - //If (CondRefOf (\_S3)) { - // Return (Package (0x02) { 0x0F, 0x03 }) - //} Else { - Return (Package (0x02) { 0x0F, 0x01 }) - //} - } - } - Name (APIC, Package (0x0C) { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 6 - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 5 - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } - }) - Name (PICM, Package (0x0C) { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 6 - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 5 - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } - }) - Method (_PRT, 0, NotSerialized) { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } -} -Device (IDE0) { - Method (_ADR, 0, NotSerialized) { - Return (DADD(\_SB.PCI0.SBDN, 0x00010001)) - } - Name (REGF, 0x01) - Method (_REG, 2, NotSerialized) { - If (LEqual (Arg0, 0x02)) { - Store (Arg1, REGF) - } - } - OperationRegion (BAR0, PCI_Config, 0x00, 0x60) - Field (BAR0, ByteAcc, NoLock, Preserve) { - Offset (0x40), // EIDE Controller Configuration Register - SCEN, 1, // Secondary Channel Enable - PCEN, 1, // Primary Channel Enable - , 10, - SPWB, 1, // Secondary Port posted-write buffer for PIO modes enable - SRPB, 1, // RW (controls nothing) - PPWB, 1, // Primary Port posted-write buffer for PIO modes enable - PRPB, 1, // RW (controls nothing) - PM80, 1, // High-speed 80-pin cable enable Primary Master - PS80, 1, // High-speed 80-pin cable enable Primary Slave - SM80, 1, // High-speed 80-pin cable enable Secondary Master - SS80, 1, // High-speed 80-pin cable enable Secondary Slave - , 4, // RW (controls nothing) - Offset (0x48), - SSRT, 4, // - SSPW, 4, // - SMRT, 4, // - SMPW, 4, - PSRT, 4, - PSPW, 4, - PMRT, 4, - PMPW, 4, - SSAD, 2, - SMAD, 2, - PSAD, 2, - PMAD, 2, - Offset (0x4E), - SXRT, 4, - SXPW, 4, - PXRT, 4, - PXPW, 4, - SSUD, 8, - SMUD, 8, - PSUD, 8, - PMUD, 8, - PPDN, 1, - PPDS, 1, - , 2, - SPDN, 1, - SPDS, 1 - } - Name (TIM0, Package (0x06) { - Package (0x05) { - 0x78, - 0xB4, - 0xF0, - 0x0186, - 0x0258 - }, - Package (0x07) { - 0x78, - 0x5A, - 0x3C, - 0x2D, - 0x1E, - 0x14, - 0x0F - }, - Package (0x08) { - 0x04, - 0x03, - 0x02, - 0x01, - 0x00, - 0x00, - 0x00, - 0x00 - }, - Package (0x03) { - 0x02, - 0x01, - 0x00 - }, - Package (0x05) { - 0x20, - 0x22, - 0x42, - 0x65, - 0xA8 - }, - Package (0x07) { - 0xC2, - 0xC1, - 0xC0, - 0xC4, - 0xC5, - 0xC6, - 0xC7 - } - }) - Name (TMD0, Buffer (0x14) {}) - CreateDWordField (TMD0, 0x00, PIO0) - CreateDWordField (TMD0, 0x04, DMA0) - CreateDWordField (TMD0, 0x08, PIO1) - CreateDWordField (TMD0, 0x0C, DMA1) - CreateDWordField (TMD0, 0x10, CHNF) - Device (CHN0) { - Name (_ADR, 0x00) - Method (_STA, 0, NotSerialized) { - If (PCEN) { Return (0x0F) } - Else { Return (0x09) } - } - Method (_GTM, 0, NotSerialized) { - Return (GTM (PMPW, PMRT, PSPW, PSRT, PMUD, PSUD)) - } - Method (_STM, 3, NotSerialized) { - Store (Arg0, TMD0) - Store (STM (), Local0) - And (Local0, 0xFF, PSUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0xFF, PMUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0x0F, PSRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, PSPW) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, PMRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, PMPW) - Store (GTF (0x00, Arg1), ATA0) - Store (GTF (0x01, Arg2), ATA1) - } - Device (DRV0) { - Name (_ADR, 0x00) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA0)) - } - } - Device (DRV1) { - Name (_ADR, 0x01) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA1)) - } - } - } - Device (CHN1) { - Name (_ADR, 0x01) - Method (_STA, 0, NotSerialized) { - If (SCEN) { Return (0x0F) } - Else { Return (0x09) } - } - Method (_GTM, 0, NotSerialized) { - Return (GTM (SMPW, SMRT, SSPW, SSRT, SMUD, SSUD)) - } - Method (_STM, 3, NotSerialized) { - Store (Arg0, TMD0) - Store (STM (), Local0) - And (Local0, 0xFF, SSUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0xFF, SMUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0x0F, SSRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, SSPW) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, SMRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, SMPW) - Store (GTF (0x00, Arg1), ATA2) - Store (GTF (0x01, Arg2), ATA3) - } - Device (DRV0) { - Name (_ADR, 0x00) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA2)) - } - } - Device (DRV1) { - Name (_ADR, 0x01) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA3)) - } - } - } - Method (GTM, 6, Serialized) { - Store (Ones, PIO0) - Store (Ones, PIO1) - Store (Ones, DMA0) - Store (Ones, DMA1) - Store (0x1A, CHNF) - If (REGF) {} - Else { Return (TMD0) } - Add (Arg0, Arg1, Local0) - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, PIO0) - Add (Arg2, Arg3, Local0) - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, PIO1) - If (And (Arg4, 0x40)) { - Or (CHNF, 0x01, CHNF) - And (Arg4, 0x07, Local0) - If (LLess (Local0, 0x04)) { - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, DMA0) - } Else { - If (LEqual (Local0, 0x04)) { - Store (0x2D, DMA0) - } Else { - If (LEqual (Local0, 0x05)) { - Store (0x1E, DMA0) - } Else { - If (LEqual (Local0, 0x06)) { - Store (0x14, DMA0) - } Else { - If (LEqual (Local0, 0x07)) { - Store (0x0F, DMA0) - } Else { - Store (PIO0, DMA0) - } - } - } - } - } - } Else { - Store (PIO0, DMA0) - } - If (And (Arg5, 0x40)) { - Or (CHNF, 0x04, CHNF) - And (Arg5, 0x07, Local0) - If (LLess (Local0, 0x04)) { - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, DMA1) - } Else { - If (LEqual (Local0, 0x04)) { - Store (0x2D, DMA1) - } Else { - If (LEqual (Local0, 0x05)) { - Store (0x1E, DMA1) - } Else { - If (LEqual (Local0, 0x06)) { - Store (0x14, DMA1) - } Else { - If (LEqual (Local0, 0x07)) { - Store (0x0F, DMA0) - } Else { - Store (PIO1, DMA1) - } - } - } - } - } - } Else { - Store (PIO1, DMA1) - } - Return (TMD0) - } - Method (STM, 0, Serialized) { - If (REGF) {} - Else { Return (0xFFFFFFFF) } - If (LEqual (PIO0, 0xFFFFFFFF)) { - Store (0xA8, Local1) - } Else { - And (Match (DerefOf (Index (TIM0, 0x00)), - MGE, PIO0, MTR, - 0x00, 0x00), - 0x07, Local0) - Store (DerefOf (Index (DerefOf (Index (TIM0, 0x04)), Local0)), - Local1) - } - ShiftLeft (Local1, 0x08, Local1) - If (LEqual (PIO1, 0xFFFFFFFF)) { - Or (Local1, 0xA8, Local1) - } Else { - And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIO1, MTR, - 0x00, 0x00), 0x07, Local0) - Or (DerefOf (Index (DerefOf (Index (TIM0, 0x04)), Local0)), - Local1, Local1) - } - ShiftLeft (Local1, 0x08, Local1) - If (LEqual (DMA0, 0xFFFFFFFF)) { - Or (Local1, 0x03, Local1) - } Else { - If (And (CHNF, 0x01)) { - And (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMA0, MTR, - 0x00, 0x00), 0x07, Local0) - Or (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Local0)), - Local1, Local1) - } Else { - Or (Local1, 0x03, Local1) - } - } - ShiftLeft (Local1, 0x08, Local1) - If (LEqual (DMA1, 0xFFFFFFFF)) { - Or (Local1, 0x03, Local1) - } Else { - If (And (CHNF, 0x04)) { - And (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMA1, MTR, - 0x00, 0x00), 0x07, Local0) - Or (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Local0)), - Local1, Local1) - } Else { - Or (Local1, 0x03, Local1) - } - } - Return (Local1) - } - Name (AT01, Buffer (0x07) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0xEF - }) - Name (AT02, Buffer (0x07) { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90 - }) - Name (AT03, Buffer (0x07) { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6 - }) - Name (AT04, Buffer (0x07) { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91 - }) - Name (ATA0, Buffer (0x1D) {}) - Name (ATA1, Buffer (0x1D) {}) - Name (ATA2, Buffer (0x1D) {}) - Name (ATA3, Buffer (0x1D) {}) - Name (ATAB, Buffer (0x1D) {}) - CreateByteField (ATAB, 0x00, CMDC) - Method (GTFB, 3, Serialized) { - Multiply (CMDC, 0x38, Local0) - Add (Local0, 0x08, Local1) - CreateField (ATAB, Local1, 0x38, CMDX) - Multiply (CMDC, 0x07, Local0) - CreateByteField (ATAB, Add (Local0, 0x02), A001) - CreateByteField (ATAB, Add (Local0, 0x06), A005) - Store (Arg0, CMDX) - Store (Arg1, A001) - Store (Arg2, A005) - Increment (CMDC) - } - Method (GTF, 2, Serialized) { - Store (Arg1, Debug) - Store (0x00, CMDC) - Name (ID49, 0x0C00) - Name (ID59, 0x00) - Name (ID53, 0x04) - Name (ID63, 0x0F00) - Name (ID88, 0x0F00) - Name (IRDY, 0x01) - Name (PIOT, 0x00) - Name (DMAT, 0x00) - If (LEqual (SizeOf (Arg1), 0x0200)) { - CreateWordField (Arg1, 0x62, IW49) - Store (IW49, ID49) - CreateWordField (Arg1, 0x6A, IW53) - Store (IW53, ID53) - CreateWordField (Arg1, 0x7E, IW63) - Store (IW63, ID63) - CreateWordField (Arg1, 0x76, IW59) - Store (IW59, ID59) - CreateWordField (Arg1, 0xB0, IW88) - Store (IW88, ID88) - } - Store (0xA0, Local7) - If (Arg0) { - Store (0xB0, Local7) - And (CHNF, 0x08, IRDY) - If (And (CHNF, 0x10)) { - Store (PIO1, PIOT) - } Else { - Store (PIO0, PIOT) - } - If (And (CHNF, 0x04)) { - If (And (CHNF, 0x10)) { - Store (DMA1, DMAT) - } Else { - Store (DMA0, DMAT) - } - } Else { - Store (PIO1, DMAT) - } - } Else { - And (CHNF, 0x02, IRDY) - Store (PIO0, PIOT) - If (And (CHNF, 0x01)) { - Store (DMA0, DMAT) - } - } - If (LAnd (LAnd (And (ID53, 0x04), And (ID88, 0xFF00)), DMAT)) { - Store (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMAT, MTR, - 0x00, 0x00), Local1) - If (LGreater (Local1, 0x06)) { - Store (0x06, Local1) - } - GTFB (AT01, Or (0x40, Local1), Local7) - } Else { - If (LAnd (And (ID63, 0xFF00), PIOT)) { - And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIOT, MTR, - 0x00, 0x00), 0x07, Local0) - If (Local0) { - If (And (Local0, 0x04)) { - Store (0x02, Local0) - } Else { - Store (0x01, Local0) - } - } - Or (0x20, DerefOf (Index (DerefOf (Index (TIM0, 0x03)), Local0 - )), Local1) - GTFB (AT01, Local1, Local7) - } - } - If (IRDY) { - And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIOT, MTR, - 0x00, 0x00), 0x07, Local0) - Or (0x08, DerefOf (Index (DerefOf (Index (TIM0, 0x02)), Local0 - )), Local1) - GTFB (AT01, Local1, Local7) - } Else { - If (And (ID49, 0x0400)) { - GTFB (AT01, 0x01, Local7) - } - } - If (LAnd (And (ID59, 0x0100), And (ID59, 0xFF))) { - GTFB (AT03, And (ID59, 0xFF), Local7) - } - Store (ATAB, Debug) - Return (ATAB) - } - Method (RATA, 1, NotSerialized) { - CreateByteField (Arg0, 0x00, CMDN) - Multiply (CMDN, 0x38, Local0) - CreateField (Arg0, 0x08, Local0, RETB) - Store (RETB, Debug) - Return (RETB) - } -} -Device (PMF) { - // ACPI smbus it should be 0x00040003 if 8131 present - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010003)) - } - OperationRegion (BAR0, PCI_Config, 0x00, 0xff) - Field (BAR0, ByteAcc, NoLock, Preserve) { - Offset (0x56), - PIRA, 4, - PIRB, 4, - PIRC, 4, - PIRD, 4 - } - //OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) - //Field (TS3_, DWordAcc, NoLock, Preserve) { - // PTS3, 16 - //} -} diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl b/src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl deleted file mode 100644 index be2a1ffdb4..0000000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - */ -//AMD8111 isa - -Device (ISA) { - // lpc 0x00040000 - Method (_ADR, 0, NotSerialized) { - Return (DADD(\_SB.PCI0.SBDN, 0x00010000)) - } - /* - OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers - Field (PIRY, ByteAcc, NoLock, Preserve) { - Z000, 2, // Parallel Port Range - , 1, - ECP , 1, // ECP Enable - FDC1, 1, // Floppy Drive Controller 1 - FDC2, 1, // Floppy Drive Controller 2 - Offset (0x01), - Z001, 3, // Serial Port A Range - SAEN, 1, // Serial Post A Enabled - Z002, 3, // Serial Port B Range - SBEN, 1 // Serial Post B Enabled - } - */ - Device (PIC) { - Name (_HID, EisaId ("PNP0000")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) // Master Interrupt controller - IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) // Slave Interrupt controller - IRQ (Edge, ActiveHigh, Exclusive) {2} - }) - } - Device (DMA1) { - Name (_HID, EisaId ("PNP0200")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) // Slave DMA controller - IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) // DMA page registers - IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) // Master DMA controller - DMA (Compatibility, NotBusMaster, Transfer16) {4} - }) - } - Device (TMR) { - Name (_HID, EisaId ("PNP0100")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) // Programmable Interval timer - IRQ (Edge, ActiveHigh, Exclusive) {0} - }) - } - Device (RTC) { - Name (_HID, EisaId ("PNP0B00")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0070, 0x0070, 0x01, 0x04) // Realtime Clock and CMOS ram - IRQ (Edge, ActiveHigh, Exclusive) {8} - }) - } - Device (SPKR) { - Name (_HID, EisaId ("PNP0800")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) // PC speaker - }) - } - Device (COPR) { // Co-processor - Name (_HID, EisaId ("PNP0C04")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) // Floating point Error control - IRQ (Edge, ActiveHigh, Exclusive) {13} - }) - } - Device (SYSR) { // System control registers (?) - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x00) - Name (CRS, ResourceTemplate () { - IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) - IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) - IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) - IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) - IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) - IO (Decode16, 0x0074, 0x0074, 0x01, 0x0C) - IO (Decode16, 0x0080, 0x0080, 0x01, 0x01) - IO (Decode16, 0x0084, 0x0084, 0x01, 0x03) - IO (Decode16, 0x0088, 0x0088, 0x01, 0x01) - IO (Decode16, 0x008C, 0x008C, 0x01, 0x03) - IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) - IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) - IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) - // IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - // EISA defined level triggered interrupt control registers - IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) - // IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - // IO (Decode16, 0xDE00, 0xDE00, 0x00, 0x80) - // IO (Decode16, 0xDE80, 0xDE80, 0x00, 0x80) - IO (Decode16,0xDE00,0xDE00,0x00,0x80) - IO (Decode16,0xDE80,0xDE80,0x00,0x80) - // IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM - // IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) - IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0D) // PMBS block - IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0E) // SMBS block - IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0F) // GPBS block - }) - Method (_CRS, 0, NotSerialized) { - CreateWordField (CRS, \_SB.PCI0.ISA.SYSR._Y0D._MIN, GP00) - CreateWordField (CRS, \_SB.PCI0.ISA.SYSR._Y0D._MAX, GP01) - CreateByteField (CRS, \_SB.PCI0.ISA.SYSR._Y0D._LEN, GP0L) - Store (PMBS, GP00) - Store (PMBS, GP01) - Store (PMLN, GP0L) - If (SMBS) { - CreateWordField (CRS, \_SB.PCI0.ISA.SYSR._Y0E._MIN, GP10) - CreateWordField (CRS, \_SB.PCI0.ISA.SYSR._Y0E._MAX, GP11) - CreateByteField (CRS, \_SB.PCI0.ISA.SYSR._Y0E._LEN, GP1L) - Store (SMBS, GP10) - Store (SMBS, GP11) - Store (SMBL, GP1L) - } - If (GPBS) { - CreateWordField (CRS, \_SB.PCI0.ISA.SYSR._Y0F._MIN, GP20) - CreateWordField (CRS, \_SB.PCI0.ISA.SYSR._Y0F._MAX, GP21) - CreateByteField (CRS, \_SB.PCI0.ISA.SYSR._Y0F._LEN, GP2L) - Store (GPBS, GP20) - Store (GPBS, GP21) - Store (GPLN, GP2L) - } - Return (CRS) - } - } - Device (MEM) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - Method (_CRS, 0, Serialized) { - Name (BUF0, ResourceTemplate () { - Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF - Memory32Fixed (ReadWrite, 0x000C0000, 0x00010000) // video BIOS c0000-c8404 - Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC - Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM - Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC - Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - }) -// Read the Video Memory length - CreateDWordField (BUF0, 0x14, CLEN) - CreateDWordField (BUF0, 0x10, CBAS) - - ShiftLeft (VGA1, 0x09, Local0) - Store (Local0, CLEN) - - Return (BUF0) - } - } -#include "superio/winbond/w83627hf/acpi/superio.asl" -} diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl b/src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl deleted file mode 100644 index a09c576102..0000000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - */ -//AMD8111 pic LNKA B C D - -Device (LNKA) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - Method (_STA, 0, NotSerialized) { - If (LEqual (\_SB.PCI0.PMF.PIRA, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - Method (_PRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - Method (_DIS, 0, NotSerialized) { - Store (0x00, \_SB.PCI0.PMF.PIRA ) - } - - Method (_CRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (\_SB.PCI0.PMF.PIRA, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,\_SB.PCI0.PMF.PIRA) - } -} - -Device (LNKB) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) { - If (LEqual (\_SB.PCI0.PMF.PIRB, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) { - Store (0x00, \_SB.PCI0.PMF.PIRB ) - } - - Method (_CRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRA1) - CreateByteField (BUFB, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (\_SB.PCI0.PMF.PIRB, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,\_SB.PCI0.PMF.PIRB) - } -} - -Device (LNKC) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - Method (_STA, 0, NotSerialized) { - If (LEqual (\_SB.PCI0.PMF.PIRC, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) { - Store (0x00, \_SB.PCI0.PMF.PIRC ) - } - - Method (_CRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (\_SB.PCI0.PMF.PIRC, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,\_SB.PCI0.PMF.PIRC) - } -} - -Device (LNKD) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - Method (_STA, 0, NotSerialized) { - If (LEqual (\_SB.PCI0.PMF.PIRD, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - Method (_PRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - Method (_DIS, 0, NotSerialized) { - Store (0x00, \_SB.PCI0.PMF.PIRD ) - } - Method (_CRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRA1) - CreateByteField (BUFB, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (\_SB.PCI0.PMF.PIRD, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFB) - } - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,\_SB.PCI0.PMF.PIRD) - } -} diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8131.asl b/src/mainboard/hp/dl145_g1/acpi/amd8131.asl deleted file mode 100644 index 29808aabd9..0000000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8131.asl +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - */ - -Device (PG0A) { -/* 8131 pcix bridge 1 */ - Method (_ADR, 0, NotSerialized) { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - Method (_PRW, 0, NotSerialized) { - //If (CondRefOf (\_S3)) { - // Return (Package (0x02) { 0x29, 0x03 }) - //} Else { - Return (Package (0x02) { 0x29, 0x01 }) - //} - } - Name (APIC, Package (0x0c) { - // Slot 3 - PIRQ BCDA ---- verified - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 3 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, - // Slot 4 - PIRQ CDAB ---- verified - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1A }, //? - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x18 }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x19 }, - // Onboard NIC 1 - PIRQ DABC - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1B }, //? - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x18 }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x19 }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x1A }, - // NIC 2 - PIRQ ABCD -- verified - // Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x18 }, //? - // Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x19 }, - // Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x1A }, - // Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x1B }, - // SERIAL ATA - PIRQ BCDA - // Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x19 }, //? - // Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x1A }, - // Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x1B }, - // Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x18 } - }) - Name (PICM, Package (0x0c) { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 3 - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } - }) - Method (_PRT, 0, NotSerialized) { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } -} -Device (PG0B) { -/* 8131 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - Method (_PRW, 0, NotSerialized) { - //If (CondRefOf (\_S3)) { - // Return (Package (0x02) { 0x22, 0x03 }) - //} Else { - Return (Package (0x02) { 0x22, 0x01 }) - //} - } - Name (APIC, Package (0x04) { - // Slot A - PIRQ CDAB -- verfied - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F },// Slot 2 - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1C }, - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1D }, - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1E } - }) - Name (PICM, Package (0x04) { - Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },//Slot 2 - Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 } - }) - Method (_PRT, 0, NotSerialized) { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } -} diff --git a/src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl b/src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl deleted file mode 100644 index 021ee1f279..0000000000 --- a/src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl +++ /dev/null @@ -1,6 +0,0 @@ -/* - * Copyright (c) 2011, 2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include "amd8111.asl" //real SB at first -#include "amd8131.asl" diff --git a/src/mainboard/hp/dl145_g1/acpi_tables.c b/src/mainboard/hp/dl145_g1/acpi_tables.c deleted file mode 100644 index a464678036..0000000000 --- a/src/mainboard/hp/dl145_g1/acpi_tables.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Island Aruma ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - * - * Copyright (C) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Modified to work with hp/dl145_g1 - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include "mb_sysconf.h" -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write 8111 IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, - IO_APIC_ADDR, 0); - - /* Write all 8131 IOAPICs */ - { - struct device *dev; - struct resource *res; - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8131_1, - res->base, gsi_base ); - gsi_base+=4; - - } - } - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8131_2, - res->base, gsi_base ); - gsi_base+=4; - } - } - - - } - - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 0, 2, 5 ); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high*/ - - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, 5, 1); - /* 1: LINT1 connect to NMI */ - - - return current; -} diff --git a/src/mainboard/hp/dl145_g1/board_info.txt b/src/mainboard/hp/dl145_g1/board_info.txt deleted file mode 100644 index b06f119a91..0000000000 --- a/src/mainboard/hp/dl145_g1/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Category: server -Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00346784&prodTypeId=15351&prodSeriesId=3219755 -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y -Release year: 2004 diff --git a/src/mainboard/hp/dl145_g1/cmos.layout b/src/mainboard/hp/dl145_g1/cmos.layout deleted file mode 100644 index c4c90f697f..0000000000 --- a/src/mainboard/hp/dl145_g1/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/hp/dl145_g1/devicetree.cb b/src/mainboard/hp/dl145_g1/devicetree.cb deleted file mode 100644 index 2d4adee0f4..0000000000 --- a/src/mainboard/hp/dl145_g1/devicetree.cb +++ /dev/null @@ -1,141 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x7460 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end # link 0 - device pci 18.0 on end # link 1 - device pci 18.0 on # link 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on # PCIX Bridge A - # PCI-X expansion slot cards auto-detected here - end - device pci 0.1 on end # IOAPIC A - device pci 1.0 on # PCIX Bridge B - # On-board BCM5704 dual port ethernet chip auto-detected here - # Optional SCSI board also (?) - end - device pci 1.1 on end # IOAPIC B - device pci 2.0 off end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent of the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end # OHCI-based USB controller 0 - device pci 0.1 on end # OCHI-based USB controller 1 - device pci 0.2 on end # EHCI-based USB2 controller - device pci 1.0 off end # LAN Ethernet controller - #device pci 4.0 on end # VGA PCI-card (auto detected) - end - device pci 1.0 on # LPC Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - #io 0x60 = 0x3f0 - #irq 0x70 = 6 - #drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - #io 0x60 = 0x378 - #irq 0x70 = 7 - #drq 0x74 = 1 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - #io 0x60 = 0x2f8 - #irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - end - device pnp 2e.7 off # GAM_MIDI_GPIO1 - #io 0x60 = 0x201 - #io 0x62 = 0x330 - #irq 0x70 = 9 - end - device pnp 2e.8 on # GPIO2 (watchdog timer) - end - device pnp 2e.9 on # GPIO3 - end - device pnp 2e.a on # ACPI - end - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end # EIDE controller - device pci 1.2 on - chip drivers/generic/generic - device i2c 8 on end # Some HW-monitor/sensor? - end - end - device pci 1.2 on - chip drivers/i2c/i2cmux # Multplexed DIMM spd eeproms. - device i2c 18 on #0 pca9516 (?) - # Some dimms also listen to address 30-33 - # It's some kind of write-protect function - # The 50-53 addresses are the interesting ones. - chip drivers/generic/generic #dimm H0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm H0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm H0-2 - device i2c 52 on end - end - chip drivers/generic/generic #dimm H0-3 - device i2c 53 on end - end - end - device i2c 18 on #1 pca9516 (?) - chip drivers/generic/generic #dimm H1-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm H1-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm H1-2 - device i2c 52 on end - end - chip drivers/generic/generic #dimm H1-3 - device i2c 53 on end - end - end - end - end - device pci 1.2 on - chip drivers/generic/generic - device i2c 69 on end # Texas Instruments cdc960 clock synthesizer - end - end # SMBus 2.0 controller - device pci 1.3 on # System management registers (ACPI) - end # System management - #device pci 1.4 off end - device pci 1.5 off end # AC97 Audio - device pci 1.6 off end # AC97 Modem - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/hp/dl145_g1/dsdt.asl b/src/mainboard/hp/dl145_g1/dsdt.asl deleted file mode 100644 index bf9787dc79..0000000000 --- a/src/mainboard/hp/dl145_g1/dsdt.asl +++ /dev/null @@ -1,292 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) -{ - // Name (SPIO, 0x2E) // SuperIO (w83627hf) - Name (SPI2, 0x4E) // Unknown National Semiconductors (EPM3128A?) - Name (IO1B, 0x0680) // GPIO Base (?) - Name (IO1L, 0x80) - //Name (IO2B, 0x0295) // Hardware monitor - //Name (IO2L, 0x02) - Name (PMBS, 0x2000) // Power Management Base - Name (PMLN, 0xC0) // Power Management Length - Name (GPBS, 0x20C0) - Name (GPLN, 0x20) - Name (SMBS, 0x20E0) - Name (SMBL, 0x20) - -#define NO_W83627HF_FDC // don't expose the floppy disk controller -#define NO_W83627HF_FDC_ENUM // don't try to enumerate the connected floppy drives -#define NO_W83627HF_PPORT // don't expose the parallel port -//#define NO_W83627HF_UARTA // don't expose the first serial port -#define NO_W83627HF_UARTB // don't expose the second serial port (already hidden - // if UARTB is configured as IRDA port by firmware) -#define NO_W83627HF_IRDA // don't expose the IRDA port (already hidden if UARTB is - // configured as serial port by firmware) -#define NO_W83627HF_CIR // don't expose the Consumer Infrared functionality -//#define NO_W83627HF_KBC // don't expose the keyboard controller -//#define NO_W83627HF_PS2M // don't expose the PS/2 mouse functionality of the - // keyboard controller -#define NO_W83627HF_GAME // don't expose the game port -#define NO_W83627HF_MIDI // don't expose the MIDI port -// #define NO_W83627HF_HWMON // don't expose the hardware monitor as - // PnP "Motherboard Resource" -// Scope (\_PR) and relevant CPU? objects are auto-generated in SSDT - - Scope (\_SB) { // Root of the bus hierarchy - Device (PCI0) { // Top PCI device (AMD K8 Northbridge 1) - - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - - // The following symbols are assumed to be created by coreboot - External (BUSN) - External (PCIO) - External (MMIO) - External (SBLK) - External (CBST) - External (SBDN) - External (TOM1) // Top Of Memory 1 (low 4GB ?) - External (HCLK) // Hypertransport possible CLocK frequencies - External (HCDN) // Hypertransport Controller Device Numbers - - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180000) - //Name (_UID, 0x00) - Name (_UID, 0x01) - - Name (HCIN, 0x00) // HC1 - Method (_BBN, 0, NotSerialized) { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - Method (_CRS, 0, Serialized) { - Name (BUF0, ResourceTemplate () { - // PCI Configuration address space address/data - IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) - IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h - IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x8100, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x7F00,,, - , TypeStatic) //8100h-FFFFh - DWordMemory (ResourceProducer, PosDecode, - MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000C0000, // Address Range Minimum - 0x000CFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00010000,,, - , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh - Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x03AF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x03B0,,, - , TypeStatic) //0-CF7h - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x03E0, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0918,,, - , TypeStatic) //0-CF7h - }) - \_SB.OSVR () - CreateDWordField (BUF0, 0x3E, VLEN) - CreateDWordField (BUF0, 0x36, VMAX) - CreateDWordField (BUF0, 0x32, VMIN) - ShiftLeft (VGA1, 0x09, Local0) - Add (VMIN, Local0, VMAX) - Decrement (VMAX) - Store (Local0, VLEN) - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - #include "acpi/pci0_hc.asl" - } - Device (PCI1) { - Name (_HID, "PNP0A03") - Name (_ADR, 0x00190000) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) { - Return (\_SB.PCI0.CBST) - } - //Name (HCIN, 0x01) // HC2 - //Method (_BBN, 0, NotSerialized) { - // Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - //} - Name (_BBN, 0x00) - } - Device (PWRB) { - Name (_HID, EisaId ("PNP0C0C")) - Name (_UID, 0xAA) - Name (_STA, 0x0B) - } - } - Scope (_GPE) { - Method (_L08, 0, NotSerialized) { - Notify (\_SB.PCI0, 0x02) //PME# Wakeup - Notify (\_SB.PCI0.TP2P.ETHR, 0x02) - Notify (\_SB.PWRB, 0x02) - } - Method (_L0F, 0, NotSerialized) { - Notify (\_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup - Notify (\_SB.PCI0.TP2P.USB1, 0x02) - Notify (\_SB.PWRB, 0x02) - } - Method (_L22, 0, NotSerialized) { // GPIO18 (LID) - Pogo 0 Bridge B - Notify (\_SB.PCI0.PG0B, 0x02) - Notify (\_SB.PWRB, 0x02) - } - Method (_L29, 0, NotSerialized) { // GPIO25 (Suspend) - Pogo 0 Bridge A - Notify (\_SB.PCI0.PG0A, 0x02) - Notify (\_SB.PWRB, 0x02) - } - } - OperationRegion (KSB0, SystemIO, 0x72, 0x02) // CMOS RAM (?) - Field (KSB0, ByteAcc, NoLock, Preserve) { - KSBI, 8, // Index - KSBD, 8 // Data - } -/* - OperationRegion (IHHM, SystemIO, IO2B, IO2L) // Hardware monitor - Field (IHHM, ByteAcc, NoLock, Preserve) { - HHMI, 8, // Index - HHMD, 8 // Data - } -*/ - // Method (_BFS, 1, NotSerialized) { - // Control method executed immediately following a wake event. - // Arg0 => Value of the sleeping state from which woken (1=S1, 2=S2 ...) - // Optional - //} - - Method (_PTS, 1, NotSerialized) { - // Control method used to Prepare To Sleep. - // Arg0 => Value of the sleeping state (1=S1, 2=S2 ...) - Or (Arg0, 0xF0, Local0) - Store (Local0, DBG8) - } - - // Method (_GTS, 1, NotSerialized) { - // Control method executed just prior to setting the sleep enable (SLP_EN) bit. - // Arg0 => Value of the sleeping state (1=S1, 2=S2 ...) - // Optional - //} - - #include <southbridge/amd/amd8111/acpi/sleepstates.asl> - - Name (WAKP, Package (0x02) { 0x00, 0x00 }) - // Status - // 0: 0 Wake was signaled but failed due to lack of power. - // 1: 1 Wake was signaled but failed due to thermal condition - // 2:31 Reserved - // PSS - // 0:1f If non-zero, the effective S-state the power supply really entered. - - Method (_WAK, 1, NotSerialized) { - // System Wake - // Arg0: The value of the sleeping state from which woken (1=S1, ...) - // Result: (2 DWORD package) - ShiftLeft (Arg0, 0x04, DBG8) - Store (0xFF, KSBI) // Clear 0xFF in CMOS RAM - Store (0x00, KSBD) - If (LEqual (Arg0, 0x01)) { // Wake from S1 state - And (\_SB.PCI0.GSTS, 0x10, Local0) - And (Local0, \_SB.PCI0.GNBL, Local0) - If (Local0) { - Notify (\_SB.PWRB, 0x02) - } - } - Store (\_SB.PCI0.GSTS, Local0) - Store (Local0, \_SB.PCI0.GSTS) - Store (\_SB.PCI0.STMC, Local0) - Store (Local0, \_SB.PCI0.STMC) - Store (\_SB.PCI0.STC0, Local0) - Store (Local0, \_SB.PCI0.STC0) - Store (\_SB.PCI0.STC1, Local0) - Store (Local0, \_SB.PCI0.STC1) - Store (\_SB.PCI0.STHW, Local0) - Store (Local0, \_SB.PCI0.STHW) - If (LEqual (Arg0, 0x03)) { // Wake from S3 state - Notify (\_SB.PCI0.TP2P.USB0, 0x01) - } - Store (0xC0, \_SB.PCI0.SWSM) - If (DerefOf (Index (WAKP, 0x00))) { - Store (0x00, Index (WAKP, 0x01)) - } Else { - Store (Arg0, Index (WAKP, 0x01)) - } - Return (WAKP) - } - - Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode - Method (_PIC, 1, NotSerialized) { //PIC Flag and Interface Method - // Control method that conveys interrupt model in use to the system - // firmware. OS reports interrupt model in use. - // 0 => PIC Mode - // 1 => APIC Mode - // 2 => SAPIC Mode - // 3.. => Reserved - Store (Arg0, PICF) - } - OperationRegion (DEB8, SystemIO, 0x80, 0x01) - Field (DEB8, ByteAcc, Lock, Preserve) { - DBG8, 8 - } - OperationRegion (DEB9, SystemIO, 0x90, 0x01) - Field (DEB9, ByteAcc, Lock, Preserve) { - DBG9, 8 - } - OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) - Field (EXTM, WordAcc, Lock, Preserve) { - AMEM, 32 - } - OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) - Field (VGAM, ByteAcc, Lock, Preserve) { - VGA1, 8 // Video memory length (in 2k units?) - } - OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) - Field (GRAM, ByteAcc, Lock, Preserve) { - Offset (0x10), - FLG0, 8 - } - OperationRegion (Z007, SystemIO, 0x21, 0x01) - Field (Z007, ByteAcc, NoLock, Preserve) { - Z008, 8 - } - OperationRegion (Z009, SystemIO, 0xA1, 0x01) - Field (Z009, ByteAcc, NoLock, Preserve) { - Z00A, 8 - } - #include "northbridge/amd/amdk8/util.asl" -} diff --git a/src/mainboard/hp/dl145_g1/fadt.c b/src/mainboard/hp/dl145_g1/fadt.c deleted file mode 100644 index 877cb5b03b..0000000000 --- a/src/mainboard/hp/dl145_g1/fadt.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - * (C) Copyright 2005 Stefan Reinauer <stepan@openbios.org> - * Copyright (C) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> - -extern unsigned pm_base; /* pm_base should be set in sb ACPI */ - -void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ - - acpi_header_t *header=&(fadt->header); - - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt,0,sizeof(acpi_fadt_t)); - memcpy(header->signature,"FACP",4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id,OEM_ID,6); - memcpy(header->oem_table_id,"COREBOOT",8); - memcpy(header->asl_compiler_id,ASLC,4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl=(u32)facs; - fadt->dsdt= (u32)dsdt; - // 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server - fadt->preferred_pm_profile = 0x04; - fadt->sci_int = 9; - - // disable system management mode by setting to 0: - fadt->smi_cmd = 0;//pm_base+0x2f; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - fadt->pm1a_evt_blk = pm_base; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = pm_base+0x04; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = 0x0000; - fadt->pm_tmr_blk = pm_base+0x08; - fadt->gpe0_blk = pm_base+0x20; - fadt->gpe1_blk = pm_base+0xb0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 8; - fadt->gpe1_base = 16; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; // > 100 means system doesnt support C2 state - fadt->p_lvl3_lat = 1001; // > 1000 means system doesnt support C3 state - fadt->flush_size = 0; // ignored if wbindv = 1 in flags - fadt->flush_stride = 0; // ignored if wbindv = 1 in flags - fadt->duty_offset = 1; - fadt->duty_width = 3; // 0 means duty cycle not supported - // _alrm value 0 means RTC alarm feature not supported - fadt->day_alrm = 0; // 0x7d these have to be - fadt->mon_alrm = 0; // 0x7e added to cmos.layout - fadt->century = 0; // 0x7f to make rtc alrm work - fadt->iapc_boot_arch = - ACPI_FADT_LEGACY_DEVICES | - ACPI_FADT_8042 | - // ACPI_FADT_VGA_NOT_PRESENT | - // ACPI_FADT_MSI_NOT_SUPPORTED| - // ACPI_FADT_NO_PCIE_ASPM_CONTROL| - 0; - - fadt->res2 = 0; - - fadt->flags = - ACPI_FADT_WBINVD | - // ACPI_FADT_WBINVD_FLUSH | - ACPI_FADT_C1_SUPPORTED | - // ACPI_FADT_C2_MP_SUPPORTED | - // ACPI_FADT_POWER_BUTTON | - ACPI_FADT_SLEEP_BUTTON | - // ACPI_FADT_FIXED_RTC | - // ACPI_FADT_S4_RTC_WAKE | - // ACPI_FADT_32BIT_TIMER | - // ACPI_FADT_DOCKING_SUPPORTED| - // ACPI_FADT_RESET_REGISTER | - // ACPI_FADT_SEALED_CASE | - // ACPI_FADT_HEADLESS | - // ACPI_FADT_SLEEP_TYPE | - // ACPI_FADT_PCI_EXPRESS_WAKE | - // ACPI_FADT_PLATFORM_CLOCK | - // ACPI_FADT_S4_RTC_VALID | - // ACPI_FADT_REMOTE_POWER_ON | - // ACPI_FADT_APIC_CLUSTER | - // ACPI_FADT_APIC_PHYSICAL | - 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - - fadt->res3 = 0; - fadt->res4 = 0; - fadt->res5 = 0; - - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pm_base; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pm_base+4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pm_base+0x08; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pm_base+0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 64; - fadt->x_gpe1_blk.bit_offset = 16; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = pm_base+0xb0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/hp/dl145_g1/get_bus_conf.c b/src/mainboard/hp/dl145_g1/get_bus_conf.c deleted file mode 100644 index ef768245ad..0000000000 --- a/src/mainboard/hp/dl145_g1/get_bus_conf.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - struct mb_sysconf_t *m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn3 = sysconf.hcdn[0] & 0xff; - - m->bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_8111_0 = m->bus_8131_0; - - /* 8111 */ - dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) - m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - else - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", m->bus_8111_0); - - /* 8131-1 */ - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,0)); - if (dev) - m->bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - else - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", m->bus_8131_0); - - /* 8131-2 */ - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,0)); - if (dev) - m->bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - else - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", m->bus_8131_0); - - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_8111 = apicid_base+0; - m->apicid_8131_1 = apicid_base+1; - m->apicid_8131_2 = apicid_base+2; -} diff --git a/src/mainboard/hp/dl145_g1/irq_tables.c b/src/mainboard/hp/dl145_g1/irq_tables.c deleted file mode 100644 index 597acca7e6..0000000000 --- a/src/mainboard/hp/dl145_g1/irq_tables.c +++ /dev/null @@ -1,98 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m = sysconf.mb; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_8111_0; - pirq->rtr_devfn = ((sysconf.sbdn + 1) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn + 1) << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; -//pcix bridge -// write_pirq_info(pirq_info, m->bus_8131_0, (m->sbdn3 << 3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); -// pirq_info++; slot_num++; - - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/hp/dl145_g1/mb_sysconf.h b/src/mainboard/hp/dl145_g1/mb_sysconf.h deleted file mode 100644 index 3dfd5deb01..0000000000 --- a/src/mainboard/hp/dl145_g1/mb_sysconf.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_8131_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - - unsigned apicid_8111; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - - unsigned sbdn3; -}; - -#endif diff --git a/src/mainboard/hp/dl145_g1/mptable.c b/src/mainboard/hp/dl145_g1/mptable.c deleted file mode 100644 index 80ad79d7a0..0000000000 --- a/src/mainboard/hp/dl145_g1/mptable.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - struct mb_sysconf_t *m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, m->apicid_8111, 0x20, VIO_APIC_VADDR); - { - struct device *dev; - struct resource *res; - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8131_1, 0x20, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8131_2, 0x20, - res2mmio(res, 0, 0)); - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_8111, 0); - - // - // The commented-out lines are auto-detected on my servers. - // -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - // Integrated SMBus 2.0 - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|3, apicid_8111 , 0x15); - // Integrated AMD AC97 Audio - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|1, apicid_8111 , 0x11); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|2, apicid_8111 , 0x12); - // Integrated AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x4 <<2)|0, m->apicid_8111 , 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x0 <<2)|3, m->apicid_8111 , 0x13); - // On board ATI Rage XL - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x5 <<2)|0, apicid_8111 , 0x14); - // On board Broadcom nics - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|0, m->apicid_8131_2, 0x03); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|1, m->apicid_8131_2, 0x00); - // On board LSI SCSI - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x2 <<2)|0, apicid_8131_2, 0x02); - - // PCIX-133 Slot - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|0, m->apicid_8131_1, 0x01); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|1, apicid_8131_1, 0x02); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|2, apicid_8131_1, 0x03); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|3, apicid_8131_1, 0x04); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/hp/dl145_g1/resourcemap.c b/src/mainboard/hp/dl145_g1/resourcemap.c deleted file mode 100644 index 65a4610d15..0000000000 --- a/src/mainboard/hp/dl145_g1/resourcemap.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * DL145G1 needs a different resource map - * This file was originally copied from the tyan/s2881 coreboot mainboard. - * - * Copyright (c) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ - -static void setup_dl145g1_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - //PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000b20, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - //PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/hp/dl145_g1/romstage.c b/src/mainboard/hp/dl145_g1/romstage.c deleted file mode 100644 index e991dc6bda..0000000000 --- a/src/mainboard/hp/dl145_g1/romstage.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson <enok@lysator.liu.se> - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <delay.h> -#include <northbridge/amd/amdk8/amdk8.h> -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -unsigned get_sbdn(unsigned bus); - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines. */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 17); - } -} - -void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } -} - -#define SMBUS_HUB 0x18 - -void activate_spd_rom(const struct mem_controller *ctrl) -{ - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS = 1 and ABRT_STS = 1, so try another time*/ - i = 2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret != 0) && (i-->0)); - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - -static inline void change_i2c_mux(unsigned device) -{ - int ret, i; - printk(BIOS_DEBUG, "change_i2c_mux i=%02x\n", device); - i = 2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - printk(BIOS_DEBUG, "change_i2c_mux 1 ret=%08x\n", ret); - } while ((ret != 0) && (i-->0)); - ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); - printk(BIOS_DEBUG, "change_i2c_mux 2 ret=%08x\n", ret); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/amd/amd8111/early_ctrl.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "resourcemap.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#if IS_ENABLED(CONFIG_SET_FIDVID) -#include "cpu/amd/model_fxx/fidvid.c" -#endif - -#define RC0 ((1 << 1)<<8) -#define RC1 ((1 << 2)<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - //first node - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC1|DIMM0, RC1|DIMM2, 0, 0, - RC1|DIMM1, RC1|DIMM3, 0, 0, -#endif - }; - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx,sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_dl145g1_resource_map(); - - setup_coherent_ht_domain(); - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - ht_setup_chains_x(sysinfo); -#if IS_ENABLED(CONFIG_SET_FIDVID) - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - struct cpuid_result cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - { - /* Read FIDVID_STATUS */ - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } -#endif - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - enable_smbus(); - - int i; - for (i = 0; i < 2; i++) - activate_spd_rom(&sysinfo->ctrl[i]); - for (i = RC0; i <= RC1; i <<= 1) - change_i2c_mux(i); - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - memreset_setup(); -#if IS_ENABLED(CONFIG_SET_FIDVID) - init_timer(); // Need to use TMICT to synchronize FID/VID -#endif - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} diff --git a/src/mainboard/hp/dl145_g3/Kconfig b/src/mainboard/hp/dl145_g3/Kconfig deleted file mode 100644 index da20fb339e..0000000000 --- a/src/mainboard/hp/dl145_g3/Kconfig +++ /dev/null @@ -1,64 +0,0 @@ -if BOARD_HP_DL145_G3 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM21000 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_SERVERENGINES_PILOT - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default hp/dl145_g3 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config MAINBOARD_PART_NUMBER - string - default "ProLiant DL145 G3" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 15 - -endif # BOARD_HP_DL145_G3 diff --git a/src/mainboard/hp/dl145_g3/Kconfig.name b/src/mainboard/hp/dl145_g3/Kconfig.name deleted file mode 100644 index ebbc20fb94..0000000000 --- a/src/mainboard/hp/dl145_g3/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_HP_DL145_G3 - bool "ProLiant DL145 G3" diff --git a/src/mainboard/hp/dl145_g3/board_info.txt b/src/mainboard/hp/dl145_g3/board_info.txt deleted file mode 100644 index f6f701d4f5..0000000000 --- a/src/mainboard/hp/dl145_g3/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: server -Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00816835&lang=en&cc=us&taskId=101&prodSeriesId=3219755&prodTypeId=15351 -Release year: 2007 diff --git a/src/mainboard/hp/dl145_g3/cmos.layout b/src/mainboard/hp/dl145_g3/cmos.layout deleted file mode 100644 index 56ed652b97..0000000000 --- a/src/mainboard/hp/dl145_g3/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/hp/dl145_g3/devicetree.cb b/src/mainboard/hp/dl145_g3/devicetree.cb deleted file mode 100644 index b7f450ec06..0000000000 --- a/src/mainboard/hp/dl145_g3/devicetree.cb +++ /dev/null @@ -1,85 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - chip northbridge/amd/amdk8 # northbridge - device pci 18.0 on # devices on link 0 - chip southbridge/broadcom/bcm21000 # HT2100 - device pci 0.0 on - end # bridge to slot PCI-E 4x ?? - device pci 1.0 on - end - device pci 2.0 on - end # unused - device pci 3.0 on # bridge to slot PCI-E 16x ?? - end - device pci 4.0 on - end # unused - device pci 5.0 on - device pci 4.0 on end # BCM5715 NIC - device pci 4.1 on end # BCM5715 NIC - end - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PCI/PCI-X bridge 0x0104 - device pci e.0 on end # SATA 0x024a - end - device pci 1.0 on end # Legacy pci main 0x0205 - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.3 off # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.4 off end # SWC - device pnp 4e.5 off end # Mouse - device pnp 4e.6 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.7 off end # GPIO - device pnp 4e.f off end # XBUS - device pnp 4e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end # end superio - end # end pci 1.2 - device pci 1.3 off end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # VGA - end - end - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # amdk8 - - end #domain -end diff --git a/src/mainboard/hp/dl145_g3/get_bus_conf.c b/src/mainboard/hp/dl145_g3/get_bus_conf.c deleted file mode 100644 index fc9c104a6c..0000000000 --- a/src/mainboard/hp/dl145_g3/get_bus_conf.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - - - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev)); - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); - printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev)); - if (dev) - m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for (i = 1; i < 6; i++) { - dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); - if (dev) - m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - else - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); - } - - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - for (i = 0; i < 3; i++) - m->apicid_bcm5785[i] = apicid_base+i; -} diff --git a/src/mainboard/hp/dl145_g3/irq_tables.c b/src/mainboard/hp/dl145_g3/irq_tables.c deleted file mode 100644 index 6ec1fd8e79..0000000000 --- a/src/mainboard/hp/dl145_g3/irq_tables.c +++ /dev/null @@ -1,49 +0,0 @@ -#ifdef GETPIR -#include "pirq_routing.h" -#else -#include <arch/pirq_routing.h> -#endif - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x0, /* Where the interrupt router lies (bus) */ - (0x2 << 3)|0x4, - 0, /* IRQs devoted exclusively to PCI usage */ - 0, /* Vendor */ - 0, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x2a, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x18 << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge - {0x00,(0x02 << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 legacy southbridge - {0x00,(0x03 << 3)|0x0, {{0x02, 0x0400}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 usb - {0x00,(0x04 << 3)|0x0, {{0x18, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // VGA Contr - {0x00,(0x01 << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 pci/pci-x bridge - {0x01,(0x0e << 3)|0x0, {{0x08, 0x00a0}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom BCM5785 [HT1000] SATA - {0x01,(0x0d << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5785 [HT1000] PCI/PCI-X Bridge - //{0x02,(0x01 << 3)|0x0, {{0x11, 0x08a8}, {0x12, 0x08a8}, {0x13, 0x08a8}, {0x14, 0x008a8}}, 0x2, 0x0}, - {0x00,(0x06 << 3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - //{0x03,(0x00 << 3)|0x0, {{0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x008a8}}, 0x1, 0x0}, - {0x00,(0x07 << 3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - {0x00,(0x08 << 3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - {0x00,(0x09 << 3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - //{0x06,(0x00 << 3)|0x0, {{0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x008a8}}, 0x2, 0x0}, - {0x00,(0x0a << 3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - //{0x07,(0x00 << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, - {0x08,(0x04 << 3)|0x0, {{0x25, 0x08a8}, {0x25, 0x08a8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5715 Gigabit Ethernet - {0x00,(0x18 << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge - //{0x10,(0x01 << 3)|0x0, {{0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x08000}}, 0x1, 0x0}, - {0x40,(0x01 << 3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // HTX slot - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/hp/dl145_g3/mb_sysconf.h b/src/mainboard/hp/dl145_g3/mb_sysconf.h deleted file mode 100644 index 8b0e580057..0000000000 --- a/src/mainboard/hp/dl145_g3/mb_sysconf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler <pdegler@rumms.uni-mannheim.e> for Uni of Mannheim - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle <nuessle@uni-hd.de> for Uni of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/hp/dl145_g3/mptable.c b/src/mainboard/hp/dl145_g3/mptable.c deleted file mode 100644 index a6cdfb83d0..0000000000 --- a/src/mainboard/hp/dl145_g3/mptable.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biederman <ebiderman@lnxi.com> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler <pdegler@rumms.uni-mannheim.e> for Uni of Mannheim - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle <nuessle@uni-hd.de> for Uni of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - - /*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev = NULL; - int i; - struct resource *res; - for (i = 0; i < 3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - printk(BIOS_DEBUG, "APIC %d base address: %llx\n",m->apicid_bcm5785[i], res->base); - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, - res2mmio(res, 0, 0)); - } - } - } - - } - - /* IRQ routing as factory BIOS */ - outb(0x01, 0xc00); outb(0x0A, 0xc01); - outb(0x17, 0xc00); outb(0x05, 0xc01); -/* outb(0x2E, 0xc00); outb(0x0B, 0xc01); */ -/* outb(0x07, 0xc00); outb(0x07, 0xc01); */ - outb(0x07, 0xc00); outb(0x0b, 0xc01); - - outb(0x24, 0xc00); outb(0x05, 0xc01); - //outb(0x00, 0xc00); outb(0x09, 0xc01); - outb(0x02, 0xc00); outb(0x0E, 0xc01); - - // 8259 registers... - outb(0xa0, 0x4d0); - outb(0x0e, 0x4d1); - - { - struct device *dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x64); - dword |= (1 << 30); // GEVENT14-21 used as PCI IRQ0-7 - pci_write_config32(dev, 0x64, dword); - } - // set GEVENT pins to NO OP - outb(0x33, 0xcd6); outb(0x00, 0xcd7); - outb(0x34, 0xcd6); outb(0x00, 0xcd7); - outb(0x35, 0xcd6); outb(0x00, 0xcd7); - } - - // hide XIOAPIC PCI configuration space - { - struct device *dev; - dev = dev_find_device(0x1166, 0x205, 0); - if (dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x64); - dword |= (1 << 26); - pci_write_config32(dev, 0x64, dword); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); - - //SATA -/* printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0x7); */ -/* smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0x7); */ - printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xb); - //USB - printk(BIOS_DEBUG, "sysconf.sbdn: %d on bus: %x\n",sysconf.sbdn, m->bus_bcm5785_0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x03 << 2)|0, m->apicid_bcm5785[0], 0xa); - - //VGA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x4 << 2)|0, m->apicid_bcm5785[1], 0x7); - - //PCIE - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6 << 2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7 << 2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8 << 2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9 << 2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa << 2)|0, m->apicid_bcm5785[2], 0xe); - - //IDE -// outb(0x02, 0xc00); outb(0x0e, 0xc01); -// printk(BIOS_DEBUG, "MPTABLE_IDE: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); -// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, (0x02 << 2)|1, m->apicid_bcm5785[0], 0xe); - - //onboard Broadcom GbE - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4 << 2)|0, m->apicid_bcm5785[2], 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4 << 2)|1, m->apicid_bcm5785[2], 0x4); - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - struct device *dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1 << 4); // enable interrupts - printk(BIOS_DEBUG, "6ch: %x\n",dword); - pci_write_config32(dev, 0x6c, dword); - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - printk(BIOS_DEBUG, "bus_isa is: %x\n", bus_isa); - mptable_lintsrc(mc, bus_isa); - - //extended table entries - smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80); - smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006); - smp_write_bus_hierarchy(mc, 9, 0x01, 0); - smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0); - smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1); - - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/hp/dl145_g3/romstage.c b/src/mainboard/hp/dl145_g3/romstage.c deleted file mode 100644 index 1b25e8cd90..0000000000 --- a/src/mainboard/hp/dl145_g3/romstage.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler <pdegler@rumms.uni-mannheim.de> for University of Mannheim - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle <nuessle@uni-heidelberg.de> for University of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/serverengines/pilot/pilot.h> -#include <superio/nsc/pc87417/pc87417.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) -#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/broadcom/bcm5785/early_setup.c" -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include <spd.h> -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#if 0 -#include "ipmi.c" - -static void setup_early_ipmi_serial() -{ - unsigned char result; - char channel_access[]={0x06 << 2,0x40,0x04,0x80,0x05}; - char serialmodem_conf[]={0x0c << 2,0x10,0x04,0x08,0x00,0x0f}; - char serial_mux1[]={0x0c << 2,0x12,0x04,0x06}; - char serial_mux2[]={0x0c << 2,0x12,0x04,0x03}; - char serial_mux3[]={0x0c << 2,0x12,0x04,0x07}; - -// earlydbg(0x0d); - //set channel access system only - ipmi_request(5,channel_access); -// earlydbg(result); -/* - //Set serial/modem config - result = ipmi_request(6,serialmodem_conf); - earlydbg(result); - - //Set serial mux 1 - result = ipmi_request(4,serial_mux1); - earlydbg(result); - - //Set serial mux 2 - result = ipmi_request(4,serial_mux2); - earlydbg(result); - - //Set serial mux 3 - result = ipmi_request(4,serial_mux3); - earlydbg(result); -*/ -// earlydbg(0x0e); - -} -#endif - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - pc87417_enable_dev(RTC_DEV); /* Enable RTC */ - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -// setup_early_ipmi_serial(); - pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - bcm5785_early_setup(); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x %08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x %08x\n", msr.hi, msr.lo); - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - // init_timer(); // Need to use TMICT to synchronize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/iwill/Kconfig b/src/mainboard/iwill/Kconfig deleted file mode 100644 index 75fa626b60..0000000000 --- a/src/mainboard/iwill/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_IWILL - -choice - prompt "Mainboard model" - -source "src/mainboard/iwill/*/Kconfig.name" - -endchoice - -source "src/mainboard/iwill/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "IWILL" - -endif # VENDOR_IWILL diff --git a/src/mainboard/iwill/Kconfig.name b/src/mainboard/iwill/Kconfig.name deleted file mode 100644 index 026608bec6..0000000000 --- a/src/mainboard/iwill/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_IWILL - bool "IWILL" diff --git a/src/mainboard/iwill/dk8_htx/Kconfig b/src/mainboard/iwill/dk8_htx/Kconfig deleted file mode 100644 index 929f47f540..0000000000 --- a/src/mainboard/iwill/dk8_htx/Kconfig +++ /dev/null @@ -1,54 +0,0 @@ -if BOARD_IWILL_DK8_HTX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_WINBOND_W83627HF - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default iwill/dk8_htx - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "DK8-HTX" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x6 - -config HT_CHAIN_UNITID_BASE - hex - default 0xa - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_IWILL_DK8_HTX diff --git a/src/mainboard/iwill/dk8_htx/Kconfig.name b/src/mainboard/iwill/dk8_htx/Kconfig.name deleted file mode 100644 index 8d81fc199d..0000000000 --- a/src/mainboard/iwill/dk8_htx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_IWILL_DK8_HTX - bool "DK8-HTX" diff --git a/src/mainboard/iwill/dk8_htx/Makefile.inc b/src/mainboard/iwill/dk8_htx/Makefile.inc deleted file mode 100644 index e826e8153a..0000000000 --- a/src/mainboard/iwill/dk8_htx/Makefile.inc +++ /dev/null @@ -1,4 +0,0 @@ -$(eval $(call asl_template,ssdt2)) -$(eval $(call asl_template,ssdt3)) -$(eval $(call asl_template,ssdt4)) -$(eval $(call asl_template,ssdt5)) diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8111.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8111.asl deleted file mode 100644 index df722f8862..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8111.asl +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright 2005 AMD - */ -//AMD8111 - Name (APIC, Package (0x04) - { - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} - }) - - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00}, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00}, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00}, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00} - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0) - // Update the Device Number according to SBDN - Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) - - Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { - Return (PICM) - } - Else { - Return (APIC) - } - } - - Device (SBC3) - { - /* ACPI smbus it should be 0x00040003 if 8131 present */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010003)) - } - OperationRegion (PIRQ, PCI_Config, 0x56, 0x02) - Field (PIRQ, ByteAcc, Lock, Preserve) - { - PIBA, 8, - PIDC, 8 - } -/* - OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) - Field (TS3_, DWordAcc, NoLock, Preserve) - { - PTS3, 16 - } -*/ - } - - Device (HPET) - { - Name (HPT, 0x00) - Name (_HID, EisaId ("PNP0103")) - Name (_UID, 0x00) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) - }) - Return (BUF0) - } - } - - #include "amd8111_pic.asl" - - #include "amd8111_isa.asl" - - Device (TP2P) - { - /* 8111 P2P and it should 0x00030000 when 8131 present*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x08, 0x03 }) } - Else { Return (Package (0x02) { 0x08, 0x01 }) } - } - - Device (USB0) - { - Name (_ADR, 0x00000000) - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x0F, 0x03 }) } - Else { Return (Package (0x02) { 0x0F, 0x01 }) } - } - } - - Device (USB1) - { - Name (_ADR, 0x00000001) - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x0F, 0x03 }) } - Else { Return (Package (0x02) { 0x0F, 0x01 }) } - } - } - - Name (APIC, Package (0x0C) - { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 6 - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, - - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 5 - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } - }) - - Name (PICM, Package (0x0C) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 6 - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 5 - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } - }) - - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8111_isa.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8111_isa.asl deleted file mode 100644 index 6054b53d5e..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8111_isa.asl +++ /dev/null @@ -1,178 +0,0 @@ -#include <arch/ioapic.h> -#include <cpu/x86/lapic_def.h> - -/* - * Copyright 2005 AMD - */ -//AMD8111 isa - - Device (ISA) - { - /* lpc 0x00040000 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(\_SB.PCI0.SBDN, 0x00010000)) - } - - OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers - Field (PIRY, ByteAcc, NoLock, Preserve) - { - Z000, 2, // Parallel Port Range - , 1, - ECP, 1, // ECP Enable - FDC1, 1, // Floppy Drive Controller 1 - FDC2, 1, // Floppy Drive Controller 2 - Offset (0x01), - Z001, 3, // Serial Port A Range - SAEN, 1, // Serial Post A Enabled - Z002, 3, // Serial Port B Range - SBEN, 1 // Serial Post B Enabled - } - - Device (PIC) - { - Name (_HID, EisaId ("PNP0000")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) - IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) - IRQ (Edge, ActiveHigh, Exclusive) {2} - }) - } - - Device (DMA1) - { - Name (_HID, EisaId ("PNP0200")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) - IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) - IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) - DMA (Compatibility, NotBusMaster, Transfer16) {4} - }) - } - - Device (TMR) - { - Name (_HID, EisaId ("PNP0100")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) - IRQ (Edge, ActiveHigh, Exclusive) {0} - }) - } - - Device (RTC) - { - Name (_HID, EisaId ("PNP0B00")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0070, 0x0070, 0x01, 0x06) - IRQ (Edge, ActiveHigh, Exclusive) {8} - }) - } - - Device (SPKR) - { - Name (_HID, EisaId ("PNP0800")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) - }) - } - - Device (COPR) - { - Name (_HID, EisaId ("PNP0C04")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) - IRQ (Edge, ActiveHigh, Exclusive) {13} - }) - } - - Device (SYSR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x00) - Name (SYR1, ResourceTemplate () - { - IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM - IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM - IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) - IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) - IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) - IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) - IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) - IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) - IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A) - IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) - IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) - IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) - IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - }) - Method (_CRS, 0, NotSerialized) - { - Return (SYR1) - } - } - - Device (MEM) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF - Memory32Fixed (ReadWrite, 0x000C0000, 0x00010000) // video BIOS c0000-c8404 - Memory32Fixed (ReadWrite, IO_APIC_ADDR, 0x00001000) - Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM - Memory32Fixed (ReadWrite, LOCAL_APIC_ADDR, 0x00001000) - Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS - }) - // Read the Video Memory length - CreateDWordField (BUF0, 0x14, CLEN) - CreateDWordField (BUF0, 0x10, CBAS) - - ShiftLeft (VGA1, 0x09, Local0) - Store (Local0, CLEN) - - Return (BUF0) - } - } - - Device (PS2M) - { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () - { - IRQNoFlags () {12} - }) - Method (_STA, 0, NotSerialized) - { - And (FLG0, 0x04, Local0) - If (LEqual (Local0, 0x04)) { Return (0x0F) } - Else { Return (0x00) } - } - } - - Device (PS2K) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - } - #include "superio.asl" - - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8111_pic.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8111_pic.asl deleted file mode 100644 index fd1df7d034..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8111_pic.asl +++ /dev/null @@ -1,354 +0,0 @@ -/* - * Copyright 2005 AMD - */ -//AMD8111 pic LNKA B C D - - Device (LNKA) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1) - If (LNot (LEqual (Local1, 0x00))) - { // Routing enable - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA) - Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) - } - } - - Device (LNKB) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRB1) - CreateByteField (Arg0, 0x02, IRB2) - ShiftLeft (IRB2, 0x08, Local0) - Or (Local0, IRB1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA) - ShiftLeft (Local1, 0x04, Local1) - Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA) - } - } - - Device (LNKC) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC) - Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) - } - } - - Device (LNKD) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - Method (_STA, 0, NotSerialized) - { - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local0) - If (LEqual (Local0, 0x00)) { Return (0x09) } - Else { Return (0x0B) } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) - { - Store (0x01, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local1) - } - - ShiftLeft (Local3, Local1, Local3) - Not (Local3, Local3) - And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNot (LEqual (Local1, 0x00))) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) - { - CreateByteField (Arg0, 0x01, IRB1) - CreateByteField (Arg0, 0x02, IRB2) - ShiftLeft (IRB2, 0x08, Local0) - Or (Local0, IRB1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) - { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - - And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC) - ShiftLeft (Local1, 0x04, Local1) - Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC) - } - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8131.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8131.asl deleted file mode 100644 index 6d93e02048..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8131.asl +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright 2005 AMD - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x14) - { - // Slot 3 - PIRQ BCDA ---- verified - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 3 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, - - //Slot 4 - PIRQ CDAB ---- verified - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1A }, //? - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x18 }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x19 }, - - //Onboard NIC 1 - PIRQ DABC - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1B }, //? - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x18 }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x19 }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x1A }, - - // NIC 2 - PIRQ ABCD -- verified - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x18 }, //? - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x1B }, - - //SERIAL ATA - PIRQ BCDA - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x19 }, //? - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x18 } - }) - Name (PICM, Package (0x14) - { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 3 - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - - Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ CDAB -- verfied - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1E },// Slot 2 - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1F }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1C }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1D } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },//Slot 2 - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8131_2.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8131_2.asl deleted file mode 100644 index 6eb95ec724..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8131_2.asl +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright 2005 AMD - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ BCDA - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x0018 }, //Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0019 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x001A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x001B }, - - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ ABCD - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x001F },// Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0020 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x0021 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x0022 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8132_2.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8132_2.asl deleted file mode 100644 index 9c0629f779..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8132_2.asl +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright 2005 AMD - */ - - Device (PG0A) - { - /* 8132 pcix bridge*/ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ BCDA - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x0018 }, //Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0019 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x001A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x001B }, - - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 2 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } - - Device (PG0B) - { - /* 8132 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x22, 0x03 }) } - Else { Return (Package (0x02) { 0x22, 0x01 }) } - } - - Name (APIC, Package (0x04) - { - // Slot A - PIRQ ABCD - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x001F },// Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0020 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x0021 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x0022 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1 - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - - Name (DNCG, Ones) - - Method (_PRT, 0, NotSerialized) - { - If (LEqual (^DNCG, Ones)) { - Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14 - Store (0x00, Local1) - While (LLess (Local1, 0x04)) - { - // Update the GSI according to HCIN - Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0) - Add(Local2, Local0, Local0) - Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3)) - Increment (Local1) - } - - Store (0x00, ^DNCG) - - } - - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/amd8151.asl b/src/mainboard/iwill/dk8_htx/acpi/amd8151.asl deleted file mode 100644 index 995aa10475..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/amd8151.asl +++ /dev/null @@ -1,28 +0,0 @@ -// AMD8151 - Device (AGPB) - { - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - - Name (APIC, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 } - }) - Name (PICM, Package (0x04) - { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 } - }) - Method (_PRT, 0, NotSerialized) - { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/htx_no_ioapic.asl b/src/mainboard/iwill/dk8_htx/acpi/htx_no_ioapic.asl deleted file mode 100644 index 7301fef998..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/htx_no_ioapic.asl +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2006 AMD - */ - - Device (HTXA) - { - /* HTX */ - Method (_ADR, 0, NotSerialized) - { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - - Method (_PRW, 0, NotSerialized) - { - If (CondRefOf (\_S3)) { Return (Package (0x02) { 0x29, 0x03 }) } - Else { Return (Package (0x02) { 0x29, 0x01 }) } - } - - } diff --git a/src/mainboard/iwill/dk8_htx/acpi/pci0_hc.asl b/src/mainboard/iwill/dk8_htx/acpi/pci0_hc.asl deleted file mode 100644 index 2fd3b09de4..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/pci0_hc.asl +++ /dev/null @@ -1,2 +0,0 @@ - #include "amd8111.asl" //real SB at first - #include "amd8131.asl" diff --git a/src/mainboard/iwill/dk8_htx/acpi/pci2_hc.asl b/src/mainboard/iwill/dk8_htx/acpi/pci2_hc.asl deleted file mode 100644 index fd3ad2c3e3..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/pci2_hc.asl +++ /dev/null @@ -1 +0,0 @@ - #include "amd8132_2.asl" diff --git a/src/mainboard/iwill/dk8_htx/acpi/pci3_hc.asl b/src/mainboard/iwill/dk8_htx/acpi/pci3_hc.asl deleted file mode 100644 index 070ebe5286..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/pci3_hc.asl +++ /dev/null @@ -1 +0,0 @@ - #include "amd8151.asl" diff --git a/src/mainboard/iwill/dk8_htx/acpi/pci4_hc.asl b/src/mainboard/iwill/dk8_htx/acpi/pci4_hc.asl deleted file mode 100644 index bd3f70ea0f..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/pci4_hc.asl +++ /dev/null @@ -1 +0,0 @@ - #include "amd8131_2.asl" diff --git a/src/mainboard/iwill/dk8_htx/acpi/pci5_hc.asl b/src/mainboard/iwill/dk8_htx/acpi/pci5_hc.asl deleted file mode 100644 index f7f0a7dbad..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/pci5_hc.asl +++ /dev/null @@ -1 +0,0 @@ - #include "htx_no_ioapic.asl" diff --git a/src/mainboard/iwill/dk8_htx/acpi/superio.asl b/src/mainboard/iwill/dk8_htx/acpi/superio.asl deleted file mode 100644 index 83ee58253d..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -// #include "w83627hf.asl" diff --git a/src/mainboard/iwill/dk8_htx/acpi_tables.c b/src/mainboard/iwill/dk8_htx/acpi_tables.c deleted file mode 100644 index 957be79ca3..0000000000 --- a/src/mainboard/iwill/dk8_htx/acpi_tables.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Island Aruma ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include "mb_sysconf.h" -#include "mainboard.h" -#include <cbfs.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write 8111 IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, - IO_APIC_ADDR, 0); - - /* Write all 8131 IOAPICs */ - { - struct device *dev; - struct resource *res; - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1, - res->base, gsi_base ); - gsi_base+=4; - - } - } - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2, - res->base, gsi_base ); - gsi_base+=4; - } - } - - int i; - int j = 0; - - for(i = 1; i< sysconf.hc_possible_num; i++) { - unsigned d = 0; - if(!(sysconf.pci1234[i] & 0x1) ) continue; - // 8131 need to use +4 - - switch (sysconf.hcid[i]) { - case 1: - d = 7; - break; - case 3: - d = 4; - break; - } - switch (sysconf.hcid[i]) { - case 1: - case 3: - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0], - res->base, gsi_base ); - gsi_base+=d; - } - } - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1], - res->base, gsi_base ); - gsi_base+=d; - - } - } - break; - } - - j++; - } - - } - - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 0, 2, 5 ); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high*/ - - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, 5, 1); - /* 1: LINT1 connect to NMI */ - - - return current; -} - -unsigned long mainboard_write_acpi_tables(struct device *device, - unsigned long start, - acpi_rsdp_t *rsdp) -{ - unsigned long current; - acpi_header_t *ssdtx; - const void *p; - size_t p_size; - - int i; - - get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn - - /* Align ACPI tables to 16byte */ - start = ALIGN(start, 16); - current = start; - - //same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table - - for(i = 1; i < sysconf.hc_possible_num; i++) { // 0: is hc sblink - const char *file_name; - if((sysconf.pci1234[i] & 1) != 1 ) continue; - uint8_t c; - if(i < 7) { - c = (uint8_t) ('4' + i - 1); - } - else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt - current = ALIGN(current, 8); - ssdtx = (acpi_header_t *)current; - switch(sysconf.hcid[i]) { - case 1: //8132 - file_name = CONFIG_CBFS_PREFIX "/ssdt2.aml"; - break; - case 2: //8151 - file_name = CONFIG_CBFS_PREFIX "/ssdt3.aml"; - break; - case 3: //8131 - file_name = CONFIG_CBFS_PREFIX "/ssdt4.aml"; - break; - default: - //HTX no io apic - file_name = CONFIG_CBFS_PREFIX "/ssdt5.aml"; - break; - } - p = cbfs_boot_map_with_leak( - file_name, - CBFS_TYPE_RAW, &p_size); - if (!p || p_size < sizeof(acpi_header_t)) - continue; - - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((unsigned char *)ssdtx,ssdtx->length); - acpi_add_table(rsdp,ssdtx); - } - - return current; -} diff --git a/src/mainboard/iwill/dk8_htx/board_info.txt b/src/mainboard/iwill/dk8_htx/board_info.txt deleted file mode 100644 index 4211c8d532..0000000000 --- a/src/mainboard/iwill/dk8_htx/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: server -Board URL: http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.asp?p_id=98 -Flashrom support: y diff --git a/src/mainboard/iwill/dk8_htx/cmos.layout b/src/mainboard/iwill/dk8_htx/cmos.layout deleted file mode 100644 index 56ed652b97..0000000000 --- a/src/mainboard/iwill/dk8_htx/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/iwill/dk8_htx/devicetree.cb b/src/mainboard/iwill/dk8_htx/devicetree.cb deleted file mode 100644 index c49c97a048..0000000000 --- a/src/mainboard/iwill/dk8_htx/devicetree.cb +++ /dev/null @@ -1,117 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # northbridge - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 on # GPIO2 - io 0x07 = 0x08ff - io 0x30 = 0x01ff - io 0x2b = 0xd0ff - io 0xf0 = 0xef16 - end - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # acpi - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - - end #domain -end diff --git a/src/mainboard/iwill/dk8_htx/dsdt.asl b/src/mainboard/iwill/dk8_htx/dsdt.asl deleted file mode 100644 index e1e6341a72..0000000000 --- a/src/mainboard/iwill/dk8_htx/dsdt.asl +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_PR) - { - Processor (CPU0, 0x00, 0x0000C010, 0x06) {} - Processor (CPU1, 0x01, 0x00000000, 0x00) {} - Processor (CPU2, 0x02, 0x00000000, 0x00) {} - Processor (CPU3, 0x03, 0x00000000, 0x00) {} - - } - - Method (FWSO, 0, NotSerialized) { } - - Scope (_SB) - { - Device (PCI0) - { - /* BUS0 root bus */ - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - External (CBST) - - - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180000) - Name (_UID, 0x01) - - Name (HCIN, 0x00) // HC1 - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh - IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h - IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x8100, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x7F00,,, - , TypeStatic) //8100h-FFFFh - - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000C0000, // Address Range Minimum - 0x000CFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00010000,,, - , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh - - Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x03AF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x03B0,,, - , TypeStatic) //0-CF7h - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x03E0, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0918,,, - , TypeStatic) //0-CF7h - }) - \_SB.OSVR () - CreateDWordField (BUF0, 0x3E, VLEN) - CreateDWordField (BUF0, 0x36, VMAX) - CreateDWordField (BUF0, 0x32, VMIN) - ShiftLeft (VGA1, 0x09, Local0) - Add (VMIN, Local0, VMAX) - Decrement (VMAX) - Store (Local0, VLEN) - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci0_hc.asl" - - } - Device (PCI1) - { - Name (_HID, "PNP0A03") - Name (_ADR, 0x00000000) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - Return (\_SB.PCI0.CBST) - } - Name (_BBN, 0x00) - } - - - } - - Scope (_GPE) - { - Method (_L08, 0, NotSerialized) - { - Notify (\_SB.PCI0, 0x02) //PME# Wakeup - } - - Method (_L0F, 0, NotSerialized) - { - Notify (\_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup - } - - Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B - { - Notify (\_SB.PCI0.PG0B, 0x02) - } - - Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A - { - Notify (\_SB.PCI0.PG0A, 0x02) - } - } - - Method (_PTS, 1, NotSerialized) - { - Or (Arg0, 0xF0, Local0) - Store (Local0, DBG1) - } -/* - Method (_WAK, 1, NotSerialized) - { - Or (Arg0, 0xE0, Local0) - Store (Local0, DBG1) - } -*/ - Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode - Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method - { - Store (Arg0, PICF) - } - - OperationRegion (DEBG, SystemIO, 0x80, 0x01) - Field (DEBG, ByteAcc, Lock, Preserve) - { - DBG1, 8 - } - - OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) - Field (EXTM, WordAcc, Lock, Preserve) - { - AMEM, 32 - } - - OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) - Field (VGAM, ByteAcc, Lock, Preserve) - { - VGA1, 8 - } - - OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) - Field (GRAM, ByteAcc, Lock, Preserve) - { - Offset (0x10), - FLG0, 8 - } - - OperationRegion (GSTS, SystemIO, 0xC028, 0x02) - Field (GSTS, ByteAcc, NoLock, Preserve) - { - , 4, - IRQR, 1 - } - - OperationRegion (Z007, SystemIO, 0x21, 0x01) - Field (Z007, ByteAcc, NoLock, Preserve) - { - Z008, 8 - } - - OperationRegion (Z009, SystemIO, 0xA1, 0x01) - Field (Z009, ByteAcc, NoLock, Preserve) - { - Z00A, 8 - } - - #include "northbridge/amd/amdk8/util.asl" - -} diff --git a/src/mainboard/iwill/dk8_htx/fadt.c b/src/mainboard/iwill/dk8_htx/fadt.c deleted file mode 100644 index 5a7c2a789f..0000000000 --- a/src/mainboard/iwill/dk8_htx/fadt.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - * (C) Copyright 2005 Stefan Reinauer <stepan@openbios.org> - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> - -extern unsigned pm_base; /* pm_base should be set in sb ACPI */ - -void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ - - acpi_header_t *header=&(fadt->header); - - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt,0,sizeof(acpi_fadt_t)); - memcpy(header->signature,"FACP",4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id,OEM_ID,6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id,ASLC,4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl=(u32)facs; - fadt->dsdt= (u32)dsdt; - // 3=Workstation, 4=Enterprise Server, 7=Performance Server - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - // disable system management mode by setting to 0: - fadt->smi_cmd = 0;//pm_base+0x2f; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - fadt->pm1a_evt_blk = pm_base; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = pm_base+0x04; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = 0x0000; - fadt->pm_tmr_blk = pm_base+0x08; - fadt->gpe0_blk = pm_base+0x20; - fadt->gpe1_blk = pm_base+0xb0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 8; - fadt->gpe1_base = 16; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; // 0x7d these have to be - fadt->mon_alrm = 0; // 0x7e added to cmos.layout - fadt->century = 0; // 0x7f to make rtc alrm work - fadt->iapc_boot_arch = 0x3; // See table 5-11 - fadt->flags = 0x25; - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pm_base; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pm_base+4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pm_base+0x08; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pm_base+0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 64; - fadt->x_gpe1_blk.bit_offset = 16; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = pm_base+0xb0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/iwill/dk8_htx/get_bus_conf.c b/src/mainboard/iwill/dk8_htx/get_bus_conf.c deleted file mode 100644 index 1121fb3689..0000000000 --- a/src/mainboard/iwill/dk8_htx/get_bus_conf.c +++ /dev/null @@ -1,217 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, // SB chain m - 0x0000000, // HTX - 0x0000100, // co processor on socket 1 -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -static unsigned get_hcid(unsigned i) -{ - unsigned id = 0; - - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - - unsigned devn = sysconf.hcdn[i] & 0xff; - - struct device *dev; - - dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); - - switch (dev->device) { - case 0x7458: //8132 - id = 1; - break; - case 0x7454: //8151 - id = 2; - break; - case 0x7450: //8131 - id = 3; - break; - } - - // we may need more way to find out hcid: subsystem id? GPIO read ? - - // we need use id for 1. bus num, 2. mptable, 3. ACPI table - - return id; -} - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i, j; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn3 = sysconf.hcdn[0] & 0xff; - - m->bus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_8111_0 = m->bus_8132_0; - - /* 8111 */ - dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8111_0, sysconf.sbdn); - } - - /* 8132-1 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 0)); - if (dev) { - m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132_0, m->sbdn3); - } - - /* 8132-2 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3 + 1, 0)); - if (dev) { - m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132_0, m->sbdn3 + 1); - } - - /* HT chain 1 */ - j = 0; - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - - // check hcid type here - sysconf.hcid[i] = get_hcid(i); - - switch (sysconf.hcid[i]) { - - case 1: //8132 - case 3: //8131 - - m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - - m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; - - /* 8132-1 */ - dev = - dev_find_slot(m->bus_8132a[j][0], - PCI_DEVFN(m->sbdn3a[j], 0)); - if (dev) { - m->bus_8132a[j][1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132a[j][0], m->sbdn3a[j]); - } - - /* 8132-2 */ - dev = - dev_find_slot(m->bus_8132a[j][0], - PCI_DEVFN(m->sbdn3a[j] + 1, 0)); - if (dev) { - m->bus_8132a[j][2] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8132a[j][0], m->sbdn3a[j] + 1); - } - - break; - - case 2: //8151 - - m->bus_8151[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - m->sbdn5[j] = sysconf.hcdn[i] & 0xff; - /* 8151 */ - dev = - dev_find_slot(m->bus_8151[j][0], - PCI_DEVFN(m->sbdn5[j] + 1, 0)); - - if (dev) { - m->bus_8151[j][1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_8151[j][0], m->sbdn5[j] + 1); - } - - break; - } - - j++; - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_8111 = apicid_base + 0; - m->apicid_8132_1 = apicid_base + 1; - m->apicid_8132_2 = apicid_base + 2; - for (i = 0; i < j; i++) { - m->apicid_8132a[i][0] = apicid_base + 3 + i * 2; - m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1; - } - -} diff --git a/src/mainboard/iwill/dk8_htx/irq_tables.c b/src/mainboard/iwill/dk8_htx/irq_tables.c deleted file mode 100644 index 33d4837a5d..0000000000 --- a/src/mainboard/iwill/dk8_htx/irq_tables.c +++ /dev/null @@ -1,148 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - struct mb_sysconf_t *m; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_8111_0; - pirq->rtr_devfn = ((sysconf.sbdn + 1) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - { - struct device *dev; - dev = - dev_find_slot(m->bus_8111_0, - PCI_DEVFN(sysconf.sbdn + 1, 3)); - if (dev) { - /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D - - PINTA = IRQ3 - PINTB = IRQ5 - PINTC = IRQ10 - PINTD = IRQ11 - */ - pci_write_config16(dev, 0x56, 0xba53); - } - } - -//pci bridge - printk(BIOS_DEBUG, "setting Onboard AMD Southbridge\n"); - static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 }; - pci_assign_irqs(m->bus_8111_0, sysconf.sbdn + 1, slotIrqs_1_4); - write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn + 1) << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - printk(BIOS_DEBUG, "setting Onboard AMD USB\n"); - static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11 }; - pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0); - write_pirq_info(pirq_info, m->bus_8111_1, 0, 0, 0, 0, 0, 0, 0, 0x4, - 0xdef8, 0, 0); - pirq_info++; - slot_num++; - -//pcix bridge -// write_pirq_info(pirq_info, m->bus_8132_0, (sbdn3 << 3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); -// pirq_info++; slot_num++; - - int j = 0; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - j++; - - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/iwill/dk8_htx/mainboard.c b/src/mainboard/iwill/dk8_htx/mainboard.c deleted file mode 100644 index 905a0d5f8f..0000000000 --- a/src/mainboard/iwill/dk8_htx/mainboard.c +++ /dev/null @@ -1,17 +0,0 @@ -#include <console/console.h> -#include <device/device.h> -#include <arch/acpi.h> -#include <cpu/amd/powernow.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mainboard.h" - -static void mainboard_enable(struct device *dev) -{ - dev->ops->write_acpi_tables = mainboard_write_acpi_tables; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/iwill/dk8_htx/mainboard.h b/src/mainboard/iwill/dk8_htx/mainboard.h deleted file mode 100644 index 111b4457ca..0000000000 --- a/src/mainboard/iwill/dk8_htx/mainboard.h +++ /dev/null @@ -1 +0,0 @@ -unsigned long mainboard_write_acpi_tables(struct device *device, unsigned long start, acpi_rsdp_t *rsdp); diff --git a/src/mainboard/iwill/dk8_htx/mb_sysconf.h b/src/mainboard/iwill/dk8_htx/mb_sysconf.h deleted file mode 100644 index 4933d480ed..0000000000 --- a/src/mainboard/iwill/dk8_htx/mb_sysconf.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_8132_0; - unsigned char bus_8132_1; - unsigned char bus_8132_2; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - - unsigned char bus_8132a[7][3]; - - unsigned char bus_8151[7][2]; - - unsigned apicid_8111; - unsigned apicid_8132_1; - unsigned apicid_8132_2; - unsigned apicid_8132a[7][2]; - - unsigned sbdn3; - unsigned sbdn3a[7]; - unsigned sbdn5[7]; - -}; - -#endif diff --git a/src/mainboard/iwill/dk8_htx/mptable.c b/src/mainboard/iwill/dk8_htx/mptable.c deleted file mode 100644 index daf9b421f0..0000000000 --- a/src/mainboard/iwill/dk8_htx/mptable.c +++ /dev/null @@ -1,186 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int i, j, bus_isa; - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, m->apicid_8111, 0x11, VIO_APIC_VADDR); //8111 - { - struct device *dev; - struct resource *res; - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8132_1, 0x11, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8132_2, 0x11, - res2mmio(res, 0, 0)); - } - } - - j = 0; - - for(i = 1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - - switch(sysconf.hcid[i]) { - case 1: // 8132 - case 3: // 8131 - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8132a[j][0], 0x11, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8132a[j][1], 0x11, - res2mmio(res, 0, 0)); - } - } - break; - } - j++; - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_8111, 0); - -//??? What - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ((sysconf.sbdn+1)<<2)|3, m->apicid_8111, 0x13); - -// Onboard AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (0 << 2)|3, m->apicid_8111, 0x13); - -// Onboard VGA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (6 << 2)|0, m->apicid_8111, 0x12); - -//Slot 5 PCI 32 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (5 << 2)|i, m->apicid_8111, 0x10 + (1+i)%4); //16 - } - -//Slot 6 PCI 32 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (4 << 2)|i, m->apicid_8111, 0x10 + (0+i)%4); //16 - } -//Slot 1: HTX - -//Slot 2 PCI-X 133/100/66 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, (2 << 2)|i, m->apicid_8132_2, (2+i)%4); //30 - } - -//Slot 3 PCI-X 133/100/66 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (1 << 2)|i, m->apicid_8132_1, (1+i)%4); //25 - } - -//Slot 4 PCI-X 133/100/66 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (2 << 2)|i, m->apicid_8132_1, (2+i)%4); //26 - } - -//Onboard NICS - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (3 << 2)|0, m->apicid_8132_1, 3); //27 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (4 << 2)|0, m->apicid_8132_1, 0); //24 - -//Onboard SATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (5 << 2)|0, m->apicid_8132_1, 1); //25 - - j = 0; - - for(i = 1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - int ii; - struct device *dev; - struct resource *res; - switch(sysconf.hcid[i]) { - case 1: - case 3: - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - //Slot 1 PCI-X 133/100/66 - for(ii = 0; ii < 4; ii++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][1], (0 << 2)|ii, m->apicid_8132a[j][0], (0+ii)%4); // - } - } - } - - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - //Slot 2 PCI-X 133/100/66 - for(ii = 0; ii < 4; ii++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][2], (0 << 2)|ii, m->apicid_8132a[j][1], (0+ii)%4); //25 - } - } - } - - break; - case 2: - - // Slot AGP - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8151[j][1], 0x0, m->apicid_8111, 0x11); - break; - } - - j++; - } - - - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/iwill/dk8_htx/resourcemap.c b/src/mainboard/iwill/dk8_htx/resourcemap.c deleted file mode 100644 index 11e80eadce..0000000000 --- a/src/mainboard/iwill/dk8_htx/resourcemap.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000203, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/iwill/dk8_htx/romstage.c b/src/mainboard/iwill/dk8_htx/romstage.c deleted file mode 100644 index f573cf58f9..0000000000 --- a/src/mainboard/iwill/dk8_htx/romstage.c +++ /dev/null @@ -1,163 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/amd/amd8111/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <delay.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -unsigned get_sbdn(unsigned bus); - -/* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 28); - /* Ensure the BIOS has control of the memory lines. */ - outb((1 << 2)|(0 << 0), SMBUS_IO_BASE + 0xc0 + 29); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 29); - } -} - -void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset_high */ - outb((1 << 2)|(1 << 0), SMBUS_IO_BASE + 0xc0 + 28); - udelay(90); - } -} - -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/amd/amd8111/early_ctrl.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset; - unsigned bsp_apicid = 0; - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_mb_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - -#if 0 - dump_smbus_registers(); -#endif - - memreset_setup(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - init_timer(); // Need to use TMICT to synchronize FID/VID - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -#if 0 - dump_pci_devices(); -#endif -} diff --git a/src/mainboard/iwill/dk8_htx/ssdt2.asl b/src/mainboard/iwill/dk8_htx/ssdt2.asl deleted file mode 100644 index a86594bf9f..0000000000 --- a/src/mainboard/iwill/dk8_htx/ssdt2.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci2_hc.asl" - } - } - -} diff --git a/src/mainboard/iwill/dk8_htx/ssdt3.asl b/src/mainboard/iwill/dk8_htx/ssdt3.asl deleted file mode 100644 index e4f299096f..0000000000 --- a/src/mainboard/iwill/dk8_htx/ssdt3.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("SSDT3.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci3_hc.asl" - } - } - -} diff --git a/src/mainboard/iwill/dk8_htx/ssdt4.asl b/src/mainboard/iwill/dk8_htx/ssdt4.asl deleted file mode 100644 index 71a02efd8a..0000000000 --- a/src/mainboard/iwill/dk8_htx/ssdt4.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("SSDT4.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci4_hc.asl" - } - } - -} diff --git a/src/mainboard/iwill/dk8_htx/ssdt5.asl b/src/mainboard/iwill/dk8_htx/ssdt5.asl deleted file mode 100644 index 37886a9f99..0000000000 --- a/src/mainboard/iwill/dk8_htx/ssdt5.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005 AMD - */ -DefinitionBlock ("SSDT5.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) -{ - Scope (_SB) - { - External (DADD, MethodObj) - External (GHCE, MethodObj) - External (GHCN, MethodObj) - External (GHCL, MethodObj) - External (GHCD, MethodObj) - External (GNUS, MethodObj) - External (GIOR, MethodObj) - External (GMEM, MethodObj) - External (GWBN, MethodObj) - External (GBUS, MethodObj) - - External (PICF) - - External (\_SB.PCI0.LNKA, DeviceObj) - External (\_SB.PCI0.LNKB, DeviceObj) - External (\_SB.PCI0.LNKC, DeviceObj) - External (\_SB.PCI0.LNKD, DeviceObj) - - Device (PCIX) - { - - // BUS ? Second HT Chain - Name (HCIN, 0xcc) // HC2 0x01 - - Name (_UID, 0xdd) // HC 0x03 - - Name (_HID, "PNP0A03") - - Method (_ADR, 0, NotSerialized) //Fake bus should be 0 - { - Return (DADD(GHCN(HCIN), 0x00000000)) - } - - Method (_BBN, 0, NotSerialized) - { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - - Method (_STA, 0, NotSerialized) - { - Return (\_SB.GHCE(HCIN)) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { }) - Store( GHCN(HCIN), Local4) - Store( GHCL(HCIN), Local5) - - Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1) - Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2) - Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3) - Return (Local3) - } - - #include "acpi/pci5_hc.asl" - } - } - -} diff --git a/src/mainboard/kontron/kt690/Kconfig b/src/mainboard/kontron/kt690/Kconfig deleted file mode 100644 index e679e66154..0000000000 --- a/src/mainboard/kontron/kt690/Kconfig +++ /dev/null @@ -1,52 +0,0 @@ -if BOARD_KONTRON_KT690 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_WINBOND_W83627DHG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select GFXUMA - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default kontron/kt690 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "KT690/mITX" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_KONTRON_KT690 diff --git a/src/mainboard/kontron/kt690/Kconfig.name b/src/mainboard/kontron/kt690/Kconfig.name deleted file mode 100644 index 1a9313cf3f..0000000000 --- a/src/mainboard/kontron/kt690/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_KONTRON_KT690 - bool "KT690/mITX" diff --git a/src/mainboard/kontron/kt690/acpi/ide.asl b/src/mainboard/kontron/kt690/acpi/ide.asl deleted file mode 100644 index d5badfcb6b..0000000000 --- a/src/mainboard/kontron/kt690/acpi/ide.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/kontron/kt690/acpi/routing.asl b/src/mainboard/kontron/kt690/acpi/routing.asl deleted file mode 100644 index 97cd733521..0000000000 --- a/src/mainboard/kontron/kt690/acpi/routing.asl +++ /dev/null @@ -1,258 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, // Link G? - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){ 0x0002FFFF, 0, 0, 18 }, - Package(){ 0x0002FFFF, 1, 0, 19 }, - Package(){ 0x0002FFFF, 2, 0, 16 }, - Package(){ 0x0002FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){ 0x0003FFFF, 0, 0, 19 }, - Package(){ 0x0003FFFF, 1, 0, 16 }, - Package(){ 0x0003FFFF, 2, 0, 17 }, - Package(){ 0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){ 0x0004FFFF, 0, 0, 16 }, - Package(){ 0x0004FFFF, 1, 0, 17 }, - Package(){ 0x0004FFFF, 2, 0, 18 }, - Package(){ 0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){ 0x0005FFFF, 0, 0, 17 }, - Package(){ 0x0005FFFF, 1, 0, 18 }, - Package(){ 0x0005FFFF, 2, 0, 19 }, - Package(){ 0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){ 0x0006FFFF, 0, 0, 18 }, - Package(){ 0x0006FFFF, 1, 0, 19 }, - Package(){ 0x0006FFFF, 2, 0, 16 }, - Package(){ 0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){ 0x0007FFFF, 0, 0, 19 }, - Package(){ 0x0007FFFF, 1, 0, 16 }, - Package(){ 0x0007FFFF, 2, 0, 17 }, - Package(){ 0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){ 0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){ 0x0013FFFF, 0, 0, 16 }, - Package(){ 0x0013FFFF, 1, 0, 17 }, - Package(){ 0x0013FFFF, 2, 0, 18 }, - Package(){ 0x0013FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){ 0x0014FFFF, 0, 0, 16 }, - Package(){ 0x0014FFFF, 1, 0, 17 }, - Package(){ 0x0014FFFF, 2, 0, 18 }, - Package(){ 0x0014FFFF, 3, 0, 19 }, - - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTC, 0 }, - Package(){0x0005FFFF, 1, INTD, 0 }, - Package(){0x0005FFFF, 2, INTA, 0 }, - Package(){0x0005FFFF, 3, INTB, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - Package(){0x0005FFFF, 2, 0, 16 }, - Package(){0x0005FFFF, 3, 0, 17 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/kontron/kt690/acpi/sata.asl b/src/mainboard/kontron/kt690/acpi/sata.asl deleted file mode 100644 index 474e5ed6d2..0000000000 --- a/src/mainboard/kontron/kt690/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/kontron/kt690/acpi/usb.asl b/src/mainboard/kontron/kt690/acpi/usb.asl deleted file mode 100644 index 638690697c..0000000000 --- a/src/mainboard/kontron/kt690/acpi/usb.asl +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/kontron/kt690/acpi_tables.c b/src/mainboard/kontron/kt690/acpi_tables.c deleted file mode 100644 index 75834b6c7f..0000000000 --- a/src/mainboard/kontron/kt690/acpi_tables.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/kontron/kt690/board_info.txt b/src/mainboard/kontron/kt690/board_info.txt deleted file mode 100644 index fc42f537d6..0000000000 --- a/src/mainboard/kontron/kt690/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: mini -Board URL: http://emea.kontron.com/products/boards+and+mezzanines/embedded+motherboards/miniitx+motherboards/kt690mitx+bga.html?searchtermresultpage=kt690%2Fmitx diff --git a/src/mainboard/kontron/kt690/cmos.layout b/src/mainboard/kontron/kt690/cmos.layout deleted file mode 100644 index 104d51f4c2..0000000000 --- a/src/mainboard/kontron/kt690/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/kontron/kt690/devicetree.cb b/src/mainboard/kontron/kt690/devicetree.cb deleted file mode 100644 index 3ab33378a3..0000000000 --- a/src/mainboard/kontron/kt690/devicetree.cb +++ /dev/null @@ -1,125 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1488 0x6900 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - #device pnp 2e.6 off # SPI - #end - device pnp 2e.307 off # GPIO 1 - end - device pnp 2e.8 on # WDTO#, PLED - end - device pnp 2e.009 off # GPIO2 - end - device pnp 2e.109 off # GPIO3 - end - device pnp 2e.209 off # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # HWM - io 0x60 = 0xa10 - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w83627dhg - #chip superio/smsc/fdc37n972 - # seems this chip is not used? - #end - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0888" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/kontron/kt690/dsdt.asl b/src/mainboard/kontron/kt690/dsdt.asl deleted file mode 100644 index 889293f84b..0000000000 --- a/src/mainboard/kontron/kt690/dsdt.asl +++ /dev/null @@ -1,1675 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/sb600/sb600.h> - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "dsdt.aml", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "COREv2", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.HPTM) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/kontron/kt690/fadt.c b/src/mainboard/kontron/kt690/fadt.c deleted file mode 100644 index 6ebd04897f..0000000000 --- a/src/mainboard/kontron/kt690/fadt.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation, 4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1 << 3 | 0 << 2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1 << 1 | 1 << 3| 1 << 5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/kontron/kt690/get_bus_conf.c b/src/mainboard/kontron/kt690/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/kontron/kt690/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/kontron/kt690/irq_tables.c b/src/mainboard/kontron/kt690/irq_tables.c deleted file mode 100644 index 4c2a48dff7..0000000000 --- a/src/mainboard/kontron/kt690/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/kontron/kt690/mainboard.c b/src/mainboard/kontron/kt690/mainboard.c deleted file mode 100644 index de6c0bb5c9..0000000000 --- a/src/mainboard/kontron/kt690/mainboard.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - -/******************************************************** -* dbm690t uses a BCM5789 as on-board NIC. -* It has a pin named LOW_POWER to enable it into LOW POWER state. -* In order to run NIC, we should let it out of Low power state. This pin is -* controlled by sb600 GPM3. -* RRG4.2.3 GPM as GPIO -* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers: -* I/O C50, C51, C52, PM I/O94, 95, 96. -* RRG4.2.3.1 GPM pins as Input -* RRG4.2.3.2 GPM pins as Output -********************************************************/ -static void enable_onboard_nic(void) -{ - u8 byte; - - printk(BIOS_INFO, "%s.\n", __func__); - - /* set index register 0C50h to 13h (miscellaneous control) */ - outb(0x13, 0xC50); /* CMIndex */ - - /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */ - byte = inb(0xC51); - byte &= 0x3F; - byte |= 0x40; - outb(byte, 0xC51); - - /* set GPM port 0C52h bit 3 to 0 to enable output for GPM3 */ - byte = inb(0xC52); - byte &= ~0x8; - outb(byte, 0xC52); - - /* set CM data register 0C51h bits [7:6] to 10b to set Output state control */ - byte = inb(0xC51); - byte &= 0x3F; - byte |= 0x80; /* 7:6=10 */ - outb(byte, 0xC51); - - /* set GPM port 0C52h bit 3 to 0 to output 0 on GPM3 */ - byte = inb(0xC52); - byte &= ~0x8; - outb(byte, 0xC52); -} - -/******************************************************** -* dbm690t uses SB600 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - struct device *sm_dev; - struct device *ide_dev; - - printk(BIOS_INFO, "%s.\n", __func__); - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - struct device *sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in dbm690t board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard KT690 Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - get_ide_dma66(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/kontron/kt690/mptable.c b/src/mainboard/kontron/kt690/mptable.c deleted file mode 100644 index 9515931627..0000000000 --- a/src/mainboard/kontron/kt690/mptable.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/kontron/kt690/resourcemap.c b/src/mainboard/kontron/kt690/resourcemap.c deleted file mode 100644 index ff6aa305f0..0000000000 --- a/src/mainboard/kontron/kt690/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_kt690_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/kontron/kt690/romstage.c b/src/mainboard/kontron/kt690/romstage.c deleted file mode 100644 index b7bde00e1c..0000000000 --- a/src/mainboard/kontron/kt690/romstage.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <spd.h> -#include <cpu/x86/lapic.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include <northbridge/amd/amdk8/f.h> - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_kt690_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - printk(BIOS_SPEW, "... because cpuid returned %08x\n", cpuid1.edx); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - rs690_before_pci_init(); - sb600_before_pci_init(); -} diff --git a/src/mainboard/msi/ms7135/Kconfig b/src/mainboard/msi/ms7135/Kconfig deleted file mode 100644 index 3affb6a2a1..0000000000 --- a/src/mainboard/msi/ms7135/Kconfig +++ /dev/null @@ -1,55 +0,0 @@ -if BOARD_MSI_MS7135 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_754 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_WINBOND_W83627THG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select CK804_USE_NIC - select CK804_USE_ACI - select QRANK_DIMM_SUPPORT - select HAVE_ACPI_TABLES - -config MAINBOARD_DIR - string - default msi/ms7135 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MS-7135" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 13 - -config CK804_PCI_E_X - int - default 0 - -endif # BOARD_MSI_MS7135 diff --git a/src/mainboard/msi/ms7135/Kconfig.name b/src/mainboard/msi/ms7135/Kconfig.name deleted file mode 100644 index d087e684f9..0000000000 --- a/src/mainboard/msi/ms7135/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS7135 - bool "MS-7135 (K8N Neo3)" diff --git a/src/mainboard/msi/ms7135/acpi_tables.c b/src/mainboard/msi/ms7135/acpi_tables.c deleted file mode 100644 index a637637a84..0000000000 --- a/src/mainboard/msi/ms7135/acpi_tables.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <assert.h> - -/* APIC */ -unsigned long acpi_fill_madt(unsigned long current) -{ - struct device *dev; - struct resource *res; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write NVIDIA CK804 IOAPIC. */ - dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); - ASSERT(dev != NULL); - - res = find_resource(dev, PCI_BASE_ADDRESS_1); - ASSERT(res != NULL); - - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0); - - /* Initialize interrupt mapping if mptable.c didn't. */ -#if (!CONFIG_GENERATE_MP_TABLE) -#error untested config - pci_write_config32(dev, 0x7c, 0x0120d218); - pci_write_config32(dev, 0x80, 0x12008a00); - pci_write_config32(dev, 0x84, 0x0000007d); -#endif - - /* IRQ9 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* create all subtables for processors */ - /* acpi_create_madt_lapic_nmis returns current, not size. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/msi/ms7135/board_info.txt b/src/mainboard/msi/ms7135/board_info.txt deleted file mode 100644 index caae90a766..0000000000 --- a/src/mainboard/msi/ms7135/board_info.txt +++ /dev/null @@ -1,8 +0,0 @@ -Board name: MS-7135 (K8N Neo3) -Category: desktop -Board URL: http://no.msi.com/product/mb/K8N-Neo3.html -ROM package: PLCC -ROM protocol: LPC -ROM socketed: variable -Flashrom support: y -Release year: 2005 diff --git a/src/mainboard/msi/ms7135/cmos.layout b/src/mainboard/msi/ms7135/cmos.layout deleted file mode 100644 index 531b2d62cc..0000000000 --- a/src/mainboard/msi/ms7135/cmos.layout +++ /dev/null @@ -1,65 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 8 h 0 century -408 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -448 4 e 10 ram_voltage -452 4 e 11 nf4_voltage -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -10 0 2.55 -10 1 2.50 -10 2 2.60 -10 3 2.65 -10 4 2.70 - -11 0 1.50 -11 1 1.55 -11 2 1.60 - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms7135/devicetree.cb b/src/mainboard/msi/ms7135/devicetree.cb deleted file mode 100644 index e3f0c8c98a..0000000000 --- a/src/mainboard/msi/ms7135/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_754 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - - device domain 0 on # PCI domain - subsystemid 0x1462 0x7135 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.7 off end # Game port, MIDI, GPIO 1 & 5 - device pnp 4e.8 off end # GPIO 2 - device pnp 4e.9 off end # GPIO 3, GPIO 4 - device pnp 4e.a off end # ACPI - device pnp 4e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end # SMbus - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # Onboard audio (ACI) - device pci 4.1 off end # Onboard modem (MCI), N/A - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 (N/A) - device pci c.0 off end # PCI E 2 (N/A) - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms7135/dsdt.asl b/src/mainboard/msi/ms7135/dsdt.asl deleted file mode 100644 index e906270b68..0000000000 --- a/src/mainboard/msi/ms7135/dsdt.asl +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - Name (PICM, 0x00) - Method (_PIC, 1, Serialized) { - Store (Arg0, PICM) - } - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device (CK804) */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - \_SB.GXXX(node, link) - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - -#include "southbridge/nvidia/ck804/acpi/ck804.asl" - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LUOH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LUEH, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LAUD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LMOD, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LPA0, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LSA0, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LSA1, 0x00 }, - - Package (0x04) { 0x000AFFFF, 0x00, \_SB.PCI0.LEMA, 0x00 }, - - Package (0x04) { 0x000BFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000CFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000DFFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - - Package (0x04) { 0x000EFFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - }) - - Device (PCIC) - { - Name (_ADR, 0x00090000) - Name (_UID, 0x00) - Name (_PRT, Package () { - /* AGR slot "AGP1" */ - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - /* PCI slot "PCI1" */ - Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - /* Not sure INTD is right, but this is what the OEM BIOS does. */ - Package (0x04) { 0x0007FFFF, 0x03, \_SB.PCI0.LNKE, 0x00 }, - - /* PCI slot "PCI2" */ - Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - - /* PCI slot "PCI3" */ - Package (0x04) { 0x0009FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - }) - } - - /* 2:00 PCIe x1 */ - Device (PEX1) - { - Name (_ADR, 0x000d0000) - Name (_UID, 0x00) - } - - /* 3:00 PCIe x16 */ - Device (PEX0) - { - Name (_ADR, 0x000e0000) - Name (_UID, 0x00) - } - - Device (LPC) { - Name (_HID, EisaId ("PNP0A05")) - Name (_ADR, 0x00010000) - - OperationRegion (CF44, PCI_Config, 0x44, 0x04) - Field (CF44, ByteAcc, NoLock, Preserve) - { - ETBA, 32, - } - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* Parallel port */ - Device (LP0) - { - Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - FixedIO (0x0378, 0x10) - IRQNoFlags () {7} - }) - Return (TMP) - } - } - - /* Floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - FixedIO (0x03F0, 0x08) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } -#if 0 - Device (HPET) - { - Name (_HID, EisaId ("PNP0103")) - Name (CRS, ResourceTemplate () - { - Memory32Fixed (ReadOnly, - 0x00000000, - 0x00001000, - _Y02) - }) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._BAS, HPT) - Store (ETBA, HPT) - Return (CRS) - } - - } -#endif - } - } - } -} diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c deleted file mode 100644 index 19b520fda0..0000000000 --- a/src/mainboard/msi/ms7135/get_bus_conf.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts and these will be shared by irqtable, - * mptable and acpi_tables. - */ -/* busnum is default */ -unsigned char bus_ck804[6]; -unsigned apicid_ck804; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, //no HTIO for ms7135 -}; -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, //ms7135 has only one ht-chain -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base; - - struct device *dev; - unsigned sbdn; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 6; i++) { - bus_ck804[i] = 0; - } - - bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* CK804 */ - int dn = -1; - for (i = 1; i < 4; i++) { - switch (i) { - case 1: dn = 9; break; - case 2: dn = 13; break; - case 3: dn = 14; break; - default: dn = -1; break; - } - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0)); - if (dev) { - bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_ck804 = apicid_base + 0; -} diff --git a/src/mainboard/msi/ms7135/irq_tables.c b/src/mainboard/msi/ms7135/irq_tables.c deleted file mode 100644 index e40794ef3c..0000000000 --- a/src/mainboard/msi/ms7135/irq_tables.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - -/* This is probably not right, feel free to fix this if you don't want - * to use the mptable. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; - -/** - * Add one line to IRQ table. - */ -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -/** - * Create the IRQ routing table. - * Values are derived from getpir generated code. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - unsigned sbdn; - - /* get_bus_conf() will find out all bus num and apic that share with - * mptable.c and mptable.c - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_ck804[0]; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - - pirq->exclusive_irqs = 0x828; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - -//Slot1 PCIE 16x - write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, - 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); - pirq_info++; - slot_num++; - -//Slot2 PCIE 1x - write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); - pirq_info++; - slot_num++; - -//Slot3 PCIE 1x - write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); - pirq_info++; - slot_num++; - -//Slot4 PCIE 4x - write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, - 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, - 7, 0); - pirq_info++; - slot_num++; - -//Slot5 - 7 PCI - for (i = 0; i < 3; i++) { - write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, - ((i + 0) % 4) + 1, 0xdeb8, - ((i + 1) % 4) + 1, 0xdeb8, - ((i + 2) % 4) + 1, 0xdeb8, - ((i + 3) % 4) + 1, 0xdeb8, i, 0); - pirq_info++; - slot_num++; - } - -//pci bridge - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); - pirq_info++; - slot_num++; - -//smbus - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//usb - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//audio - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - -#if 0 - unsigned char irq[4]; - irq[0] = 0; - irq[1] = 0; - irq[2] = 0; - irq[3] = 0; - - /* Bus, device, slots IRQs for {A,B,C,D}. */ - - irq[0] = 10; /* SMBus *//* test me */ - pci_assign_irqs(bus_ck804[0], 1, irq); - - irq[0] = 10; /* USB */ - irq[1] = 10; - pci_assign_irqs(bus_ck804[0], 2, irq); - - irq[0] = 10; /* AC97 */ - irq[1] = 0; - pci_assign_irqs(bus_ck804[0], 4, irq); - - irq[0] = 11; /* SATA */ - pci_assign_irqs(bus_ck804[0], 7, irq); - - irq[0] = 5; /* SATA */ - pci_assign_irqs(bus_ck804[0], 8, irq); - - irq[0] = 10; /* Ethernet */ - pci_assign_irqs(bus_ck804[0], 10, irq); - - /* physical slots */ - - irq[0] = 5; /* PCI E1 - x1 */ - pci_assign_irqs(bus_ck804[2], 0, irq); - - irq[0] = 11; /* PCI E2 - x16 */ - pci_assign_irqs(bus_ck804[3], 0, irq); - - /* AGP-on-PCI "AGR" ignored */ - - irq[0] = 10; /* PCI1 */ - irq[1] = 11; - irq[2] = 5; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 7, irq); - - irq[0] = 11; /* PCI2 */ - irq[1] = 10; - irq[2] = 5; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 8, irq); - - irq[0] = 5; /* PCI3 */ - irq[1] = 10; - irq[2] = 11; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 9, irq); -#endif - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/msi/ms7135/mptable.c b/src/mainboard/msi/ms7135/mptable.c deleted file mode 100644 index 35dc02c482..0000000000 --- a/src/mainboard/msi/ms7135/mptable.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; -extern unsigned apicid_ck804; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned sbdn; - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &bus_isa); - -/* I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - u32 dword; - - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, - res2mmio(res, 0, 0)); - } - - /* Initialize interrupt mapping */ - - /* copied from stock bios */ - /*0x01800500,0x1800d509,0x00520d08*/ - - dword = 0x08d0d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x8d001509; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00010271; - pci_write_config32(dev, 0x84, dword); - - } - } - - /* Now, assemble the table. */ - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0); - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \ - bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin)) - -#if 0 - // Onboard ck804 smbus - PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */ - -#endif - // Onboard ck804 USB - PCI_INT(0, sbdn+2, 0, 23); - PCI_INT(0, sbdn+2, 1, 23); - - // Onboard ck804 AC-97 - PCI_INT(0, sbdn+4, 0, 23); - - // Onboard ck804 SATA 0 - PCI_INT(0, sbdn+7, 0, 20); - - // Onboard ck804 SATA 1 - PCI_INT(0, sbdn+8, 0, 21); - - // Onboard ck804 NIC - PCI_INT(0, sbdn+10, 0, 22); - - - /* "AGR" slot */ - PCI_INT(1, 0, 0, 16); - PCI_INT(1, 0, 1, 17); - - /* legacy PCI */ - PCI_INT(1, 7, 0, 17); - PCI_INT(1, 7, 1, 18); - PCI_INT(1, 7, 2, 19); - PCI_INT(1, 7, 3, 16); - - PCI_INT(1, 8, 0, 18); - PCI_INT(1, 8, 1, 19); - PCI_INT(1, 8, 2, 16); - PCI_INT(1, 8, 3, 17); - - PCI_INT(1, 9, 0, 19); - PCI_INT(1, 9, 1, 16); - PCI_INT(1, 9, 2, 17); - PCI_INT(1, 9, 3, 18); - - - /* PCI-E x1 port */ - PCI_INT(2, 0, 0, 19); - /* XXX guesses */ - PCI_INT(2, 0, 1, 16); - PCI_INT(2, 0, 2, 17); - PCI_INT(2, 0, 3, 18); - - /* PCI-E x16 port */ /* XXX fix me ? */ - PCI_INT(3, 0, 0, 18); - /* XXX guesses */ - PCI_INT(3, 0, 1, 19); - PCI_INT(3, 0, 2, 16); - PCI_INT(3, 0, 3, 17); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_ck804[0]); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c deleted file mode 100644 index 39afe47749..0000000000 --- a/src/mainboard/msi/ms7135/romstage.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include <cpu/amd/model_fxx_rev.h> -#include <console/console.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include <southbridge/nvidia/ck804/early_smbus.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#if IS_ENABLED(CONFIG_HAVE_OPTION_TABLE) -#include "option_table.h" -#endif - -#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include <southbridge/nvidia/ck804/early_setup_ss.h> -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void ms7135_set_ram_voltage(void) -{ - u8 b; - b = read_option(ram_voltage, 0); - if (b > 4) /* default if above 2.70v */ - b = 0; - printk(BIOS_INFO, "setting RAM voltage %08x\n", b); - ck804_smbus_write_byte(1, 0x2f, 0x00, b); -} - -static void ms7135_set_nf4_voltage(void) -{ - u8 b; - b = read_option(nf4_voltage, 0); - if (b > 2) /* default if above 1.60v */ - b = 0; - b |= 0x10; - printk(BIOS_INFO, "setting NF4 voltage %08x\n", b); - ck804_smbus_write_byte(1, 0x2f, 0x02, b); -} - -static void sio_setup(void) -{ - u32 dword; - u8 byte; - - /* Subject decoding */ - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0); - /* Serial 0, Serial 1 */ - dword |= (1 << 0) | (1 << 1); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { - DIMM0, DIMM1, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - ms7135_set_nf4_voltage(); - ms7135_set_ram_voltage(); - -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - dump_spd_registers(&ctrl[0]); - dump_smbus_registers(); -#endif - - sdram_initialize(nodes, ctrl); -} diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig deleted file mode 100644 index dcc74717a0..0000000000 --- a/src/mainboard/msi/ms7260/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -if BOARD_MSI_MS7260 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms7260 - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "MS-7260" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 0 - -endif # BOARD_MSI_MS7260 diff --git a/src/mainboard/msi/ms7260/Kconfig.name b/src/mainboard/msi/ms7260/Kconfig.name deleted file mode 100644 index f5be5e9cf3..0000000000 --- a/src/mainboard/msi/ms7260/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS7260 - bool "MS-7260 (K9N Neo)" diff --git a/src/mainboard/msi/ms7260/board_info.txt b/src/mainboard/msi/ms7260/board_info.txt deleted file mode 100644 index 40ae7a4784..0000000000 --- a/src/mainboard/msi/ms7260/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Board name: MS-7260 (K9N Neo) -Category: desktop -Board URL: http://no.msi.com/product/mb/K9N-Neo--PCB-1-0-.html -ROM package: PLCC -ROM socketed: y -Flashrom support: coreboot-only -Release year: 2007 diff --git a/src/mainboard/msi/ms7260/cmos.layout b/src/mainboard/msi/ms7260/cmos.layout deleted file mode 100644 index 78dc3e23a9..0000000000 --- a/src/mainboard/msi/ms7260/cmos.layout +++ /dev/null @@ -1,70 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -# TODO: Check and fix up the values as needed. - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms7260/devicetree.cb b/src/mainboard/msi/ms7260/devicetree.cb deleted file mode 100644 index 717ad009cf..0000000000 --- a/src/mainboard/msi/ms7260/devicetree.cb +++ /dev/null @@ -1,143 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x7260 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 / IrDA - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - irq 0x72 = 12 # PS/2 mouse IRQ - end - device pnp 4e.106 off # Serial flash interface (SFI) - # io 0x62 = 0x100 - end - device pnp 4e.007 off # GPIO 1 - end - device pnp 4e.107 off # Game port - # io 0x60 = 0x220 # Datasheet: 0x201 - end - device pnp 4e.207 off # MIDI - # io 0x62 = 0x300 # Datasheet: 0x330 - # irq 0x70 = 9 - end - device pnp 4e.307 off # GPIO 6 - end - device pnp 4e.8 off # WDTO#, PLED - end - device pnp 4e.009 off # GPIO 2 - end - device pnp 4e.109 off # GPIO 3 - end - device pnp 4e.209 off # GPIO 4 - end - device pnp 4e.309 off # GPIO 5 - end - device pnp 4e.a off # ACPI - end - device pnp 4e.b on # Hardware monitor - io 0x60 = 0xa10 - # TODO: IRQ? - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - # TODO: Check if the stuff below is correct / needed. - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 off end # SATA 2 (N/A on this board) - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A on this board) - device pci a.0 off end # PCI E 5 (N/A on this board?) - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # TODO: Check the two lines below. - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms7260/get_bus_conf.c b/src/mainboard/msi/ms7260/get_bus_conf.c deleted file mode 100644 index d768041e70..0000000000 --- a/src/mainboard/msi/ms7260/get_bus_conf.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ -// busnum is default. -unsigned char bus_mcp55[8]; // 1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { - /* Here you only need to set value in pci1234 for HT-IO that could - * be installed or not. You may need to preset pci1234 for HTIO board, - * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. - */ - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { - /* HT Chain device num, actually it is unit id base of every ht - * device in chain, assume every chain only have 4 ht device at most. - */ - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned int apicid_base, sbdn; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) - bus_mcp55[i] = 0; - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk - (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_mcp55 = apicid_base + 0; -} diff --git a/src/mainboard/msi/ms7260/hda_verb.c b/src/mainboard/msi/ms7260/hda_verb.c deleted file mode 100644 index 072a306131..0000000000 --- a/src/mainboard/msi/ms7260/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/msi/ms7260/irq_tables.c b/src/mainboard/msi/ms7260/irq_tables.c deleted file mode 100644 index 359c1d4648..0000000000 --- a/src/mainboard/msi/ms7260/irq_tables.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_mcp55[8]; // 1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned int slot_num, sbdn; - uint8_t *v; - uint8_t sum = 0; - int i; - - /* Will find out all bus num and apic that share with mptable.c - * and mptable.c and acpi_tables.c. - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 and 0x100000. */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - pirq->exclusive_irqs = 0; - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; /* TODO: Hm, getpir suggests 0x0364 !? */ - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* PCI bridge (00:06.0) */ - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/msi/ms7260/mptable.c b/src/mainboard/msi/ms7260/mptable.c deleted file mode 100644 index 6450d2da68..0000000000 --- a/src/mainboard/msi/ms7260/mptable.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; // 1 -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned int sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd0001202; - pci_write_config32(dev, 0x84, dword); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 1) << 2) | 1, apicid_mcp55, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 6) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 2, apicid_mcp55, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 8) << 2) | 0, apicid_mcp55, 0x16); // 22 - - for (j = 7; j >= 2; j--) { - if (!bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2) | i, apicid_mcp55, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); - } - - for (j = 0; j < 2; j++) { - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[1], ((0x06 + j) << 2) | i, apicid_mcp55, 0x10 + (2 + i + j) % 4); - } - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms7260/resourcemap.c b/src/mainboard/msi/ms7260/resourcemap.c deleted file mode 100644 index f17fadf1a0..0000000000 --- a/src/mainboard/msi/ms7260/resourcemap.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* TODO: This is copied from the GIGABYTE GA-M57SLI-S4 target. */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of CPU 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c deleted file mode 100644 index 1da8ba9355..0000000000 --- a/src/mainboard/msi/ms7260/romstage.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <lib.h> -#include <spd.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) {} -void activate_spd_rom(const struct mem_controller *ctrl) {} - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* FIXME: This should be part of the Super I/O code/config. */ - pnp_enter_conf_state(SERIAL_DEV); - /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */ - pnp_write_config(SERIAL_DEV, 0x24, 0); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - pnp_exit_conf_state(SERIAL_DEV); - - setup_mb_resource_map(); - console_init(); - report_bist_failure(bist); /* Halt upon BIST failure. */ - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - /* In BSP so could hold all AP until sysinfo is in RAM. */ - set_sysinfo_in_ram(0); - - setup_coherent_ht_domain(); /* Routing table and start other core0. */ - wait_all_core0_started(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched - * becase optimize_link_coherent_ht is moved out from - * setup_coherent_ht_domain, so here need to make sure last core0 is - * started, esp for two way system (there may be APIC ID conflicts in - * that case). - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* Set up chains and store link pair for optimization later. */ - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - { - msr_t msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - /* fidvid change will issue one LDTSTOP and the HT change will be effective too. */ - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl in sysinfo now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* All AP stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig deleted file mode 100644 index 355fdcfa35..0000000000 --- a/src/mainboard/msi/ms9185/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_MSI_MS9185 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM5780 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms9185 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config MAINBOARD_PART_NUMBER - string - default "MS-9185" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9185 diff --git a/src/mainboard/msi/ms9185/Kconfig.name b/src/mainboard/msi/ms9185/Kconfig.name deleted file mode 100644 index 00594c059d..0000000000 --- a/src/mainboard/msi/ms9185/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS9185 - bool "MS-9185 (K9SD Master-S2R)" diff --git a/src/mainboard/msi/ms9185/board_info.txt b/src/mainboard/msi/ms9185/board_info.txt deleted file mode 100644 index e5081f9922..0000000000 --- a/src/mainboard/msi/ms9185/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: K9SD Master-S2R (MS-9185) -Category: server -Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_9185.aspx -Release year: 2006 diff --git a/src/mainboard/msi/ms9185/cmos.layout b/src/mainboard/msi/ms9185/cmos.layout deleted file mode 100644 index e42037e1a1..0000000000 --- a/src/mainboard/msi/ms9185/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb deleted file mode 100644 index 3c9168d2ee..0000000000 --- a/src/mainboard/msi/ms9185/devicetree.cb +++ /dev/null @@ -1,85 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # northbridge - # devices on link 0 - chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 - device pci 1.0 on # PXB 2 0x0130 - device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 - device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 - end - device pci 2.0 on end # PCI E 1 #0x0132 - device pci 3.0 on end # PCI E 2 - device pci 4.0 on end # PCI E 3 - device pci 5.0 on end # PCI E 4 - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PPBX 0x0104 - device pci e.0 on end # SATA 0x024a - device pci e.1 on end # SATA 0x024a bx_a001 - device pci e.2 on end # SATA 0x024a bx_a001 - device pci e.3 on end # SATA 0x024a bx_a001 - end - device pci 1.0 on # Legacy pci main 0x0205 - end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end - end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # it is in bcm5785_0 bus - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # amdk8 - end #domain -end diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c deleted file mode 100644 index d02f30687a..0000000000 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0)); - if (dev) { - m->bus_bcm5785_1_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for (i = 1; i < 7; i++) { - dev = - dev_find_slot(m->bus_bcm5780[0], - PCI_DEVFN(m->sbdn2 + i - 1, 0)); - if (dev) { - m->bus_bcm5780[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5780[0], m->sbdn2 + i - 1); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - for (i = 0; i < 3; i++) - m->apicid_bcm5785[i] = apicid_base + i; -} diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c deleted file mode 100644 index 65f82a2823..0000000000 --- a/src/mainboard/msi/ms9185/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_bcm5785_0; - pirq->rtr_devfn = (sysconf.sbdn << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1166; - pirq->rtr_device = 0x0036; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/msi/ms9185/mb_sysconf.h b/src/mainboard/msi/ms9185/mb_sysconf.h deleted file mode 100644 index 6944c2465c..0000000000 --- a/src/mainboard/msi/ms9185/mb_sysconf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c deleted file mode 100644 index ea7c905af0..0000000000 --- a/src/mainboard/msi/ms9185/mptable.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biederman <ebiderman@lnxi.com> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - - int i, bus_isa; - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev = NULL; - struct resource *res; - for (i = 0; i < 3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, - res2mmio(res, 0, 0)); - } - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); - -//IDE - outb(0x02, 0xc00); outb(0x0e, 0xc01); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, - m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE - -//SATA - outb(0x07, 0xc00); outb(0x0f, 0xc01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xf); - -//USB - outb(0x01, 0xc00); outb(0x0a, 0xc01); - for (i = 0; i < 3; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); // - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - struct device *dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if (dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1 << 4); // enable interrupts - pci_write_config32(dev, 0x6c, dword); - } - } - -//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 - // AIC 8130 Galileo Technology... - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_1_1, (6 << 2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); // - - -//pci slot (on bcm5785) - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, (5 << 2)|i, m->apicid_bcm5785[1], 8+i%4); // - - -//onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, (4 << 2)|0, m->apicid_bcm5785[1], 0x1); - -//PCI-X on bcm5780 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[1], (4 << 2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); // - -//onboard Broadcom - for (i = 0; i < 2; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[2], (4 << 2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); // - - -// First PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[5], (0 << 2)|i, m->apicid_bcm5785[1], 0xe); // - - -// Second PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[3], (0 << 2)|i, m->apicid_bcm5785[1], 0xc); // - -// Third PCI-E x1 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[4], (0 << 2)|i, m->apicid_bcm5785[1], 0xd); // - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c deleted file mode 100644 index 533f31a49a..0000000000 --- a/src/mainboard/msi/ms9185/resourcemap.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ms9185 needs a different resource map - * - */ - -static void setup_ms9185_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c deleted file mode 100644 index d8cff07ff3..0000000000 --- a/src/mainboard/msi/ms9185/romstage.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <reset.h> -#include <cpu/x86/lapic.h> - -#include <superio/nsc/pc87417/pc87417.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) -#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/broadcom/bcm5785/early_setup.c" -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define RC0 (0x10 << 8) -#define RC1 (0x01 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - //second node - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - //enable RTC - pc87417_enable_dev(RTC_DEV); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_ms9185_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); -//bx_a010- wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - bcm5785_early_setup(); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - -#if 1 - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } -#endif - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synchronize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig deleted file mode 100644 index 9314492074..0000000000 --- a/src/mainboard/msi/ms9282/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -if BOARD_MSI_MS9282 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_ADM1027 - select DRIVERS_I2C_I2CMUX2 - -config MAINBOARD_DIR - string - default msi/ms9282 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "MS-9282" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9282 diff --git a/src/mainboard/msi/ms9282/Kconfig.name b/src/mainboard/msi/ms9282/Kconfig.name deleted file mode 100644 index 260c7de96e..0000000000 --- a/src/mainboard/msi/ms9282/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS9282 - bool "MS-9282 (K9SD Master)" diff --git a/src/mainboard/msi/ms9282/board_info.txt b/src/mainboard/msi/ms9282/board_info.txt deleted file mode 100644 index 01c035f93a..0000000000 --- a/src/mainboard/msi/ms9282/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: K9SD Master (MS-9282) -Category: server -Board URL: http://cweb.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=632 -Release year: 2006 diff --git a/src/mainboard/msi/ms9282/cmos.layout b/src/mainboard/msi/ms9282/cmos.layout deleted file mode 100644 index c4c90f697f..0000000000 --- a/src/mainboard/msi/ms9282/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb deleted file mode 100644 index 747347e504..0000000000 --- a/src/mainboard/msi/ms9282/devicetree.cb +++ /dev/null @@ -1,182 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x9282 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off end # WDTO#, PLED - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux - device i2c 70 on # 0 pca9554 1 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - device i2c 70 on # 0 pca9554 2 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - end - end - device pci 1.1 on # SM 1 - chip drivers/i2c/i2cmux2 # pca9554 SMBus mux - device i2c 72 on # PCA9554 channel 1 - chip drivers/i2c/adm1027 # HWM ADT7476 1 - device i2c 2e on end - end - end - device i2c 72 on # PCA9545 channel 2 - chip drivers/i2c/adm1027 # HWM ADT7463 - device i2c 2e on end - end - end - device i2c 72 on end # PCA9545 channel 3 - device i2c 72 on # PCA9545 channel 4 - chip drivers/i2c/adm1027 # HWM ADT7476 2 - device i2c 2e on end - end - end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # P2P - device pci 4.0 on end - end - device pci 7.0 on end # reserve - device pci 8.0 on end # MAC0 - device pci 9.0 on end # MAC1 - device pci a.0 on - device pci 0.0 on - device pci 4.0 on end # PCI-E LAN1 - device pci 4.1 on end # PCI-E LAN2 - end - end # 0x376 - device pci b.0 on end # PCI E 0x374 - device pci c.0 on end - device pci d.0 on # SAS - device pci 0.0 on end - end # PCI E 1 0x378 - device pci e.0 on end # PCI E 0 0x375 - device pci f.0 on end # PCI E 0x377, PCI-E slot - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c deleted file mode 100644 index a072d6aa36..0000000000 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - struct mb_sysconf_t *m; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06, 0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sysconf.sbdn + 0x06); - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(m->bus_mcp55[0], - PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); - if (dev) { - m->bus_mcp55[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c deleted file mode 100644 index cbb621a906..0000000000 --- a/src/mainboard/msi/ms9282/irq_tables.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h deleted file mode 100644 index 3edba64696..0000000000 --- a/src/mainboard/msi/ms9282/mb_sysconf.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c deleted file mode 100644 index d3a4287b96..0000000000 --- a/src/mainboard/msi/ms9282/mptable.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - -//SMBUS - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - -//USB1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - -//USB2.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - -//SATA1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - -//SATA2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - -//SATA3 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - -//NIC1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 -//NIC2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - - for (j = 7; j >= 2; j--) { - if (!m->bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00 << 2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - - for (j = 0; j < 1; j++) - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c deleted file mode 100644 index 53b470a5e4..0000000000 --- a/src/mainboard/msi/ms9282/resourcemap.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * MSI ms9282 needs a different resource map - * - */ - -static void setup_ms9282_resource_map(void) -{ - static const unsigned int register_values[] = { -#if 1 - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, -#endif -#if 1 - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, -#endif -#if 1 - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, -#endif - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -#if 1 -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, -#endif - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c deleted file mode 100644 index 6bde880622..0000000000 --- a/src/mainboard/msi/ms9282/romstage.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <spd.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <device/pci_ids.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_SWITCH1, device); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/mcp55/early_setup_ss.h> - -//set GPIO to input mode -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ - -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -/* FIXME - * Dummy method to allow build - * Determine if this board / CPU should support - * FID/VID and implement proper support if so - */ -#if IS_ENABLED(CONFIG_SET_FIDVID) -void init_fidvid_ap(u32 bsp_apicid, u32 apicid) { } -#endif - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); -} - -//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1. -#define RC0 (2 << 8) -#define RC1 (1 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - // node 1 - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - unsigned bsp_apicid = 0; - int needs_reset; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) { - //init_cpus(cpu_init_detectedx); - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ms9282_resource_map(); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - //wait_all_other_cores_started(bsp_apicid); -#endif - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/nvidia/Kconfig b/src/mainboard/nvidia/Kconfig deleted file mode 100644 index b06b7286f3..0000000000 --- a/src/mainboard/nvidia/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_NVIDIA - -choice - prompt "Mainboard model" - -source "src/mainboard/nvidia/*/Kconfig.name" - -endchoice - -source "src/mainboard/nvidia/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "NVIDIA" - -endif # VENDOR_NVIDIA diff --git a/src/mainboard/nvidia/Kconfig.name b/src/mainboard/nvidia/Kconfig.name deleted file mode 100644 index 44b0fa6fab..0000000000 --- a/src/mainboard/nvidia/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_NVIDIA - bool "NVIDIA" diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig b/src/mainboard/nvidia/l1_2pvv/Kconfig deleted file mode 100644 index b5e51c5ff0..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/Kconfig +++ /dev/null @@ -1,75 +0,0 @@ -if BOARD_NVIDIA_L1_2PVV - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default nvidia/l1_2pvv - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MCP55_NUM - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "l1_2pvv" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 2 - -endif # BOARD_NVIDIA_L1_2PVV diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig.name b/src/mainboard/nvidia/l1_2pvv/Kconfig.name deleted file mode 100644 index 40dffc643f..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_NVIDIA_L1_2PVV - bool "l1_2pvv" diff --git a/src/mainboard/nvidia/l1_2pvv/board_info.txt b/src/mainboard/nvidia/l1_2pvv/board_info.txt deleted file mode 100644 index b351b8e696..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/nvidia/l1_2pvv/cmos.layout b/src/mainboard/nvidia/l1_2pvv/cmos.layout deleted file mode 100644 index 9e6a9e56f2..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/nvidia/l1_2pvv/devicetree.cb b/src/mainboard/nvidia/l1_2pvv/devicetree.cb deleted file mode 100644 index d713e3f7cc..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/devicetree.cb +++ /dev/null @@ -1,180 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on # Link 2 == LDT 2 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 on end # SM 0 - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 off end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c deleted file mode 100644 index 2a10eeb7a8..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - - - - -static unsigned get_bus_conf_done = 0; - -static unsigned get_hcid(unsigned i) -{ - unsigned id = 0; - - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - - unsigned devn = sysconf.hcdn[i] & 0xff; - - struct device *dev; - - dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); - - switch (dev->device) { - case 0x0369: //IO55 - id = 4; - break; - } - - // we may need more way to find out hcid: subsystem id? GPIO read ? - - // we need use id for 1. bus num, 2. mptable, 3. ACPI table - - return id; -} - -void get_bus_conf(void) -{ - unsigned apicid_base; - struct mb_sysconf_t *m; - - int i; - - if (get_bus_conf_done) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - - m->sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - m->bus_mcp55 = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55b */ - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x0f)) - continue; - // check hcid type here - sysconf.hcid[i] = get_hcid(i); - if (!sysconf.hcid[i]) - continue; //unknown co processor - - m->bus_mcp55b = (sysconf.pci1234[1]>>16) & 0xff; - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(2); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_mcp55 = apicid_base+0; - m->apicid_mcp55b = apicid_base+1; -} diff --git a/src/mainboard/nvidia/l1_2pvv/hda_verb.c b/src/mainboard/nvidia/l1_2pvv/hda_verb.c deleted file mode 100644 index 31052f2a15..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/hda_verb.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Tyan Computer - * Copyright (C) 2006-2007 AMD - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0880, // Codec Vendor / Device ID: Realtek ALC880 - 0x00000000, // Subsystem ID - 0x0000000d, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x0000e601 */ - AZALIA_SUBVENDOR(0x0, 0x0000e601), - - /* NID 0x14, FRONT-OUT-L/R */ - AZALIA_PIN_CFG(0x0, 0x14, 0x01014410), - - /* NID 0x15, SURR-OUT-L/R */ - AZALIA_PIN_CFG(0x0, 0x15, 0x01011412), - - /* NID 0x16, CEN/LFE-OUT */ - AZALIA_PIN_CFG(0x0, 0x16, 0x01016011), - - /* NID 0x17, SIDE-SURR-L/R */ - AZALIA_PIN_CFG(0x0, 0x17, 0x01012014), - - /* NID 0x18, MIC1-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x18, 0x01a19c30), - - /* NID 0x19, MIC2-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x19, 0x02a19c40), - - /* NID 0x1a, LINE1-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x1a, 0x01813431), - - /* NID 0x1b, LINE2-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x1b, 0x0221441f), - - /* NID 0x1c, CD-L/R / GND */ - AZALIA_PIN_CFG(0x0, 0x1c, 0x411111f0), - - /* NID 0x1d, PCBEEP */ - AZALIA_PIN_CFG(0x0, 0x1d, 0x9983013e), - - /* NID 0x1e, S/PDIF-OUT */ - AZALIA_PIN_CFG(0x0, 0x1e, 0x01454120), - - /* NID 0x1f, S/PDIF-IN */ - AZALIA_PIN_CFG(0x0, 0x1f, 0x01c59150), -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/nvidia/l1_2pvv/irq_tables.c b/src/mainboard/nvidia/l1_2pvv/irq_tables.c deleted file mode 100644 index 061d276b78..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/irq_tables.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55, ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h b/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h deleted file mode 100644 index 64837f6174..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55; - unsigned char bus_mcp55b; - unsigned apicid_mcp55; - unsigned apicid_mcp55b; - unsigned sbdnb; -}; - -#endif diff --git a/src/mainboard/nvidia/l1_2pvv/mptable.c b/src/mainboard/nvidia/l1_2pvv/mptable.c deleted file mode 100644 index 76d2b81f79..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/mptable.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - int i, j, bus_isa; - unsigned char apicpin[4]; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - - /* Initialize interrupt mapping*/ - dword = pci_read_config32(dev, 0x74); - dword &= ~(1 << 15); - dword |= 1 << 2; - pci_write_config32(dev, 0x74, dword); - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - if (m->bus_mcp55b) { - dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, m->apicid_mcp55b, 0x11, - res2mmio(res, 0, 0)); - - dword = 0x43c60000; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81000000; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00002d0; - pci_write_config32(dev, 0x84, dword); - - } - - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - -//Slot PCIE - for (j = 2; j < 8; j++) { - struct device *dev; - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 0x0a + j - 2 , 0)); - if (!dev || !dev->enabled) - continue; - for (i = 0; i < 4; i++) - apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4; - smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); - } - -//Slot PCI 32 - { - struct device *dev; - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0)); - if (dev && dev->enabled) { - for (i = 0; i < 4; i++) - apicpin[i] = 0x10 + (2+i)%4; - smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); - } - } - - if (m->bus_mcp55b) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|0, m->apicid_mcp55b, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|1, m->apicid_mcp55b, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|2, m->apicid_mcp55b, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+8)<<2)|0, m->apicid_mcp55b, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+9)<<2)|0, m->apicid_mcp55b, 0x15); // 21 - - - //Slot PCIE - for (j = 2; j < 8; j++) { - struct device *dev; - dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x0a + j - 2 , 0)); - if (!dev || !dev->enabled) - continue; - for (i = 0; i < 4; i++) { - apicpin[i] = 0x10 + (2+j+i+4-m->sbdnb%4)%4; - } - smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55b, apicpin); - } - - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/nvidia/l1_2pvv/resourcemap.c b/src/mainboard/nvidia/l1_2pvv/resourcemap.c deleted file mode 100644 index 85782b78da..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, -// PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, -// PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of CPU 0 --> Nvidia MCP55 Pro */ -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of CPU 0 --> nvidia io55 */ - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c deleted file mode 100644 index d6962f0458..0000000000 --- a/src/mainboard/nvidia/l1_2pvv/romstage.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pnp_enter_conf_state(SERIAL_DEV); - pnp_write_config(SERIAL_DEV, 0x24, 0); - pnp_exit_conf_state(SERIAL_DEV); - - setup_mb_resource_map(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/Kconfig b/src/mainboard/siemens/sitemp_g1p1/Kconfig deleted file mode 100644 index d9ad74b212..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -if BOARD_SIEMENS_SITEMP_G1P1 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - select GFXUMA - select EXT_CONF_SUPPORT - -config MAINBOARD_DIR - string - default siemens/sitemp_g1p1 - -config LINT01_CONVERSION - bool - default y - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MB SITEMP-G1 (U1P0/U1P1)" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config IOMMU - bool - default n - -config HW_SCRUBBER - bool - default n - -config ECC_MEMORY - bool - default n - -endif # BOARD_SIEMENS_SITEMP_G1P1 diff --git a/src/mainboard/siemens/sitemp_g1p1/Kconfig.name b/src/mainboard/siemens/sitemp_g1p1/Kconfig.name deleted file mode 100644 index 4c48ecbc2b..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SIEMENS_SITEMP_G1P1 - bool "MB SITEMP-G1 (U1P0/U1P1)" diff --git a/src/mainboard/siemens/sitemp_g1p1/Makefile.inc b/src/mainboard/siemens/sitemp_g1p1/Makefile.inc deleted file mode 100644 index e1348ca423..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/Makefile.inc +++ /dev/null @@ -1,18 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2010 Siemens AG, Inc. -## (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ramstage-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += int15_func.c diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl deleted file mode 100644 index 44c37bb9a0..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - DefinitionBlock ( - "DSDT.AML", - "DSDT", - 0x01, - "XXXXXX", - "XXXXXXXX", - 0x00010001 - ) - { - #include "debug.asl" - } -*/ - -/* -* 0x80: POST_BASE -* 0x3F8: DEBCOM_BASE -* X80: POST_REGION -* P80: PORT80 -* -* CREG: DEBCOM_REGION -* CUAR: DEBCOM_UART -* CDAT: DEBCOM_DATA -* CDLM: DEBCOM_DLM -* DLCR: DEBCOM_LCR -* CMCR: DEBCOM_MCR -* CLSR: DEBCOM_LSR -* -* DEBUG_INIT DINI -*/ - -OperationRegion(X80, SystemIO, 0x80, 1) - Field(X80, ByteAcc, NoLock, Preserve) -{ - P80, 8 -} - -OperationRegion(CREG, SystemIO, 0x3F8, 8) - Field(CREG, ByteAcc, NoLock, Preserve) -{ - CDAT, 8, - CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8 -} - -/* -* DINI -* Initialize the COM port to 115,200 8-N-1 -*/ -Method(DINI) -{ - store(0x83, DLCR) - store(0x01, CDAT) /* 115200 baud (low) */ - store(0x00, CDLM) /* 115200 baud (high) */ - store(0x03, DLCR) /* word=8 stop=1 parity=none */ - store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */ - store(0x00, CDLM) /* turn off interrupts */ -} - -/* -* THRE -* Wait for COM port transmitter holding register to go empty -*/ -Method(THRE) -{ - and(CLSR, 0x20, local0) - while (Lequal(local0, Zero)) { - and(CLSR, 0x20, local0) - } -} - -/* -* OUTX -* Send a single raw character -*/ -Method(OUTX, 1) -{ - THRE() - store(Arg0, CDAT) -} - -/* -* OUTC -* Send a single character, expanding LF into CR/LF -*/ -Method(OUTC, 1) -{ - if (LEqual(Arg0, 0x0a)) { - OUTX(0x0d) - } - OUTX(Arg0) -} - -/* -* DBGN -* Send a single hex nibble -*/ -Method(DBGN, 1) -{ - and(Arg0, 0x0f, Local0) - if (LLess(Local0, 10)) { - add(Local0, 0x30, Local0) - } else { - add(Local0, 0x37, Local0) - } - OUTC(Local0) -} - -/* -* DBGB -* Send a hex byte -*/ -Method(DBGB, 1) -{ - ShiftRight(Arg0, 4, Local0) - DBGN(Local0) - DBGN(Arg0) -} - -/* -* DBGW -* Send a hex word -*/ -Method(DBGW, 1) -{ - ShiftRight(Arg0, 8, Local0) - DBGB(Local0) - DBGB(Arg0) -} - -/* -* DBGD -* Send a hex Dword -*/ -Method(DBGD, 1) -{ - ShiftRight(Arg0, 16, Local0) - DBGW(Local0) - DBGW(Arg0) -} - -/* -* DBGO -* Send either a string or an integer -*/ -Method(DBGO, 1) -{ - /* DINI() */ - if (LEqual(ObjectType(Arg0), 1)) { - if (LGreater(Arg0, 0xffff)) { - DBGD(Arg0) - } else { - if (LGreater(Arg0, 0xff)) { - DBGW(Arg0) - } else { - DBGB(Arg0) - } - } - } else { - Name(BDBG, Buffer(80) {}) - store(Arg0, BDBG) - store(0, Local1) - while (One) { - store(GETC(BDBG, Local1), Local0) - if (LEqual(Local0, 0)) { - return (0) - } - OUTC(Local0) - Increment(Local1) - } - } - return (0) -} - -/* Get a char from a string */ -Method(GETC, 2) -{ - CreateByteField(Arg0, Arg1, DBGC) - return (DBGC) -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl deleted file mode 100644 index fafb0acc2a..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl +++ /dev/null @@ -1,304 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/common/acpi/sleepstates.asl> - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* \_PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) -} /* End Method(\_PTS) */ - -/* -* The following method results in a "not a valid reserved NameSeg" -* warning so I have commented it out for the duration. It isn't -* used, so it could be removed. -* -* -* \_GTS OEM Going To Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -* -* Method(\_GTS, 1) { -* DBGO("\\_GTS\n") -* DBGO("From S0 to S") -* DBGO(Arg0) -* DBGO("\n") -* } -*/ - -/* -* \_BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* \_WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) -} /* End Method(\_WAK) */ - -Scope(\_GPE) { /* Start Scope GPE */ - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event */ - /* SATA Hot Plug Support -> acpi/sata.asl */ -} /* End Scope GPE */ diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl deleted file mode 100644 index bca300d2f0..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope(\_SB) { - #include "globutil.asl" -} -*/ - -/* string compare functions */ -Method(MIN, 2) -{ - if (LLess(Arg0, Arg1)) { - Return(Arg0) - } else { - Return(Arg1) - } -} - -Method(SLEN, 1) -{ - Store(Arg0, Local0) - Return(Sizeof(Local0)) -} - -Method(S2BF, 1) -{ - Add(SLEN(Arg0), One, Local0) - Name(BUFF, Buffer(Local0) {}) - Store(Arg0, BUFF) - Return(BUFF) -} - -/* Strong string compare. Checks both length and content */ -Method(SCMP, 2) -{ - Store(S2BF(Arg0), Local0) - Store(S2BF(Arg1), Local1) - Store(Zero, Local4) - Store(SLEN(Arg0), Local5) - Store(SLEN(Arg1), Local6) - Store(MIN(Local5, Local6), Local7) - - While(LLess(Local4, Local7)) { - Store(Derefof(Index(Local0, Local4)), Local2) - Store(Derefof(Index(Local1, Local4)), Local3) - if (LGreater(Local2, Local3)) { - Return(One) - } else { - if (LLess(Local2, Local3)) { - Return(Ones) - } - } - Increment(Local4) - } - if (LLess(Local4, Local5)) { - Return(One) - } else { - if (LLess(Local4, Local6)) { - Return(Ones) - } else { - Return(Zero) - } - } -} - -/* Weak string compare. Checks to find Arg1 at beginning of Arg0. -* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on -* Pass. -*/ -Method(WCMP, 2) -{ - Store(S2BF(Arg0), Local0) - Store(S2BF(Arg1), Local1) - if (LLess(SLEN(Arg0), SLEN(Arg1))) { - Return(0) - } - Store(Zero, Local2) - Store(SLEN(Arg1), Local3) - - While(LLess(Local2, Local3)) { - if (LNotEqual(Derefof(Index(Local0, Local2)), - Derefof(Index(Local1, Local2)))) { - Return(0) - } - Increment(Local2) - } - Return(One) -} - -/* ARG0 = IRQ Number(0-15) -* Returns Bit Map -*/ -Method(I2BM, 1) -{ - Store(0, Local0) - if (LNotEqual(ARG0, 0)) { - Store(1, Local1) - ShiftLeft(Local1, ARG0, Local0) - } - Return(Local0) -} -Method (SEQL, 2, Serialized) -{ - Store (SizeOf (Arg0), Local0) - Store (SizeOf (Arg1), Local1) - If (LNot (LEqual (Local0, Local1))) { Return (Zero) } - - Name (BUF0, Buffer (Local0) {}) - Store (Arg0, BUF0) - Name (BUF1, Buffer (Local0) {}) - Store (Arg1, BUF1) - Store (Zero, Local2) - While (LLess (Local2, Local0)) - { - Store (DerefOf (Index (BUF0, Local2)), Local3) - Store (DerefOf (Index (BUF1, Local2)), Local4) - If (LNot (LEqual (Local3, Local4))) { Return (Zero) } - - Increment (Local2) - } - - Return (One) -} - -/* GetMemoryResources(Node, Link) */ -Method (GMEM, 2, NotSerialized) -{ - Name (BUF0, ResourceTemplate () - { - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x00000000, // Address Range Minimum - 0x00000000, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00000001,,, - , AddressRangeMemory, TypeStatic) - }) - CreateDWordField (BUF0, 0x0A, MMIN) - CreateDWordField (BUF0, 0x0E, MMAX) - CreateDWordField (BUF0, 0x16, MLEN) - Store (0x00, Local0) - Store (0x00, Local4) - Store (0x00, Local3) - While (LLess (Local0, 0x10)) - { - /* Get value of the first register */ - Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1) - Increment (Local0) - Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2) - If (LEqual (And (Local1, 0x03), 0x03)) /* Pair enabled? */ - { - If (LEqual (Arg0, And (Local2, 0x07))) /* Node matches? */ - { - /* If Link Matches (or we got passed 0xFF) */ - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) - { - /* Extract the Base and Limit values */ - Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) - Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) - Or (MMAX, 0xFFFF, MMAX) - Subtract (MMAX, MMIN, MLEN) - Increment (MLEN) - - If (Local4) /* I've already done this once */ - { - Concatenate (RTAG (BUF0), Local3, Local5) - Store (Local5, Local3) - } - Else - { - Store (RTAG (BUF0), Local3) - } - - Increment (Local4) - } - } - } - - Increment (Local0) - } - - If (LNot (Local4)) /* No resources for this node and link. */ - { - Store (RTAG (BUF0), Local3) - } - - Return (Local3) -} - -Method (RTAG, 1, NotSerialized) -{ - Store (Arg0, Local0) - Store (SizeOf (Local0), Local1) - Subtract (Local1, 0x02, Local1) - Multiply (Local1, 0x08, Local1) - CreateField (Local0, 0x00, Local1, RETB) - Store (RETB, Local2) - Return (Local2) -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl deleted file mode 100644 index 82e54d8e4e..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl +++ /dev/null @@ -1,245 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(IDEC, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(IDEC, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* 0x40: 0:7 Primary PIO Slave Timing */ - PPTM, 8, /* 0x40: 8:15 Primary PIO Master Timing */ - OFFSET(0x04), - PMTS, 8, /* 0x44: 0:7 Primary MWDMA Slave Timing */ - PMTM, 8, /* 0x44: 7:15 Primary MWDMA Master Timing */ - OFFSET(0x08), - PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), - PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), - PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), - PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRIM) -{ - Name (_ADR, 0) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl deleted file mode 100644 index bda467a2c1..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -Name(PCIF, 0) - -Method(_PIC, 1, NotSerialized) -{ - Store(Arg0, PCIF) - If (Arg0) - { - \_SB.PCI0.LPC0.CIRQ() - } -} - -External (\_PR.CP00, DeviceObj) -External (\_PR.CP01, DeviceObj) - -Scope(\_SB) -{ - - Method(_INI, 0) - { - Store (2000, OSYS) - - If (CondRefOf(_OSI)) { - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl deleted file mode 100644 index 926188ce05..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Routing is in System Bus scope */ -Scope(\_SB) -{ - Name(PR0, Package(){ - /* NB devices */ - /* SB devices */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, \_SB.PCI0.LPC0.INTG, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0013FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0013FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0013FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0014FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0014FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0014FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* SB devices in APIC mode */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0005FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0005FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0005FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* PCIe slot - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTC, 0 }, - }) - - Name(APS7, Package(){ - /* PCIe slot - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 1 behind Dev14, Fun4. */ - Package(){0x005FFFF, 0, \_SB.PCI0.LPC0.INTF, 0 }, // Phoenix does it - Package(){0x005FFFF, 1, \_SB.PCI0.LPC0.INTG, 0 }, // Phoenix does it - Package(){0x004FFFF, 0, \_SB.PCI0.LPC0.INTE, 0 }, - Package(){0x004FFFF, 1, \_SB.PCI0.LPC0.INTF, 0 }, - Package(){0x004FFFF, 2, \_SB.PCI0.LPC0.INTG, 0 }, - Package(){0x004FFFF, 3, \_SB.PCI0.LPC0.INTH, 0 }, - }) - - Name(AP2P, Package(){ - /* PCI slots: slot 0 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 21 }, // Phoenix does it - Package(){0x0005FFFF, 1, 0, 22 }, // Phoenix does it - Package(){0x0004FFFF, 0, 0, 20 }, - Package(){0x0004FFFF, 1, 0, 21 }, - Package(){0x0004FFFF, 2, 0, 22 }, - Package(){0x0004FFFF, 3, 0, 23 }, - }) - -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl deleted file mode 100644 index 286d20a700..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl deleted file mode 100644 index 3de9620c71..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -/* Status and notification definitions */ - -#define STA_MISSING 0x00 -#define STA_PRESENT 0x01 -#define STA_ENABLED 0x03 -#define STA_DISABLED 0x09 -#define STA_INVISIBLE 0x0B -#define STA_UNAVAILABLE 0x0D -#define STA_VISIBLE 0x0F - -/* SMBus status codes */ -#define SMB_OK 0x00 -#define SMB_UnknownFail 0x07 -#define SMB_DevAddrNAK 0x10 -#define SMB_DeviceError 0x11 -#define SMB_DevCmdDenied 0x12 -#define SMB_UnknownErr 0x13 -#define SMB_DevAccDenied 0x17 -#define SMB_Timeout 0x18 -#define SMB_HstUnsuppProtocol 0x19 -#define SMB_Busy 0x1A -#define SMB_PktChkError 0x1F - -/* Device Object Notification Values */ -#define NOTIFY_BUS_CHECK 0x00 -#define NOTIFY_DEVICE_CHECK 0x01 -#define NOTIFY_DEVICE_WAKE 0x02 -#define NOTIFY_EJECT_REQUEST 0x03 -#define NOTIFY_DEVICE_CHECK_JR 0x04 -#define NOTIFY_FREQUENCY_ERROR 0x05 -#define NOTIFY_BUS_MODE 0x06 -#define NOTIFY_POWER_FAULT 0x07 -#define NOTIFY_CAPABILITIES 0x08 -#define NOTIFY_PLD_CHECK 0x09 -#define NOTIFY_SLIT_UPDATE 0x0B - -/* Battery Device Notification Values */ -#define NOTIFY_BAT_STATUSCHG 0x80 -#define NOTIFY_BAT_INFOCHG 0x81 -#define NOTIFY_BAT_MAINTDATA 0x82 - -/* Power Source Object Notification Values */ -#define NOTIFY_PWR_STATUSCHG 0x80 - -/* Thermal Zone Object Notification Values */ -#define NOTIFY_TZ_STATUSCHG 0x80 -#define NOTIFY_TZ_TRIPPTCHG 0x81 -#define NOTIFY_TZ_DEVLISTCHG 0x82 -#define NOTIFY_TZ_RELTBLCHG 0x83 - -/* Power Button Notification Values */ -#define NOTIFY_POWER_BUTTON 0x80 - -/* Sleep Button Notification Values */ -#define NOTIFY_SLEEP_BUTTON 0x80 - -/* Lid Notification Values */ -#define NOTIFY_LID_STATUSCHG 0x80 - -/* Processor Device Notification Values */ -#define NOTIFY_CPU_PPCCHG 0x80 -#define NOTIFY_CPU_CSTATECHG 0x81 -#define NOTIFY_CPU_THROTLCHG 0x82 - -/* User Presence Device Notification Values */ -#define NOTIFY_USR_PRESNCECHG 0x80 - -/* Battery Device Notification Values */ -#define NOTIFY_ALS_ILLUMCHG 0x80 -#define NOTIFY_ALS_COLORTMPCHG 0x81 -#define NOTIFY_ALS_RESPCHG 0x82 diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl deleted file mode 100644 index 188c91e57a..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -/* THERMAL */ -Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - // Processors used for active cooling - Method (_PSL, 0, Serialized) - { - If (MPEN) { - Return (Package() {\_PR.CP00, \_PR.CP01}) - } - Return (Package() {\_PR.CP00}) - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl deleted file mode 100644 index 54613a8b41..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB_.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB_.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB_.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB_.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB_.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB_.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB_.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB_.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB_.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB_.PT9D) - } - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c deleted file mode 100644 index 0ced54b457..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <compiler.h> -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <../../../northbridge/amd/amdk8/acpi.h> -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> -#include <southbridge/amd/rs690/rs690.h> -#include "mainboard.h" -#include <cbmem.h> - -#define GLOBAL_VARS_SIZE 0x100 - -typedef struct { - /* Miscellaneous */ - u16 osys; - u16 linx; - u32 pcba; - u8 mpen; - u8 reserv[247]; -} __packed global_vars_t; - -static void acpi_write_gvars(global_vars_t *gvars) -{ - struct device *dev; - struct resource *res; - - memset((void *)gvars, 0, GLOBAL_VARS_SIZE); - - gvars->pcba = EXT_CONF_BASE_ADDRESS; - dev = dev_find_slot(0, PCI_DEVFN(0,0)); - res = probe_resource(dev, 0x1C); - if( res ) - gvars->pcba = res->base; - - gvars->mpen = 1; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); -#if !IS_ENABLED(CONFIG_LINT01_CONVERSION) - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); -#else - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - /* 1: LINT1 connect to NMI */ - set_nbcfg_enable_bits(dev_find_slot(0, PCI_DEVFN(0x18, 0)), 0x68, 1 << 16, 1 << 16); // Local Interrupt Conversion Enable -#endif - return current; -} - -void mainboard_inject_dsdt(struct device *device) -{ - global_vars_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, GLOBAL_VARS_SIZE); - - if (gnvs) { - memset(gnvs, 0, sizeof(*gnvs)); - acpi_write_gvars(gnvs); - - /* Add it to SSDT. */ - acpigen_write_scope("\\"); - acpigen_write_name_dword("NVSA", (u32) gnvs); - acpigen_pop_len(); - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/board_info.txt b/src/mainboard/siemens/sitemp_g1p1/board_info.txt deleted file mode 100644 index 7680e6f854..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/siemens/sitemp_g1p1/cmos.default b/src/mainboard/siemens/sitemp_g1p1/cmos.default deleted file mode 100644 index 3440a20c10..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/cmos.default +++ /dev/null @@ -1,23 +0,0 @@ -boot_option=Fallback -cmos_defaults_loaded=Yes -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -sata_mode=AHCI -boot_devices='' -multi_core=Enable -cpu_fan_control=Disable -chassis_fan_control=Disable -cpu_fan_polarity=Active_high -chassis_fan_polarity=Active_high -cpu_t_min=45 -cpu_t_max=65 -cpu_dutycycle_min=30% -cpu_dutycycle_max=90% -chassis_t_min=40 -chassis_t_max=70 -chassis_dutycycle_min=25% -chassis_dutycycle_max=90% -lcd_panel_id=no_panel -boot_delay=off -boot_default=0 diff --git a/src/mainboard/siemens/sitemp_g1p1/cmos.layout b/src/mainboard/siemens/sitemp_g1p1/cmos.layout deleted file mode 100644 index f7571cc309..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/cmos.layout +++ /dev/null @@ -1,172 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## Copyright (C) 2010 Siemens AG, Inc. -## (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -# ======================================================= -# ======================================================= -# ======================================================== -0 384 r 0 reserved_memory -# ======================================================== -#384 1 r 0 unused -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -#386 1 r 1 unused -387 1 e 16 cmos_defaults_loaded -388 4 h 0 reboot_counter -#392 3 r 0 unused -#395 1 r 1 unused -#396 1 r 1 unused -#397 2 r 8 unused -399 1 e 2 multi_core -#400 8 r 18 reserved -408 4 e 6 debug_level -412 1 e 1 power_on_after_fail -#413 1 r 1 unused -414 1 e 17 sata_mode -415 1 e 1 nmi -416 1 e 1 cpu_fan_control -417 1 e 1 chassis_fan_control -418 1 e 13 cpu_fan_polarity -419 1 e 13 chassis_fan_polarity -420 4 e 14 cpu_t_min -424 4 e 14 cpu_t_max -428 4 e 15 cpu_dutycycle_min -432 4 e 15 cpu_dutycycle_max - -436 4 e 14 chassis_t_min -440 4 e 14 chassis_t_max - -444 4 e 15 chassis_dutycycle_min - -448 4 e 15 chassis_dutycycle_max - -#452 4 r 9 unused - -456 4 e 10 boot_delay -460 4 e 11 lcd_panel_id -#=========================================================== -464 512 s 0 boot_devices -976 8 h 0 boot_default -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 4 Warning -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -# boot delay -10 0 off -10 1 1s -10 2 2s -10 3 3s -10 4 4s -10 5 5s -10 6 6s -10 7 7s -10 8 8s -10 9 9s -10 10 10s -# LCD Panel ID -11 0 no_panel -11 1 1024x768_65MHz_Dual -11 2 1920x1200_162MHz -11 3 1600x1200_162MHz -11 4 1024x768_65MHz -11 5 1400x1050_108MHz -11 6 1680x1050_119MHz -11 7 2048x1536_164MHz -11 8 1280x1024_108MHz -11 9 1366x768_86MHz_chimei_V32B1L01 -# TV Standard -#12 0 NTSC -#12 1 PAL -#12 2 PALM -#12 3 PAL60 -#12 4 NTSCJ -#12 5 PALCN -#12 6 PALN -#12 9 SCART-RGB -#12 15 no_tv -# CPU/Chassis FAN Control: polarity -13 0 Active_high -13 1 Active_low -# Temperature °C -14 0 30 -14 1 35 -14 2 40 -14 3 45 -14 4 50 -14 5 55 -14 6 60 -14 7 65 -14 8 70 -14 9 75 -14 10 80 -14 11 85 -14 12 90 -14 13 95 -14 14 100 -# Dutycycle % -15 0 25% -15 1 30% -15 2 35% -15 3 40% -15 4 45% -15 5 50% -15 6 55% -15 7 60% -15 8 65% -15 9 70% -15 10 75% -15 11 80% -15 12 85% -15 13 90% -15 14 95% -15 15 100% -# cmos_defaults_loaded -16 0 No -16 1 Yes -# sata_mode -17 0 AHCI -17 1 IDE -# reserved -18 32 2000 -# ============================== -checksums - -checksum 392 983 984 diff --git a/src/mainboard/siemens/sitemp_g1p1/devicetree.cb b/src/mainboard/siemens/sitemp_g1p1/devicetree.cb deleted file mode 100644 index e47703f738..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/devicetree.cb +++ /dev/null @@ -1,134 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x110a 0x4076 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on # Northbridge configuration space (0x7910) - end - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on # Internal Graphics 0x791F - end - device pci 5.2 on # - end - end - device pci 2.0 on # PCIE P2P bridge 0x7913 (external GFX-port0) - end - device pci 3.0 off # PCIE P2P bridge 0x791b (external GFX-port1) - end - device pci 4.0 on # PCIE P2P bridge port 0 (0x7914) - end - device pci 5.0 on # PCIE P2P bridge port 1 (0x7915) - end - device pci 6.0 on # PCIE P2P bridge port 2 (0x7916) - end - device pci 7.0 on # PCIE P2P bridge port 3 (0x7917) - end - device pci 8.0 off # NB/SB Link P2P bridge - end - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "1" # needed for DVI output, but this results in a conflict if PLX installed ! - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" # 4 (0x8) if PLX installed - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e -# register "ide0_enable" = "1" -# register "sata0_enable" = "1" - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/siemens/sitemp_g1p1/dsdt.asl b/src/mainboard/siemens/sitemp_g1p1/dsdt.asl deleted file mode 100644 index 121aaf9edd..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/dsdt.asl +++ /dev/null @@ -1,1211 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <arch/ioapic.h> -#include <cpu/x86/lapic_def.h> -#include <southbridge/amd/sb600/sb600.h> - -DefinitionBlock ("DSDT.aml", "DSDT", 2, "SIEMEN", "SITEMP ", 0x20101005) -{ - /* Data to be patched by the BIOS during POST */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - Name(DSEN, 1) // Display Output Switching Enable - // Power notification - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - SINT, 0x00000008, /* Index 4 */ - Offset(0x09), - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - External(\NVSA) - - OperationRegion (GVAR, SystemMemory, \NVSA, 0x100) - Field (GVAR, ByteAcc, NoLock, Preserve) - { - Offset (0x00), - OSYS, 16, - LINX, 16, - PCBA, 32, - MPEN, 8 - } - - Name (IOLM,0xe0000000) - -#include "acpi/platform.asl" - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x2000000) /* PCIe reserved space for 31 busses */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - Offset(0x00090024), /* Byte offset to SATA BAR5 register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(BAR5, SystemMemory, STB5, 0x1000) - Field(BAR5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } -#include "acpi/event.asl" -#include "acpi/routing.asl" -#include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) - { - /* Start \_SB scope */ - -#include "acpi/globutil.asl" - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) - { - External (MMIO) - External (TOM1) - External (TOM2) - - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Device (MEMR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (MEM1, ResourceTemplate () - { - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x00000000, // Address Length - _Y1A) - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x00000000, // Address Length - _Y1B) - }) - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1A._BAS, MB01) - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1A._LEN, ML01) - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1B._BAS, MB02) - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1B._LEN, ML02) - If (PCIF) - { - Store (IO_APIC_ADDR, MB01) - Store (LOCAL_APIC_ADDR, MB02) - Store (0x1000, ML01) - Store (0x1000, ML02) - } - - Return (MEM1) - } - } - - Method(_PRT,0) { - If(PCIF){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - OperationRegion (BAR1, PCI_Config, 0x14, 0x04) - Field (BAR1, ByteAcc, NoLock, Preserve) - { - Z009, 32 - } - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { Return (APR1) } - - Device (VGA) - { - Name (_ADR, 0x00050000) - Method (_DOS, 1) - { - /* Windows 2000 and Windows XP call _DOS to enable/disable - * Display Output Switching during init and while a switch - * is already active - */ - Store (And(Arg0, 7), DSEN) - } - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* PCI slot 1 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {4, 5}) // Phoenix doeas it so - Method(_PRT, 0) { - If(PCIF){ Return(AP2P) } /* APIC Mode */ - Return (PCIB) /* PIC Mode */ - } - } - - /* Describe the Southbridge devices */ - Device(SATA) { - Name(_ADR, 0x00120000) -#include "acpi/sata.asl" - } /* end SATA */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(LINX,1)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LPC0) - { - Name (_ADR, 0x00140003) - Mutex (PSMX, 0x00) - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - SINT, 0x00000008, /* Index 4 */ - Offset(0x09), - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, SINT) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){10,11} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINA, IRQ0) - Return(Local0) - } /* Method(_SB.INTA._CRS) */ - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement (Local0) - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINB, IRQ0) - Return(Local0) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINC, IRQ0) - Return(Local0) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PIND, IRQ0) - Return(Local0) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINE, IRQ0) - Return(Local0) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINF, IRQ0) - Return(Local0) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PING, IRQ0) - Return(Local0) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINH, IRQ0) - Return(Local0) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible)*/ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {8} - IO(Decode16,0x0070, 0x0070, 1, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {0} - IO(Decode16, 0x0040, 0x0040, 1, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 1, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {2} - IO(Decode16,0x0020, 0x0020, 1, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,NotBusMaster,Transfer8_16){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 1, 0x10) - IRQ (Edge, ActiveHigh, Exclusive, ) {13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPET) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } - - Device (KBC0) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0060, // Range Minimum - 0x0060, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IO (Decode16, - 0x0064, // Range Minimum - 0x0064, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IRQ (Edge, ActiveHigh, Exclusive, ) {1} - }) - } - - Device (MSE0) - { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () - { - IRQ (Edge, ActiveHigh, Exclusive, ) {12} - }) - } - } /* end LPC0 */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - Name (_PRW, Package (0x02) - { - 0x0C, - 0x04 - }) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - Name (_PRW, Package (0x02) - { - 0x0C, - 0x04 - }) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - -/* ############################################################################################### */ - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - DWORDMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0, 0, 0, 0x00, 1, ,, EMM2) - WORDIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x00, 0x0D00, 0xffff, 0x00, 0xf300) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - - CreateDWordField(CRES, ^EMM2._MIN, EM2B) - CreateDWordField(CRES, ^EMM2._MAX, EM2E) - CreateDWordField(CRES, ^EMM2._LEN, EM2L) - - Store(TOM1, EM2B) - Subtract(IOLM, 1, EM2E) - Subtract(IOLM, TOM1, EM2L) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - Return(CRES) /* note to change the Name buffer */ - } -/* ########################################################################################## */ - } /* End Device(PCI0) */ - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - -#include <southbridge/amd/cimx/sb800/acpi/smbus.asl> -#include "acpi/thermal.asl" -} diff --git a/src/mainboard/siemens/sitemp_g1p1/fadt.c b/src/mainboard/siemens/sitemp_g1p1/fadt.c deleted file mode 100644 index 360a427c21..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/fadt.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include <../southbridge/amd/sb600/sb600.h> - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->oem_revision = 0x20101005; - header->asl_compiler_revision = 3; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1 << 3 | 0 << 2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1 << 1 | 1 << 3| 1 << 5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c b/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.c b/src/mainboard/siemens/sitemp_g1p1/int15_func.c deleted file mode 100644 index b01a292411..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <console/console.h> -#include <arch/interrupt.h> -#include <x86emu/regs.h> -#include "int15_func.h" - -int sbios_INT15_handler(void); -/*extern*/ unsigned long vgainfo_addr; - -static INT15_function_extensions __int15_func; - -/* System BIOS int15 function */ -int sbios_INT15_handler(void) -{ - int res = -1; - - printk(BIOS_DEBUG, "System BIOS INT 15h\n"); - - switch (X86_EAX & 0xffff) { -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - case 0x5f35: - X86_EAX = 0x5f; - X86_ECX = BOOT_DISPLAY_DEFAULT; - res = 0; - break; - case 0x5f40: - X86_EAX = 0x5f; - X86_ECX = 3; // This is mainboard specific - printk(BIOS_DEBUG, "DISPLAY=%x\n", X86_ECX); - res = 0; - break; - case 0x4e08: - switch (X86_EBX & 0xff) { - case 0x00: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func00_LCD_panel_id; - printk(BIOS_DEBUG, "DISPLAY = %x\n", X86_EBX & 0xff); - res = 0; - break; - case 0x02: - break; - case 0x05: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func05_TV_standard; - printk(BIOS_DEBUG, "TV = %x\n", X86_EBX & 0xff); - res = 0; - break; - case 0x80: - X86_EAX &= ~(0xff); - X86_EBX &= ~(0xff); - printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", X86_EDX, X86_EDI); - vgainfo_addr = (X86_EDX * 16) + X86_EDI; - res = 0; - break; - case 0x89: - X86_EAX &= ~(0xff); - X86_EBX &= ~(0xff); - printk(BIOS_DEBUG, "Get supported display device information\n"); - res = 0; - break; - default: - break; - } - break; - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", X86_EAX & 0xffff); - break; - } - - return res; -} - -/* Initialization VBIOS function extensions */ -void install_INT15_function_extensions(INT15_function_extensions *int15_func) -{ - printk(BIOS_DEBUG, "Initialize function extensions for Callback function number 04E08h ..\n"); - __int15_func.regs.func00_LCD_panel_id = int15_func->regs.func00_LCD_panel_id; - __int15_func.regs.func05_TV_standard = int15_func->regs.func05_TV_standard; - mainboard_interrupt_handlers(0x15, &sbios_INT15_handler); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.h b/src/mainboard/siemens/sitemp_g1p1/int15_func.h deleted file mode 100644 index 298b9d1690..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -typedef struct { - u8 func00_LCD_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID - u8 func02_set_expansion; - u8 func05_TV_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard - u16 func80_sysinfo_table; -}INT15_regs; - -typedef struct { - INT15_regs regs; -}INT15_function_extensions; - -extern void install_INT15_function_extensions(INT15_function_extensions *); diff --git a/src/mainboard/siemens/sitemp_g1p1/irq_tables.c b/src/mainboard/siemens/sitemp_g1p1/irq_tables.c deleted file mode 100644 index dccbe12243..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/irq_tables.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, - 0); - pirq_info++; - slot_num++; - - /* ide */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 1, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c deleted file mode 100644 index d4cb5828a7..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ /dev/null @@ -1,825 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <delay.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <pc80/mc146818rtc.h> -#include <cpu/x86/lapic.h> -#include <southbridge/amd/sb600/sb600.h> -#include <southbridge/amd/rs690/chip.h> -#include <southbridge/amd/rs690/rs690.h> -#include <superio/ite/it8712f/it8712f.h> -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) -#include <x86emu/x86emu.h> -#endif -#include "int15_func.h" -#include "mainboard.h" - -// ****LCD panel ID support: ***** -// Callback Sub-Function 00h - Get LCD Panel ID -#define PANEL_TABLE_ID_NO 0 // no LCD -#define PANEL_TABLE_ID1 1 // 1024x768_65MHz_Dual -#define PANEL_TABLE_ID2 2 // 920x1200_162MHz -#define PANEL_TABLE_ID3 3 // 600x1200_162MHz -#define PANEL_TABLE_ID4 4 // 1024x768_65MHz -#define PANEL_TABLE_ID5 5 // 1400x1050_108MHz -#define PANEL_TABLE_ID6 6 // 1680x1050_119MHz -#define PANEL_TABLE_ID7 7 // 2048x1536_164MHz -#define PANEL_TABLE_ID8 8 // 1280x1024_108MHz -#define PANEL_TABLE_ID9 9 // 1366x768_86MHz_chimei_V32B1L01 - -// Callback Sub-Function 05h - Select Boot-up TV Standard -#define TV_MODE_00 0x00 /* NTSC */ -#define TV_MODE_01 0x01 /* PAL */ -#define TV_MODE_02 0x02 /* PALM */ -#define TV_MODE_03 0x03 /* PAL60 */ -#define TV_MODE_04 0x04 /* NTSCJ */ -#define TV_MODE_05 0x05 /* PALCN */ -#define TV_MODE_06 0x06 /* PALN */ -#define TV_MODE_09 0x09 /* SCART-RGB */ -#define TV_MODE_NO 0xff /* No TV Support */ - -#define PLX_VIDDID 0x861610b5 - -/* 7475 Common Registers */ -#define REG_DEVREV2 0x12 /* ADT7490 only */ -#define REG_VTT 0x1E /* ADT7490 only */ -#define REG_EXTEND3 0x1F /* ADT7490 only */ -#define REG_VOLTAGE_BASE 0x20 -#define REG_TEMP_BASE 0x25 -#define REG_TACH_BASE 0x28 -#define REG_PWM_BASE 0x30 -#define REG_PWM_MAX_BASE 0x38 -#define REG_DEVID 0x3D -#define REG_VENDID 0x3E -#define REG_DEVID2 0x3F -#define REG_STATUS1 0x41 -#define REG_STATUS2 0x42 -#define REG_VID 0x43 /* ADT7476 only */ -#define REG_VOLTAGE_MIN_BASE 0x44 -#define REG_VOLTAGE_MAX_BASE 0x45 -#define REG_TEMP_MIN_BASE 0x4E -#define REG_TEMP_MAX_BASE 0x4F -#define REG_TACH_MIN_BASE 0x54 -#define REG_PWM_CONFIG_BASE 0x5C -#define REG_TEMP_TRANGE_BASE 0x5F -#define REG_PWM_MIN_BASE 0x64 -#define REG_TEMP_TMIN_BASE 0x67 -#define REG_TEMP_THERM_BASE 0x6A -#define REG_REMOTE1_HYSTERSIS 0x6D -#define REG_REMOTE2_HYSTERSIS 0x6E -#define REG_TEMP_OFFSET_BASE 0x70 -#define REG_CONFIG2 0x73 -#define REG_EXTEND1 0x76 -#define REG_EXTEND2 0x77 -#define REG_CONFIG1 0x40 // ADT7475 -#define REG_CONFIG3 0x78 -#define REG_CONFIG5 0x7C -#define REG_CONFIG6 0x10 // ADT7475 -#define REG_CONFIG7 0x11 // ADT7475 -#define REG_CONFIG4 0x7D -#define REG_STATUS4 0x81 /* ADT7490 only */ -#define REG_VTT_MIN 0x84 /* ADT7490 only */ -#define REG_VTT_MAX 0x86 /* ADT7490 only */ - -#define VID_VIDSEL 0x80 /* ADT7476 only */ - -#define CONFIG2_ATTN 0x20 -#define CONFIG3_SMBALERT 0x01 -#define CONFIG3_THERM 0x02 -#define CONFIG4_PINFUNC 0x03 -#define CONFIG4_MAXDUTY 0x08 -#define CONFIG4_ATTN_IN10 0x30 -#define CONFIG4_ATTN_IN43 0xC0 -#define CONFIG5_TWOSCOMP 0x01 -#define CONFIG5_TEMPOFFSET 0x02 -#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ -#define REMOTE1 0 -#define LOCAL 1 -#define REMOTE2 2 - -/* ADT7475 Settings */ -#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ -#define ADT7475_TEMP_COUNT 3 -#define ADT7475_TACH_COUNT 4 -#define ADT7475_PWM_COUNT 3 - -/* Macros to easily index the registers */ -#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2)) -#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2)) - -#define PWM_REG(idx) (REG_PWM_BASE + (idx)) -#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx)) -#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx)) -#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx)) - -#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx)) -#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2)) -#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2)) - -#define TEMP_REG(idx) (REG_TEMP_BASE + (idx)) -#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2)) -#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2)) -#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx)) -#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx)) -#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) -#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) - -#define SMBUS_IO_BASE 0x1000 -#define ADT7475_ADDRESS 0x2E - -#define D_OPEN (1 << 6) -#define D_CLS (1 << 5) -#define D_LCK (1 << 4) -#define G_SMRAME (1 << 3) -#define A_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) // 0x2: SMM space at 640KB-768KB - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); - -static u32 smbus_io_base = SMBUS_IO_BASE; -static u32 adt7475_address = ADT7475_ADDRESS; - -/* Macro to read the registers */ -#define adt7475_read_byte(reg) \ - do_smbus_read_byte(smbus_io_base, adt7475_address, reg) - -#define adt7475_write_byte(reg, val) \ - do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val) - -#define TWOS_COMPL 1 - -struct __table__{ - const char *info; - u8 val; -}; - -struct __table__ dutycycles[] = { - {"25%", 0x3f},{"30%", 0x4c},{"35%", 0x59},{"40%", 0x66},{"45%", 0x73}, - {"50%", 0x80},{"55%", 0x8d},{"60%", 0x9a},{"65%", 0xa7},{"70%", 0xb4}, - {"75%", 0xc1},{"80%", 0xce},{"85%", 0xdb},{"90%", 0xe8},{"95%", 0xf5}, - {"100%", 0xff} -}; -#define SIZEOF_DUTYCYCLES sizeof(dutycycles)/sizeof(struct __table__) -#define DUTYCYCLE(i,d) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].val : dutycycles[d].val // hopefully d is a correct value !!! fix -#define DUTYCYCLE_INFO(i) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].info : "out_of_range" -#if TWOS_COMPL == 0 -struct __table__ temperatures[] = { - {"30C", 0x5e},{"35C", 0x63},{"40C", 0x68},{"45C", 0x6d},{"50C", 0x72}, - {"55C", 0x77},{"60C", 0x7c},{"65C", 0x81},{"70C", 0x86},{"75C", 0x8b}, - {"80C", 0x90} -}; -#else -struct __table__ temperatures[] = { - {"30C", 30},{"35C", 35},{"40C", 40},{"45C", 45},{"50C", 50}, - {"55C", 55},{"60C", 60},{"65C", 65},{"70C", 70},{"75C", 75}, - {"80C", 80} -}; -#endif -// FIXME: implicit conversion from 'double' to 'int' -// int trange[] = {2.0,2.5,3.33,4.0,5.0,6.67,8.0,10.0,13.33,16.0,20.0,26.67,32.0,40.0,53.33,80.0}; -int trange[] = {2,2,3,4,5,6,8,10,13,16,20,26,32,40,53,80}; - -#define SIZEOF_TEMPERATURES sizeof(temperatures)/sizeof(struct __table__) -#define TEMPERATURE(i,d) (i < SIZEOF_TEMPERATURES) ? temperatures[i].val : temperatures[d].val // hopefully d is a correct value !!! fix -#define TEMPERATURE_INFO(i) (i < SIZEOF_TEMPERATURES) ? temperatures[i].info : "out of range" - -struct fan_control { - unsigned int enable : 1; - u8 polarity; - u8 t_min; - u8 t_max; - u8 pwm_min; - u8 pwm_max; - u8 t_range; -}; -/* ############################################################################################# */ -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) -static int int15_handler(void) -{ -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - - printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", - __func__, X86_AX, X86_BX, X86_CX, X86_DX); - - switch (X86_AX) { - case 0x4e08: /* Boot Display */ - switch (X86_BX) { - case 0x80: - X86_AX &= ~(0xff); // Success - X86_BX &= ~(0xff); - printk(BIOS_DEBUG, "Integrated System Information\n"); - break; - case 0x00: - X86_AX &= ~(0xff); - X86_BX = 0x00; - printk(BIOS_DEBUG, "Panel ID = 0\n"); - break; - case 0x05: - X86_AX &= ~(0xff); - X86_BX = 0xff; - printk(BIOS_DEBUG, "TV = off\n"); - break; - default: - return 0; - } - break; - case 0x5f35: /* Boot Display */ - X86_AX = 0x005f; // Success - X86_CL = BOOT_DISPLAY_DEFAULT; - break; - case 0x5f40: /* Boot Panel Type */ - // M.x86.R_AX = 0x015f; // Supported but failed - X86_AX = 0x005f; // Success - X86_CL = 3; // Display ID - break; - default: - /* Interrupt was not handled */ - return 0; - } - - /* Interrupt handled */ - return 1; -} -#endif -/* ############################################################################################# */ - -static u8 calc_trange(u8 t_min, u8 t_max) { - - u8 prev; - int i; - int diff = t_max - t_min; - - // walk through the trange table - for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) { - if( trange[i] < diff ) { - prev = i; // save last val - continue; - } - if( diff == trange[i] ) return i; - if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index - return i; - } - return prev; -} - -/******************************************************** -* sina uses SB600 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void cable_detect(void) -{ - - u8 byte; - struct device *sm_dev; - struct device *ide_dev; - - /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */ - printk(BIOS_DEBUG, "%s.\n", __func__); - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - /* IDE Controller (Device 20, Function 1) on SB600 */ - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - - byte = pci_read_config8(ide_dev, 9); - printk(BIOS_INFO, "IDE controller in %s Mode\n", byte & (1 << 0) ? "Native" : "Compatibility"); - - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if( pci_read_config8(sm_dev, 0xAA) & (1 << 5) ) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - printk(BIOS_INFO, "DMA mode %d selected\n", byte & (7 << 0)); - pci_write_config8(ide_dev, 0x56, byte); -} - -/** - * @brief Detect the ADT7475 device - * - */ - -static const char * adt7475_detect( void ) { - - int vendid, devid, devid2; - const char *name = NULL; - - vendid = adt7475_read_byte(REG_VENDID); - devid2 = adt7475_read_byte(REG_DEVID2); - if (vendid != 0x41 || (devid2 & 0xf8) != 0x68) /* Analog Devices */ - return name; - - devid = adt7475_read_byte(REG_DEVID); - if (devid == 0x73) - name = "adt7473"; - else if (devid == 0x75 && adt7475_address == 0x2e) - name = "adt7475"; - else if (devid == 0x76) - name = "adt7476"; - else if ((devid2 & 0xfc) == 0x6c) - name = "adt7490"; - - return name; -} - -// thermal control defaults -const struct fan_control cpu_fan_control_defaults = { - .enable = 0, // disable by default - .polarity = 0, // high by default - .t_min = 3, // default = 45°C - .t_max = 7, // 65°C - .pwm_min = 1, // default dutycycle = 30% - .pwm_max = 13, // 90% -}; -const struct fan_control case_fan_control_defaults = { - .enable = 0, // disable by default - .polarity = 0, // high by default - .t_min = 2, // default = 40°C - .t_max = 8, // 70°C - .pwm_min = 0, // default dutycycle = 25% - .pwm_max = 13, // 90% -}; - -static void pm_init( void ) -{ - u16 word; - u8 byte; - struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to tristate */ - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* set GPM5 to not wake from s5 */ - byte = pm_ioread(0x77); - byte &= ~(1 << 5); - pm_iowrite(0x77, byte); -} - - /** - * @brief Setup thermal config on SINA Mainboard - * - */ - -static void set_thermal_config(void) -{ - u8 byte, byte2; - u8 cpu_pwm_conf, case_pwm_conf; - struct device *sm_dev; - struct fan_control cpu_fan_control, case_fan_control; - const char *name = NULL; - - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE - - if( (name = adt7475_detect()) == NULL ) { - printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address); - return; - } - printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address); - - cpu_fan_control = cpu_fan_control_defaults; - case_fan_control = case_fan_control_defaults; - - if (get_option(&byte, "cpu_fan_control") == CB_CMOS_CHECKSUM_INVALID) { - printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__); - } else { - // get all the options needed - if( get_option(&byte, "cpu_fan_control") == CB_SUCCESS ) - cpu_fan_control.enable = byte ? 1 : 0; - - get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); - get_option(&cpu_fan_control.t_min, "cpu_t_min"); - get_option(&cpu_fan_control.t_max, "cpu_t_max"); - get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min"); - get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max"); - - if( get_option(&byte, "chassis_fan_control") == CB_SUCCESS) - case_fan_control.enable = byte ? 1 : 0; - get_option(&case_fan_control.polarity, "chassis_fan_polarity"); - get_option(&case_fan_control.t_min, "chassis_t_min"); - get_option(&case_fan_control.t_max, "chassis_t_max"); - get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min"); - get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max"); - - } - - printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable"); - printk(BIOS_DEBUG, " cpu_fan_polarity:%s", cpu_fan_control.polarity ? "low" : "high"); - - printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min)); - cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min); - - printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max)); - cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max); - - printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min)); - cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min); - - printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max)); - cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max); - - cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max); - printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range); - cpu_fan_control.t_range <<= 4; - cpu_fan_control.t_range |= (4 << 0); // 35.3Hz - - printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable"); - printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high"); - - printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min)); - case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min); - - printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max)); - case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max); - - printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min)); - case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min); - - printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max)); - case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max); - - case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max); - printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range); - case_fan_control.t_range <<= 4; - case_fan_control.t_range |= (4 << 0); // 35.3Hz - - cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control - case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp - - /* set adt7475 */ - - adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only - - /* Config Register 6: */ - adt7475_write_byte(REG_CONFIG6, 0x00); - /* Config Register 7 */ - adt7475_write_byte(REG_CONFIG7, 0x00); - - /* Config Register 5: */ - /* set Offset 64 format, enable THERM on Remote 1& Local */ - adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); - /* No offset for remote 1 */ - adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00); - /* No offset for local */ - adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00); - /* No offset for remote 2 */ - adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00); - - /* remote 1 low temp limit */ - adt7475_write_byte(TEMP_MIN_REG(0), 0x00); - /* remote 1 High temp limit (90C) */ - adt7475_write_byte(TEMP_MAX_REG(0), 0x9a); - - /* local Low Temp Limit */ - adt7475_write_byte(TEMP_MIN_REG(1), 0x00); - /* local High Limit (90C) */ - adt7475_write_byte(TEMP_MAX_REG(1), 0x9a); - - /* remote 1 therm temp limit (95C) */ - adt7475_write_byte(TEMP_THERM_REG(0), 0x9f); - /* local therm temp limit (95C) */ - adt7475_write_byte(TEMP_THERM_REG(1), 0x9f); - - /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ - adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf); - /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */ - adt7475_write_byte(PWM_CONFIG_REG(2), case_pwm_conf); - - if( cpu_fan_control.enable ) { - /* PWM 1 minimum duty cycle (37%) */ - adt7475_write_byte(PWM_MIN_REG(0), cpu_fan_control.pwm_min); - /* PWM 1 Maximum duty cycle (100%) */ - adt7475_write_byte(PWM_MAX_REG(0), cpu_fan_control.pwm_max); - /* Remote 1 temperature Tmin (32C) */ - adt7475_write_byte(TEMP_TMIN_REG(0), cpu_fan_control.t_min); - /* remote 1 Trange (53C ramp range) */ - adt7475_write_byte(TEMP_TRANGE_REG(0), cpu_fan_control.t_range); - } else { - adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max); - } - - if( case_fan_control.enable ) { - /* PWM 2 minimum duty cycle (37%) */ - adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min); - /* PWM 2 Maximum Duty Cycle (100%) */ - adt7475_write_byte(PWM_MAX_REG(2), case_fan_control.pwm_max); - /* local temperature Tmin (32C) */ - adt7475_write_byte(TEMP_TMIN_REG(1), case_fan_control.t_min); - /* local Trange (53C ramp range) */ - adt7475_write_byte(TEMP_TRANGE_REG(1), case_fan_control.t_range); // Local TRange - adt7475_write_byte(TEMP_TRANGE_REG(2), case_fan_control.t_range); // PWM2 Freq - } else { - adt7475_write_byte(PWM_REG(2), case_fan_control.pwm_max); - } - - /* Config Register 3 - enable smbalert & therm */ - adt7475_write_byte(0x78, 0x03); - /* Config Register 4 - enable therm output */ - adt7475_write_byte(0x7d, 0x09); - /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */ - adt7475_write_byte(0x75, 0x2e); - - /* Config Register 1 Set Start bit */ - adt7475_write_byte(0x40, 0x05); - - /* Read status register to clear any old errors */ - byte2 = adt7475_read_byte(0x42); - byte = adt7475_read_byte(0x41); - - printk(BIOS_DEBUG, "Init 'Thermal Monitor' end , status 0x42 = 0x%02x, status 0x41 = 0x%02x\n", - byte2, byte); - -} - -static void patch_mmio_nonposted( void ) -{ - unsigned reg, index; - resource_t rbase, rend; - u32 base, limit; - struct resource *resource; - struct device *dev; - struct device *k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1)); - - printk(BIOS_DEBUG,"%s ...\n", __func__); - - dev = dev_find_slot(1, PCI_DEVFN(5,0)); - // the uma frame buffer - index = 0x10; - resource = probe_resource(dev, index); - if( resource ) { - // fixup resource nonposted in k8 mmio - /* Get the base address */ - rbase = (resource->base >> 8) & ~(0xff); - /* Get the limit (rounded up) */ - rend = (resource_end(resource) >> 8) & ~(0xff); - - printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend); - - for( reg = 0xb8; reg >= 0x80; reg -= 8 ) { - base = pci_read_config32(k8_f1,reg); - limit = pci_read_config32(k8_f1,reg+4); - printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit); - if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) { - limit |= (1 << 7); - printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit); - pci_write_config32(k8_f1, reg+4, limit); - break; - } - } - printk(BIOS_DEBUG, "\n"); - } -} - -struct { - unsigned int bus; - unsigned int devfn; -} slot[] = { - {0, PCI_DEVFN(0,0)}, - {0, PCI_DEVFN(18,0)}, - {0, PCI_DEVFN(19,0)},{0, PCI_DEVFN(19,1)},{0, PCI_DEVFN(19,2)},{0, PCI_DEVFN(19,3)},{0, PCI_DEVFN(19,4)},{0, PCI_DEVFN(19,5)}, - {0, PCI_DEVFN(20,0)},{0, PCI_DEVFN(20,1)},{0, PCI_DEVFN(20,2)},{0, PCI_DEVFN(20,3)},{0, PCI_DEVFN(20,5)},{0, PCI_DEVFN(20,6)}, - {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)}, - {255,0}, -}; - - -unsigned int plx_present = 0; - -static void update_subsystemid( struct device *dev ) -{ - int i; - - dev->subsystem_vendor = 0x110a; - if( plx_present ){ - dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077 - } else { - dev->subsystem_device = 0x4077; // U1P0 = 0x4077 - } - printk(BIOS_INFO, "%s [%x/%x]\n", dev_name(dev), dev->subsystem_vendor, dev->subsystem_device ); - for( i = 0; slot[i].bus < 255; i++) { - struct device *d; - d = dev_find_slot(slot[i].bus,slot[i].devfn); - if( d ) { - printk(BIOS_DEBUG,"%s subsystem <- %x/%x\n", dev_path(d), dev->subsystem_vendor, dev->subsystem_device); - d->subsystem_device = dev->subsystem_device; - } - } -} - -static void detect_hw_variant( struct device *dev ) -{ - - struct device *nb_dev = NULL, *dev2 = NULL; - struct southbridge_amd_rs690_config *cfg; - u32 lc_state, id = 0; - - printk(BIOS_INFO, "Scan for PLX device ...\n"); - nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (!nb_dev) { - die("CAN NOT FIND RS690 DEVICE, HALT!\n"); - /* NOT REACHED */ - } - - dev2 = dev_find_slot(0, PCI_DEVFN(2, 0)); - if (!dev2) { - die("CAN NOT FIND GFX DEVICE 2, HALT!\n"); - /* NOT REACHED */ - } - PcieReleasePortTraining(nb_dev, dev2, 2); // we assume PLX is connected to port 2 - - mdelay(40); - lc_state = nbpcie_p_read_index(dev2, 0xa5); /* lc_state */ - printk(BIOS_DEBUG, "lc current state=%x\n", lc_state); - /* LC_CURRENT_STATE = bit0-5 */ - switch( lc_state & 0x3f ){ - case 0x00: - case 0x01: - case 0x02: - case 0x03: - case 0x04: - printk(BIOS_NOTICE, "No device present, skipping PLX scan ..\n"); - break; - case 0x07: - case 0x10: - { - struct device dummy; - u32 pci_primary_bus, buses; - u16 secondary, subordinate; - - printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); - // save the existing primary/secondary/subordinate bus number configuration. - secondary = dev2->bus->secondary; - subordinate = dev2->bus->subordinate; - buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS); - - // Configure the bus numbers for this bridge - // bus number 1 is for internal gfx device, so we start with busnumber 2 - - buses &= 0xff000000; - buses |= ((2 << 8) | (0xff << 16)); - // setup the buses in device 2 - pci_write_config32(dev2,PCI_PRIMARY_BUS, buses); - - // fake a device descriptor for a device behind device 2 - dummy.bus = dev2->bus; - dummy.bus->secondary = (buses >> 8) & 0xff; - dummy.bus->subordinate = (buses >> 16) & 0xff; - dummy.path.type = DEVICE_PATH_PCI; - dummy.path.pci.devfn = PCI_DEVFN(0,0); // PLX: device number 0, function 0 - - id = pci_read_config32(&dummy, PCI_VENDOR_ID); - /* Have we found something? - * Some broken boards return 0 if a slot is empty, but - * the expected answer is 0xffffffff - */ - if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { - printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id); - } else { - printk(BIOS_DEBUG, "found device [%x]\n", id); - } - // restore changes made for device 2 - dev2->bus->secondary = secondary; - dev2->bus->subordinate = subordinate; - pci_write_config32(dev2, PCI_PRIMARY_BUS, pci_primary_bus); - } - break; - default: - break; - } - - plx_present = 0; - if( id == PLX_VIDDID ){ - printk(BIOS_INFO, "found PLX device\n"); - plx_present = 1; - cfg = (struct southbridge_amd_rs690_config *)dev2->chip_info; - if( cfg->gfx_tmds ) { - printk(BIOS_INFO, "Disable 'gfx_tmds' support\n"); - cfg->gfx_tmds = 0; - cfg->gfx_link_width = 4; - } - return; - } -} - -void smm_lock(void) -{ - /* LOCK the SMM memory window and enable normal SMM. - * After running this function, only a full reset can - * make the SMM registers writable again. - */ - printk(BIOS_DEBUG, "Locking SMM.\n"); - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x69, - D_LCK | G_SMRAME | A_BASE_SEG); -} - - /** - * @brief Init - * - * @param dev - the root device - */ - -static void mainboard_init(struct device *dev) -{ -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) - INT15_function_extensions int15_func; -#endif - - printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", - dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); - -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) - if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS) - int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; - int15_func.regs.func05_TV_standard = TV_MODE_NO; - install_INT15_function_extensions(&int15_func); -#endif - set_thermal_config(); - pm_init(); - cable_detect(); - patch_mmio_nonposted(); - smm_lock(); -} - -/************************************************* -* enable the dedicated function in sina board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - - printk(BIOS_INFO, "%s %s[%x/%x] %s\n", - dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) - /* Install custom int15 handler for VGA OPROM */ - mainboard_interrupt_handlers(0x15, &int15_handler); -#endif - - detect_hw_variant(dev); - update_subsystemid(dev); - - dev->ops->init = mainboard_init; // rest of mainboard init later - dev->ops->acpi_inject_dsdt_generator = mainboard_inject_dsdt; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.h b/src/mainboard/siemens/sitemp_g1p1/mainboard.h deleted file mode 100644 index 33d0a5e68e..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.h +++ /dev/null @@ -1 +0,0 @@ -void mainboard_inject_dsdt(device_t device); diff --git a/src/mainboard/siemens/sitemp_g1p1/mptable.c b/src/mainboard/siemens/sitemp_g1p1/mptable.c deleted file mode 100644 index 3515d304fb..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/mptable.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> - -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - mptable_init(mc, LOCAL_APIC_ADDR); - smp_write_processors(mc); - - get_bus_conf(); - printk(BIOS_DEBUG, "%s: apic_id=0x%x\n", __func__, apicid_sb600); - - mptable_write_buses(mc, NULL, &isa_bus); - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - struct resource *res; - res = find_resource(dev, 0x74); - smp_write_ioapic(mc, apicid_sb600, 0x20, - res2mmio(res, 0, 0)); - } - } - mptable_add_isa_interrupts(mc, isa_bus, apicid_sb600, 0); - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) - - /* usb */ - PCI_INT(0x0, 0x13, 0x0, 0x10); - PCI_INT(0x0, 0x13, 0x1, 0x11); - PCI_INT(0x0, 0x13, 0x2, 0x12); - PCI_INT(0x0, 0x13, 0x3, 0x13); - - /* sata */ - PCI_INT(0x0, 0x12, 0x1, 0x16); - - /* SMBus/ACPI */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* IDE */ - PCI_INT(0x0, 0x14, 0x1, 0x11); - /* HDA */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - /* LPC */ - PCI_INT(0x0, 0x14, 0x3, 0x13); - - /* GFX ? */ - PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12); - PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13); - - /* PCIe slots */ - PCI_INT(0x2, 0x00, 0x00, 0x10); - PCI_INT(0x2, 0x00, 0x01, 0x11); - PCI_INT(0x2, 0x00, 0x02, 0x12); - PCI_INT(0x2, 0x00, 0x03, 0x13); - - /* PCIe slots */ - PCI_INT(0x3, 0x00, 0x00, 0x11); - PCI_INT(0x3, 0x00, 0x01, 0x12); - PCI_INT(0x3, 0x00, 0x02, 0x13); - PCI_INT(0x3, 0x00, 0x03, 0x10); - - /* PCIe slots */ - PCI_INT(0x4, 0x00, 0x00, 0x12); - PCI_INT(0x4, 0x00, 0x01, 0x13); - PCI_INT(0x4, 0x00, 0x02, 0x10); - PCI_INT(0x4, 0x00, 0x03, 0x11); - - /* PCIe slots */ - PCI_INT(0x5, 0x00, 0x00, 0x13); - PCI_INT(0x5, 0x00, 0x01, 0x10); - PCI_INT(0x5, 0x00, 0x02, 0x11); - PCI_INT(0x5, 0x00, 0x03, 0x12); - - /* onboard NIC ? */ - PCI_INT(bus_sb600[1], 0x7, 0x0, 0x13); - PCI_INT(bus_sb600[1], 0x7, 0x1, 0x10); - PCI_INT(bus_sb600[1], 0x7, 0x2, 0x11); - PCI_INT(bus_sb600[1], 0x7, 0x3, 0x12); - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, isa_bus); - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/resourcemap.c b/src/mainboard/siemens/sitemp_g1p1/resourcemap.c deleted file mode 100644 index 84e107b8b3..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_sitemp_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c deleted file mode 100644 index 5f910ea4b2..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> - -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> - -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, CONFIG_UART_FOR_CONSOLE == 1 ? IT8712F_SP2 : IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/ -void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - -/* called in raminit_f.c */ -void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -/*called in raminit_f.c */ -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define __WARNING__(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) -#define __DEBUG__(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) -#define __INFO__(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge - sb600_lpc_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif - post_code(0x03); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid); - - setup_sitemp_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - post_code(0x04); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if( (cpuid1.edx & 0x6) == 0x6 ) { - - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - __DEBUG__("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - __DEBUG__("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - } else { - __DEBUG__("Changing FIDVID not supported\n"); - } - - post_code(0x05); - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - __DEBUG__("needs_reset=0x%x\n", needs_reset); - - post_code(0x06); - - if (needs_reset) { - __INFO__("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x07); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_code(0x08); - - rs690_before_pci_init(); // does nothing - sb600_before_pci_init(); -} diff --git a/src/mainboard/sunw/Kconfig b/src/mainboard/sunw/Kconfig deleted file mode 100644 index ea76e23c7b..0000000000 --- a/src/mainboard/sunw/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_SUNW - -choice - prompt "Mainboard model" - -source "src/mainboard/sunw/*/Kconfig.name" - -endchoice - -source "src/mainboard/sunw/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Sun" - -endif # VENDOR_SUNW diff --git a/src/mainboard/sunw/Kconfig.name b/src/mainboard/sunw/Kconfig.name deleted file mode 100644 index c3783a3cc0..0000000000 --- a/src/mainboard/sunw/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_SUNW - bool "Sun Microsystems" diff --git a/src/mainboard/sunw/ultra40/Kconfig b/src/mainboard/sunw/ultra40/Kconfig deleted file mode 100644 index a29cf16ea5..0000000000 --- a/src/mainboard/sunw/ultra40/Kconfig +++ /dev/null @@ -1,64 +0,0 @@ -if BOARD_SUNW_ULTRA40 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_SMSC_LPC47B397 - select SUPERIO_SMSC_LPC47M10X - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_1024 - select CK804_USE_NIC - select CK804_USE_ACI - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default sunw/ultra40 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config CK804_NUM - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "Ultra 40" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUNW_ULTRA40 diff --git a/src/mainboard/sunw/ultra40/Kconfig.name b/src/mainboard/sunw/ultra40/Kconfig.name deleted file mode 100644 index 7a4f562f30..0000000000 --- a/src/mainboard/sunw/ultra40/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SUNW_ULTRA40 - bool "Ultra 40" diff --git a/src/mainboard/sunw/ultra40/board_info.txt b/src/mainboard/sunw/ultra40/board_info.txt deleted file mode 100644 index 76b41dceee..0000000000 --- a/src/mainboard/sunw/ultra40/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Board URL: http://docs.oracle.com/cd/E19127-01/ultra40.ws/820-0123-13/intro.html diff --git a/src/mainboard/sunw/ultra40/cmos.layout b/src/mainboard/sunw/ultra40/cmos.layout deleted file mode 100644 index c4c90f697f..0000000000 --- a/src/mainboard/sunw/ultra40/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/sunw/ultra40/devicetree.cb b/src/mainboard/sunw/ultra40/devicetree.cb deleted file mode 100644 index 9f9bb67556..0000000000 --- a/src/mainboard/sunw/ultra40/devicetree.cb +++ /dev/null @@ -1,151 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x108e 0x0040 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/smsc/lpc47m10x # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 off # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master CK804 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave CK804 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 19.0 on end # Link 0 - device pci 19.0 on # Link 1 == LDT 1 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 off end # SM - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 off end # IDE - device pci 7.0 off end # SATA 1 - device pci 8.0 off end # SATA 0 - device pci 9.0 off end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - end -end diff --git a/src/mainboard/sunw/ultra40/get_bus_conf.c b/src/mainboard/sunw/ultra40/get_bus_conf.c deleted file mode 100644 index e7096f31bf..0000000000 --- a/src/mainboard/sunw/ultra40/get_bus_conf.c +++ /dev/null @@ -1,276 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> -#include <stdlib.h> -#include <cpu/amd/amdk8_sysconf.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_ck804_0; //1 -unsigned char bus_ck804_1; //2 -unsigned char bus_ck804_2; //3 -unsigned char bus_ck804_3; //4 -unsigned char bus_ck804_4; //5 -unsigned char bus_ck804_5; //6 -unsigned char bus_8131_0; //7 -unsigned char bus_8131_1; //8 -unsigned char bus_8131_2; //9 -unsigned char bus_ck804b_0; //a -unsigned char bus_ck804b_1; //b -unsigned char bus_ck804b_2; //c -unsigned char bus_ck804b_3; //d -unsigned char bus_ck804b_4; //e -unsigned char bus_ck804b_5; //f -unsigned apicid_ck804; -unsigned apicid_8131_1; -unsigned apicid_8131_2; -unsigned apicid_ck804b; - -unsigned sblk; -unsigned pci1234[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdn3; -unsigned sbdnb; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - hc_possible_num = ARRAY_SIZE(pci1234); - - get_sblk_pci1234(); - - sbdn = (hcdn[0] & 0xff); // first byte of first chain - - sbdn3 = (hcdn[1] & 0xff); - - sbdnb = (hcdn[2] & 0xff); // first byte of second chain - -// bus_ck804_0 = node_link_to_bus(0, sblk); - bus_ck804_0 = (pci1234[0] >> 16) & 0xff; - - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; -#endif - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_5 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b, 0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0b); - - bus_ck804_3 = bus_ck804_2 + 1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c, 0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0c); - - bus_ck804_4 = bus_ck804_3 + 1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0d); - - bus_ck804_5 = bus_ck804_4 + 1; - } -#endif - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0e); - } - - bus_8131_0 = (pci1234[1] >> 16) & 0xff; - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:01.0, using defaults\n", - bus_8131_0); - - bus_8131_1 = bus_8131_0 + 1; - bus_8131_2 = bus_8131_0 + 2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:02.0, using defaults\n", - bus_8131_0); - - bus_8131_2 = bus_8131_1 + 1; - } - - /* CK804b */ - - if (pci1234[2] & 0xf) { //if the second CPU is installed - bus_ck804b_0 = (pci1234[2] >> 16) & 0xff; -#if 0 - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09, 0)); - if (dev) { - bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_2 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_2++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x09); - - bus_ck804b_1 = bus_ck804b_0 + 1; - bus_ck804b_2 = bus_ck804b_0 + 2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b, 0)); - if (dev) { - bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_3 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_3++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0b); - - bus_ck804b_2 = bus_ck804b_0 + 1; - bus_ck804b_3 = bus_ck804b_0 + 2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c, 0)); - if (dev) { - bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_4 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_4++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0c); - - bus_ck804b_4 = bus_ck804b_3 + 1; - } - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d, 0)); - if (dev) { - bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_5 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_5++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0d); - - bus_ck804b_5 = bus_ck804b_4 + 1; - } -#endif - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e, 0)); - if (dev) { - bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0e); -#if 1 - bus_ck804b_5 = bus_ck804b_4 + 1; -#endif - - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(4); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_ck804 = apicid_base + 0; - apicid_8131_1 = apicid_base + 1; - apicid_8131_2 = apicid_base + 2; - apicid_ck804b = apicid_base + 3; - -} diff --git a/src/mainboard/sunw/ultra40/irq_tables.c b/src/mainboard/sunw/ultra40/irq_tables.c deleted file mode 100644 index f895291b4c..0000000000 --- a/src/mainboard/sunw/ultra40/irq_tables.c +++ /dev/null @@ -1,212 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_ck804_0; //1 -extern unsigned char bus_ck804_1; //2 -extern unsigned char bus_ck804_2; //3 -extern unsigned char bus_ck804_3; //4 -extern unsigned char bus_ck804_4; //5 -extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0; //7 -extern unsigned char bus_8131_1; //8 -extern unsigned char bus_8131_2; //9 -extern unsigned char bus_ck804b_0; //a -extern unsigned char bus_ck804b_1; //b -extern unsigned char bus_ck804b_2; //c -extern unsigned char bus_ck804b_3; //d -extern unsigned char bus_ck804b_4; //e -extern unsigned char bus_ck804b_5; //f - -extern unsigned pci1234[]; - -extern unsigned sbdn; -extern unsigned hcdn[]; -extern unsigned sbdn3; -extern unsigned sbdnb; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_ck804_0; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 9) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; -//pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (sbdn3 << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - if (pci1234[2] & 0xf) { - //second pci beidge - write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb + 9) << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, - 0xdef8, 0x0, 0); - pirq_info++; - slot_num++; - } -#if 0 -//smbus - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 1) << 3) | 0, 0x2, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//usb - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 2) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//audio - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 4) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 7) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 8) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 0xa) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//Slot1 PCIE x16 - write_pirq_info(pirq_info, bus_ck804_5, (0 << 3) | 0, 0x3, 0xdef8, 0x4, - 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); - pirq_info++; - slot_num++; - -//firewire - write_pirq_info(pirq_info, bus_ck804_1, (0x5 << 3) | 0, 0x3, 0xdef8, 0, - 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//Slot2 pci - write_pirq_info(pirq_info, bus_ck804_1, (0x4 << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); - pirq_info++; - slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb + 0xa) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//Slot3 PCIE x16 - write_pirq_info(pirq_info, bus_ck804b_5, (0 << 3) | 0, 0x3, 0xdef8, 0x4, - 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); - pirq_info++; - slot_num++; - -//Slot4 PCIX - write_pirq_info(pirq_info, bus_8131_2, (4 << 3) | 0, 0x1, 0xdef8, 0x2, - 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); - pirq_info++; - slot_num++; - -//Slot5 PCIX - write_pirq_info(pirq_info, bus_8131_2, (9 << 3) | 0, 0x2, 0xdef8, 0x3, - 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); - pirq_info++; - slot_num++; - -//onboard scsi - write_pirq_info(pirq_info, bus_8131_2, (6 << 3) | 0, 0x2, 0xdef8, 0x3, - 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//Slot6 PCIX - write_pirq_info(pirq_info, bus_8131_1, (4 << 3) | 0, 0x1, 0xdef8, 0x2, - 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); - pirq_info++; - slot_num++; -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/sunw/ultra40/mptable.c b/src/mainboard/sunw/ultra40/mptable.c deleted file mode 100644 index b66b91d012..0000000000 --- a/src/mainboard/sunw/ultra40/mptable.c +++ /dev/null @@ -1,201 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804_0; //1 -extern unsigned char bus_ck804_1; //2 -extern unsigned char bus_ck804_2; //3 -extern unsigned char bus_ck804_3; //4 -extern unsigned char bus_ck804_4; //5 -extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0; //7 -extern unsigned char bus_8131_1; //8 -extern unsigned char bus_8131_2; //9 -extern unsigned char bus_ck804b_0;//a -extern unsigned char bus_ck804b_1;//b -extern unsigned char bus_ck804b_2;//c -extern unsigned char bus_ck804b_3;//d -extern unsigned char bus_ck804b_4;//e -extern unsigned char bus_ck804b_5;//f -extern unsigned apicid_ck804; -extern unsigned apicid_8131_1; -extern unsigned apicid_8131_2; -extern unsigned apicid_ck804b; - -extern unsigned pci1234[]; - -extern unsigned sbdn; -extern unsigned hcdn[]; -extern unsigned sbdn3; -extern unsigned sbdnb; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int i, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, - res2mmio(res, 0, 0)); - } - - /* Initialize interrupt mapping*/ - - dword = 0x0120d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00080d7d; - pci_write_config32(dev, 0x84, dword); - - } - - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_1, 0x11, - res2mmio(res, 0, 0)); - } - } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_2, 0x11, - res2mmio(res, 0, 0)); - } - } - - if(pci1234[2] & 0xf) { - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804b, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x0000d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x00000000; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00000d00; - pci_write_config32(dev, 0x84, dword); - - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 1); - -// Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); -// 10 - -// Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 - -// Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 - -// Onboard ck804 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 - -// Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 - -// Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 - -// Onboard ck804 NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 - -//Slot 1 PCIE x16 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00 << 2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); - } - -//Onboard Firewire - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05 << 2)|0, apicid_ck804, 0x13); // 19 - -//Slot 2 PCI 32 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04 << 2)|i, apicid_ck804, 0x10 + (0+i)%4); - } - - if(pci1234[2] & 0xf) { -//Onboard ck804b NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21 = 53 - -//Slot 3 PCIE x16 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00 << 2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); - } - } - -//Channel B of 8131 - -//Slot 4 PCI-X 100/66 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4 << 2)|i, apicid_8131_2, (0+i)%4); - } - -//Slot 5 PCIX 100/66 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9 << 2)|i, apicid_8131_2, (1+i)%4); // 29 - } - -//OnBoard LSI SCSI - for(i = 0; i < 2; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6 << 2)|i, apicid_8131_2, (2+i)%4); //30 - } - -//Channel A of 8131 - -//Slot 6 PCIX 133/100/66 - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4 << 2)|i, apicid_8131_1, (0+i)%4); //24 - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/sunw/ultra40/resourcemap.c b/src/mainboard/sunw/ultra40/resourcemap.c deleted file mode 100644 index 964be503bb..0000000000 --- a/src/mainboard/sunw/ultra40/resourcemap.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * needs a different resource map - * - */ - -static void setup_ultra40_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000, 0x7f000103, - PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000, 0xff800113, - PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xec), 0x0000, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/sunw/ultra40/romstage.c b/src/mainboard/sunw/ultra40/romstage.c deleted file mode 100644 index 9325a19b34..0000000000 --- a/src/mainboard/sunw/ultra40/romstage.c +++ /dev/null @@ -1,150 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include <southbridge/nvidia/ck804/early_smbus.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> - -#include <superio/smsc/lpc47b397/lpc47b397.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "superio/smsc/lpc47b397/early_gpio.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) -#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) -#define SUPERIO_GPIO_IO_BASE 0x400 - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -#ifdef ENABLE_ONBOARD_SCSI -static void sio_gpio_setup(void) -{ - unsigned value; - - /*Enable onboard scsi*/ - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1 << 7)|(0 << 2)|(0 << 1)|(0 << 0)); // GP21, offset 0x2c, DISABLE_SCSI_L - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1 << 1))); -} -#endif - -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/ck804/early_setup_ss.h> - -//set GPIO to input mode -#define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ - -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - unsigned value; - uint32_t dword; - uint8_t byte; - - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 29)|(1 << 0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - - lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); - value &= 0xbf; - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ultra40_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(nodes, ctrl); -} diff --git a/src/mainboard/sunw/ultra40m2/Kconfig b/src/mainboard/sunw/ultra40m2/Kconfig deleted file mode 100644 index 2913ae8c30..0000000000 --- a/src/mainboard/sunw/ultra40m2/Kconfig +++ /dev/null @@ -1,79 +0,0 @@ -if BOARD_SUNW_ULTRA40M2 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_SMSC_DME1737 - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default sunw/ultra40m2 - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MCP55_NUM - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "Ultra 40 M2" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 1 - -config MCP55_PCI_E_X_1 - int - default 1 - -endif # BOARD_SUNW_ULTRA40M2 diff --git a/src/mainboard/sunw/ultra40m2/Kconfig.name b/src/mainboard/sunw/ultra40m2/Kconfig.name deleted file mode 100644 index f6bc5517c6..0000000000 --- a/src/mainboard/sunw/ultra40m2/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SUNW_ULTRA40M2 - bool "Ultra 40 M2" diff --git a/src/mainboard/sunw/ultra40m2/board_info.txt b/src/mainboard/sunw/ultra40m2/board_info.txt deleted file mode 100644 index b68555c038..0000000000 --- a/src/mainboard/sunw/ultra40m2/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board URL: http://docs.oracle.com/cd/E19127-01/ultra40.ws/820-0123-13/intro.html -Board name: Ultra 40 M2 -Category: desktop -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y diff --git a/src/mainboard/sunw/ultra40m2/cmos.layout b/src/mainboard/sunw/ultra40m2/cmos.layout deleted file mode 100644 index d774c2f662..0000000000 --- a/src/mainboard/sunw/ultra40m2/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -408 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/sunw/ultra40m2/devicetree.cb b/src/mainboard/sunw/ultra40m2/devicetree.cb deleted file mode 100644 index 998245950c..0000000000 --- a/src/mainboard/sunw/ultra40m2/devicetree.cb +++ /dev/null @@ -1,147 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x108e 0x6676 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end # Link 0 == LDT 0 - device pci 18.0 on # Link 1 == LDT 1 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/smsc/dme1737 # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 2 - end - device pnp 2e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # PS/2 (connectors not populated) - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.a on # Runtime Registers - io 0x60 = 0x600 - end - end - # There's an Infineon SLB9635TT12 TPM on this LPC bus. - # There's also an Akom AK2001 7-segment port 0x80 decoder on - # this LPC bus. - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - #chip drivers/generic/generic # PCA9556 GPIO on HDD backplanes (address conflict!) - # device i2c 18 on end - #end - chip drivers/generic/generic # EMC6D103 HWM (for CPUs) - device i2c 2d on end - end - chip drivers/generic/generic # DME1737 HWM - device i2c 2e on end - end - #chip drivers/generic/generic # HDD 4-7 backplane FRU 24C64 EEPROM - # device i2c 51 on end - #end - #chip drivers/generic/generic # front panel module FRU 24C64 EEPROM - # device i2c 52 on end - #end - #chip drivers/generic/generic # HDD 0-3 backplane FRU 24C64 EEPROM - # device i2c 53 on end - #end - # there are more SMbus devices on this bus - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 off end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA - device pci 8.0 off end # NIC - device pci 9.0 off end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on # Link 2 == LDT 2 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 on end # SM 0 - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 off end # SATA 2 - device pci 6.0 off end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/sunw/ultra40m2/get_bus_conf.c b/src/mainboard/sunw/ultra40m2/get_bus_conf.c deleted file mode 100644 index 2a10eeb7a8..0000000000 --- a/src/mainboard/sunw/ultra40m2/get_bus_conf.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - - - - -static unsigned get_bus_conf_done = 0; - -static unsigned get_hcid(unsigned i) -{ - unsigned id = 0; - - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - - unsigned devn = sysconf.hcdn[i] & 0xff; - - struct device *dev; - - dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); - - switch (dev->device) { - case 0x0369: //IO55 - id = 4; - break; - } - - // we may need more way to find out hcid: subsystem id? GPIO read ? - - // we need use id for 1. bus num, 2. mptable, 3. ACPI table - - return id; -} - -void get_bus_conf(void) -{ - unsigned apicid_base; - struct mb_sysconf_t *m; - - int i; - - if (get_bus_conf_done) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - - m->sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - m->bus_mcp55 = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55b */ - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x0f)) - continue; - // check hcid type here - sysconf.hcid[i] = get_hcid(i); - if (!sysconf.hcid[i]) - continue; //unknown co processor - - m->bus_mcp55b = (sysconf.pci1234[1]>>16) & 0xff; - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(2); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_mcp55 = apicid_base+0; - m->apicid_mcp55b = apicid_base+1; -} diff --git a/src/mainboard/sunw/ultra40m2/hda_verb.c b/src/mainboard/sunw/ultra40m2/hda_verb.c deleted file mode 100644 index 137196c6e2..0000000000 --- a/src/mainboard/sunw/ultra40m2/hda_verb.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Tyan Computer - * Copyright (C) 2006-2007 AMD - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0885, // Codec Vendor / Device ID: Realtek ALC889A - 0x00000000, // Subsystem ID - 0x0000000d, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x108ee601 */ - AZALIA_SUBVENDOR(0x0, 0x108ee601), - - /* NID 0x14, FRONT-OUT-L/R */ - AZALIA_PIN_CFG(0x0, 0x14, 0x01014010), - - /* NID 0x15, SURR-OUT-L/R */ - AZALIA_PIN_CFG(0x0, 0x15, 0x01011012), - - /* NID 0x16, CEN/LFE-OUT */ - AZALIA_PIN_CFG(0x0, 0x16, 0x01016011), - - /* NID 0x17, SIDE-SURR-L/R */ - AZALIA_PIN_CFG(0x0, 0x17, 0x01012014), - - /* NID 0x18, MIC1-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x18, 0x01a19840), - - /* NID 0x19, MIC2-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x19, 0x02a19850), - - /* NID 0x1a, LINE1-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x1a, 0x01813041), - - /* NID 0x1b, LINE2-L/R, VREFO */ - AZALIA_PIN_CFG(0x0, 0x1b, 0x02214020), - - /* NID 0x1c, CD-L/R / GND */ - AZALIA_PIN_CFG(0x0, 0x1c, 0x9933014f), - - /* NID 0x1d, PCBEEP */ - AZALIA_PIN_CFG(0x0, 0x1d, 0x99830142), - - /* NID 0x1e, S/PDIF-OUT */ - AZALIA_PIN_CFG(0x0, 0x1e, 0x014b4130), - - /* NID 0x1f, S/PDIF-IN */ - AZALIA_PIN_CFG(0x0, 0x1f, 0x01cb9160), -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/sunw/ultra40m2/irq_tables.c b/src/mainboard/sunw/ultra40m2/irq_tables.c deleted file mode 100644 index 061d276b78..0000000000 --- a/src/mainboard/sunw/ultra40m2/irq_tables.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55, ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/sunw/ultra40m2/mainboard.c b/src/mainboard/sunw/ultra40m2/mainboard.c deleted file mode 100644 index 750ae6c6ba..0000000000 --- a/src/mainboard/sunw/ultra40m2/mainboard.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pnp_def.h> -#include <device/smbus.h> -#include <stdlib.h> -#include <superio/smsc/dme1737/dme1737.h> - -static void emc6d103_init(void) -{ - size_t i; - int reg; - - static const struct { uint8_t idx; uint8_t msk; uint8_t set; } script[] = { - { 0x7f, 0x7f, 0x80 }, // INIT - { 0x4f, 0x00, 0x64 }, // Diode 1 High 100°C - { 0x53, 0x00, 0x64 }, // Diode 2 High 100°C (Sun firmware didn't set this) - { 0x54, 0x00, 0x30 }, // Tach1 Minimum LSB - { 0x55, 0x00, 0x2a }, // Tach1 Minimum MSB - { 0x56, 0x00, 0x30 }, // Tach2 Minimum LSB - { 0x57, 0x00, 0x2a }, // Tach2 Minimum MSB - { 0x5c, 0x00, 0x02 }, // PWM 1 Config - { 0x5d, 0x00, 0x42 }, // PWM 2 Config - { 0x5f, 0x00, 0x8a }, // Zone 1 range, Fan 1 freq - { 0x60, 0x00, 0xca }, // Zone 2 range, Fan 2 freq - { 0x61, 0x00, 0x8a }, // Zone 3 range, Fan 3 freq - { 0x62, 0x00, 0x67 }, // Min/Off, PWM 1 ramp rate - { 0x63, 0x00, 0x70 }, // PWM 2, PWM 3 ramp rate - { 0x64, 0x00, 0x59 }, // PWM1 Minimum Duty Cycle - { 0x65, 0x00, 0x59 }, // PWM2 Minimum Duty Cycle - { 0x67, 0x00, 0x47 }, // Zone 1 Low Temp Limit - { 0x69, 0x00, 0x47 }, // Zone 3 Low Temp Limit - { 0x80, 0x00, 0x07 }, // Interrupt Enable 2 - { 0x40, 0xfe, 0x01 }, // START - }; - - struct device * const dev = dev_find_slot_on_smbus(2, 0x2d); - if (dev == NULL) { - printk(BIOS_WARNING, "EMC6D103 not found\n"); - return; - } - - printk(BIOS_SPEW, "%s EMC6D103 id: %x %x\n", __func__, smbus_read_byte(dev, 0x3e), smbus_read_byte(dev, 0x3f)); - - for (i = 0; i < ARRAY_SIZE(script); i++) { - reg = smbus_read_byte(dev, script[i].idx); - if (reg < 0) - goto fail; - reg &= script[i].msk; - reg |= script[i].set; - reg = smbus_write_byte(dev, script[i].idx, reg & 0xff); - if (reg < 0) - goto fail; - } - - return; - -fail: - printk(BIOS_WARNING, "failed to initialize EMC6D103\n"); -} - -/* set up DME1737 runtime registers for FAN/PWM 5/6 */ -static void dme1737_runtime_init(void) -{ - size_t i; - uint8_t reg; - - static const struct { uint8_t idx; uint8_t msk; uint8_t set; } rttab[] = { - { 0x43, 0xf3, 0x08 }, - { 0x44, 0xf0, 0x08 }, - { 0x45, 0xf3, 0x08 }, - { 0x46, 0xf0, 0x08 }, - }; - - /* find DME1737 runtime device (LDN 10) */ - struct device * const dev = dev_find_slot_pnp(0x2e, DME1737_RT); - if (dev == NULL) - return; - - struct resource * const res = find_resource(dev, PNP_IDX_IO0); - if (res == NULL) - return; - - for (i = 0; i < ARRAY_SIZE(rttab); i++) { - reg = inb(res->base + rttab[i].idx); - reg &= rttab[i].msk; - reg |= rttab[i].set; - outb(reg, res->base + rttab[i].idx); - } -} - -static void dme1737_hwm_init(void) -{ - size_t i; - int reg; - - static const struct { uint8_t idx; uint8_t msk; uint8_t set; } script[] = { - //{ 0x7f, 0x7f, 0x80 }, // INIT - { 0x4f, 0x00, 0x32 }, // High - { 0x54, 0x00, 0x30 }, // Tach0 Minimum LSB - { 0x55, 0x00, 0x2a }, // Tach0 Minimum MSB - { 0x56, 0x00, 0x30 }, // Tach1 Minimum LSB - { 0x57, 0x00, 0x2a }, // Tach1 Minimum MSB - { 0x5a, 0x00, 0x30 }, // Tach3 Minimum LSB - { 0x5b, 0x00, 0x2a }, // Tach3 Minimum MSB - { 0x5d, 0x00, 0x07 }, // PWM 1 Config: Zone 0 - { 0x5f, 0x0f, 0x50 }, // Zone 0 range, PWM freq - { 0x62, 0x00, 0x67 }, // Ramp Rate - { 0x63, 0x00, 0x80 }, // Ramp Rate - { 0x65, 0x00, 0x0d }, // PWM 1 Minimum - { 0x67, 0x00, 0x23 }, // Zone 0 Low - { 0x6a, 0x00, 0x32 }, // Zone 0 High - { 0x6c, 0x00, 0x5a }, // Zone 2 Abs - { 0x80, 0x00, 0x17 }, // Interrupt Enable 2? - { 0xa5, 0x00, 0x40 }, // PMW 4: 25% duty - { 0xa6, 0x00, 0x40 }, // PWM 5: 25% duty - { 0x40, 0xfe, 0x01 }, // START - }; - - struct device * const dev = dev_find_slot_on_smbus(2, 0x2e); - if (dev == NULL) { - printk(BIOS_INFO, "SMBus DME1737 not found\n"); - return; - } - - printk(BIOS_SPEW, "%s DME1737 id: %x %x\n", __func__, smbus_read_byte(dev, 0x3e), smbus_read_byte(dev, 0x3f)); - - for (i = 0; i < ARRAY_SIZE(script); i++) { - reg = smbus_read_byte(dev, script[i].idx); - if (reg < 0) - goto fail; - reg &= script[i].msk; - reg |= script[i].set; - reg = smbus_write_byte(dev, script[i].idx, reg & 0xff); - if (reg < 0) - goto fail; - } - - return; - -fail: - printk(BIOS_WARNING, "failed to initialize EMC6D103\n"); -} - -static void mainboard_init(struct device *dev) -{ - emc6d103_init(); - dme1737_runtime_init(); - dme1737_hwm_init(); - - printk(BIOS_DEBUG, "%s done\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = mainboard_init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/sunw/ultra40m2/mb_sysconf.h b/src/mainboard/sunw/ultra40m2/mb_sysconf.h deleted file mode 100644 index 64837f6174..0000000000 --- a/src/mainboard/sunw/ultra40m2/mb_sysconf.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55; - unsigned char bus_mcp55b; - unsigned apicid_mcp55; - unsigned apicid_mcp55b; - unsigned sbdnb; -}; - -#endif diff --git a/src/mainboard/sunw/ultra40m2/mptable.c b/src/mainboard/sunw/ultra40m2/mptable.c deleted file mode 100644 index 56266a5c2b..0000000000 --- a/src/mainboard/sunw/ultra40m2/mptable.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - int i, j, bus_isa; - unsigned char apicpin[4]; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - - /* Initialize interrupt mapping*/ - dword = pci_read_config32(dev, 0x74); - dword &= ~(1 << 15); - dword |= 1 << 2; - pci_write_config32(dev, 0x74, dword); - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - if (m->bus_mcp55b) { - dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, m->apicid_mcp55b, 0x11, - res2mmio(res, 0, 0)); - - dword = 0x43c60000; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81000000; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00002d0; - pci_write_config32(dev, 0x84, dword); - - } - - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - -//Slot PCIE - for (j = 2; j < 8; j++) { - struct device *dev; - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 0x0a + j - 2 , 0)); - if (!dev || !dev->enabled) - continue; - for (i = 0; i < 4; i++) - apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4; - smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); - } - -//Slot PCI 32 - { - struct device *dev; - dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0)); - if (dev && dev->enabled) { - for (i = 0; i < 4; i++) - apicpin[i] = 0x10 + i%4; - smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); - } - } - - if (m->bus_mcp55b) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|0, m->apicid_mcp55b, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|1, m->apicid_mcp55b, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|2, m->apicid_mcp55b, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+8)<<2)|0, m->apicid_mcp55b, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+9)<<2)|0, m->apicid_mcp55b, 0x15); // 21 - - - //Slot PCIE - for (j = 2; j < 8; j++) { - struct device *dev; - dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x0a + j - 2 , 0)); - if (!dev || !dev->enabled) - continue; - for (i = 0; i < 4; i++) { - apicpin[i] = 0x10 + (2+j+i+4-m->sbdnb%4)%4; - } - smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55b, apicpin); - } - - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/sunw/ultra40m2/resourcemap.c b/src/mainboard/sunw/ultra40m2/resourcemap.c deleted file mode 100644 index 30ce9ea661..0000000000 --- a/src/mainboard/sunw/ultra40m2/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007010, -// PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, -// PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000103, /* link 1 of CPU 0 --> Nvidia MCP55 Pro */ -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of CPU 0 --> nvidia io55 */ - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/sunw/ultra40m2/romstage.c b/src/mainboard/sunw/ultra40m2/romstage.c deleted file mode 100644 index d3d579df6a..0000000000 --- a/src/mainboard/sunw/ultra40m2/romstage.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/smsc/dme1737/dme1737.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, DME1737_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define NMI_SC 0x0061 -#define PCI_SERR_EN 0x04 - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+61, 0x00, 0x05,/* GPIO62: enable/not-disable on-board TSB43AB22A Firewire */ - -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - setup_mb_resource_map(); - - dme1737_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - /* mask NMI from constantly-asserted-on-this-board SERR# */ - outb((inb(NMI_SC) & 0x0f) | PCI_SERR_EN, NMI_SC); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/supermicro/h8dme/Kconfig b/src/mainboard/supermicro/h8dme/Kconfig deleted file mode 100644 index 35f9bf0aaf..0000000000 --- a/src/mainboard/supermicro/h8dme/Kconfig +++ /dev/null @@ -1,68 +0,0 @@ -if BOARD_SUPERMICRO_H8DME - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - select DRIVERS_I2C_I2CMUX2 - -config MAINBOARD_DIR - string - default supermicro/h8dme - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "H8DME-2" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUPERMICRO_H8DME diff --git a/src/mainboard/supermicro/h8dme/Kconfig.name b/src/mainboard/supermicro/h8dme/Kconfig.name deleted file mode 100644 index 867b967591..0000000000 --- a/src/mainboard/supermicro/h8dme/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SUPERMICRO_H8DME - bool "H8DME-2" diff --git a/src/mainboard/supermicro/h8dme/board_info.txt b/src/mainboard/supermicro/h8dme/board_info.txt deleted file mode 100644 index bd2a32b61d..0000000000 --- a/src/mainboard/supermicro/h8dme/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DME-2.cfm diff --git a/src/mainboard/supermicro/h8dme/cmos.layout b/src/mainboard/supermicro/h8dme/cmos.layout deleted file mode 100644 index 9e6a9e56f2..0000000000 --- a/src/mainboard/supermicro/h8dme/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dme/devicetree.cb b/src/mainboard/supermicro/h8dme/devicetree.cb deleted file mode 100644 index 754e3163ea..0000000000 --- a/src/mainboard/supermicro/h8dme/devicetree.cb +++ /dev/null @@ -1,126 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 - device i2c 48 off end - device i2c 49 off end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/supermicro/h8dme/get_bus_conf.c b/src/mainboard/supermicro/h8dme/get_bus_conf.c deleted file mode 100644 index 8b8b2f9ea0..0000000000 --- a/src/mainboard/supermicro/h8dme/get_bus_conf.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_mcp55[8]; //1 -unsigned apicid_mcp55; - -unsigned char bus_pcix[3]; // under bus_mcp55_2 - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdnb; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - for (i = 0; i < 8; i++) { - bus_mcp55[i] = 0; - } - - for (i = 0; i < 3; i++) { - bus_pcix[i] = 0; - } - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_mcp55[0], sbdn + 0x0a + i - 2); - } - } - - if (bus_mcp55[2]) { - for (i = 0; i < 2; i++) { - dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); - if (dev) { - bus_pcix[0] = bus_mcp55[2]; - bus_pcix[i + 1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/supermicro/h8dme/hda_verb.c b/src/mainboard/supermicro/h8dme/hda_verb.c deleted file mode 100644 index 072a306131..0000000000 --- a/src/mainboard/supermicro/h8dme/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/supermicro/h8dme/irq_tables.c b/src/mainboard/supermicro/h8dme/irq_tables.c deleted file mode 100644 index 2e9bbb8e87..0000000000 --- a/src/mainboard/supermicro/h8dme/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_isa; -extern unsigned char bus_mcp55[8]; //1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/supermicro/h8dme/mptable.c b/src/mainboard/supermicro/h8dme/mptable.c deleted file mode 100644 index 295df50a31..0000000000 --- a/src/mainboard/supermicro/h8dme/mptable.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; //1 - -extern unsigned apicid_mcp55; - -extern unsigned char bus_pcix[3]; // under bus_mcp55_2 - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+1)<<2)|1, apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|0, apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+6)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|2, apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+8)<<2)|0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+9)<<2)|0, apicid_mcp55, 0x15); // 21 - - for(j = 7; j >= 2; j--) { - if(!bus_mcp55[j]) continue; - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2)|i, apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[1], (0x04 << 2)|i, apicid_mcp55, 0x10 + (0+i)%4); - } - - - if(bus_pcix[0]) { - for(i = 0; i < 2; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[2], (4 << 2)|i, apicid_mcp55, 0x10 + (0+i+4-sbdn%4)%4); //16, 17 - } - - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[1], (4 << 2)|i, apicid_mcp55, 0x10 + (2+i+4-sbdn%4)%4); // 18, 19, 16, 17 - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8dme/resourcemap.c b/src/mainboard/supermicro/h8dme/resourcemap.c deleted file mode 100644 index 22c61f49d2..0000000000 --- a/src/mainboard/supermicro/h8dme/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of CPU 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c deleted file mode 100644 index 13cb038102..0000000000 --- a/src/mainboard/supermicro/h8dme/romstage.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> // for enable the FAN -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define SUPERIO_DEV PNP_DEV(0x2e, 0) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#if 0 -/* We don't do any switching yet. */ -#define SMBUS_SWITCH1 0x48 -#define SMBUS_SWITCH2 0x49 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_SWITCH1, device); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); -#endif -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - enable_smbus(); -// smbusx_write_byte(1, (0x58 >> 1), 0, 0x80); /* select bank0 */ - smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -/* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */ -#define RC0 (2 << 8) -#define RC1 (1 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -/* The SPD is being read from the CPU1 (marked CPU2 on the board) and we - don't know how to switch the SMBus to decode the CPU0 SPDs. So, The - memory on each CPU must be an exact match. - */ - static const uint16_t spd_addr[] = { - // Node 0 - RC0 | DIMM0, RC0 | DIMM2, - RC0 | DIMM4, RC0 | DIMM6, - RC0 | DIMM1, RC0 | DIMM3, - RC0 | DIMM5, RC0 | DIMM7, - // Node 1 - RC1 | DIMM0, RC1 | DIMM2, - RC1 | DIMM4, RC1 | DIMM6, - RC1 | DIMM1, RC1 | DIMM3, - RC1 | DIMM5, RC1 | DIMM7, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - winbond_set_clksel_48(SUPERIO_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_mb_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - dump_smbus_registers(); -#endif - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); /* enable in sio_setup */ - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/supermicro/h8dmr/Kconfig b/src/mainboard/supermicro/h8dmr/Kconfig deleted file mode 100644 index 9efc5d2ee2..0000000000 --- a/src/mainboard/supermicro/h8dmr/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -if BOARD_SUPERMICRO_H8DMR - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default supermicro/h8dmr - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "H8DMR-i2" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUPERMICRO_H8DMR diff --git a/src/mainboard/supermicro/h8dmr/Kconfig.name b/src/mainboard/supermicro/h8dmr/Kconfig.name deleted file mode 100644 index 9754fb6f4a..0000000000 --- a/src/mainboard/supermicro/h8dmr/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SUPERMICRO_H8DMR - bool "H8DMR-i2" diff --git a/src/mainboard/supermicro/h8dmr/board_info.txt b/src/mainboard/supermicro/h8dmr/board_info.txt deleted file mode 100644 index b4f8f0b66d..0000000000 --- a/src/mainboard/supermicro/h8dmr/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DMR-i2.cfm diff --git a/src/mainboard/supermicro/h8dmr/cmos.layout b/src/mainboard/supermicro/h8dmr/cmos.layout deleted file mode 100644 index 9e6a9e56f2..0000000000 --- a/src/mainboard/supermicro/h8dmr/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dmr/devicetree.cb b/src/mainboard/supermicro/h8dmr/devicetree.cb deleted file mode 100644 index b36367477d..0000000000 --- a/src/mainboard/supermicro/h8dmr/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/supermicro/h8dmr/get_bus_conf.c b/src/mainboard/supermicro/h8dmr/get_bus_conf.c deleted file mode 100644 index 8b8b2f9ea0..0000000000 --- a/src/mainboard/supermicro/h8dmr/get_bus_conf.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_mcp55[8]; //1 -unsigned apicid_mcp55; - -unsigned char bus_pcix[3]; // under bus_mcp55_2 - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdnb; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - for (i = 0; i < 8; i++) { - bus_mcp55[i] = 0; - } - - for (i = 0; i < 3; i++) { - bus_pcix[i] = 0; - } - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_mcp55[0], sbdn + 0x0a + i - 2); - } - } - - if (bus_mcp55[2]) { - for (i = 0; i < 2; i++) { - dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); - if (dev) { - bus_pcix[0] = bus_mcp55[2]; - bus_pcix[i + 1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/supermicro/h8dmr/hda_verb.c b/src/mainboard/supermicro/h8dmr/hda_verb.c deleted file mode 100644 index 072a306131..0000000000 --- a/src/mainboard/supermicro/h8dmr/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/supermicro/h8dmr/irq_tables.c b/src/mainboard/supermicro/h8dmr/irq_tables.c deleted file mode 100644 index 2e9bbb8e87..0000000000 --- a/src/mainboard/supermicro/h8dmr/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_isa; -extern unsigned char bus_mcp55[8]; //1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/supermicro/h8dmr/mptable.c b/src/mainboard/supermicro/h8dmr/mptable.c deleted file mode 100644 index bb080e515f..0000000000 --- a/src/mainboard/supermicro/h8dmr/mptable.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; //1 - -extern unsigned apicid_mcp55; - -extern unsigned char bus_pcix[3]; // under bus_mcp55_2 - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+1)<<2)|1, apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|0, apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+6)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|2, apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+8)<<2)|0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+9)<<2)|0, apicid_mcp55, 0x15); // 21 - - for(j = 7; j >= 2; j--) { - if(!bus_mcp55[j]) continue; - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2)|i, apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[1], (0x04 << 2)|i, apicid_mcp55, 0x10 + (0+i)%4); - } - - - if(bus_pcix[0]) { - for(i = 0; i < 2; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[2], (4 << 2)|i, apicid_mcp55, 0x10 + (0+i+4-sbdn%4)%4); //16, 17 - } - - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[1], (4 << 2)|i, apicid_mcp55, 0x10 + (2+i+4-sbdn%4)%4); // 18, 19, 16, 17 - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8dmr/resourcemap.c b/src/mainboard/supermicro/h8dmr/resourcemap.c deleted file mode 100644 index 22c61f49d2..0000000000 --- a/src/mainboard/supermicro/h8dmr/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of CPU 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c deleted file mode 100644 index a766f01396..0000000000 --- a/src/mainboard/supermicro/h8dmr/romstage.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> // for enable the FAN -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define SUPERIO_DEV PNP_DEV(0x2e, 0) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - enable_smbus(); -// smbusx_write_byte(1, (0x58 >> 1), 0, 0x80); /* select bank0 */ - smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - winbond_set_clksel_48(SUPERIO_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_mb_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x, %08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); // Need to use TMICT to synchronize FID/VID - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - -// enable_smbus(); /* enable in sio_setup */ - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/technexion/Kconfig b/src/mainboard/technexion/Kconfig deleted file mode 100644 index 163a4bfe6a..0000000000 --- a/src/mainboard/technexion/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if VENDOR_TECHNEXION - -choice - prompt "Mainboard model" - -source "src/mainboard/technexion/*/Kconfig.name" - -endchoice - -source "src/mainboard/technexion/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "Technexion" - -endif # VENDOR_TECHNEXION diff --git a/src/mainboard/technexion/Kconfig.name b/src/mainboard/technexion/Kconfig.name deleted file mode 100644 index 6366ff59b6..0000000000 --- a/src/mainboard/technexion/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_TECHNEXION - bool "Technexion" diff --git a/src/mainboard/technexion/tim5690/Kconfig b/src/mainboard/technexion/tim5690/Kconfig deleted file mode 100644 index 0220d7762b..0000000000 --- a/src/mainboard/technexion/tim5690/Kconfig +++ /dev/null @@ -1,52 +0,0 @@ -if BOARD_TECHNEXION_TIM5690 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select HAVE_ACPI_TABLES - select GFXUMA - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default technexion/tim5690 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "TIM-5690" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_TECHNEXION_TIM5690 diff --git a/src/mainboard/technexion/tim5690/Kconfig.name b/src/mainboard/technexion/tim5690/Kconfig.name deleted file mode 100644 index 24aad25c2c..0000000000 --- a/src/mainboard/technexion/tim5690/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TECHNEXION_TIM5690 - bool "TIM-5690" diff --git a/src/mainboard/technexion/tim5690/Makefile.inc b/src/mainboard/technexion/tim5690/Makefile.inc deleted file mode 100644 index 51202179f1..0000000000 --- a/src/mainboard/technexion/tim5690/Makefile.inc +++ /dev/null @@ -1,22 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -# Needed by irq_tables and mptable and acpi_tables. - -# This is debug message for products of Technexion. -ramstage-y += tn_post_code.c - -ramstage-y += speaker.c -ramstage-$(CONFIG_VGA_ROM_RUN) += vgabios.c diff --git a/src/mainboard/technexion/tim5690/acpi/ide.asl b/src/mainboard/technexion/tim5690/acpi/ide.asl deleted file mode 100644 index d5badfcb6b..0000000000 --- a/src/mainboard/technexion/tim5690/acpi/ide.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/technexion/tim5690/acpi/routing.asl b/src/mainboard/technexion/tim5690/acpi/routing.asl deleted file mode 100644 index bcb14e7e37..0000000000 --- a/src/mainboard/technexion/tim5690/acpi/routing.asl +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/technexion/tim5690/acpi/sata.asl b/src/mainboard/technexion/tim5690/acpi/sata.asl deleted file mode 100644 index 474e5ed6d2..0000000000 --- a/src/mainboard/technexion/tim5690/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/technexion/tim5690/acpi/usb.asl b/src/mainboard/technexion/tim5690/acpi/usb.asl deleted file mode 100644 index dbffa39ad2..0000000000 --- a/src/mainboard/technexion/tim5690/acpi/usb.asl +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -/* If (LLessEqual(UOM5,9)) { -* Scope (\_GPE) { -* Method (_L1A) { -* UCOC() -* if (LEqual(GPB5,PLC5)) { -* Not(PLC5,PLC5) -* Store(PLC5, \_SB.PT5D) -* } -* } -* } -* } -*/ - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/technexion/tim5690/acpi_tables.c b/src/mainboard/technexion/tim5690/acpi_tables.c deleted file mode 100644 index 75834b6c7f..0000000000 --- a/src/mainboard/technexion/tim5690/acpi_tables.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/technexion/tim5690/board_info.txt b/src/mainboard/technexion/tim5690/board_info.txt deleted file mode 100644 index c63907ad01..0000000000 --- a/src/mainboard/technexion/tim5690/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.technexion.com/index.php/embedded-mainboards/amd/tim-5690 diff --git a/src/mainboard/technexion/tim5690/cmos.layout b/src/mainboard/technexion/tim5690/cmos.layout deleted file mode 100644 index 104d51f4c2..0000000000 --- a/src/mainboard/technexion/tim5690/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/technexion/tim5690/devicetree.cb b/src/mainboard/technexion/tim5690/devicetree.cb deleted file mode 100644 index bf462e213a..0000000000 --- a/src/mainboard/technexion/tim5690/devicetree.cb +++ /dev/null @@ -1,112 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "1" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "0" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/technexion/tim5690/dsdt.asl b/src/mainboard/technexion/tim5690/dsdt.asl deleted file mode 100644 index 44da647f8e..0000000000 --- a/src/mainboard/technexion/tim5690/dsdt.asl +++ /dev/null @@ -1,1674 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/sb600/sb600.h> - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "TECHNE", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - //Method(_L03) { - // /* DBGO("\\_GPE\\_L00\n") */ - // Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - //} - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.HPTM) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - //Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/technexion/tim5690/fadt.c b/src/mainboard/technexion/tim5690/fadt.c deleted file mode 100644 index b397f52aea..0000000000 --- a/src/mainboard/technexion/tim5690/fadt.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1 << 3 | 0 << 2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1 << 1 | 1 << 3| 1 << 5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/technexion/tim5690/get_bus_conf.c b/src/mainboard/technexion/tim5690/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/technexion/tim5690/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/technexion/tim5690/irq_tables.c b/src/mainboard/technexion/tim5690/irq_tables.c deleted file mode 100644 index 4c2a48dff7..0000000000 --- a/src/mainboard/technexion/tim5690/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c deleted file mode 100644 index 12050f07fa..0000000000 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> -#include <superio/ite/it8712f/it8712f.h> -#include "tn_post_code.h" -#include "vgabios.h" - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - - -/* Video BIOS Function Extensions Specification - */ -//Callback Sub-Function 00h - Get LCD Panel ID -#define LCD_PANEL_ID_NO 0x00 /* No LCD */ -#define LCD_PANEL_ID_01 0x01 /* 1024x768, 24 bits, 1 channel */ -#define LCD_PANEL_ID_02 0x02 /* 1280x1024, 24 bits, 2 channels */ -#define LCD_PANEL_ID_03 0x03 /* 1440x900, 24 bits, 2 channels */ -#define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */ -#define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */ -#define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */ -//Callback Sub-Function 05h - Select Boot-up TV Standard -#define TV_MODE_00 0x00 /* NTSC */ -#define TV_MODE_01 0x01 /* PAL */ -#define TV_MODE_02 0x02 /* PALM */ -#define TV_MODE_03 0x03 /* PAL60 */ -#define TV_MODE_04 0x04 /* NTSCJ */ -#define TV_MODE_05 0x05 /* PALCN */ -#define TV_MODE_06 0x06 /* PALN */ -#define TV_MODE_09 0x09 /* SCART-RGB */ -#define TV_MODE_NO 0xff /* No TV Support */ - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA SIO_BASE+1 - -/* Global configuration registers. */ -#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ -#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ -#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */ -#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */ - -#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */ -#define IT8712F_SIMPLE_IO_BASE 0x200 /* Simple I/O base address */ - -int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - -/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the - LDN the register belongs to, before you can access the register. */ -static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) -{ - outb(IT8712F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -static void it8712f_enter_conf(void) -{ - /* Enter the configuration state (MB PnP mode). */ - - /* Perform MB PnP setup to put the SIO chip at 0x2e. */ - /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ - /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ - outb(0x87, IT8712F_CONFIGURATION_PORT); - outb(0x01, IT8712F_CONFIGURATION_PORT); - outb(0x55, IT8712F_CONFIGURATION_PORT); - outb(0x55, IT8712F_CONFIGURATION_PORT); -} - -static void it8712f_exit_conf(void) -{ - /* Exit the configuration state (MB PnP mode). */ - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); -} - -/* set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - struct device *sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/* Mainboard specific GPIO setup. */ -static void mb_gpio_init(u16 *iobase) -{ - /* Init Super I/O GPIOs. */ - it8712f_enter_conf(); - outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX); - outb(IT8712F_GPIO, SIO_DATA); - outb(0x62, SIO_INDEX); - outb((*iobase >> 8), SIO_DATA); - outb(0x63, SIO_INDEX); - outb((*iobase & 0xff), SIO_DATA); - it8712f_exit_conf(); -} - -#if IS_ENABLED(CONFIG_VGA_ROM_RUN) -/* The LCD's panel id seletion. */ -static void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id) -{ - switch (num_id) { - case 0x1: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_01; - break; - case 0x2: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_02; - break; - case 0x3: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_03; - break; - case 0x4: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_04; - break; - case 0x5: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_05; - break; - case 0x6: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_06; - break; - default: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_NO; - break; - } -} -#endif - -/************************************************* -* enable the dedicated function in tim5690 board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - u16 gpio_base = IT8712F_SIMPLE_IO_BASE; -#if IS_ENABLED(CONFIG_VGA_ROM_RUN) - rs690_vbios_regs vbios_regs; - u8 port2; -#endif - - printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev); - - mb_gpio_init(&gpio_base); - -#if IS_ENABLED(CONFIG_VGA_ROM_RUN) - /* The LCD's panel id seletion by switch. */ - port2 = inb(gpio_base+1); - lcd_panel_id(&vbios_regs, ((~port2) & 0xf)); - - /* No support TV */ - vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO; - vgabios_init(&vbios_regs); -#endif - - set_thermal_config(); -} - -void mainboard_post(u8 value) -{ - switch (value) { - case POST_ENTER_ELF_BOOT: - technexion_post_code(LED_MESSAGE_FINISH); - break; - } -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c deleted file mode 100644 index 9515931627..0000000000 --- a/src/mainboard/technexion/tim5690/mptable.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/technexion/tim5690/resourcemap.c b/src/mainboard/technexion/tim5690/resourcemap.c deleted file mode 100644 index a513616703..0000000000 --- a/src/mainboard/technexion/tim5690/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_tim5690_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c deleted file mode 100644 index e3f40d1166..0000000000 --- a/src/mainboard/technexion/tim5690/romstage.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <spd.h> -#include <cpu/x86/lapic.h> - -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "tn_post_code.c" -#include "speaker.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - technexion_post_code_init(); - technexion_post_code(LED_MESSAGE_START); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_tim5690_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - speaker_init(255); - speaker_on_nodelay(); - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - technexion_post_code(LED_MESSAGE_RAM); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - speaker_off_nodelay(); - - rs690_before_pci_init(); - sb600_before_pci_init(); -} diff --git a/src/mainboard/technexion/tim5690/speaker.c b/src/mainboard/technexion/tim5690/speaker.c deleted file mode 100644 index 7c0ea6492b..0000000000 --- a/src/mainboard/technexion/tim5690/speaker.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#ifdef __PRE_RAM__ - -#include <arch/cpu.h> -#include "southbridge/amd/sb600/sb600.h" - -#else - -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/amd/sb600/sb600.h" -#include <delay.h> - -#endif /* __PRE_RAM__ */ - -#include "speaker.h" - -void speaker_init(uint8_t time) { - /* SB600 RRG. - * Options_0 - RW - 8 bits - [PM_Reg: 60h]. - * SpkrEn, bit[5]=1b, Setting this bit will configure GPIO2 to be speaker output. - */ -#ifdef __PRE_RAM__ - pmio_write(0x60, (pmio_read(0x60) | (1<<5))); -#else - pm_iowrite(0x60, (pm_ioread(0x60) | (1<<5))); -#endif /* __PRE_RAM__ */ - - /* SB600 RRG. - * Tmr1CntrlWord - RW - 8 bits - [IO_Reg: 43h]. - * ModeSelect, bit[3:1]=011b, Square wave output. - * CmmandSelect, bit[5:4]=11b, Read/write least, and then most significant byte. - * CounterSelect, bit[7:6]=10b, Select counter 2. - */ - outb(0xb6, 0x43); - - - /* SB600 RRG. - * TimerCh2- RW - 8 bits - [IO_Reg: 42h]. - */ - outb(time, 0x42); -} - -void speaker_on_nodelay(void) { - /* SB600 RRG. - * Nmi_Status - RW - 8 bits - [IO_Reg: 61h]. - * SpkrEnable, bit[0]=1b, Enable counter 2 - * SpkrTmrEnable, bit[1]=1b, Speaker timer on - */ - outb(inb(0x61) | 0x03, 0x61); -} - -void speaker_on_delay(void) { - speaker_on_nodelay(); - mdelay(100); -} - -void speaker_off_nodelay(void) { - /* SB600 RRG. - * Nmi_Status - RW - 8 bits - [IO_Reg: 61h]. - * SpkrEnable, bit[0]=0b, Disable counter 2 - * SpkrTmrEnable, bit[1]=0b, Speaker timer off - */ - outb(inb(0x61) & ~0x03, 0x61); -} - -void speaker_off_delay(void) { - speaker_off_nodelay(); - mdelay(100); -} diff --git a/src/mainboard/technexion/tim5690/speaker.h b/src/mainboard/technexion/tim5690/speaker.h deleted file mode 100644 index bb544b0bce..0000000000 --- a/src/mainboard/technexion/tim5690/speaker.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -void speaker_init(uint8_t time); -void speaker_on_nodelay(void); -void speaker_off_nodelay(void); -void speaker_on_delay(void); -void speaker_off_delay(void); diff --git a/src/mainboard/technexion/tim5690/tn_post_code.c b/src/mainboard/technexion/tim5690/tn_post_code.c deleted file mode 100644 index 607c44664a..0000000000 --- a/src/mainboard/technexion/tim5690/tn_post_code.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#ifdef __PRE_RAM__ - -#include <arch/cpu.h> -#include "southbridge/amd/sb600/sb600.h" - -#else - -#include <device/pci.h> -#include <device/pci_ids.h> - -#endif - -#include "tn_post_code.h" - - -#ifdef __SIMPLE_DEVICE__ - -// TechNexion's Post Code Initially. -void technexion_post_code_init(void) -{ - uint8_t reg8_data; - pci_devfn_t dev = 0; - - // SMBus Module and ACPI Block (Device 20, Function 0) - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); - - // LED[bit0]:GPIO0 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x60); - reg8_data |= (1 << 7); // 1: GPIO if not used by SATA - pmio_write(0x60, reg8_data); - - reg8_data = pci_read_config8(dev, 0x80); - reg8_data = ((reg8_data | (1 << 0)) & ~(1 << 4)); - pci_write_config8(dev, 0x80, reg8_data); - - // LED[bit1]:GPIO1 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0x80); - reg8_data = ((reg8_data | (1 << 1)) & ~(1 << 5)); - pci_write_config8(dev, 0x80, reg8_data); - - // LED[bit2]:GPIO4 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x5e); - reg8_data &= ~(1 << 7); // 0: GPIO if not used by SATA - pmio_write(0x5e, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1 << 0); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1 << 0); - pci_write_config8(dev, 0xa9, reg8_data); - - // LED[bit3]:GPIO6 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x60); - reg8_data |= (1 << 7); // 1: GPIO if not used by SATA - pmio_write(0x60, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1 << 2); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1 << 2); - pci_write_config8(dev, 0xa9, reg8_data); - // LED[bit4]:GPIO7 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1 << 3); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1 << 3); - pci_write_config8(dev, 0xa9, reg8_data); - - // LED[bit5]:GPIO8 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1 << 4); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1 << 4); - pci_write_config8(dev, 0xa9, reg8_data); - - // LED[bit6]:GPIO10 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0xab); - reg8_data = ((reg8_data | (1 << 0)) & ~(1 << 1)); - pci_write_config8(dev, 0xab, reg8_data); - - // LED[bit7]:GPIO66 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x68); - reg8_data &= ~(1 << 5); // 0: GPIO - pmio_write(0x68, reg8_data); - - reg8_data = pci_read_config8(dev, 0x7e); - reg8_data = ((reg8_data | (1 << 1)) & ~(1 << 5)); - pci_write_config8(dev, 0x7e, reg8_data); - -} - -#endif - -/* TechNexion's Post Code. - */ -void technexion_post_code(uint8_t udata8) -{ - uint8_t u8_data; - - // SMBus Module and ACPI Block (Device 20, Function 0) -#ifdef __SIMPLE_DEVICE__ - pci_devfn_t dev = 0; - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); -#else - struct device *dev = NULL; - dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0); -#endif - - udata8 = ~(udata8); - - // LED[bit0]:GPIO0 - u8_data = pci_read_config8(dev, 0x80); - if (udata8 & 0x1) { - u8_data |= (1 << 0); - } - else { - u8_data &= ~(1 << 0); - } - pci_write_config8(dev, 0x80, u8_data); - - // LED[bit1]:GPIO1 - u8_data = pci_read_config8(dev, 0x80); - if (udata8 & 0x2) { - u8_data |= (1 << 1); - } - else { - u8_data &= ~(1 << 1); - } - pci_write_config8(dev, 0x80, u8_data); - - // LED[bit2]:GPIO4 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x4) { - u8_data |= (1 << 0); - } - else { - u8_data &= ~(1 << 0); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit3]:GPIO6 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x8) { - u8_data |= (1 << 2); - } - else { - u8_data &= ~(1 << 2); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit4]:GPIO7 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x10) { - u8_data |= (1 << 3); - } - else { - u8_data &= ~(1 << 3); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit5]:GPIO8 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x20) { - u8_data |= (1 << 4); - } - else { - u8_data &= ~(1 << 4); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit6]:GPIO10 - u8_data = pci_read_config8(dev, 0xab); - if (udata8 & 0x40) { - u8_data |= (1 << 0); - } - else { - u8_data &= ~(1 << 0); - } - pci_write_config8(dev, 0xab, u8_data); - - // LED[bit7]:GPIO66 - u8_data = pci_read_config8(dev, 0x7e); - if (udata8 & 0x80) { - u8_data |= (1 << 1); - } - else { - u8_data &= ~(1 << 1); - } - pci_write_config8(dev, 0x7e, u8_data); - -} diff --git a/src/mainboard/technexion/tim5690/tn_post_code.h b/src/mainboard/technexion/tim5690/tn_post_code.h deleted file mode 100644 index e969ea83cc..0000000000 --- a/src/mainboard/technexion/tim5690/tn_post_code.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define LED_MESSAGE_START 0xFF -#define LED_MESSAGE_FINISH 0x99 -#define LED_MESSAGE_RAM 0x01 - - -#ifdef __PRE_RAM__ - -// TechNexion's Post Code Initially. -void technexion_post_code_init(void); - -#endif - -void technexion_post_code(uint8_t udata8); diff --git a/src/mainboard/technexion/tim5690/vgabios.c b/src/mainboard/technexion/tim5690/vgabios.c deleted file mode 100644 index fe4b41cde9..0000000000 --- a/src/mainboard/technexion/tim5690/vgabios.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <console/console.h> -#include <arch/interrupt.h> -#include "vgabios.h" -#include <x86emu/regs.h> - - -int tim5690_int15_handler(void); - -static rs690_vbios_regs vbios_regs_local; - -/* Initialization interrupt function */ -static void vbios_fun_init(rs690_vbios_regs *vbios_regs) -{ - vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id; - vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard; -} - -/* BIOS int15 function */ -int tim5690_int15_handler(void) -{ - int res = 0; - - printk(BIOS_DEBUG, "tim5690_int15_handler\n"); - - switch (X86_EAX & 0xffff) { - case AMD_RS690_INT15: - switch (X86_EBX & 0xff) { - case 0x00: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id; - res = 1; - break; - case 0x05: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard; - res = 1; - break; - } - break; - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", - X86_EAX & 0xffff); - break; - } - - return res; -} - -/* Initialization VBIOS function */ -void vgabios_init(rs690_vbios_regs *vbios_regs) -{ - printk(BIOS_DEBUG, "vgabios_init\n"); - - mainboard_interrupt_handlers(0x15, &tim5690_int15_handler); - vbios_fun_init(vbios_regs); -} diff --git a/src/mainboard/technexion/tim5690/vgabios.h b/src/mainboard/technexion/tim5690/vgabios.h deleted file mode 100644 index f6ad63e7a5..0000000000 --- a/src/mainboard/technexion/tim5690/vgabios.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* AMD Chipset */ -#define AMD_RS690_INT15 0x4E08 - -typedef struct __rs690_int15_regs__ -{ - u8 fun00_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID - u8 fun05_tv_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard -}rs690_int15_regs; - -typedef struct __rs690_vbios_regs__ -{ - rs690_int15_regs int15_regs; -}rs690_vbios_regs; - -/* Initialization VBIOS function */ -extern void vgabios_init(rs690_vbios_regs *vbios_regs); diff --git a/src/mainboard/technexion/tim8690/Kconfig b/src/mainboard/technexion/tim8690/Kconfig deleted file mode 100644 index ad80e853c3..0000000000 --- a/src/mainboard/technexion/tim8690/Kconfig +++ /dev/null @@ -1,51 +0,0 @@ -if BOARD_TECHNEXION_TIM8690 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default technexion/tim8690 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "TIM-8690" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_TECHNEXION_TIM8690 diff --git a/src/mainboard/technexion/tim8690/Kconfig.name b/src/mainboard/technexion/tim8690/Kconfig.name deleted file mode 100644 index 6080e4e564..0000000000 --- a/src/mainboard/technexion/tim8690/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TECHNEXION_TIM8690 - bool "TIM-8690" diff --git a/src/mainboard/technexion/tim8690/acpi/ide.asl b/src/mainboard/technexion/tim8690/acpi/ide.asl deleted file mode 100644 index d5badfcb6b..0000000000 --- a/src/mainboard/technexion/tim8690/acpi/ide.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/technexion/tim8690/acpi/routing.asl b/src/mainboard/technexion/tim8690/acpi/routing.asl deleted file mode 100644 index bcb14e7e37..0000000000 --- a/src/mainboard/technexion/tim8690/acpi/routing.asl +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/technexion/tim8690/acpi/sata.asl b/src/mainboard/technexion/tim8690/acpi/sata.asl deleted file mode 100644 index 474e5ed6d2..0000000000 --- a/src/mainboard/technexion/tim8690/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/technexion/tim8690/acpi/usb.asl b/src/mainboard/technexion/tim8690/acpi/usb.asl deleted file mode 100644 index 638690697c..0000000000 --- a/src/mainboard/technexion/tim8690/acpi/usb.asl +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/technexion/tim8690/acpi_tables.c b/src/mainboard/technexion/tim8690/acpi_tables.c deleted file mode 100644 index 75834b6c7f..0000000000 --- a/src/mainboard/technexion/tim8690/acpi_tables.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/technexion/tim8690/board_info.txt b/src/mainboard/technexion/tim8690/board_info.txt deleted file mode 100644 index dbda07e41b..0000000000 --- a/src/mainboard/technexion/tim8690/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.technexion.com/index.php/tim-8690 diff --git a/src/mainboard/technexion/tim8690/cmos.layout b/src/mainboard/technexion/tim8690/cmos.layout deleted file mode 100644 index 104d51f4c2..0000000000 --- a/src/mainboard/technexion/tim8690/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/technexion/tim8690/devicetree.cb b/src/mainboard/technexion/tim8690/devicetree.cb deleted file mode 100644 index 8d1df8be10..0000000000 --- a/src/mainboard/technexion/tim8690/devicetree.cb +++ /dev/null @@ -1,115 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/technexion/tim8690/dsdt.asl b/src/mainboard/technexion/tim8690/dsdt.asl deleted file mode 100644 index ae82a2a300..0000000000 --- a/src/mainboard/technexion/tim8690/dsdt.asl +++ /dev/null @@ -1,1674 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/sb600/sb600.h> - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "TECHNE", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.HPTM) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/technexion/tim8690/fadt.c b/src/mainboard/technexion/tim8690/fadt.c deleted file mode 100644 index f9768b20bd..0000000000 --- a/src/mainboard/technexion/tim8690/fadt.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/technexion/tim8690/get_bus_conf.c b/src/mainboard/technexion/tim8690/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/technexion/tim8690/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/technexion/tim8690/irq_tables.c b/src/mainboard/technexion/tim8690/irq_tables.c deleted file mode 100644 index 4c2a48dff7..0000000000 --- a/src/mainboard/technexion/tim8690/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/technexion/tim8690/mainboard.c b/src/mainboard/technexion/tim8690/mainboard.c deleted file mode 100644 index 2f2b453994..0000000000 --- a/src/mainboard/technexion/tim8690/mainboard.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - - - -/*************************************************** -* This board, the TIM-8690 has two Marvel 88e5056 PCI-E -* 10/100/1000 chips on board. -* Both of their pin PERSTn pins are connected to GPIO 5 of the -* SB600 southbridge. -****************************************************/ -static void enable_onboard_nic(void) -{ - - u8 byte; - struct device *sm_dev; - - printk(BIOS_INFO, "enable_onboard_nic.\n"); - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0x9a); - byte |= ( 1 << 7); - pci_write_config8(sm_dev, 0x9a, byte); - - byte = pm_ioread(0x59); - byte &= ~( 1<< 5); - pm_iowrite(0x59,byte); - - byte = pci_read_config8(sm_dev, 0xA8); - - byte |= (1 << 1); //set bit 1 to high - pci_write_config8(sm_dev, 0xA8, byte); -} - -/* set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - struct device *sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in tim8690 board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/technexion/tim8690/mptable.c b/src/mainboard/technexion/tim8690/mptable.c deleted file mode 100644 index 9515931627..0000000000 --- a/src/mainboard/technexion/tim8690/mptable.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, - 0x11,(void *) dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/technexion/tim8690/resourcemap.c b/src/mainboard/technexion/tim8690/resourcemap.c deleted file mode 100644 index 20a8d91bee..0000000000 --- a/src/mainboard/technexion/tim8690/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_tim8690_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c deleted file mode 100644 index 67d0b06470..0000000000 --- a/src/mainboard/technexion/tim8690/romstage.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <spd.h> -#include <cpu/x86/lapic.h> - -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_tim8690_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6 ) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - rs690_before_pci_init(); - sb600_before_pci_init(); -} diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig deleted file mode 100644 index 66c885d424..0000000000 --- a/src/mainboard/tyan/s2912/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -if BOARD_TYAN_S2912 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select SUPERIO_WINBOND_W83627HF - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default tyan/s2912 - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "S2912" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 1 - -endif # BOARD_TYAN_S2912 diff --git a/src/mainboard/tyan/s2912/Kconfig.name b/src/mainboard/tyan/s2912/Kconfig.name deleted file mode 100644 index f8f8828808..0000000000 --- a/src/mainboard/tyan/s2912/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TYAN_S2912 - bool "S2912 (Thunder n3600R)" diff --git a/src/mainboard/tyan/s2912/board_info.txt b/src/mainboard/tyan/s2912/board_info.txt deleted file mode 100644 index 0e2b6df6fa..0000000000 --- a/src/mainboard/tyan/s2912/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Thunder n3600R (S2912) -Category: server -Board URL: http://www.tyan.com/product_board_detail.aspx?pid=157 -Release year: 2007 diff --git a/src/mainboard/tyan/s2912/cmos.layout b/src/mainboard/tyan/s2912/cmos.layout deleted file mode 100644 index 9e6a9e56f2..0000000000 --- a/src/mainboard/tyan/s2912/cmos.layout +++ /dev/null @@ -1,69 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/tyan/s2912/devicetree.cb b/src/mainboard/tyan/s2912/devicetree.cb deleted file mode 100644 index 42f764a35f..0000000000 --- a/src/mainboard/tyan/s2912/devicetree.cb +++ /dev/null @@ -1,138 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10f1 0x2912 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c deleted file mode 100644 index d13f737aa1..0000000000 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -unsigned pci1234x[] = -{ - // Here you only need to set value in pci1234 for HT-IO that could be - // installed or not. - // You may need to preset pci1234 for HTIO board, please refer to - // src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -unsigned hcdnx[] = -{ - // HT Chain device num, actually it is unit id base of every ht device - // in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base; - struct mb_sysconf_t *m; - - device_t dev; - int i; - - if(get_bus_conf_done == 1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } - - for(i = 2; i < 8; i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_mcp55 = apicid_base+0; -} diff --git a/src/mainboard/tyan/s2912/irq_tables.c b/src/mainboard/tyan/s2912/irq_tables.c deleted file mode 100644 index 1c997d8db2..0000000000 --- a/src/mainboard/tyan/s2912/irq_tables.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/tyan/s2912/mb_sysconf.h b/src/mainboard/tyan/s2912/mb_sysconf.h deleted file mode 100644 index ddd6cfe38f..0000000000 --- a/src/mainboard/tyan/s2912/mb_sysconf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/tyan/s2912/mptable.c b/src/mainboard/tyan/s2912/mptable.c deleted file mode 100644 index 9b46ad68a2..0000000000 --- a/src/mainboard/tyan/s2912/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - - for(j = 7; j >= 2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00 << 2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(j = 0; j < 1; j++) - for(i = 0; i < 4; i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/tyan/s2912/resourcemap.c b/src/mainboard/tyan/s2912/resourcemap.c deleted file mode 100644 index 9ac7ae4536..0000000000 --- a/src/mainboard/tyan/s2912/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, -// PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, -// PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of CPU 0 --> Nvidia MCP55 Pro */ -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of CPU 0 --> nvidia io55 */ - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c deleted file mode 100644 index 1650d3d38c..0000000000 --- a/src/mainboard/tyan/s2912/romstage.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - /*serial 0 */ - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - setup_mb_resource_map(); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); // Need to use TMICT to synchronize FID/VID - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} diff --git a/src/mainboard/winent/mb6047/Kconfig b/src/mainboard/winent/mb6047/Kconfig deleted file mode 100644 index 5a3b81d604..0000000000 --- a/src/mainboard/winent/mb6047/Kconfig +++ /dev/null @@ -1,65 +0,0 @@ -if BOARD_WINENT_MB6047 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_WINBOND_W83627THG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select CK804_USE_NIC - select CK804_USE_ACI - select SET_FIDVID - -config MAINBOARD_DIR - string - default winent/mb6047 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "MB6047" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config CK804_PCI_E_X - int - default 0 - -config VGA_BIOS_ID - string - default "126f,0720" - -config VGA_BIOS_FILE - string - default "DM22383.ROM" - -endif # BOARD_WINENT_MB6047 diff --git a/src/mainboard/winent/mb6047/Kconfig.name b/src/mainboard/winent/mb6047/Kconfig.name deleted file mode 100644 index 9997dd6a27..0000000000 --- a/src/mainboard/winent/mb6047/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_WINENT_MB6047 - bool "MB6047" diff --git a/src/mainboard/winent/mb6047/acpi_tables.c b/src/mainboard/winent/mb6047/acpi_tables.c deleted file mode 100644 index 6302c1da89..0000000000 --- a/src/mainboard/winent/mb6047/acpi_tables.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <assert.h> - -/* APIC */ -unsigned long acpi_fill_madt(unsigned long current) -{ - struct device *dev; - struct resource *res; - - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write NVIDIA CK804 IOAPIC. */ - dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); - ASSERT(dev != NULL); - - res = find_resource(dev, PCI_BASE_ADDRESS_1); - ASSERT(res != NULL); - - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 4, - res->base, 0); - /* Initialize interrupt mapping if mptable.c didn't. */ -#if (!CONFIG_GENERATE_MP_TABLE) - pci_write_config32(dev, 0x7c, 0x0120d218); - pci_write_config32(dev, 0x80, 0x12008a00); - pci_write_config32(dev, 0x84, 0x0000007d); -#endif - - /* IRQ9 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* create all subtables for processors */ - /* acpi_create_madt_lapic_nmis returns current, not size. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/winent/mb6047/board_info.txt b/src/mainboard/winent/mb6047/board_info.txt deleted file mode 100644 index 7680e6f854..0000000000 --- a/src/mainboard/winent/mb6047/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/winent/mb6047/cmos.layout b/src/mainboard/winent/mb6047/cmos.layout deleted file mode 100644 index 9cd93c72da..0000000000 --- a/src/mainboard/winent/mb6047/cmos.layout +++ /dev/null @@ -1,53 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 8 h 0 century -408 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/winent/mb6047/devicetree.cb b/src/mainboard/winent/mb6047/devicetree.cb deleted file mode 100644 index 98a9247e5d..0000000000 --- a/src/mainboard/winent/mb6047/devicetree.cb +++ /dev/null @@ -1,120 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10de 0xcb84 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # Consumer IR - device pnp 2e.7 off end # Game port, MIDI, GPIO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic # DIMM 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic # DIMM 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # DIMM 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic # DIMM 0-1-1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # DIMM 1-0-0 - # device i2c 54 on end - # end - # chip drivers/generic/generic # DIMM 1-0-1 - # device i2c 55 on end - # end - # chip drivers/generic/generic # DIMM 1-1-0 - # device i2c 56 on end - # end - # chip drivers/generic/generic # DIMM 1-1-1 - # device i2c 57 on end - # end - end - # device pci 1.1 on # SM 1 - # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 - # device i2c 2d on end - # end - # chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 - # device i2c 2e on end - # end - # chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN - # device i2c 2a on end - # end - # chip drivers/generic/generic # Winbond HWM 0x92 - # device i2c 49 on end - # end - # chip drivers/generic/generic # Winbond HWM 0x94 - # device i2c 4a on end - # end - # end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on # PCI - # device pci 6.0 on end - end - device pci a.0 on end # NIC - device pci b.0 on end # PCI E 3 - device pci c.0 on end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "0" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end # Link 2 == LDT 2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/winent/mb6047/dsdt.asl b/src/mainboard/winent/mb6047/dsdt.asl deleted file mode 100644 index 43b4535957..0000000000 --- a/src/mainboard/winent/mb6047/dsdt.asl +++ /dev/null @@ -1,206 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - Name (PICM, 0x00) - Method (_PIC, 1, Serialized) { - Store (Arg0, PICM) - } - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device (CK804) */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - \_SB.GXXX(node, link) - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - #include "southbridge/nvidia/ck804/acpi/ck804.asl" - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LUOH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LUEH, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LAUD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LMOD, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LPA0, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LSA0, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LSA1, 0x00 }, - Package (0x04) { 0x000AFFFF, 0x00, \_SB.PCI0.LEMA, 0x00 }, - }) - - Device (PCIL) - { - Name (_ADR, 0x00090000) - Name (_UID, 0x00) - Name (_PRT, Package () { - /* onboard SM720 VGA */ - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x000e0000) - Name (_UID, 0x00) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x000d0000) - Name (_UID, 0x00) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - }) - } - - Device (PEX2) - { - Name (_ADR, 0x000c0000) - Name (_UID, 0x00) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - }) - } - - Device (PEX3) - { - Name (_ADR, 0x000b0000) - Name (_UID, 0x00) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - }) - } - - Device (ISA) { - Name (_HID, EisaId ("PNP0A05")) - Name (_ADR, 0x00010000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - } - } - } -} diff --git a/src/mainboard/winent/mb6047/get_bus_conf.c b/src/mainboard/winent/mb6047/get_bus_conf.c deleted file mode 100644 index de79fa05a7..0000000000 --- a/src/mainboard/winent/mb6047/get_bus_conf.c +++ /dev/null @@ -1,98 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_ck804_0; //1 -unsigned char bus_ck804_1; //2 -unsigned char bus_ck804_2; //3 -unsigned char bus_ck804_3; //4 -unsigned char bus_ck804_4; //5 -unsigned char bus_ck804_5; //6 -unsigned apicid_ck804; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000000, -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff; - - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x09); - - bus_ck804_1 = 2; - bus_ck804_4 = 3; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0d); - - bus_ck804_5 = bus_ck804_4 + 1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); - if (dev) - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - else - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0e); - -/*I/O APICs: APIC ID Version State Address*/ - apicid_base = get_apicid_base(1); - apicid_ck804 = apicid_base + 0; -} diff --git a/src/mainboard/winent/mb6047/irq_tables.c b/src/mainboard/winent/mb6047/irq_tables.c deleted file mode 100644 index 885f9e927e..0000000000 --- a/src/mainboard/winent/mb6047/irq_tables.c +++ /dev/null @@ -1,151 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_ck804_0; //1 -extern unsigned char bus_ck804_1; //2 -extern unsigned char bus_ck804_2; //3 -extern unsigned char bus_ck804_3; //4 -extern unsigned char bus_ck804_4; //5 -extern unsigned char bus_ck804_5; //6 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_ck804_0; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 9) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - -#if 0 -//smbus - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 1) << 3) | 0, 0x2, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//usb - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 2) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//audio - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 4) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 7) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 8) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn + 0xa) << 3) | 0, 0x1, - 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//Slot1 PCIE x16 - write_pirq_info(pirq_info, bus_ck804_5, (0 << 3) | 0, 0x3, 0xdef8, 0x4, - 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); - pirq_info++; - slot_num++; - -//firewire - write_pirq_info(pirq_info, bus_ck804_1, (0x5 << 3) | 0, 0x3, 0xdef8, 0, - 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//Slot2 pci - write_pirq_info(pirq_info, bus_ck804_1, (0x4 << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); - pirq_info++; - slot_num++; -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/winent/mb6047/mainboard.c b/src/mainboard/winent/mb6047/mainboard.c deleted file mode 100644 index 7d9516b4f5..0000000000 --- a/src/mainboard/winent/mb6047/mainboard.c +++ /dev/null @@ -1,55 +0,0 @@ -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <superio/winbond/w83627thg/w83627thg.h> - -static void hwm_write(u16 base, u8 bank, u8 reg, u8 value) -{ - outb(0x4e, base + 0x05); - outb(bank, base + 0x06); - outb(reg, base + 0x05); - outb(value, base + 0x06); -} - -static void mb6047_hwm_init(void) -{ - struct device *dev; - struct resource *res; - size_t i; - - static const struct { u8 bnk; u8 idx; u8 dat; } hwmtab[] = { - { 0x00, 0x5d, 0x05 }, /* CPUTIN diode */ - { 0x04, 0x55, 0x32 }, /* CPUTIN offset */ - { 0x00, 0x4e, 0x00 }, /* reset bank */ - }; - - dev = dev_find_slot_pnp(0x2e, W83627THG_HWM); - if (dev == NULL) - return; - - res = find_resource(dev, PNP_IDX_IO0); - if (res == NULL) - return; - - printk(BIOS_INFO, "setting up hardware monitor at 0x%04x\n", (unsigned int)res->base); - - /* Init hardware monitor. */ - for (i = 0; i < ARRAY_SIZE(hwmtab); i++) - hwm_write(res->base, hwmtab[i].bnk, hwmtab[i].idx, hwmtab[i].dat); -} - -static void mb6047_mainboard_init(struct device *dev) -{ - mb6047_hwm_init(); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = mb6047_mainboard_init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/winent/mb6047/mptable.c b/src/mainboard/winent/mb6047/mptable.c deleted file mode 100644 index 407c59c7e6..0000000000 --- a/src/mainboard/winent/mb6047/mptable.c +++ /dev/null @@ -1,109 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804_0; //1 -extern unsigned char bus_ck804_1; //2 -extern unsigned char bus_ck804_2; //3 -extern unsigned char bus_ck804_3; //4 -extern unsigned char bus_ck804_4; //5 -extern unsigned char bus_ck804_5; //6 -extern unsigned apicid_ck804; - - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, apicid_ck804, 0x11, - res2mmio(res, 0, 0)); - - /* Initialize interrupt mapping*/ - - dword = 0x0120d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0x0000007d; - pci_write_config32(dev, 0x84, dword); - } - - - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 1); - -// Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_0, ((sbdn + 1) << 2) | 1, apicid_ck804, 0xa); - -// Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_0, ((sbdn + 2) << 2) | 0, apicid_ck804, 0x15); - -// Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_0, ((sbdn + 2) << 2 ) | 1, apicid_ck804, 0x14); - -// Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_0, ((sbdn + 7) << 2 ) | 0, apicid_ck804, 0x17); - -// Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_0, ((sbdn + 8) << 2) | 0, apicid_ck804, 0x16); - -//Slot PCIE x16 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_5, (0x00 << 2) | i, apicid_ck804, 0x10 + (2 + i + 4 - sbdn%4)%4); - -//Slot PCIE x4 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_4, (0x00 << 2) | i, apicid_ck804, 0x10 + (1 + i + 4 - sbdn%4)%4); - -//Onboard SM720 VGA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_ck804_1, (6 << 2) | 0, apicid_ck804, 0x13); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/winent/mb6047/romstage.c b/src/mainboard/winent/mb6047/romstage.c deleted file mode 100644 index 29def69d72..0000000000 --- a/src/mainboard/winent/mb6047/romstage.c +++ /dev/null @@ -1,147 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include <southbridge/nvidia/ck804/early_smbus.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) - -static void memreset_setup(void) { } -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/ck804/early_setup_ss.h> -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#if IS_ENABLED(CONFIG_SET_FIDVID) -#include "cpu/amd/model_fxx/fidvid.c" -#endif -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - /* subject decoding*/ - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - /* Serial 0, Serial 1 */ - dword |= (1 << 0) | (1 << 1); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - DIMM0, 0, 0, 0, - DIMM1, 0, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - -// post_code(0x32); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); -#endif - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - if ((cpuid_edx(0x80000007) & 0x6) == 0x6) { - msr_t msr; - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); - dump_smbus_registers(); -#endif - - memreset_setup(); - sdram_initialize(nodes, ctrl); - -#if 0 - print_pci_devices(); - dump_pci_devices(); -#endif -} |